Viking Ultra Bor 2012

ULTRABORSuperSuper Premium

America’s Finest High - Speed Steel Cutting Tools

www.vikingdrill.com

Proudly Manufactured in the U.S.A.

Proudly Manufactured in the U.S.A . www.vikingdrill.com

11

WHY CHOOSE ULTRA BOR?� SUBSTANTIALLY LONGER CUTTING LIFE The nitro-carburized flute has an increased Rockwell hardness.

� CUTS HARDER MATERIALS The flatter point takes a smaller chip. More torque is directed to a smaller area. This allows drillinginto materials with hardness of over 30 on the Rockwell "C" scale.

� STOPS DRILL WALKINGThe split point design gives accurate starting without the use of a center punch.

� HOLDS TIGHTER HOLE SIZE The split point design is self centering. This limits the normal oversize drilling characteristics.

� OUTSTANDING QUALITY APPEARANCE The rich amber gold color sets it apart from commodity cutting tools.

� RUNS COOLER, USES LESS TORQUE135° point takes a smaller chip resulting in less heat. Friction is reduced by the amber gold surface treatment.

� STOPS CHUCK SLIPPAGEFlats on drill shanks allow easy positive chuck grip.

WEBULTRA BOR

WEBCOBALT

ULTRA BOR VS. COBALTA Ultra Bor drill with its thin web will

penetrate the work hardening stainless fastenough to continually cut beneath the chipwhich is hardening from deformation. This means the drill is cutting softer steel.

The cobalt drill, with its thick web, cannot befed at a fast enough rate to cut beneath thearea which is hardening. As a result thecobalt drill is continually drilling into

hardened steel.

ULTRA BOR PERFORMANCEUltra Bor drills will substantially outperform cobalt drills in work hardening stainlesssteel applications. This performance advantage is the result of construction differ-ences between the two types of drills. Cobalt drills, manufactured to Type J NAS907 specs, have a very thick web. This web is necessary to limit breakage of thebrittle cobalt steel.

Ultra Bor drills are made of special hi-moly tool steel, which is much tougher thancobalt steel. The web on a Ultra Bor drill can be thinned considerably due to thetoughness of the steel. A Ultra Bor drill with its thin web will penetrate the workhardening stainless fast enough to continually cut beneath the chip which is hard-ening from deformation.

This means the drill is cutting softer steel. The cobalt drill, with its thick web, cannotbe fed at a fast enough rate to cut beneath the area which is hardening. As a result the cobalt drill is continually drilling into hardened steel.

STAINLESS STEEL - WORK HARDENING VS. FREE MACHININGWork hardening grades of stainless steel are the 300 series (with the exceptionof 303), which is free machining. Free machining grades include the 400 series inaddition to type 303.

A quick way to identify work hardening vs free machining stainless steel is toobserve the chip formation. Work hardening chips break up during the drillingprocess, while free machining chips are long and stringy.

COBALT APPLICATIONSCobalt drills are recommended for free machining stainless (400 series & 303),titanium alloys and other high tensile strength materials.

These applications require the high red hot hardness of cobalt steel to counter the substantial heat generated in the drilling process.

www.vikingdrill.com Proudly Manufactured in the U.S.A.

Part DiameterNo. Inches05580 1/1605590 5/6405600 3/3205610 7/6405620 1/805630 9/6405640 5/3205650 11/6405660 3/1605670 13/6405680 7/3205690 15/6405700 1/405710 17/6405720 9/3205730 19/6405740 5/1605750 21/6405760 11/3205770 23/6405780 3/805790 25/6405800 13/3205810 27/6405820 7/1605830 29/6405840 15/3205850 31/6405860 1/222210 33/6422220 17/3222230 35/6422240 9/1622250 37/6422260 19/3222270 39/6422280 5/822290 41/6422300 21/3222310 43/6422320 11/1622330 45/6422340 23/3222350 47/6422360 3/4

FRACTIONALPart LetterNo. Size39460 A39470 B39480 C39490 D39500 E39510 F39520 G39530 H39540 I39550 J39560 K39570 L39580 M39590 N39600 O39610 P39620 Q39630 R39640 S39650 T39660 U39670 V39680 W39690 X39700 Y39710 Z

LETTER

TTyyppee 227788--UUBBReduced ShankDrill is a Type 240-UB with a 3/8" reduced shank.

• Special Hi-Molybdenum tool steel.

• 135° split point for fast penetration and accurate starting without center punch.

• Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.

• Body and clearance are gold surface treated for maximum lubricity.

• Heat treated at 2185° F and then nitro-carburize finished at 950° F to be measurably harder than high-speed steel.

• Space age nitro-carburized steel withstands substantially higher drilling temperatures while maintaining sharpness.

• Recommended for use in work hardening grades of stainless steel and other hard metal drilling applications.

Part DiameterNo. Inches59200 25/6459210 13/3259220 27/6459230 7/1659240 29/6459250 15/3259260 31/6459270 1/259280 17/3259290 9/1659300 19/3259310 5/8

3/8" SHANK

JOBBER LENGTH DRILLSTTyyppee 224400--UUBB135˚ Split PointSpecial Hi-Molybdenum tool steel. 135° split point for fast penetration and accurate starting without a center punch. Precision ground point,flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated formaximum lubricity. Drills are heat treated at 2185° F and then nitro-carburize finished at 950° F to be measurably harder than high-speed steel. Space age nitro-carburized steel withstands substantially higher drilling temperatures while maintaining sharpness. Recommended for use in work hardeninggrades of stainless steel and other hard metal drilling applications. Sizes smaller than #52 have non-split points.

SETS TYPE 240-UB

Part WireNo. Size38940 138950 238960 338970 438980 538990 639000 739010 839020 939030 1039040 1139050 1239060 1339070 1439080 1539090 1639100 1739110 1839120 1939130 2039140 2139150 2239160 2339170 2439180 2539190 2639200 2739210 2839220 2939230 3092310 3192300 3292290 3392280 3492270 3592260 3692250 3792240 3892230 3992220 4088420 4188410 4288400 4388390 4488380 4588370 4688360 4788350 4888340 4988330 5088320 5188310 5288300 5388290 5488280 5588270 5688260 5788250 5888240 5988230 60

WIRE

Part DescriptionNo. of SizesSP-13 13 pc set44110 1/16-1/4 by 64thsSP-15 15 pc set44120 1/16-1/2 by 32ndsSP-21 21 pc set44130 1/16-3/8 by 64thsSP-26 26 pc set88660 A-ZSP-29 29 pc set44150 1/16-1/2 by 64thsSP-60 60 pc set88640 1-60SP-115 115 pc set93840 1/16-1/2 by 64ths

+ A-Z & 1-60TRI-1SP 13 pc set06510 1/16-1/4 by 64ths

SETS ULTRA-DEX Part DescriptionNo. of SizesSP-29P - Ultra Dex44170 1/16 thru 1/2 by 64ths

22

SETS TYPE 240-UB

ULTRA BO

R SUPER PREM

IUM

SETS TYPE 278-UB

Part No. Description of SizesSP-21R 21 pc set92170 1/16-1/4 by 64ths,

9/32-1/2 x 32ndsRSP-15 15 pc set92110 1/16-1/2 by 32ndsRSP-29 29 pc set92100 1/16-1/2 by 64thsRSP-29P - Ultra Dex 29 pc set92150 1/16 thru 1/2 by 64ths


3/8" REDUCED SHANK

MECHANIC LENGTH DRILLSTTyyppee 225500--UUBB3-Flats on Shank - 135˚ Split Point• Special Hi-Molybdenum tool steel.• 135° split point for fast penetration and accurate starting without center punch.

• Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.

• Body and clearance are gold surface treated for maximum lubricity.

•Heat treated at 2185° F and then nitro-carburize finished at 950° F to be measurably harder than high-speed steel.

• Space age nitro-carburized steel withstands substantially higher drilling temperatures while maintaining sharpness.

• Specially designed for hand held drills.• Flats on shank give positive chuck-grip (3/16 and larger).• Recommended for use in work hardening grades of stainless steel and other hard metal drilling applications.

3-FLATS ON SHANK

Part DiameterNo. Inches22860 1/1622870 5/6422880 3/3286950 7/6486960 1/886970 9/6486980 5/3286990 11/6487000 3/1687010 13/6487020 7/3287030 15/6487040 1/487050 17/6487060 9/32

SETS TYPE 250 -UB

TTyyppee 225588--UUBB 3/8" Reduced Shank3-Flats on Shank - 135˚ Split Point

Part DiameterNo. Inches81560 13/3281570 27/6481580 7/1681590 29/6481600 15/3281610 31/6481620 1/2

SETS TYPE 258-UB 3/8" SHANKPart No. Description of SizesSPM-21R92340 1/16-1/4 by 64ths + 9/32-1/2 by 32ndsRSPM-1557910 1/16-1/2 by 32ndsRSPM-2957920 1/16-1/2 by 64thsRSPM-29P Ultra Dex57950 1/16-1/2 by 64ths

Part DiameterNo. Inches87070 19/6487080 5/1687090 21/6487100 11/3287110 23/6487120 3/887130 25/6487140 13/3287150 27/6487160 7/1687170 29/6487180 15/3287190 31/6487200 1/2

FRACTIONAL

Part LetterNo. Size23601 A23611 B23621 C23631 D23641 E23651 F23661 G23671 H23681 I23691 J23701 K23711 L23721 M

LETTER

SETS TYPE 260-UB

Part WireNo. Size87600 187590 287580 387570 487560 587550 687540 787530 887520 987510 1087500 1187490 1287480 1387470 1487460 1587450 1687440 1787430 1887420 1987410 2087400 2187390 2287380 23

WIRE

Part No. Description of SizesSPT-29 2299 ppcc sseett66490 1/16-1/2 by 64thsSPT-60 60 pc set23560 #1-60

SCREW MACHINE LENGTH DRILLSType 260-UB 135˚ Split PointSpecial Hi-Moybdenum tool steel. Gold surface treated body and clearance for maximum lubricity. Heavy-duty construction, 135° split point,no center punch needed - will not walk. Recommended for work hardening grades of stainless steel and other hard metal drilling applications.

