Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

ni.com/myrio

Contents

NI myRIO-1900

Quick Start for LabVIEW Users

376046C-01 Nov19

Useful Links

Getting Started/Support ni.com/myrio/support

NI myRIO-1900 User Guide and Specificationsni.com/info myrio1900guide

Software ni.com/downloads

© 2019 National InstrumentsAll rights reserved.

• Xilinx Zynq System on a Chip• Analog Input (10 Channels)• Analog Output (6 Channels)• Analog Input and Output Also Available Through 3.5 mm Audio Jacks• 40 Digital I/O Lines; Wireless Enabled• Accelerometer, LEDs, and Push Button Onboard• 6 V to 16 V, 14 W Power Requirement• Compatible with NI myRIO Module; Powered by LabVIEW

For complete specifi cations, go to ni.com/info and enter the InfoCode myrio1900guide.

Projects and Example Code ni.com/myrio/projects

Cables

MXP Connector

AccessoriesSoftware

Power Supply

NI myRIO

Getting Started for C/C++ Usersni.com/myrio/c-support

Specifications

Taiwan BSMI RoHS (myRIO ONLY)For informa� on about Taiwan RoHS compliance, go to ni.com/environment/rohs_taiwan

台灣經濟部標準檢驗局RoHS (僅限myRIO)如需台灣 RoHS 法規的相關資訊，請參考ni.com/environment/rohs_taiwan

Caution Before installing your device, read all product documentation to ensure compliance with safety, EMC, andenvironmental regulations.

For more information about this product, please refer to ni.com/environment/rohs_taiwan. This link contains:• myRIO Chinese User Manual • Taiwan BSMI RoHS Information• How to retrieve myRIO manufacture date

想了解本產品更多信息，請參考 ni.com/environment/rohs_taiwan。該網址包含：

• 本產品中文手冊

• 本產品台灣RoHS限用物質含有情況標示

• 如何查詢本產品製造年份

Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

ni.com/myrio

Contents

NI myRIO-1900

Quick Start for LabVIEW Users

376046C-01Nov19

Useful Links

Getting Started/Support ni.com/myrio/support

NI myRIO-1900 User Guide and Specificationsni.com/info myrio1900guide

Software ni.com/downloads

© 2019 National InstrumentsAll rights reserved.

• Xilinx Zynq System on a Chip• Analog Input (10 Channels)• Analog Output (6 Channels)• Analog Input and Output Also Available Through 3.5 mm Audio Jacks• 40 Digital I/O Lines; Wireless Enabled• Accelerometer, LEDs, and Push Button Onboard• 6 V to 16 V, 14 W Power Requirement• Compatible with NI myRIO Module; Powered by LabVIEW

For complete specifi cations, go to ni.com/info and enter the InfoCode myrio1900guide.

Projects and Example Code ni.com/myrio/projects

Cables

MXP Connector

Accessories Software

Power Supply

NI myRIO

Getting Started for C/C++ Usersni.com/myrio/c-support

Specifications

Taiwan BSMI RoHS (myRIO ONLY)For informa� on about Taiwan RoHS compliance, go to ni.com/environment/rohs_taiwan

台灣經濟部標準檢驗局RoHS (僅限myRIO)如需台灣 RoHS 法規的相關資訊，請參考ni.com/environment/rohs_taiwan

Caution Before installing your device, read all product documentation to ensure compliance with safety, EMC, andenvironmental regulations.

For more information about this product, please refer to ni.com/environment/rohs_taiwan. This link contains:• myRIO Chinese User Manual • Taiwan BSMI RoHS Information• How to retrieve myRIO manufacture date

想了解本產品更多信息，請參考 ni.com/environment/rohs_taiwan。該網址包含：

• 本產品中文手冊

• 本產品台灣RoHS限用物質含有情況標示

• 如何查詢本產品製造年份

Required Software

my.com/learn-myrio

ni.com/learn-myrio

Required Software

Required Software

my.com/learn-myrio

Install software from DVD 1 of 2. The installer is confi gured to install only the software components you need to get started. Restart your computer when prompted.

Connect power to the myRIO device, then connect the USB cable from the myRIO device to the computer.

Allow 20 to 30 seconds for the computer to recognize themyRIO device. Launch the Getting Started Wizard and followthe prompts to install software on the device.

Use the test panel to test the onboard devices. Connect I/O accessories and start using myRIO. 44

332211

Additional Resources

Troubleshooting

DVD 1 LabVIEW Modules and Software

DVD 2 Tools for FPGA compilation

Communityni.com/community/myrio

4444 55 If the computer does not detect the myRIO device, try the following:

a. Make sure the software is installed on the computer. b. Check the power and USB connections. c. Restart the computer.

For a setup guide for lab administrators and other resources, including a complete troubleshooting guide, go to ni.com/community/myrio.

Required Software

my.com/learn-myrio

ni.com/learn-myrio

Required Software

Required Software

my.com/learn-myrio

Install software from DVD 1 of 2. The installer is confi gured to install only the software components you need to get started. Restart your computer when prompted.

Connect power to the myRIO device, then connect the USB cable from the myRIO device to the computer.

Allow 20 to 30 seconds for the computer to recognize themyRIO device. Launch the Getting Started Wizard and followthe prompts to install software on the device.

Use the test panel to test the onboard devices. Connect I/O accessories and start using myRIO. 44

332211

Additional Resources

Troubleshooting

DVD 1 LabVIEW Modules and Software

DVD 2 Tools for FPGA compilation

Communityni.com/community/myrio

4444 55 If the computer does not detect the myRIO device, try the following:

a. Make sure the software is installed on the computer. b. Check the power and USB connections. c. Restart the computer.

For a setup guide for lab administrators and other resources, including a complete troubleshooting guide, go to ni.com/community/myrio.