Update process for Smart Phone In order to update the Smart Phone, need to carry out the following procedures.

1Preparation:

1.1 :You need one USB cable for updating the Smart Phone.1.2: Insert USB cables to the USB port of computer before update the phone.

1.3Make sure that the computer has the USB driver before update the Smart Phone.2The procedure is as follow:

2.1: Open the Flash Tool

2.2: Click the Scatter-loading to choose the scatter document as follow:

The display is as follow

2.3: Click option->DA Download all , choose Disable DA Download all. Also should choose USB Mode2.4: Click the Download

Insert the USB cable to the phone

The phone is downloading the new software. The display is as follow:

The display is as follow:

2.5: if the display is as follow, It means the update is finished.

Picture 2-2