Part Dia.No. Inches87930 13/3287940 27/6487950 7/1687960 29/6487970 15/3287980 31/6487990 1/288000 33/6488010 17/3288020 35/6488030 9/1688040 37/6488050 19/3288060 39/6488070 5/888080 41/6488090 21/3289210 43/6489220 11/1689230 45/6489240 23/3289250 47/6489260 3/4

Part WireNo. Size87370 2487360 2587350 2687340 2787330 2887320 2987310 3087300 3187290 3287280 3387270 3487260 3587250 3687240 3787230 3887220 3987210 4023360 4123370 4223380 43

Part WireNo. Size23390 4423400 4523410 4623420 4723430 4823440 4923450 5023460 5123470 5223480 5323490 5423500 5523510 5623520 5723530 5823540 5923550 60

Part LetterNo. Size23731 N23741 O23751 P23761 Q23771 R23781 S23791 T23801 U23811 V23821 W23831 X23841 Y23851 Z

33

Part No. Description of SizesSPM-13 1133 ppcc sseett66460 1/16-1/4 by 64thsSPM-15 1155 ppcc sseett66470 1/16-1/2 by 32ndsSPM-21 2211 ppcc sseett57810 1/16-3/8 by 64thsSPM-29 2299 ppcc sseett66480 1/16-1/2 by 64thsSPM-29P Ultra Dex 2299 ppcc sseett66820 1/16-1/2 by 64ths

Part Dia.No. Inches87710 1/1687720 5/6487730 3/3287740 7/6487750 1/887760 9/6487770 5/3287780 11/6487790 3/1687800 13/6487810 7/3287820 15/6487830 1/487840 17/6487850 9/3287860 19/6487870 5/1687880 21/6487890 11/3287900 23/6487910 3/887920 25/64


44

MECHANIC LENGTH HEX SHANK QUICK RELEASETTyyppee QQRR--UUBB 11//44”” HHeexx SShhaannkkQuick Release Drills -135̊ Split Point Ultra Bor Super Premium• Drill is a mechanic length with a quick release shank • Special Hi-Molybdenum tool steel.• 135̊ split point for fast penetration and accurate starting without center punch. • Body and clearance are treated for maximum lubricity.• Especially designed for hand held drills and impacters. • Recommended use in work hardening grades of stainless • Quick release eases changing of cutting tools. steel and other hard metal drill applications.

QUICK RELEASE SETS

QR-UB 1/4” HEX SHANK CARDED QR-UB 1/4” HEX SHANK

34801 Quick Release Adaptor 34807 Quick Release Adaptor

Part QtyNo. Description of Sizes of each3344880033 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 1

SET QQRR 77AA--UUBB SOFT POUCH - INDEX

Part QtyNo. Description of Sizes of each3344880044 1/8, ,3/16, 1/4, 5/16, 3/8, 7/16, 1/2 1

SET QQRR 77BB--UUBB SOFT POUCH - INDEX

Part Diameter Overall FluteNo. Inches Length Length

Inches Inches34501 1/16 2-5/8 7/834521 3/32 3-1/4 1-1/434541 1/8 3-1/2 1-7/1634561 5/32 3-1/2 1-11/1634581 3/16 3-3/4 1-7/834611 7/32 4'' 2''34631 1/4 4-1/4 2''34651 9/32 3-13/16 2-1/434671 5/16 4 2-1/234691 11/32 4-7/32 2-5/834711 3/8 4-1/4 2-11/1634731 13/32 4-1/2 2-13/1634751 7/16 4-1/2 2-15/1634771 15/32 4-7/8 3-1/834791 1/2 5 3-3/8

Part Diameter Overall FluteNo. Inches Length Length

Inches Inches34507 1/16 2-5/8 7/834527 3/32 3-1/4 1-1/434547 1/8 3-1/2 1-7/1634567 5/32 3-1/2 1-11/1634587 3/16 3-3/4 1-7/834617 7/32 4'' 2''34637 1/4 4-1/4 2''34657 9/32 3-13/16 2-1/434677 5/16 4 2-1/234697 11/32 4-7/32'' 2-5/8''34717 3/8 4-1/4 2-11/1634731 13/32 4-1/2'' 2-13/16''34757 7/16 4-1/2 2-15/1634771 15/32 4-7/8'' 3-1/8''34797 1/2 5 3-3/8

SET QR 12-UB HARD CASE - INDEXPart QtyNo. Description of Sizes of each3344881111 1/16, 3/32, 1/8, 5/32, 1

3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2& Quick Release Adaptor

Part QtyNo. Description of Sizes of each3344881122 1/16, 3/32, 1/8, 5/32, 1

3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/813/32, 7/16, 15/32, 1/2 & Quick Release Adaptor

SET QR 16 - UB SOFT POUCH - INDEX

Quick Release 1/4”” Hex Shank

Quick Release Adaptor

QR12-UB

QR16-UB

QR7B-UB

Sets QR 7A-UB and QR 7B-UB do not include Quick Release Adaptors.


55

METRIC - TYPE 643-UB

Part DiameterNo. MM49270 4.0049280 4.1049290 4.2049300 4.3049310 4.4049320 4.5049330 4.6049340 4.7049350 4.8049360 4.9049370 5.0049380 5.1049390 5.2049400 5.3049410 5.4049420 5.5049430 5.6049440 5.7049450 5.8049460 5.9049470 6.0049480 6.1049490 6.2049500 6.3049510 6.4049520 6.5049530 6.6049540 6.7049550 6.8049560 6.9049570 7.0049580 7.1049590 7.2049600 7.3049610 7.4049620 7.5049630 7.6049640 7.7049650 7.8049660 7.9049670 8.0049680 8.1049690 8.2049700 8.3049710 8.40

Part DiameterNo. MM49720 8.5049730 8.6049740 8.7049750 8.80 49760 8.9049770 9.0049780 9.1049790 9.2049800 9.3049810 9.4049820 9.5049830 9.6049840 9.7049850 9.8049860 9.9049870 10.0012450 10.1049880 10.2012510 10.3050220 10.4049890 10.5012460 10.6050230 10.7049900 10.8012470 10.9049910 11.0012480 11.1049920 11.2012490 11.4049930 11.5012500 11.6050250 11.7049940 11.8012520 11.9049950 12.0012530 12.1049960 12.2050260 12.3012540 12.4049970 12.5012550 12.6012570 12.7050270 12.8012560 12.9049980 13.00

METRIC DRILLS TTyyppee 664433--UUBBJobber Length - 135˚ Split PointSpecial Hi-Molybdenum tool steel with 135° split points for fast penetra-tion and accurate starting without a center punch. Precision ground point,flutes, body, clearance and drill diameter for the ultimate in accuracy andperformance. Body and clearance are gold surface treated for maximumlubricity. Drills are heat treated at 2185° F and then nitro-carburize finished at 950°F to be measurably harder than high speed-steel. Space age nitro-carbur-ized steel withstands substantially higher drilling temperatures while main-taining sharpness. Recommended for use in work hardening grades ofstainless steel and other hard metal drilling applications.

Part DiameterNo. MM48760 0.7048780 0.8048790 0.8548800 0.9049990 0.9548820 1.0048750 1.0548840 1.1048850 1.1523270 1.1848860 1.2048870 1.2548880 1.3048890 1.3548900 1.4048910 1.4548920 1.5048930 1.5548940 1.6048950 1.6548960 1.7048970 1.7548980 1.8049000 1.9049020 2.0049030 2.0549040 2.1049060 2.2049080 2.3049100 2.4049120 2.5049130 2.6049140 2.7049150 2.8049160 2.9049170 3.0049180 3.1049190 3.2049200 3.3049210 3.4049220 3.5049230 3.6049240 3.7049250 3.8049260 3.90

SETS 643-UB METRIC

Part No. Description of SizesSP-11M 1111 ppcc sseett58650 1.0mm-6.0mm x .5mm SP-13M 1133 ppcc sseett49042 1.0mm-7.0mm x .5mm SP-19M 1199 ppcc sseett58920 1.0mm-10.0mm x .5mm SP-25M 2255 ppcc sseett58660 1.0mm-13.0mm x .5mm SP-41M 4411 ppcc sseett49043 6.0mm-10.0mm x .1mm

EXTRA LENGTH DRILLSTTyyppee XXGGTT--UUBB6" - 9" - 12"

Special Hi-Molybdenum tool steel. Gold surface treated for maximumlubricity. Heavy-duty construction, 135° split point, no center punchneeded - will not walk. Gyroidal Torsion flute and land constructionyields exceptional performance in deep hole drilling applications. Recommended for work hardening grades of stainless steel and otherhard metal drilling applications. These drills will drill 12 or more diam-eters deep without drill removal to clear chips. Feed rates twice thatof standard drills.

FRACTIONAL - TYPE XGT-UB

Part No. Size x Length39240 1/8 x 639250 #29 x 639260 9/64 x 6 39270 5/32 x 639280 11/64 x 639300 3/16 x 639310 #10 x 639320 13/64 x 639330 7/32 x 639340 #1 x 639350 15/64 x 639360 1/4 x 639370 "F" x 639380 9/32 x 639390 5/16 x 639400 11/32 x 639410 3/8 x 639420 13/32 x 639430 7/16 x 639440 1/2 x 6

Part No. Size x Length40780 1/8 x 940890 9/64 x 940790 5/32 x 953140 11/64 x 940800 3/16 x 953160 13/64 x 940810 7/32 x 953180 15/64 x 940820 1/4 x 940830 9/32 x 940840 5/16 x 940850 11/32 x 940860 3/8 x 940870 7/16 x 940880 1/2 x 9

Part No. Size x Length43050 1/8 x 1253130 9/64 x 1243060 5/32 x 1253150 11/64 x 1243070 3/16 x 1253170 13/64 x 1243080 7/32 x 1253190 15/64 x 1243090 1/4 x 1243100 9/32 x 1243110 5/16 x 1243120 11/32 x 1243130 3/8 x 1243140 7/16 x 1243150 1/2 x 12


66

FRACTIONAL - TYPE 281-UB

Part No. Diameter Inches29741 13/1629781 7/829821 15/1629861 129901 1-1/829941 1-1/429961 1-3/829981 1-1/2

Part Dia.No. Inches29550 33/6429560 17/3229570 35/6429580 9/1629590 37/6429600 19/3229610 39/6429620 5/829630 41/6429640 21/3229650 43/6429660 11/1629670 45/6429680 23/3229690 47/6429700 3/429710 49/6429720 25/3229730 51/6429740 13/1629750 53/6429760 27/32


Part Dia.No. Inches29770 55/6429780 7/829790 57/6429800 29/3229810 59/6429820 15/1629830 61/6429840 31/3229850 63/6429860 1"29870 1-1/3229880 1-1/1629890 1-3/3229900 1-1/829910 1-5/3229920 1-3/1629930 1-7/3229940 1-1/429950 1-5/1629960 1-3/829970 1-7/1629980 1-1/2

REDUCED SHANK DRILLSSuper Premium

TTyyppee 228800--UUBB && 228800--UUBBMM ((MMEETTRRIICC))1/2" Shank Silver&Deming 135˚Split Point, 3-Flats on Shank,Heavy-Duty • Special Hi-Molybdenum tool steel.• 135° split point for fast penetration and accurate starting without a center punch. • Precision ground point, flutes, body, clearance and drill diameter for the

ultimate in accuracy and performance.• Body and clearance are gold surface treated for maximum lubricity.• Space age nitro-carburized steel withstands higher drilling temperatures while

maintaining sharpness.• Recommended for use in work hardening grades of stainless steel and other

hard metal drilling applications.• 6" Overall Length

TTyyppee 228811--UUBB3/4" Shank, Silver & Deming135˚Split PointThese are high performance, close tolerance, tight runoutspec tools designed fordrilling with Bridgeport styleor other production machineswith 3/4" chucks.

