Upload
lythien
View
222
Download
0
Embed Size (px)
Citation preview
Toolfair & Elex 2017 – Build-up/Breakdown
Following are guidelines for build-up and breakdown: 1) Exhibition timings
Build-up
Wednesday 20th September All Exhibitors 8.30am – 7.00pm Gangways must be cleared by 7.00pm Thursday 21st September All Exhibitors 8.00am – 9.30am Gangways must be cleared by 9.30am Show opening times Thursday 21st September 10.00am – 4.00pm
Friday 22nd September 10.00am – 4.00pm
However by 9.30am on each morning, we would expect all the ‘finishing touches’ to your stand to be completed and all stand personnel ready to receive any ‘early’ visitors. Breakdown
Friday 22nd September - 4.00pm – 7.00pm BREAKDOWN MUST BE COMPLETED AND HALL CLEARED BY 7.00PM Please ensure that any contractors working on your stand are also aware of all regulations and restrictions.
2) Due to the width of the show’s gangways, any exhibitor displaying a large item on their
exhibition stand ie an item that should be in your allocated stand area before the exhibition shell scheme is erected (eg a vehicle) must notify me immediately. I will need to allocate a specific time for delivery of the vehicle/item during build-up. If I am not notified of your special requirements before Friday 8th September, I cannot guarantee we will be able to accommodate you on the day.
3) Build-up & Breakdown Proceedure
I have enclosed various maps showing venue location and the loading gates to the exhibition hall. Vehicle passes are included for both gate G26 and G29. Please choose the pass for the loading gate with the best access to your stand (gates are marked on the floorplan)
To make this process a quicker, safer and more structured experience, the Ricoh have supplied the following build up and breakdown procedure; Build-up
1) Display your exhibitor pass in your windscreen before arriving onsite 2) Report to the traffic marshal at the main gate on arrival 3) Follow the instructions of the traffic marshal - you will either be directed to the holding car park
or straight to the loading gates. 4) Once you have been given permission to access the loading gates, please ensure that you unload
your vehicle as quick as possible. 5) Once you have finished unloading your vehicle at the loading gates, please move your vehicle
immediately to the allocated exhibitor car park, which is Car Park C. Please note – Car Park C will be locked up 30 minutes after tenancy finishes, and reopened 30 minutes before tenancy starts the next day – any overnight parking must be booked in with Ricoh Arena prior to the event.
Box Storage Box storage is available onsite near the exhibition hall for shell exhibitors only to use – please note, this is on a first come first served basis as there is only limited space available. This facility is not to be used by contractors or for any construction material. All boxes must be labeled with the stand name, number and contact details.
It is recommended, that exhibitors use this space to store their boxes in preparation for breakdown on Friday. Once build-up has finished, there is only 2 hours on Friday afternoon to drop your boxes off at one of the loading gates. Once this period, has closed you will be directed to CAR PARK C to form part of the queuing system for the loading gates.
Please contact the onsite information point at your loading gate for further details on storage.
Box and Tool Drop Off The box and tool drop off period is from 14:00 till 16:00 on Friday afternoon, this is for exhibitors and contractors to drop off their boxes and tools required for breakdown. You must report to the main gate from 14:00 and the traffic marshals will direct you to the allocated drop off zone. Once you have dropped off your items, you must then park your vehicle in CAR PARK C.
Any vehicles after 16:00 will be sent to Car Park C to form part of the queuing system for the loading gates.
Breakdown To get your vehicle to the loading gates, please follow the process below.
1) Display your exhibitor pass in your windscreen before arriving onsite 2) Park your vehicle in Car Park C – there will be no access to the loading gates if you are
not parked in CAR PARK C. 3) Break down your stand first, this includes equipment and all content material - this must be
all boxed up ready to load. 4) Go to your allocated loading gate and collect your vehicle movement pass from the
information point. 5) Your stand will be checked and your vehicle movement pass will only be issued if your
stand has broken down fully. 6) Go to your vehicle with your pass, place the pass in your windscreen, and await the
availability of space at your loading gate. 7) Once released from cark park C proceed to your allocated gate and load your vehicle
quickly – this will allow others to bring their vehicles up. 8) Once loaded, please depart the Ricoh Arena following the one way system.
4) Parking is free of charge for all exhibitors and visitors.
5) The organisers office is located between stands A10 & A12. The contact number in the office,
from Wednesday 20th September, is 0844 873 6517. 6) Stand personnel must wear Exhibitor badges at all times. These can be pre-ordered from the
show website (www.elexshow.info or www.toolfair.info) 7) There will be members of staff from Hamerville on site during build up, who can assist your
staff during the day and there will also be staff from our contractors on hand to help with your shell scheme or electrical requirements. A service desk will be set up in the exhibition hall.
