Embed Size (px)
Citation preview
TR FASTENINGSMarine Fasteners
TR FASTENINGSEXPERTS IN MARINE FASTENERS AND FIXINGSRE-FIT & MAINTENANCEwww.trmarinefasteners.com
TR FASTENINGSMarine Fasteners
1. Stayblack finish socket button head A4/316 consul bolts with nylon washer. Used for consul fixing where
the screw can be removed for inspection, without marking the dashboard.
2. Slotted clevis pin made to drawing A4/316. Also socket countersunk screw A4/316. Clevis pin made to drawing to fit exactly into location, no excess material. Socket countersunk screw used for flush fixing plates into foredeck.
3. Countersunk pozidrive machine screw A4/316 with plain washer, spring washer and Ni lock nut all A4/316. Pozidrive version of this screw used for quick application, good flush finish and fastened with a washer and full nut.
1.
2.
3.
For more information contact us now:t: 01202 440450e: [email protected]
TR FASTENINGSMarine Fasteners
4. Countersunk slotted machine screw A4/316 with plain washer and Ni lock nut all A4/316. Slotted
version of this screw used to support antennae secured with a washer and Ni lock nut.
5. Hexagon head set screw A4/316 with plain washer and Ni lock nut all A4/316.Also a dome nut A4/316. Hexagon set screw holding stainless trim firmly in place backed with a washer and Ni lock nut.Dome nuts used to lock hydraulic arm in place and cover end thread, otherwise exposed.
6. Hexagon head bolt A4/316 with plain washer, shake proof washer and dome nut all A4/316. Hexagon bolts used as a hinge for rear lifting doors with washer and dome nut to secure fitting.
7. Raised countersunk pozidrive self tapping screw A4/316. Self tapping screws used in preference to a woodscrew to hold hinges in place on galley door.
8. Hexagon headed bolt A4/316 with plain washer and Ni lock nut all A4/316.
Hexagon bolts used as a fixing for an engine support stay shown with washer and Ni lock nut to
lock in place.
4.
5.
6.
7.
8.
TR FASTENINGSMarine Fasteners
Sunseeker case studies and development work
The anti-vibration mount
A stainless steel fixing with a rubber shock absorber. Removes vibration from electronic component boxes.
Hose clips with stud
High quality marine hose clips with a stainless steel stud welded to the banding. Strong fixing for locating pipe work to bulkheads.
Special shackle pin
A flat headed slotted stainless steel shackle pin.Made for a flush aesthetic look and to avoid snagging.
Large diameter special bolt with nut and washer
M40 diameter stainless steel bolt ‘made to drawing’ complete with nut and washer. This bolt assembly supports the ram lifting system that opens the yacht’s boot.
Socket countersunk with polished head
M12 x 25 stainless steel socket countersunk screw with highly polished head. Holds the sliding door frame in place, polished to match the framework.
Build stages
Development work - plugs and moulds
1st stage - moulding • carpentry
Intermediate stage - plumbing • electrical • engineering
Fit out stages - flybridge • hardtop
Final stages - checks and testing • sea trials • cleaning
For more information contact us now:t: 01202 440450e: [email protected]
TR FASTENINGS About TR
Stainless steel fasteners
A massive range of standard and specialist fasteners are available in different grades of stainless steel.
Other products for the marine industry
Engine/gearbox bolting, high tensile steel, durlock bolts, shackle pins, tube ends for pulpits and pushpits, upholstery fixings, push buttons, tee nuts, male bigheads, screw caps, pozi caps, anti-vibration mounts.
General fasteners
Full range of machine screws, socket products, bolts and studding, nuts and washers, hexagon, countersunk, pan, raised, button and cap head fasteners from M0.6 to M42
Special manufacture
Our own factories in Asia and the UK produce over 6 billion components a year, many of which are specifically to customer drawings. In addition, our strategic partnerships with other world-class manufacturers allows us to offer a wide range of special parts specially suited to marine applications i.e. the anti vibration mount.
Turned parts
Turned parts to customer specification materials include steel, stainless steel, brass and other specialist materials.
Materials
Stainless steel a4 316, a2 304, silicone bronze, brass, aluminium, plastic, nylon, rubber and other non ferrous specialist materials.
Quality and inspection
To customers requirements including:Salt spray testing, optical sorting machines, ductility testing equipment, torsional strength testers, optical comparitor, vickers hardness tester, x-ray plating thickness test equipment.
Certification
QS9000, ISO9001:2008, TS16949Batch traceability as standard.
Vendor Managed Inventory
Getting high-volume, low-cost components from the supplier to the production line involves administration. This can add considerably to the total in-place cost of the parts. Our logistical supply systems can practically eliminate these administration processes and reduce the customer’s overall costs.
Engineering support
Experts in the marine industry are always on hand for support together with our online product guide with technical and dimensional information on 1000’s of fasteners.