TTyyppee 228800--UUBBXX1/2" Shank Silver & DemingPremium - 3 -Flats on Shank 118˚ Split Point

• M-2 High Speed Steel • Precision ground point, flutes, body and clearance. • Standard 118˚ split point for general purpose drilling in metal, wood and plastic.

METRIC TYPE 280-UBM

Part No. Diameter Inches25500 14.025502 15.025504 16.025510 17.025512 18.025514 19.025520 20.025522 21.025524 22.025530 23.025532 24.025534 25.0

PPaarrtt NNoo.. DDeessccrriippttiioonn ooff SSiizzeessS & D-4SP 44 ppcc sseett12250 9/16, 5/8, 3/4 & 1S & D-8SP 88 ppcc sseett92400 9/16 - 1 " by 16thsS & D-33SP 3333 ppcc sseett92401 1/2 - 1 " by 64ths

135˚ Split Point

118˚ Split PointPart Dia.No. Inches74001 33/6474011 17/3274021 35/6474031 9/1674041 37/6474051 19/3274061 39/6474071 5/874081 41/6474091 21/3274101 43/6474111 11/1674121 45/6474131 23/32

Part Dia.No. Inches74141 47/6474151 3/474161 49/6474171 25/3274181 51/6474191 13/1674201 53/6474211 27/3274221 55/6474231 7/874241 57/6474251 29/32

Part Dia.No. Inches74261 59/6474271 15/1674281 61/6474291 31/3274301 63/6474311 1”74321 1-1/1674331 1-1/874341 1-5/3274351 1-3/1674361 1-1/4

FRACTIONAL - TYPE 280-UBX

SETS TYPE 280-UBX Part No. Description of SizesSS&&DD44 44 ppcc sseett7744777711 9/16, 5/8, 3/4, 1”S&D8 88 ppcc sseett7744778811 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”

SETS TYPE 280-UB 1/2" SHANK


77

LEFT-HAND SPIRAL - TYPE 240-AL

SETS TYPE 240-AL LEFT-HAND SPIRAL

CARDED TYPE 420-AL

Part No. Description of SizesLF-8 8 pc set87650 1/16-1/2 by 16ths LF-12 12 pc set87651 1/16-5/16 by 32nds, 3/8, 7/16 & 1/2LF-13 13 pc set87652 1/16-1/4 by 64thsLF-15 15 pc set87654 1/16-1/2 by 32ndsLF-17 17 pc set87853 1/16-1/4 by 64ths, 5/16 -1/2 by 16thsLF-29 29 pc set87854 1/16 thru 1/2 by 64thsLF-29P Ultra Dex 29 pc set87859 1/16 thru 1/2 by 64ths

ScrewPart Extractor DrillNo. Number Size

57100 EX-1 5/6457110 EX-2 7/6457120 EX-3 5/3257130 EX-4 1/457140 EX-5 17/6457150 EX-6 13/3257160 EX-7 17/3257170 EX-8 13/1657180 EX-9 1-1/8

TYPE 420-UB CARDED TYPE 420-UB

TTyyppee 442200--UUBBScrew & Pipe Extractors - Hi-Carbon Steel - Spiral StyleRemove broken screws, bolts, threaded parts and pipe. To remove the broken threaded part, drill a hole inthe broken part, insert extractor and turn to the left. Broken piece is extracted without damage to threads.

SETS TYPE 420-UB SCREW & PIPE EXTRACTORSPart No. Description of SizesBR-10 - Type 420-UB & 240-AL 10 pc set wwiitthh DDrriillllss58510 E 1, 2, 3, 4 & 5 + 3/32, 1/8,

3/16, 1/4 & 5/16SE-4N - Type 420-UB 4 pc set47170 E 2, 3, 4 & 5SE-5N - Type 420 -UB 5 pc set47180 E 1, 2, 3, 4 & 5BR-8 - Type 420-UB & 240-AL 8 pc set wwiitthh DDrriillllss88550 E 1, 2, 3 & 4 + 3/32, 1/8, 3/16 & 1/4




Part DiameterNo. Inches92481 25/6492482 13/3292483 27/6492490 7/1692491 29/6492492 15/3292493 31/6492500 1/2

ScrewScrewPartPart ExtractorExtractor DrillDrillNo.No. NumberNumber SizeSize7076070760 E-1E-1 1/81/87077070770 E-2E-2 3/163/167078070780 E-3E-3 1/41/47080070800 E-4E-4 5/165/167081070810 E-5E-5 3/83/8

STUDOUT ™ SQUARE STYLEScrew

Part Extractor DrillNo. Number Size70820 E-6 1/270830 E-7 9/1670860 E-8 5/870870 E-9 11/16

SETS TYPE 421 -UB -BOLT EXTRACTOR Part No. Description of SizesSQE-4 - Type 421-UB 4 pc set7700884400 E 2, 3, 4 & 5BR-8SQ - Type 421-UB & 240-AL 8 pc set wwiitthh DDrriillllss7700885500 E 1, 2, 3 & 4 + 1/8, 3/16,

1/4 & 5/16

BROKEN BOLT REMOVERCOMBO - CARDEDTTyyppee 442200--AALLLeft hand drill combined with spiralstyle screw extractor is ideal for removing broken studs.

Part Extractor Drill No. Sizes Size30137 EX-1 3/32 LH drill30147 EX-2 1/8 LH drill30157 EX-3 3/16 LH drill30167 EX-4 1/4 LH drill30177 EX-5 5/16 LH drill

LEFT-HAND SPIRAL DRILLSTTyyppee 224400--AALL•Special Hi-Molybdenum tool steel.•135° split point for fast penetration and accurate starting without center punch.•Body and clearance are gold surface treated for maximum lubricity.•Ideal for drilling broken studs.•Need for screw or bolt extractor may be eliminated.•Left hand spiral drill may loosen the bolt stud while drilling a hole for use of the screw or bolt extractor.

BBRR--1100

ScrewPart Extractor DrillNo. Number Size

57107 EX-1 5/6457117 EX-2 7/6457127 EX-3 5/3257137 EX-4 1/457147 EX-5 17/64

EXTRACTORS & SETSTTyyppee 442211--UUBBStudout™ Square Style, Forged Hi-Carbon SteelThe square shape of these extractors gives the tools the ability to remove bro-ken bolts, screws and pipes with minimum deformation of the broken part. To remove the broken threaded part: Drill a hole in the end of the broken part (left-hand spiral heavy-duty drills arerecommended for this drilling operation), insert extractor and turn counter-clockwise using a wrench on the exposed end of the extractor. The brokenpart should unscrew without damage to the threads. These extractors will notchew up or expand the object being removed.


88

SETS SIZES

Part Hole No. of Shank Step StepNo. Size Sizes Range Size Increments Thickness0011440011 1/8-1/2 13 1/8 - 1/2 1/4 1/32 1/80011440022 3/16A 6 3/16 - 1/2 1/4 1/16 3/80011440033 3/16B 12 3/16 - 7/8 1/4 1/16 1/80011440044 1/4 -3/4 9 1/4 - 3/4 1/4 1/16 5/320011440099 7/8A 2 7/8 - 1-1/8 1/4 27/64 9/640011441122 1/4 - 7/8 11 1/4 - 7/8 1/4 1/16 1/160011441133 1/4A 16 1/4 - 1-1/8 1/4 1/16 1/16

0011444411 1/8 - 1/2, 3/16 - 1/2, & 3/16 - 7/80011445511 1/8 - 1/2, 3/16 - 1/2, & 1/4 - 3/40011446611 1/8-1/2, 3/16-7/8, 7/8- 1- 1/8

TYPE 78-QR QUICK RELEASE - HEX SHANK STEP DRILLS

STEP DRILLSTTyyppee 7788--UUBB 3 -Flatted ShankTTyyppee 7788--QQRR Quick Release, TTyyppee 7788--UUBBNN TiN CoatedUltra Bit ™ Multi -Diameter 3 -Flats on ShankSpecial Axial and Radial flute design speed work piece penetration. The 135˚split point self centers and easily startswith no pilot hole required. Dual flute construction drillsclean accurate holes in thin materials, quickly and easily.Use for all thin metals, rigid plastics, wood or compositematerials with a thickness equal to or less than the step thick-ness. When drilling steel with 1/8" or greater thickness, astarter hole of the smallest step diameter will speed thedrilling process.

TYPE 78-UBN STEP DRILLS

SETS SIZES

Hole No. Shank Step StepPart# Size Sizes Range Size Increments Thickness6699113300 1/8 - 1/2 13 1/8 - 1/2 1/4 1/32 1/86699114400 3/16 A 6 3/16 - 1/2 1/4 1/16 3/86699115500 3/16 B 12 3/16 - 7/8 3/8 1/16 1/86699116600 1/4 - 3/4 9 1/4 - 3/4 3/8 1/16 5/326699118800 9/16 - 1 8 9/16 - 1" 3/8 1/16 5/326699119900 13/16 10 13/16 - 1 - 3/8 1/2 1/32 5/326699222200 1/4 K0 10 1/4 - 1 - 3/8 3/8 1/8 *SSEEEE NNOOTTEE6699220000 7/8 A 2 7/8- 1 - 1/8 3/8 27/64 9/646699117700 1/4 - 7/8 11 1/4 - 7/8 3/8 1/16 1/166699221100 1/4 A 16 1/4 - 1-1/8 3/8 1/16 1/16NNOOTTEE:: PPaarrtt NNoo.. 6699222200 33//1166 sstteeppss aatt 77//88,, 11--11//88 && --33//88 ffoorr ccoonndduuiitt kknnoocckk--oouuttss..