Please provide the staff who will be building up your stand with the necessary copies of forms that needed to be completed for the shows contractors, for reference on the day, as these should have been returned directly to the contractors. Hamerville do not have copies of these forms so resolving any problems on the day would be made much easier if these were available.
8) There has been a change in the law within the Events Industry in regards to CDM (Construction Design and Management). The Ricoh Arena is enforcing this new legislation. It is very important that you read the CDM Site Induction. Please make sure that you brief all staff working on your stand. If you have any contractors on your stand, they will also need to be given a copy of the CDM Site Information.
Issue Number : 182Issue Date : 11:51:48Updated By : cshannonScale : N.T.S.
2
2
2
2 2
22
32.5
2
2.5
2
2.5
2
22
2
2
2
3
2 2
2
3
2
Coventry 21st & 22nd September
Toolfair & Elex 2017
86
3 3
63
3
6
8
44
3
2
6
3
6
3
3
3
3
6
3
6
4
3
2
4
6
5
3
5
3
5
3
3
2
3
6
3
3
3
3
4
3
3
7
6
7
3
3
6
3
6
36
4
4
3
6
33
6
3
10
3
6
3
3
2
4
6
4
6
3
6
3
3
3
6
6
3
4
6
4
8
8
8
6
8
6
8
6
33
10
44
6
3
1
3
4
10
10
8
3
4
4
3
3
5
6
3
4
6
4
4
4
4
3
6
18
17
18
17
6
6
6
3
3
6
5
3
6
3
5
3
3
46
5
5
6
4
3
4
7
3 6
5
6
5
3
5
3
3
3
3
3
3
333
3
4
3
3
3
6
3
3
4
3
4
5
6
3
2
5
2
4
8
4
8
6
5
3
3
34
3
10
10
12
6
6
12
6
8
6
9
3
8
55
22
22
6
6
44
6
3
3
12
4
3 3
4 2
3 3
3 3
3 3
3 3
3 3
3 3
3
3
2
6
3
4
3
5
3
3
9
3
4
6
8
6
8
6
11
4
6
4
4
3
2
55
2
5
4
5
3
3
6
4
44
4
5
2
3
5
3
34
4
4
7
7
6
4
8
43
3
44
3
6
3
5
3
4
6
4
1
3
3
7
5
5
8
5
3
4
4
4
2
4
3
4
4
1
6 3
3
3
5
3
3
2
3
24
18 18
18
32
6
18
18
9
18
24
6 24
15
15
156
6
18
9
12
9
4218182412
1818
30
18
624 241818
18
24 64 48 48
18
40
18
10
12 80
1212
15
18
24
16
1618
306
36
18
18
15
18
15
12
30
30
12
28
9
30
30
15
999999
12
9
18
12 12
30
610
32
48
15
912
120
3672
48
27
40
132
24
18
36
12 12 6 9 9 9 9 9 9
6
18
12
15
27
12
48
66
24
12
10
10
20
15
9
18
16
20
6
15
9
16
16
42
32
12
9
12
12
9
18
1524
6
9
423040
12
16
8
12
12
12
18 6
9
15
9
6
TradeSurvey
Tremco Anglia (Trend)
DartOx Group
Tainer
Time Guard
Imex
RFSolutions
WagoHamilton
Linian Clip
Wiska
Kopos
Fluke
Beha Amprobe Pilot Pen
Vespula
Luceco
Crabtree
Brother
SPDAnsellLewdenSchneider
HagerEasyview
LeicaMetabo
Bahco
LED Hut
SparkSafe
LS Starrett ArmegFeinThanet
Thanet
Makita Festool Anglia Tools(Milwaukee)
Super Rod
Wera
Napit SaxbyLighting
Seminar Area
Farho Fike
Steinel
GewissIsuzu
Blauberg
ArmourHome
Milwaukee
Catering Area
IETMKContactum
GAP
Megaman
ECI
Schnabl
Bott
MICC
Nest
Y3K
ESP
Ideal Chint
ECSScrewfix
Click
Denmans
Megger
ClikElectrorad
NICEIC/
ELECSA
AicoIrwin
Jobman
FiatCommercial
Stanley Black and Decker
ITW
Quadsaw
Draper
123 ITWORKS
A Plan SparkSafe
BigWipes
PJWiseman
WagoBox Volex Optonica
LEDFlex
Connectors
Energenie
Envirovent
ASBAC
Tainer
Trumpf
Hitachi
BOSCHInels
CR Laurence
3M
Stroma
BEG
Uniwipe
Klein
TIS
Packexe
Daxlite
Kanlux
Wiha
Vanguard
Polypipe
Wylex
BEW
GDC Group
ActionCan
Labcraft
KewtechKnipex
LED UK
Bristor
Metrel
RiscoGroup
IMOLamp Shop
Online
Ridgid
Nordtronic
GiraFuelcardServices
TaisonLighting
Q Group
BigWipes
Energenie
VE DOOR - GATE 29.Stands in the green zone
please use this door to load
VE DOOR - GATE 26.Sands in the Yellow zone
please use this door to load.