For more information contact us now:t: 01202 440450e: [email protected]
TR FASTENINGSMarine Re-fit & Maintenance
For more information contact us now:t: 01202 440450e: [email protected]
TR Fastenings, supporting marine re-fit & maintenance
Increasingly we are seeing a global demand in supporting marine re-fits as this sector leads the way for opportunities in maintenance and conversion. TR has the capacity to meet demand and improve the entire re-fit experience for cost conscious owners and businesses.
Whether its structural modifications, interior refurbishment, IT and electrical installation upgrades, galleys or sun decks, TR has the products and the expertise to dramatically increase your productivity. TR can help you to understand the precise scope of the project and advise on the best products and services that will enable you to resolve technical issues, reduce in place cost whilst retaining maximum quality and integrity, so you can complete your project on budget and on time.
Experts in Marine fasteners & fittings •
Low cost application solutions and alternatives •
Dedication to quality & emphasis on service •
TR Fastenings Marine Website
Visit www.trmarinefasteners.com for more information on Marine, Re-fit & Maintenance. Here you can also access the TR Fastenings technical product guide which has dimensional information on 1000’s of products and a comprehensive fastener CAD library, with over 20,000 configurations, including fasteners for the marine industry.
The project toolkit has been designed to make specifying fasteners as easy as possible. With the Project Toolkit you can save fastener specifications from our site into individual projects making them much easier to find later.
With our toolkit you can:Generate TR par• t numbers for any item on our siteSave items into projects• Create as many projects as you need• Quickly send enquiries to TR•
Our online product knowledge base articles have been designed to assist customer application design and assemblies with added extras such as a conversion calculator and access to our engineering articles keeping you informed of all the latest news and developments.
TR MARINE FASTENERS Overview
Stainless Steel Fasteners A massive range of standard and specialist fasteners is available in different grades of stainless steel, including: • A2 • A4 • High-Strength Stainless
Clips
Hose • Rubber lined P Clips • Stauff Pipe ClipsMarine Grade Hose Clips manufactured by JCSHigh-Grip sizes: 12-500mm High-Torque sizes: 27-500mmRubber Lined P Clips manufactured in the UK for TRSizes: 12-110mm.Stauff Pipe Clips. Available in single and double combinations all diameters
Consumables
Glues • Sealants • Aerosols • Adhesives • Oils • Battery’s • Tapes • Gloves • HSS Drill Bits • and much more.
Marine Chandlery
Range: End Caps • Deck Fittings • Drop Nose Pins • Twisted Shackles • Carbine Hooks
A good quality selection of Chandlery available.
Plastics
Fasteners: Nuts • Washers • Screws • Rivets • Spacers
Caps • Bungs • Hexagon Head Covers • Tube Ends • Thread Protection • Cable Ties.
Bonding Fasteners
Range: Studs • Nuts • Collars • Pins
Sizes: Up to 12mm in diameter
Material: all in 316 Stainless Steel.
Threads: Male • Female
Bar Turned Parts
Special marine parts to drawing made in the UK for a quick turn around and TR Asia for larger volume.
Anti Vibration Solutions
Anti vibration mounts manufactured in 316 & Rubber • Rubber Anchor Nuts with Brass Nut inserts • Hose Clips with fixing stud to prevent tube movement • Nord-Lock Washers in 316, the Bolt Securing System • Flat/Rectangular Section Spring Washers in 316 • Shake Proof Washers in 316 • All Metal Self Locking Nuts.
For more information contact us now:t: 01202 440450e: [email protected]
TR FASTENINGSContact Us
[email protected]@[email protected]
UKt: 08454 811 800 f: 0870 458 7851e-mail: [email protected]
Irelandt: +353 (0)22 22301 f: +353 (0)22 22056e-mail: [email protected]
Netherlandst: +31 (0)541 511515 f: +31 (0)541 517134e-mail: [email protected]
Norwayt: +47 67 06 70 00 f: +47 67 06 70 10e-mail: [email protected]
Swedent: +46 (0)8 578 44 900 f: +46 (0)8 578 44 950e-mail: [email protected]
Hungaryt: +36 24 516 972 f: +36 24 516 961e-mail: [email protected]
Polandt: +48 (22) 402 36 14 f: +48 (22) 402 36 24e-mail: [email protected]
Czech Republict: +420 222 212 509 f: +420 222 253 762e-mail: [email protected]
Singaporet: +65 6759 6033 f: +65 6759 6022e-mail: [email protected]
Malaysiat: +604 508 3931/2 f: +604 508 3942e-mail: [email protected]
Chinat: +86 21 5032 5696 f: +86 21 5032 5775e-mail: [email protected]
Taiwant: +866 7 552 5577 f: +886 7 552 7033e-mail: [email protected]
Indiat: +91 967707 1807 m: +65 9684 1763e-mail: [email protected]
USAt: +1 623 879 6702 f: +1 623 581 0147e-mail: [email protected]
Mexicot: +1 623 879 6702 f: +1 623 581 0147 e-mail: [email protected]
Costa Ricat: +506 88 43 60 15 e-mail: [email protected]