6699223300 1/8 - 1/2, 3/16 - 1/2, & 3/16 - 7/86699224400 1/8 - 1/2, 3/16 - 1/2, & 9/16 - 16699225500 1/8 - 1/2, 3/16 - 1/2, & 1/4 - 3/4

ULTRA LUBE™ - TYPE 11-UB

Self selling display with an attractive attention getting decal applied tothe inside of the display flap. Dispose of display when empty.

Part No. Size MM Bottles Per Case96050 12 - 4 OZ. 1296060 48 - 4 OZ. 4896070 12 - 16 OZ. 129966007711 88 ppccss DDiissppllaayy 8 - 4 OZ.

CUTTING TOOL LUBRICANTTTyyppee 1111--UUBBUltra Lube™ High PerformanceHHiigghh VViissccoossiittyy.. Super concentrated no run formula. Clings to vertical surfaces for contin-ual lubrication. This fluid will extend tool lifeand yield a super smooth machined finish.

Part No. Diameter Inches95090 3/3295080 7/6495980 1/895070 9/6495060 5/3295050 3/1695040 7/3295030 1/4

FRACTIONAL - TYPE 490-G

DiameterPart No. Wire Gauge95020 1095010 1195000 2094990 30

WIRE - TYPE 490-G

TWIN END DRILLS TTyyppee 449900--GG135̊ Split PointSpecial Hi-Molybdenum tool steel, gold surface treatedfor maximum lubricity. 135° split point for fast penetra-tion and accurate starting without a center punch. Extrarugged uncleared construction gives superior perform-ance and less breakage.

TYPE 78-UB STEP DRILLS

SETS SIZES

Part Hole No. of Shank Step StepNo. Size Sizes Range Size Increments Thickness0000770000 1/8-1/2 13 1/8-1/2 1/4 1/32 1/80000770011 3/16A 6 3/16-1/2 1/4 1/16 3/80000770022 3/16B 12 3/16-7/8 3/8 1/16 1/80000770033 1/4-3/4 9 1/4-3/4 3/8 1/16 5/320000770044 9/16-1 8 9/16-1" 3/8 1/16 5/320000771100 13/16 10 13/16-1-3/8 3/8 1/32 5/320000771111 1/4 K0 10 1/4-1-3/8 3/8 1/8 *SSEEEE NNOOTTEE0000771133 7/8 A 2 7/8 - 1-1/8 3/8 27/64 9/640000771144 1/4 - 7/8 11 1/4 -7/8 3/8 1/16 1/160000771199 1/4 A 16 1/4 - 1-1/8 3/8 1/16 1/16

NNOOTTEE:: PPaarrtt NNoo.. 0000771111 33//1166 sstteeppss aatt 77//88,, 11--11//88 && -- 33//88 ffoorr ccoonndduuiitt kknnoocckk--oouuttss..

0000772211 1/8 - 1/2, 3/16 - 1/2, & 3/16 - 7/80000773311 1/8 - 1/2, 3/16 - 1/2, & 9/16 - 10000774411 1/8 - 1/2, 3/16 - 1/2, & 1/4 - 3/4

Quick Release 1/4" Hex Shank


99

Part Diameter Flute Overall Taper No. Inches Length Length Shank

83310 7/16 4-3/8 8-1/4 #283320 1/2 5-1/8 9 #283330 9/16 5-1/8 9 #283340 5/8 6-1/8 10 #283350 11/16 7-1/8 11-3/4 #383360 3/4 7-3/8 12 #383370 13/16 7-3/8 12 #383380 7/8 7-3/8 12 #383390 15/16 7-3/8 12 #383400 1 7-3/8 12 #383410 1-1/16 7-3/8 12 #383420 1-1/8 7-3/8 12 #383430 1-3/16 7-3/8 12 #383440 1-1/4 7-3/8 13 #483450 1-5/16 7-3/8 13 #4

TYPE 55-UB SPIRAL FLUTEPart Diameter Flute Overall Taper No. Inches Length Length Shank

81630 7/16 4-3/8 8-1/4 #281640 1/2 5-1/8 9 #281650 9/16 5-1/8 9 #281660 5/8 6-1/8 10 #281670 11/16 7-1/8 11-3/4 #381680 3/4 7-3/8 12 #381690 13/16 7-3/8 12 #381700 7/8 7-3/8 12 #381710 15/16 7-3/8 12 #381720 1 7-3/8 12 #381730 1-1/16 7-3/8 12 #381740 1-1/8 7-3/8 12 #381750 1-3/16 7-3/8 12 #381760 1-1/4 7-3/8 13 #481770 1-5/16 7-3/8 13 #4

TYPE 54-UB STRAIGHT FLUTE

Part No. Diameter Inches Point Diameter Min. Starting Hole Size06381 5/16 0.215 17/6406391 3/8 0.250 5/1606501 7/16 0.250 3/806401 1/2 0.281 3/8 06411 9/16 0.343 7/1606421 5/8 0.343 7/1606432 0.652 0.375 15/3206431 11/16 0.375 15/3206441 3/4 0.406 1/2 06531 0.776 0.406 1/206451 13/16 0.468 35/6406461 7/8 0.500 19/3206471 15/16 0.585 5/8 06481 1" 0.594 7/8 06491 1-1/16" 0.807 7/8 06482 1-1/4 0.719 1"SET CR-4FS12271 3/8, 1/2, 5/8 & 3/4

SET SM-4FS12281 5/16, 3/8, 7/16 & 1/2

TYPE 50-UB STANDARD FLUTE TYPE 51 -UB FAST SPIRAL

CAR REAMERS - STANDARD FLUTETTyyppee 5500--UUBB

Car Reamers - Standard Flute, 3 -Flats on ShankSpecial Hi-Tungsten tool steel, gold surface treated body and clearance formaximum lubricity. These reamers are especially designed for the reamingof structural steel plate commonly found in truck frames, rail cars, bridgesand pressure vessels. For use only to enlarge previously formed or drilled holes. All tools are con-structed with left-hand spiral and right-hand cut. The left-hand spiral elimi-nates the tendency of the reamer to pull itself into holes.

Part Diameter Point Min. StartingNo. Inches Diameter Hole Size06390 3/8 0.250 5/1606400 1/2 0.281 3/8 06410 9/16 0.343 7/1606420 5/8 0.343 7/1606430 11/16 0.375 15/3206440 3/4 0.406 1/2 06450 13/16 0.468 35/6406460 7/8 0.500 19/3206470 15/16 0.585 5/8 06480 1" 0.594 7/8 06484 1-1/4 0.719 1"SET CR-4SP12270 3/8, 1/2, 5/8 & 3/4

CAR REAMERS - FAST SPIRALTTyyppee 5511--UUBB

Car Reamers -Fast Spiral, Hole Buster™ 3-Flats on ShankSpecial Hi-Tungsten tool steel, gold surface treated body and clear-ance for maximum lubricity. These reamers are especially designed forthe reaming of structural steel plates commonly found in truck frames,rail cars, bridges, and pressure vessels. For use only to enlarge previ-ously formed or drilled holes. All tools are constructed with left-handspiral and right-hand cut. The left-hand spiral eliminates the tendency of the reamer to pull itselfinto holes.The 51-UB, with the fast spiral, is the more aggressive of thetwo styles. It also will fit the needs of users who prefer a stop collar.

BRIDGE REAMERS - STRAIGHT FLUTE BRIDGE REAMERS - SPIRAL FLUTETTyyppee 5544--UUBB TTyyppee 5555--UUBB

Bridge Reamers - Straight & Spiral Flutes - Taper Shank High-Speed Steel, Surface TreatedThese special Hi-Tungsten tool steel reamers with gold surface treated body and clearance are designed to be used with Morse Taper shankequipment. They are available in both straight and spiral flute configuration and are designed for heavy-duty reaming as encountered in thefabrication of structural steel assemblies, bridge erection, and ship construction. The tapered design permits the reamer to enter out-of-line holesoften encountered in structural work.

(See page 18 for Reamer Stocked Counter Displays.)


1100

HEX DRIVE REAMERSTTyyppee 5522--UUBB TTyyppee 5533--UUBBHex Drive Reamers - Black & Gold Finish, High Speed Steel- Spiral FluteDesigned for aligning and enlarging holes in structural steel applications.For use in rotary impact sockets. Shank diameter matches socket size forbolt which will be driven through reamed hole. Gold treated for maxi-mum lubricity.

Overall FlutePart Diameter Length LengthNo. Inches Inches Inches32260 3/32 2-1/4 1- 5/1631500 1/8 2-5/8 1-11/1631510 5/32 3 2-1/1631520 3/16 3-3/8 2- 3/832220 7/32 3-3/4 2- 9/1631530 1/4 3-15/16 2-13/1632240 9/32 3-9/16 231540 5/16 3-13/16 2-3/1632290 11/32 4-1/32 2-3/831550 3/8 4-1/2 2 -9/1632460 13/32 4-1/32 2-3/431560 7/16 4-11/16 2-15/1632470 15/32 4-7/8 3-1/831570 1/2 5 3-1/4


FRACTIONAL - TYPE 284-UBPart Diameter Minimum StartingNo. Inches Hole Size22030 3/8 1/422040 1/2 5/1622060 9/16 3/822080 5/8 25/6422100 11/16 7/1622120 3/4 15/32

SP-8HH Set contains: 1 each: 228844--UUBB core drill sizes 3/8, 1/2, 5/8 & 3/4.

225500--UUBB drill sizes 1/4, 5/16, 25/64 & 15/32

Part No. 38880

SP-6HHS Set contains: 1 each:228844--UUBB core drill sizes: 3/8, 1/2 & 5/8.

225500 --UUBB drill sizes 1/4, 5/16 & 25/64

Part No. 38860

SP-6HHL Set contains: 1 each:228844 --UUBB core drill sizes 1/2, 5/8 & 3/4.

225500 --UUBB drill sizes5/16, 25/64 & 15/32.

Part No. 38870

SETS TYPE 284-UB HOLE HOG

11//22"" SShhaannkk ((33--ffllaattss oonn sshhaannkk)) 44--FFlluuttee CCoorree DDrriillll -- SSuuppeerr PPrreemmiiuummA selection of core drills and companion (minimum starting hole size) pilot drills in a black steel index.


