TR-75TRACKED RADIAL CONVEYOR

R

SPECIFICATION:Conveyor Length: 22.9M (75 ft ) Net Engine Power: Tier 3: Deutz D2011 L04i – 4 cyclinder 36kW (48hp) air-cooled diesel engineTier 4: Deutz L04 45kW (60hp) air-cooled diesel engineTier 3: Stage 3A CAT 4.4 engine: 4 cylinder diesel engine developing 83kw (111hp) @1800rpm Tier 4F/ Stage IV: Caterpillar C4.4 - 4 cylinder diesel engine developing 82kW (110 Hp) @ 1800 RPMPortability: Tracked

TR-75

POWERUNITTier 3: Deutz D2011 L04i – 4 cyclinder 36kW (48hp) air-cooled diesel engine

Tier 4: Deutz L04 45kW (60hp) air-cooled diesel engine

Tier 3: Stage 3A CAT 4.4 - 4 cylinder diesel engine developing 83kw (111hp) @1800rpm

Tier 4: Tier 4F / Stage IV - Caterpillar C4.4 - 4 cylinder diesel engine developing 82kW (110 Hp) @ 1800 RPMFuel tank volume: 180 litres

FEEDBOOTStandard Feedboot Capacity: 0.6 m3

Feed in width: 1300mMin Feed height: 2400mmExtended Feedboot Capacity: 1.6m3

Feed in width: 1850mMin Feed height: 2750mm

CONVEYOR:Conveyor length: 22.9M – 75ftBelt width: 1050mm (42”)Belt spec: 3 ply, 4 + 2 plain beltConveyor drive: twin speed variable speed, 108m/min Optimum working angle: 18⁰Optimum discharge height: 9mMax. stockpile capacity - Conical: 1344m3

Max Stockpile Capacity – 135⁰ Kidney Bean: 6764m3

Max. working angle: 23⁰Max. discharge height: 10.9mMax. stockpile capacity - Conical: 2388m3

Max Stockpile Capacity – 135⁰ Kidney Bean: 10040m3

Capacity: up to 600TPH Based on 100mm Lump size at 18⁰ working angle. Max belt speed.Hydraulic feed in height adjustmentHydraulic fold over for transportSpring mounted poly blade head drum scraper

UNDERCARRIAGE Crawler tracks with pendant control system (NOT radio controlled)Speed: single speed tracking,Single radial wheel driveTracks 1800mm centers, 400mm shoe.

ELECTRICALHand held track control set with connection leadEmergency stops x 2Engine prestart delay & sirenRadio remote control system for crawler tracks

SPECIFICATION

Feedboot Extensions

Hydraulic Feed Adjust

Under Conveyor Guards

Twin Conveyor Motors

TR-75GENERALDischarge head drum bearing automatic greasing cartridge

Low level greasing

Orange-RAL2002. Special paint colour (if different from above). RAL must be specified on order

PACKAGINGRoll on Roll off transport (RoRo)Containerisation, packed into 1 x 40ft high cube container

OPTIONSCanvas dust covers on discharge conveyor

Canvas dust covers complete with dust hood on discharge conveyor

Twin drive discharge conveyor Full length side skirting along discharge conveyorHigh spec discharge conveyor head drum scraperAnti-roll back flaps Discharge belt upgraded to 3ply heavy duty beltDischarge conveyor underguard option length of mid sectionDust suppression at discharge conveyor head drumBelt weigher optionRadio remote, raise / lower discharge conveyor Pull Cord E-stop running length of discharge Conveyor Radio remote to Track machineTelemetryFeedboot lined 6mm wearplateExtended feet boot lined 6mm wearplateHopper flares lined 6mm wearplateTwin radial wheel drive

TRANSPORT DIMENSIONS

WORKING DIMENSIONS

15.6m (51’ 3”) 2.25m (7’ 5”)

3.m

(10’

)

5.29m (17’ 4”)22.7m (73’)

11.6

5m (3

8’ 3

”)

Effective June 2018. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex USA LTD. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2010 Terex USA Ltd.

Follow Us:

TM

R

www.terexfinlay.com

FEED BOOTu Capacity: 0.6m3 u Feed height: 2750mmu Feed in width: 1850mm

DISCHARGE CONVEYOR:u Conveyor length: 22.9mu Belt width: 1050mmu Optimum working angle: 18⁰u Optimum discharge height: 9mu Stockpile capacity at optimum working angle based on 37⁰ angle of repose: Conical: 1344m3

u Max. working angle: 23⁰u Max. discharge height: 10.9mu Max. stockpile capacity based on 37⁰ angle of repose: Conical: 2388m3

u Capacity: up to 500tph. Based on 100mm Lump size at 18⁰ work angle. Max belt speed.

UNDERCARRIAGE:u Crawler tracks with pendant control systemu Speed: single speed trackingu Single radial wheel driveu Tracks 1800mm centers, 400mm shoe

POWERUNIT: u Tier 3: Deutz D2011 L04i – 4 cyclinder 36kW (48hp) air-cooled diesel engine u Tier 4: Deutz L04 45kW (60hp) air-cooled diesel engineu Tier 3: Stage 3A CAT 4.4 engine - 4 cylinder diesel engine developing 83kw (111hp) @1800rpmu Tier 4: Tier 4F / Stage IV - Caterpillar C4.4 - 4 cylinder diesel engine developing 82kW (110 Hp) @ 1800 RPM