BRAD POINT DRILLS TTyyppee 1166--UUBBJobber Length - Burrout™ These high performance drills made from Hi-Moly tool steel will cut holesin sheet metal, wood or plastics and leave no burr. They will also drill splin-ter free holes in wood. The special BURROUT™ point cuts at the circumfer-ence of the hole to avoid the break through burr problems common withstandard point drills.

FRACTIONAL - TYPE 16-UBPart DiameterNo. Inches01111 3/1601131 7/3201151 1/401191 5/1601231 3/801271 7/1601311 1/2

ACRYLIC DRILLSTTyyppee 118833--UUBBAcrylic Drills with Chipfree™ PointSuper CHIPFREE™ point is precision ground at a 60° angle for grad-ual penetration to avoid cracking and chipping of the acrylic materi-al. Special 0° rake angle on cutting edge eliminates "grabbing"when drill breaks through plastic, acrylic or laminate surfaces. All sizes over 1/4" have 1/4" shanks.

SETS TYPE 16-UB

Part No. Description of SizesBF-10 10 pc set42001 5/64-3/16 by 64ths + 7/32, 1/4 BF-14 14 pc set42031 5/64-3/16 by 64ths + 7/32, 1/4-1/2 by 16ths

HOLE HOG™TTyyppee 228844--UUBBHole Hog™ 4 -Flute, 3-Flats on ShankSpecial Hi - Molybdenum tool steel, gold surface treated body and clearance for maximum lubricity. This tool is designed for enlarging existing holes exclusively. The 4 - flute design eliminates the catching and hogging-in experienced with standard S & D drills when breaking through thinner materials such as truck frames.These core drills may replace tapered reamers in many applications.

SETS TYPE 183-UBPart No. Description of SizesAD-7 7 pc set31580 1/8, 3/16,1/4, 5/16

3/8, 7/16, 1/2

TYPE 52-UB BRIDGE LENGTH TYPE 53-UB CAR LENGTH

Part Diameter Hex ShankNo. Inches Inches35580 9/16 1-1/1635590 5/8 1-1/1635610 11/16 1-1/1635620 3/4 1-1/435630 13/16 1-1/435640 7/8 1-7/1635650 15/16 1-7/1635660 1 1-7/1635670 1-1/16 1-5/835600 1-1/8 1-5/835680 1-3/16 1-13/1635690 1-5/16 2

Part Diameter Hex ShankNo. Inches Inches20480 9/16 1-1/1620490 5/8 1-1/1620510 11/16 1-1/1620520 3/4 1-1/420530 13/16 1-1/420540 7/8 1-7/1620550 15/16 1-7/1620560 1 1-7/1620570 1-1/16 1-5/820500 1-1/8 1-5/820580 1-3/16 1-13/1620590 1-5/16 2


1111

SETS TYPE 82-UB & 90-UB

Part No. Description of SizesSP-4CS10440 82-UB C/S sizes:

CS5S, CS6S, CS5S, CS10SSP-4ACS10442 82-UB C/S sizes:

CS6S, CS8S, CS10S, CS3/16SSP-6DB10450 90-UB D/B sizes:

DB1/16, DB1/8, DB5/32,DB3/16, DB5/16 & DB9/16

SP-9CS10443 82-UB C/S sizes:

CS5S, CS6S, CS8S, CS10S, CS1/4,CS5/16, CS3/8, CS7/16 & CS1/2

CHATTERPROOF COUNTERSINK & DEBURRING TOOLSTTyyppee 8822 --UUBB ((PPiillootteedd,, PPiilloottlleessss)) TTyyppee 9900--UUBB ((DDeebbuurrrriinngg))Special Hi-Molybdenum tool steel, gold surface treated points for maximum lubricity and chatterproof finish.

These high performance, flute-less tools are:• Free cutting - for ease of use • Easily resharpened - for extra long life• Single cutting edge - for fast stock removal • Wide selection of styles & angles - a tool for any job• Chatterproof - for a micro smooth finish

• Recommended for superior finishes on metal, plastic and wood applications..

Type 82-UB 82˚ Piloted Countersinks

Type 82-UB 82˚ Pilotless Countersinks

Type 90-UB 82˚ 90˚ Deburring Tools

See right for technical diagram.

Type 90-UB (Deburring)Type 82-UB (Piloted)

Type 82-UB (Pilotless)

Shank OverallPart Screw Diameter Length # per/No. Size Style Size A B C D E F pack67010 CS1/4 1 1/4 1/4 3/8 2 33/64 1 5/32 167020 CS1/4A 1 1/4 17/64 3/8 2 33/64 1 5/32 167030 CS5/16 1 5/16 5/16 3/8 2-3/16 41/64 1-3/16 5/32 167040 CS5/16A 1 5/16 21/64 3/8 2-3/16 41/64 1-3/16 5/32 167050 CS3/8 1 3/8 3/8 1/2 2-5/8 49/64 1-3/8 5/32 167060 CS3/8A 1 3/8 25/64 1/2 2-5/8 49/64 1-3/8 5/32 167070 CS7/16 1 7/16 7/16 1/2 2-3/4 53/64 1-1/2 7/32 167080 CS7/16A 1 7/16 29/64 1/2 2-3/4 53/64 1-1/2 7/32 167090 CS1/2 1 1/2 1/2 1/2 2-13/16 15/16 1-9/16 1/4 167100 CS1/2A 1 1/2 33/64 1/2 2-13/16 15/16 1-9/16 1/4 1

Style 1- Piloted

Style 2 - Pilotless

Style 3 - Deburring

Shank OverallPart Diameter of Cut Screw Diameter Length # per/No. Size Style Min Max Size B C D E pack67110 CS073 3 0.073 15/64 --- 1/4 1-3/4 --- --- 167120 CS3/16 2 3/16 17/32 --- 1/4 1-7/8 9/16 1 167130 CS307 2 0.307 25/32 --- 1/2 2-5/8 13/16 1-3/8 167140 CS307A 2 0.307 25/32 --- 1/4 2-1/16 13/16 1-1/4 167150 CS431 2 0.431 7/8 --- 1/2 2-13/16 1-1/8 1-9/16 167160 CS1/2B 2 1/2 1-15/32 --- 1/2 3-1/2 1-1/2 2-1/8 167170 CS5S 2 --- --- No. 4, 51/4 1-1/2 17/64 5/8 167180 CS6S 2 --- --- No..6 1/4 1-1/2 19/64 5/8 167190 CS8S 2 --- --- No. 8 1/4 1-5/8 11/32 3/4 167200 CS10S 2 --- --- No.10 1/4 1-5/8 25/64 3/4 1


Shank OverallPart Diameter of Cut Diameter Length # per/No. Size Style Min Max B C D E pack67210 DB1/64 3 1/64 11/64 3/16 1-1/2 --- --- 167220 DB1/16 3 1/16 11/64 3/16 1-1/2 --- --- 167230 DB1/8 3 1/8 15/64 1/4 1-3/4 --- --- 167240 DB5/32 2 5/32 13/32 1/4 1-11/16 7/16 13/16 167250 DB3/16 2 3/16 17/32 1/4 1-7/8 9/16 1 167260 DB5/16 2 5/16 25/32 1/2 2-19/32 13/16 1-3/8 167270 DB5/16C 2 5/16 25/32 1/4 2-1/32 13/16 1-5/32 167280 DB9/16 2 9/16 1-3/32 1/2 2-13/16 1-1/8 1-9/16 167290 DB1/2 2 1/2 1-15/32 1/2 3-1/2 1-1/2 2-1/8 1


™


1122

TAPS - STRAIGHT FLUTETTyyppee 2244--UUBBStraight Flute - Plug StyleSpecial Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treat-ed for maximum lubricity. For general use in production tapping orhand operations. Precision ground threads for the ultimate in accuracyand performance. Taper, plug and bottoming styles provide great versatility in tough mate-rials in both blind and through holes. These high performance taps areavailable in complete sets of one taper, plug and bottoming tap of thesame size.

PartNo. Size60661 2-5660681 3-4860701 4-4060731 5-4060751 6-3260761 6-4060771 8-3260781 8-3660791 10-2460801 10-3260811 12-2460821 12-2860831 1/4-2060841 1/4-2

Plug StyleGenerally used in thru holes orin blind holes with sufficient

clearance.

TYPE 24 -UB STRAIGHT FLUTE PLUG STYLEPartNo. Size60851 5/16-1860861 5/16-2460871 3/8-1660881 3/8-2460891 7/16-1460901 7/16-2060911 1/2-1360921 1/2-2060951 9/16-1260961 9/16-1860971 5/8-1160981 5/8-1860991 3/4-1061401 3/4-16

PartNo. Size61411 7/8-961421 7/8-1461431 1"-861441 1"-1227571 1"-1461451 1 1/8-761461 1 1/8-1261471 1 1/4-761481 1 1/4-1261491 1 3/8-661501 1 3/8-1261511 1 1/2-661521 1 1/2-12

PartNo. Size60100 0-8060110 1-6460120 1-7260130 2-5660140 2-6460150 3-4860160 3-5660170 4-4060180 4-4860190 4-3660200 5-4060210 5-4460220 6-3260230 6-4060240 8-3260250 8-3660260 10-24

PartNo. Size60270 10-3260280 12-2460290 12-2860320 1/4-2060330 1/4-2860340 5/16-1860350 5/16-2460360 3/8-1660370 3/8-2460380 7/16-1460390 7/16-2060400 1/2-1360410 1/2-2060420 5/8-1160430 5/8-1860440 3/4-1060450 3/4-16

TAPS - SPIRAL POINTTTyyppee 2200--UUBB && 2211--UUBBSpiral Point - Plug StyleSpecial Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treat-ed for maximum lubricity. Spiral point construction drives chips aheadof the tap, permitting higher speeds and faster cutting with less torque.

Precision ground threads for the ultimate in accuracy and performance.Recommended for stainless and other hard metals. Plug style spiralpointed taps are ideal for production tapping of through holes.

TYPE 20 -UB SPIRAL PLUG STYLE

Part Size &No. Pitch60500 2.5-0.4560510 3.0-0.5060520 3.5-0.6060530 4.0-0.7060550 5.0-0.8060560 6.0-1.0060580 8.0-1.2560600 10.0-1.5060620 12.0-1.7560630 14.0-2.0060640 16.0-2.0060650 18.0-2.50

METRIC TYPE 21 -UB

PartNo. Size60660 2-5660680 3-4860700 4-4060730 5-4060750 6-3260760 6-4060770 8-3260780 8-3660790 10-2460800 10-3260810 12-2460820 12-2860830 1/4-2060840 1/4-2860850 5/16-18

PartNo. Size60860 5/16-2460870 3/8-1660880 3/8-2460890 7/16-1460900 7/16-2060910 1/2-1360920 1/2-2060950 9/16-1260960 9/16-1860970 5/8-1160980 5/8-1860990 3/4-1061400 3/4-1661410 7/8-961420 7/8-14

PartNo. Size61430 1"-861440 1"-1227570 1"-1461450 1 1/8-761460 1 1/8-1261470 1 1/4-761480 1 1/4-1261490 1 3/8-661500 1 3/8-1261510 1 1/2-661520 1 1/2-12

PartNo. Size60662 2-5660682 3-4860702 4-4060732 5-4060752 6-3260762 6-4060772 8-3260782 8-3660792 10-2460802 10-3260812 12-2460822 12-2860832 1/4-2060842 1/4-2860852 5/16-1860862 5/16-24

PartNo. Size60872 3/8-1660882 3/8-2460892 7/16-1460902 7/16-2060912 1/2-1360922 1/2-2060952 9/16-1260962 9/16-160972 5/8-1160982 5/8-1860992 3/4-1061402 3/4-1661412 7/8-9

PartNo. Size61422 7/8-1461432 1"-861442 1"-1227572 1"-1461452 1 1/8-761462 1 1/8-1261472 1 1/4-761482 1 1/4-1261492 1 3/8-661502 1 3/8-1261512 1 1/2-661522 1 1/2-12

Taper StyleStarts the thread square

with workpiece.

TAPS - STRAIGHT FLUTETTyyppee 2233--UUBB,, 2255--UUBBStraight Flute - Taper & Bottoming StyleSpecial Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or handoperations. Precision ground threads for the ultimate in accuracy and performance. Taper, plug and bottoming styles provide great versatilityin tough materials, both blind and through holes. These high performance taps are available in complete sets of one taper, plug and bottom-ing tap of the same size.

TYPE 23 -UB STRAIGHT FLUTE - TAPER TYPE 25 -UB STRAIGHT FLUTE - BOTTOMING

TTuurrnn ttoo PPaaggee 1133 TTaappss -- SSttrraaiigghhtt FFlluuttee SSeettss

Bottoming StyleGenerates the thread to the bottom of blind holes.


1133

PartNo. Size60223 6-3260243 8-3260263 10-2460273 10-3260323 1/4-2060333 1/4-2860343 5/16-1860353 5/16-2460363 3/8-1660373 3/8-2460383 7/16-1460393 7/16-2060403 1/2-1360413 1/2-2060423 9/16-1260433 9/16-1860443 5/8-1160453 5/8-18

PartNo. Size60222 6-3260242 8-3260262 10-2460272 10-3260322 1/4-2060332 1/4-2860342 5/16-1860352 5/16-2460362 3/8-1660372 3/8-2460382 7/16-1460392 7/16-2060402 1/2-1360412 1/2-2060422 9/16-1260432 9/16-1860442 5/8-11

PartNo. Size60224 6-3260244 8-3260264 10-2460274 10-3260324 1/4-2060334 1/4-2860344 5/16-1860354 5/16-2460364 3/8-1660374 3/8-2460384 7/16-1460394 7/16-2060404 1/2-1360414 1/2-2060424 9/16-1260434 9/16-1860444 5/8-11

TAPS - LEFT HAND STRAIGHT FLUTETTyyppee 2233LL--UUBB,, 2244LL--UUBB && 2255LL--UUBBStraight Flute Left-Hand Thread - Taper, Plug & Bottoming Style TYPE 23L-UB STRAIGHT FLUTE LEFT-HAND TAPER TYPE 24L-UB STRAIGHT FLUTE LEFT-HAND PLUG TYPE 25L-UB STRAIGHT FLUTE LEFT-HAND BOTTOMING

PartNo. Size60463 11/16-1160473 11/16-1660483 3/4-1060493 3/4-1660503 7/8-960513 7/8-1460523 1-860533 1-1260543 1-1460553 1-1/8-760563 1-1/8-1260573 1-1/4-760583 1-1/4-1260593 1-3/8-660603 1-3/8-1260609 1-1/2-1260613 1-1/2-6

PartNo. Size60452 5/8-1860462 11/16-1160472 11/16-1660482 3/4-1060492 3/4-1660502 7/8-960512 7/8-1460522 1-860532 1-1260542 1-1460552 1-1/8-760562 1-1/8-1260572 1-1/4-760582 1-1/4-1260592 1-3/8-660602 1-3/8-1260612 1-1/2-660619 1-1/2-12

PartNo. Size60454 5/8-1860464 11/16-1160474 11/16-1660484 3/4-1060494 3/4-1660504 7/8-960514 7/8-1460524 1-860534 1-1260544 1-1460554 1-1/8-760564 1-1/8-1260574 1-1/4-760584 1-1/4-1260594 1-3/8-660599 1-3/8-1260604 1-1/2-1260614 1-1/2-6

SETS TYPE 26 -UB TAPER, PLUG, BOTTOMING PartNo. Size60663 2-5660683 3-4860703 4-4060733 5-4060753 6-3260763 6-4060773 8-3260783 8-3660793 10-2460803 10-3260813 12-2460823 12-2860833 1/4-2060843 1/4-2860853 5/16-1860863 5/16-24

PartNo. Size60873 3/8-1660883 3/8-2460893 7/16-1460903 7/16-2060913 1/2-1360923 1/2-2060953 9/16-1260963 9/16-1860973 5/8-1160983 5/8-1860993 3/4-1061403 3/4-1661413 7/8-961423 7/8-1461433 1"-861443 1"-12

PartNo. Size27573 1"-1461453 1 1/8-761463 1 1/8-1261473 1 1/4-761483 1 1/4-1261493 1 3/8-661503 1 3/8-1261513 1 1/2-661523 1 1/2-12

TAPS - STRAIGHT FLUTETTyyppee 2266--UUBB -- SSeettssStraight Flute -Includes one each Taper, Plug & Bottoming Style

Includes one of each size:Types 23-UB (Taper), 24-UB (Plug) and 25-UB (Bottoming) taps.

Taper StyleStarts the thread square with workpiece.

BottomingGenerates the thread to the bottom of

blind holes.

Plug StyleGenerally used in thru holes or in blind

holes with sufficient clearance.


1144

SizePart No. MM60379 2.5-.4560389 3.0-.5060519 3.5-.6060529 4.0-.7060369 4.5-.7560539 5.0-.8060549 6.0-1.0060559 7.0-1.0060569 8.0-1.0060579 8.0-.1.2560589 10.0-1.2560611 10.0-1.5061601 12.0-1.2561602 12.0-1.7561603 14.0-1.5061604 14.0-2.0061609 16.0-1.5061611 16.0-2.0061612 18.0-2.5061613 20.0-2.5061614 24.0-3.0061619 27.0-3.0061621 30.0-3.5061622 33.0-3.5061623 36.0-4.0061624 39.0-4.00

Part SizeNo. MM61629 2.5-.4561631 3.0-.5061632 3.5-.6061633 4.0-.7061634 4.5-.7561639 5.0-.8061641 6.0-1.0061642 7.0-1.0061643 8.0-1.0061644 8.0-.1.2561649 10.0-1.2561651 10.0-1.5061652 12.0-1.2561653 12.0-1.7561654 14.0-1.5061659 14.0-2.0061661 16.0-1.5061662 16.0-2.0061663 18.0-2.5061664 20.0-2.5061669 24.0-3.0061671 27.0-3.0061672 30.0-3.5061673 33.0-3.5061674 36.0-4.0061679 39.0-4.00

Part SizeNo. MM61681 2.5-.4561682 3.0-.5061683 3.5-.6061684 4.0-.7061689 4.5-.7561691 5.0-.8061692 6.0-1.0061693 7.0-1.0061694 8.0-1.0061699 8.0-.1.2561701 10.0-1.2561702 10.0-1.5061703 12.0-1.2561704 12.0-1.7561709 14.0-1.5061711 14.0-2.0061712 16.0-1.5061713 16.0-2.0061714 18.0-2.5061719 20.0-2.5061721 24.0-3.0061722 27.0-3.0061723 30.0-3.5061724 33.0-3.5061729 36.0-4.0061731 39.0-4.00

TAPS - METRICTTyyppee 3311--UUBB,, 3322--UUBB && 3333--UUBBMMEETTRRIICC - Straight Flute - Taper, Plug & Bottoming StyleSpecial Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping orhand operations. Precision ground threads for the ultimate in accuracy and performance. Taper, plug and bottoming styles provide great ver-satility in tough materials, both blind and through holes.

TYPE 31 -UB TAPER TYPE 32 -UB PLUG TYPE 33 -UB BOTTOMING

Part Number of GH Qty. No. Size Flutes Limit per/pack ea.61741 3.0-.50 3 D-3 161742 4.0-.70 4 D-4 161743 5.0-.80 4 D-4 161744 6.0-1.00 4 D-5 161749 7.0-1.00 4 D-5 161751 8.0-1.00 4 D-5 161752 8.0-1.25 4 D-5 161753 10.0-1.25 4 D-6 161754 10.0-1.50 4 D-6 161759 12.0-1.25 4 D-6 161761 12.0-1.75 4 D-6 161762 14.0-1.50 4 D-7 161763 14.0-2.00 4 D-7 161764 16.0-1.50 4 D-7 161769 16.0-2.00 4 D-7 161772 18.0-2.50 4 D-7 161774 20.0-2.50 4 D-7 1

SETS TYPE 35-UB PLUG-TAPER-BOTTOM

TAPS - METRICTTyyppee 3355--UUBB SSeettssMMEETTRRIICC - Straight Flute - Includes one each Taper, Plug & Bottoming

Includes one of each size:Types 31-UB (Taper), 32-UB (Plug) and 35-UB (Bottoming) taps.

Taper StyleStarts the

thread square with

workpiece.

BottomingGenerates thethread to thebottom of blind

holes.

Plug StyleGenerally usedin thru holes orin blind holeswith sufficient clearance.

www.vikingdrill.com

1155

HEXAGON HIGH-SPEED STEEL DIES TTyyppee 2277--UUBBSpecial Hi-Molybdenum tool steel, polished gold finish with black surface treated threads for long life andrich appearance. These dies are used for threading rods, bolts, studs and other pieces requiring externalthreads. The outside hex configuration allows both wrench and die stock use in threading.

TYPE 27-UB HEXAGON HIGH-SPEED STEEL DIES TYPE 27-UB METRIC HSS DIESPart No. Size60511 3.0 x 0.5060521 3.5 x 0.6060531 4.0 x 0.7060551 5.0 x 0.8060561 6.0 x 1.0060581 8.0 x 1.2560601 10.0 x 1.5060621 12.0 x 1.7560622 14.0 x 1.50

Part No. Size61000 4-4061010 6-3261020 8-3261030 10-2461040 10-3261050 12-2461060 1/4-20

Part No. Size61070 1/4-2861080 5/16-1861090 5/16-2461100 3/8-1661110 3/8-2461120 7/16-1461130 7/16-2061140 1/2-13

Part No. Size61150 1/2-2061160 9/16-1261170 9/16-1861180 5/8-1161190 5/8-1861200 3/4-1061210 3/4-1661220 1/8-27 NPT61230 1/4-18 NPT

Part No. Size NPT Tap Drill Size61240 1/8-27(5/16 Shk) 11/3261250 1/8-27 11/3261260 1/4 -18 7/1661270 3/8 -18 37/6461280 1/2 -14 23/3261290 3/4 -14 59/6461300 1x11-1/2 1-5/3261310 1-1/4 x11-1/2 1-1/261320 1-1/2x11-1/2 1-47/6461330 2 x11-1/2 2-7/32

TYPE 30-UB TAPER PIPE TAPS

TAPER PIPE TAPSTTyyppee 3300--UUBBSpecial Hi-Tungsten and Hi-Molybdenum tool steels with and goldsurface treated body for rich, high quality appearance. Precisionground threads for the ultimate in accuracy and performance.Available in plug style with 3 to 3 - 1/2 thread chamfer.

TYPE 40 -UB COMBO DRILL & TAP

Part No. Size H Limits Overall Length20010 1/4-20 H3 2-1/220020 1/4-28 H3 2-1/220030 5/16-18 H3 2-23/3220040 5/16-24 H3 2-23/3220050 3/8-16 H3 2-15/1620060 3/8-24 H3 2-15/1620100 7/16-14 H3 3-5/3220110 7/16-20 H3 3-5/3220120 1/2-13 H3 3-3/820130 1/2-20 H3 3-3/8

Part No. Size H Limits Overall Length44300 4-40 H2 1-7/844310 6-32 H3 244320 6-40 H2 244330 8-32 H3 2-1/844340 8-36 H2 2-1/844350 10-24 H3 2-3/844360 10-32 H3 2-3/844370 12-24 H3 2-3/844380 12-28 H3 2-3/8

TYPE 29-UB REDUCED NECK TAPS - HIGH SPEED SPIRAL POINT

COMBINATION DRILL & TAPTTyyppee 4400--UUBBCombination drill and taps are ideally suited for on-site tapping in con-struction, maintenance and repair, assembly, production and other envi-ronments where one pass drilling and tapping saves time and costs. Hi-Molybdenum tool steel ensures longer tool life. Gold surface treatmentprovides maximum lubricity. The self-centering helical point providesexcellent drilling precision and accuracy.

SETS

Part No. Description of Sizes73991 7 pc set40-UB - DT-7F Fine 8-36, 10-32,1/4 -28,

5/16 -24, 3/8 -24, 7/16 -20, 1/2 -20

73990 7 pc set40-UB - DT-7C Coarse 8-32,10 -24,1/4 -20,

5/16 -18, 3/8 -16, 7/16 -14, 1/2 -13

REDUCED NECK TAPS TTyyppee 2299--UUBB

Reduced Neck Taps - High-Speed Spiral PointReduced neck taps for machine tapping applications. Reduced neck maximizes coolant flow in machine tapping application for ferrous and non-ferrous materials. Excellent for aluminum, magnesium, malleable cast iron and stainless steel materials. Hi-Molybdenum tool steel,with goldtreatment for maximum lubricity and reduced neck on tap provide maximum torsion strength for machine tapping applications

Part No. Size73770 4-4073780 4-4873790 5-4073800 5-4473810 6-3273820 6-4073830 8-3273840 8-36

Part No. Size73850 10-2473860 10-3273870 12-2473880 12-2873890 1/4-2073900 1/4-2873910 5/16-1873920 5/16-24

Part No. Size73930 3/8-1673940 3/8-2473950 7/16-1473960 7/16-2073970 1/2-1373980 1/2-20


1166

TAP & DRILL SETS

SSPP--1188TTDD SSppiirraall PPooiinntt,, NNCCPart No. Description of Sizes57580240-UB Drill Sizes #36, 29, 25, 21, 7, F,

5/16, U & 27/64

20-UB Tap Sizes 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14 & 1/2-13

SSPP--1188TTDDMM SSppiirraall PPooiinntt,, MMeettrriiccPart No. Description of Sizes57990643-UB Drill Sizes (mm) 2.05, 2.50, 2.90, 3.30, 4.20

5.00, 6.70, 8.50 & 10.2021-UB Tap Sizes (mm) 2.5-.45, 3.0-.50, 3.5-.60, 4.0-.70,

5.0-.80, 6.0-1.00, 8.0-1.25,10.0-1.50 &12.0-1.75

SSPP--1188TTDDFF SSppiirraall PPooiinntt,, NNFFPart No. Description of Sizes58010240-UB Drill Sizes #33, 29, 25, 21, 3, I , Q, 25/64 & 29/6420-UB Tap Sizes 6-40, 8-36, 10-24, 10-32, 1/4-28,

5/16-24, 3/8-24, 7/16-20 & 1/2-20

SSPP--1122TTDD SSppiirraall PPooiinntt,, NNCCPart No. Description of Sizes58501240-UB Drill Sizes #36, 29, 25, 21, 7, F

20-UB Tap Sizes 6-32, 8-32, 10-24, 10-32, 1/4-20, & 5/16-18

SSFF--1188TTDDCC SSttrraaiigghhtt FFlluuttee,, NNCCPart No. Description of Sizes60930240-UB Drill Sizes #36, 29, 25, 21, 7, F, 5/16, U & 27/6424-UB Tap Sizes 6-32, 8-32, 10-24, 10-32, 1/4-20,

5/16-18, 3/8-16, 7/16-14 & 1/2-13

SSFF--1188TTDDFF SSttrraaiigghhtt FFlluuttee,, NNFFPart No. Description of Sizes60940240-UB Drill Sizes #33, 29, 25, 21, 3, I ,Q, 25/64 & 29/64324-UB Tap Sizes 6-40, 8-36, 10-24, 10-32, 1/4-28,

5/16-24, 3/8-24, 7/16-20 & 1/2-20

SSFF--1100TTDD SSttrraaiigghhtt FFlluuttee,, NNCCPart No. Description of Sizes58500240-UB Drill Sizes 31/64

280-UB Drill Sizes 17/32, 21/32, 49/64 & 7/8

24-UB Tap Sizes 9/16-12, 5/8-11, 3/4-10, 7/8-9 & 1-8

SSPP--1188TTDD

SSPP--1122TTDD

TAP SETSTAP SETS SPIRAL POINT & STRAIGHT FLUTE

SSPP--1199TT -- TTyyppee 2200--UUBB Spiral Point Part No. Description of Sizes6611660000 0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-40, 4-48,

5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24 & 12-28

SSPP--1100TT -- TTyyppee 2200--UUBB Spiral PointPart No. Description of Sizes6611661100 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16

3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

SSFF--1100TT -- TTyyppee 2244--UUBB Straight FlutePart No. Description of Sizes6611662200 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16

3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

All Sets Packaged

in Sturdy Black Steel Index!


1177

TYPE 34-UB DRILL & TAP COMB0

CARDED DRILL & TAP COMBOTTyyppee 3344--UUBBDrill & Tap ComboHi-Molybdenum Super Premium twist drill combined with the corre-sponding Hi-Tungsten Ultra bor spiral point tap. Both tools are goldsurface treated for maximum lubricity. Precision ground tools for theultimate in accuracy and performance.

38 PIECE MRO PRO-PACK CARDEDDISPLAYTTyyppee 3344--UUBBPart No. 52001INCLUDES:11 eeaacchh ooff :: #36-6/32, #33-6-40, #16/12-24, #14/12-28

22 eeaacchh ooff :: #29/8-32, #29/8-36, #25/10-24, #21/10-32, #3/1/4-28, F/5/16-18, I/516-24, 5/16/3/8-16, Q/3/8-24, U/7/16-14, 25/64/7/16-20,7/64/1/2-13, 29/64/1/2-20

QQuuaanniittyy ooff 44:: #7/1/4-20 Combinations.

Part No. Size51807 6-3251817 6-4051827 8-3251837 8-3651847 10-2451857 10-32

Part No. Size51867 12-2451877 12-2851887 1/4-2051897 1/4-2851907 5/16-1851917 5/16-24

Part No. Size51927 3/8-1651937 3/8-2451947 7/16-1451957 7/16-2051967 1/2-1351977 1/2-20

HIGH SPEED STEEL TAP & DIE SETSSpecial Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity.Recommended for use in production tapping and drilling of work hardening grades of stainless steel andother hard metal applications Precision ground tap threads for the ultimate in accuracy and performance.

25 Pcs. SPIRAL POINT PLUG TAPS & HEX DIES PART NO. 35173Set contains:•• HHSSSS ssppiirraall ppooiinntt ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

• HHSSSS ppiippee ttaapp aanndd hheexx ddiiee ssiizzee:: 1/8-27 NPT•• TT--HHaannddllee ttaapp wwrreenncchh:: 3/16"-1/2"•• DDiiee ssttoocckk && SSccrreeww ppiittcchh ggaauuggee• SSPP--2255TTDDIISupplied in sturdy plastic case.

23 Pcs.METRIC SPIRAL POINT TAPS& HEX DIES PART NO. 35170Set contains:•• HHSSSS ssppiirraall ppooiinntt ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 3.0-.50, 3.5-.60, 4.0-.70, 5.0-.80 6.0-1.00, 8.0-1.25, 10.0-1.50 & 12.0-1.75

•• HHSSSS ppiippee ttaapp aanndd hheexx ddiiee ssiizzee:: 1/8-27 NPT•• TT--HHaannddllee ttaapp wwrreenncchheess:: 0 - 1/4" & 3/16"-1/2" •• SSttrraaiigghhtt hhaannddllee ttaapp wwrreenncchh:: #4 - 1/2"•• DDiiee ssttoocckk && SSccrreeww mmeettrriicc ppiittcchh ggaauuggee..• SSPP--2233TTDDIISupplied in sturdy plastic case.

15 Pcs. SPIRAL POINT PLUG TAPS & HEX DIES PART NO. 35174Set contains:•• HHSSSS ssppiirraall ppooiinntt ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 6-32, 8-32, 10-24, 10-32, 12-24 & 1/4-20

•• TT--HHaannddllee ttaapp wwrreenncchh:: 0 - 1/4"•• EEccoonnoommyy ddiiee ssttoocckk && SSccrreeww ppiittcchh ggaauuggee..• SSPP--1155TTDDIISupplied in black plastic case with clear sliding cover.

14 Pcs.METRIC SPIRAL POINT TAPS & HEX DIES PART NO. 35172Set contains:•• HHSSSS ssppiirraall ppooiinntt ttaappss ssiizzeess:: 2.5-.45, 3.0-.50, 3.5-.60, 4.0-.70,5.0-.80 & 6.0-1.00.

•• HHSSSS hheexx ddiieess ssiizzeess:: 3.0-.50, 3.5-.60, 4.0-.70, 5.0-.80 & 6.0-1.00 •• TT--HHaannddllee ttaapp wwrreenncchh:: 0 - 1/4"• SSPP--1144TTDDIIEconomy die stock & Screw metric pitch gauge. Supplied in black plastic case with clear sliding cover.

58 Pcs. STRAIGHT FLUTE PLUG TAPS & HEX DIES PART NO. 61680Set contains:•• HHSSSS ssttrraaiigghhtt fflluuttee ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1/8-27NPT & 1/4-18NPT. •• SSttrraaiigghhtt hhaannddllee ttaapp wwrreenncchheess:: #4-1/2" & 1/4"-3/4".•• DDiiee ssttoocckkss:: MED R/H & 1"R/H.•• TT--hhaannddllee ttaapp wwrreenncchh:: 0-1/4".•• SSccrreeww ppiittcchh ggaauuggee..•• SSccrreeww ddrriivveerr && SSppiirraall fflluuttee eexxttrraaccttoorrss ssiizzeess:: Ex 1 thru Ex 5.• SSFF--5588TTDDII

40 Pcs. STRAIGHT FLUTE PLUG TAPS & HEX DIES PART NO. 35171Set contains:•• HHSSSS ssttrraaiigghhtt fflluuttee ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

•• HHSSSS ppiippee ttaapp aanndd hheexx ddiiee ssiizzee:: 1/8-27 NPT•• TT--HHaannddllee ttaapp wwrreenncchheess:: 0 - 1/4" & 3/16"-1/2"•• SSttrraaiigghhtt hhaannddllee ttaapp wwrreenncchh:: #4 - 1/2"•• DDiiee ssttoocckk,, SSccrreeww ppiittcchh ggaauuggee && SSccrreeww ddrriivveerr• SSFF--4400TTDDIISupplied in sturdy plastic case.

40 Pcs. SPIRAL POINT PLUG TAPS & HEX DIES PART NO. 35181Set contains:•• HHSSSS ssppiirraall ppooiinntt ttaappss && HHSSSS hheexx ddiieess ssiizzeess:: 4-40, 6-32, 8-32,

10-24, 10-32, 12-24,1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.

•• HHSSSS ppiippee ttaapp aanndd hheexx ddiiee ssiizzee:: 1/8-27 NPT.•• TT--HHaannddllee ttaapp wwrreenncchheess:: 0 - 1/4" & 3/16"-1/2". •• SSttrraaiigghhtt hhaannddllee ttaapp wwrreenncchh:: #4 - 1/2". •• DDiiee ssttoocckk,, SSccrreeww ppiittcchh ggaauuggee && SSccrreeww ddrriivveerr..• SSPP--4400TTDDIISupplied in sturdy plastic case.

Supplied In

Sturdy Plastic Case!

DISPLAY ONLY Part No. 35100


1188

TAP & DRILL ASSORTMENTS SETSSpecial Hi - Tungsten and Hi - Molybdenum tool steel with gold surface treatment for maximumlubricity. Recommended for use inproduction tapping and drilling ofwork hardening grades of stainlesssteel and other hard metalapplications.Precision ground tap threads for the ultimate in accuracy and performance.

TAP & DIE COUNTERTOP DISPENSERSuper Premium Tap & Die Counter Top Dispenser 55 Piece, Spiral Point Taps & Hex Dies PART NO. 35160

TTyyppee 2200--UUBB5555--SSPP AAssssoorrttmmeenntt ccoonnttaaiinnss::SSuuppeerr pprreemmiiuumm ssppiirraall ppooiinntt ttaapp ssiizzeess::33 eeaacchh 6-32, 8-32, 10-24, 10-32 & 1/4-20 22 eeaacchh 5/16-18, 3/8-16, 7/16-14, & 1/2-13 11 eeaacchh 4-40, 12-24, 1/4-28, 5/16-24, 3/8-24, 7/16-20,

1/2-20,5/8-11, 5/8-18, 3/4-10, & 3/4-16SSuuppeerr pprreemmiiuumm hheexx ddiiee ssiizzeess::1 each 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-28,

5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 5/8-11, 5/8-18, 3/4-10, & 3/4-16

22 eeaacchh 1/4-20Includes glass front stocking cabinet.

Super Premium Tap & Die Counter Top Dispenser 53 Piece, Straight Flute Taps & Hex Die . . . . . . . PART NO. 35150Display Only . . . . . . . . . . . . . . . . PART NO. 45000TTyyppee 2233--UUBB5533--SSFF AAssssoorrttmmeenntt ccoonnttaaiinnss::SSuuppeerr pprreemmiiuumm ssttrraaiigghhtt fflluuttee pplluugg ttaapp ssiizzeess::33 eeaacchh 6-32, 8-32, 10-24,10- 32 & 1/4-20 22 eeaacchh 5/16-18, 3/8-16, 7/16-14 & 1/2-13 11 eeaacchh 4-40, 12-24, 1/4-28, 5/16-24, 3/8-24, 7/16-20,

1/2-20, 9/16-12, 5/8-11 & 3/4-10SSuuppeerr pprreemmiiuumm hheexx ddiiee ssiizzeess::11 eeaacchh 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-28,

5/16- 8, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 5/8-11,& 3/4-10

22 eeaacchh 1/4-20Includes glass front stocking cabinet.

Tap & Drill Dispenser Assortment 67 Piece, Spiral Point Taps & Jobber Length Drills . . . . PART NO. 351216677--SSPP AAssssoorrttmmeenntt ccoonnttaaiinnss::SSuuppeerr pprreemmiiuumm jjoobbbbeerr ddrriillll ssiizzeess::

66 eeaacchh #36, 29, 25, 2133 eeaacchh #7, F & 5/16 22 eeaacchh #3, I, Q, U, 25/64, 27/64 & 29/64

SSuuppeerr pprreemmiiuumm ssppiirraall ppooiinntt pplluugg ttaapp ssiizzeess::33 eeaacchh 1/4-2022 eeaacchh 6-32, 8-32, 10-24, 10-32 and 1 each 1/4-28,

5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

Includes 3 drawer stocking cabinet.

Tap & Drill Dispenser Assortment 123 Piece, Spiral Point Taps & Jobber Length Drills. . . . . . PART NO. 35120TTyyppee 2200--UUBB 112233--SSPP AAssssoorrttmmeenntt ccoonnttaaiinnss::SSuuppeerr pprreemmiiuumm jjoobbbbeerr ddrriillll ssiizzeess::

1122 eeaacchh #36, 29, 25, 21 66 eeaacchh #7, F & 5/16 33 eeaacchh #3, I, Q, U, 25/64, 27/64 & 29/64

SSuuppeerr pprreemmiiuumm ssppiirraall ppooiinntt pplluugg ttaapp ssiizzeess::66 eeaacchh 1/4-20 33 eeaacchh 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-1622 eeaacchh 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-1311 eeaacchh 7/16-20 & 1/2-20 Includes 3 drawer stocking cabinet

Tap & Drill Dispenser Assortment 123 Piece, Straight Flute Taps & Jobber Length Drills . . . . PART NO. 35110TTyyppee 2233--UUBB 112233--SSFF AAssssoorrttmmeenntt ccoonnttaaiinnss::SSuuppeerr pprreemmiiuumm jjoobbbbeerr ddrriillll ssiizzeess::

1122 eeaacchh #36, 29, 25, 21 66 eeaacchh #7, F & 5/16 33 eeaacchh #3, I, Q, U, 25/64, 27/64 & 29/64

SSuuppeerr pprreemmiiuumm ssttrraaiigghhtt fflluuttee pplluugg ttaapp ssiizzeess::66 eeaacchh 1/4-20 33 eeaacchh 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-1622 eeaacchh 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-1311 eeaacchh 7/16-20 & 1/2-20 Includes 3 drawer stocking cabinet

COUNTER DISPLAYSSILVER & DEMING DRILLS . . . . . PART NO. 00940Compact lexan case attractively displaysS&D drills. Scratch proof Lexan frontreduces pilferage and keeps merchandiseclean.Contents One Each of : 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16 & 1"

DISPLAY ONLY. . . . PART NO. 00943REAMERS . . . . . PART NO. 00941Compact lexan case attractively displays reamers. Scratch proof Lexan front reduces pilferage and keeps merchandise clean.Contents One Each of : 3/8, 1/2, 9/16, 5/8,11/16, 3/4, 7/8, & 1"DISPLAY ONLY. . . . . . . PART NO. 00943

ULTRA BOR SUPER PREMIUM

Tap and Drill gauge mounted on top of

CounterTop Dispenser14-3/4"

7-3/8"

7-3/4"

Corporate Office and Manufacturing Facility:

VViikkiinngg DDrriillll && TTooooll355 State StreetSt. Paul, Minnesota 55107PO Box 65278St. Paul, Minnesota 55165

OOrrddeerr TToollll FFrreeee::1-800-328-4655 (Personally Answered)

1-800-328-4654 (Electronically Answered)

PPhhoonnee:: 651-227-8911 FFaaxx:: 651-227-1793

Visit us @ www.vikingdrill.com

Part# 66439Printed in the USA Viking version: 2012

CCAAUUTTIIOONN::Any cutting tool may break or shatterunder improper use. Government

regulations require use of safety glassesand other appropriate safety equipment

at all times in the vicinity of use.

www.vikingdrill.com

Proudly Manufactured in the U.S.A.

Documents

Viking Ultra Bor 2012