A1 A2 A4
B2 B6
B8
B10
B12
B18 B20 B22
B24
B26 B34
B36
B38 B40
B43
C40
C43
C44
C38C36C34C30
C27C24
C22C12
C14
C18
C20
C6 C10C4C2
D2
D4
D10 D12 D16
E20
D24
D26 D30
D32 D38
D40
D44 D48
D56
D54D58
E56 E60
E62
E48
E50
E52
E54
F54
F56
F44
F46
F48 F50
F52
F60
G26G24G22G20G18G16
E44
E47
E40
F34 F40
F36
E34E31
E32
F32
E26
E29E25
F28F22F10
F16
G1
F4
E6
F2
D3
C1
A6 A8 A10 A12 A14 A17 A18 A20 A22
C26
F20
B44
D46
D60
F1
D20
E1
F3
E42
B9
C28
D34
C32
D1
E22
F33
F24
B4
E24
E28
F38
F35
B30
D35
A16
B41
B45
C42
B19
B14
C31
C29
F49
F47F37
F8
B42
D49
D50D52
B3
D42
B15B25
E46
B39
F25
F27
Exit
Exit
Exit
Exit Exit ExitExit
ExitExit
ExitExitExit
VE D
oor VE D
oor
Bar
Roller Shutter
StandCatering
StoreStore
Hall 1 EntranceHall 1 Entrance Hall 2 Entrance
WC OfficeKioskKiosk
BarWC
OrganisersOffice
Hall 1 Hall 2
. .
Contractors Site Induction Information – 27/07/15 - PC
Fire Evacuation Procedures for the Ricoh Arena
The Ricoh Arena is a multi-functional site that hosts a variety of events, ranging from small meetings to pop concerts. In the event of fire, the safety of its visitors, contractors, guests and staff shall override all other considerations, such as saving property or attempting to extinguish the fire. Visitors and contractors to the venue should always report any concerns regarding fire safety to their venue event manager or any member of Ricoh staff immediately.
_____________________________________
If the Fire Alarm is activated there may be two stages to the alarm or dependant upon
the location it may go into immediate evacuation
If a pre alert is activated – you will hear the following message:
“Attention please, attention please, there is a security alert within the building, please listen carefully for further announcements”
AT THIS STAGE YOU DO NOT HAVE TO DO ANYTHING - BUT BE PREPARED TO
EVACUATE IF NECESSARY
OR
If an evacuation is necessary – you will hear the following message:
“Attention please, attention please, an emergency situation has arisen, please evacuate the building by the nearest available exit”.
EVACUATION PROCEDURE
Please use the nearest fire exit located to the area that you are in, or directed to by staff
Make your way to the nominated Fire Assembly Point (Car Park A or Car Park B) dependent upon your location
Do not re-enter until told to do so by the Assembly Point Marshal
STAND DOWN MESSAGE If an alarm has activated but does not require an evacuation then a stand down message will be made by building staff across the public address system. This will be heard even in areas that have not been affected by the pre alert; this is the confirmation that you do not have to take any action.
Contractors Site Induction Information – 27/07/15 - PC
Ricoh Arena Contractors Site Induction Information Welcome to the Ricoh Arena. Prior to coming onto site you should have liaised with your on-site contact and agreed the scope of works for the job you are doing. You should have provided your risk assessments, method statements and insurance documents prior to commencing work and you are required to work to these at all times. As part of our safety responsibilities on site we need to share some information with you about our emergency arrangements and in turn you need to ensure you share it with all of your staff, sub-contractors etc. on site. Please read the information carefully and if you have any questions please speak to your on-site contact BEFORE you commence work.
Fire
Ensure you and your staff are aware of the site fire emergency procedures overleaf
If you discover a fire take the following action
Raise the alarm by operating a red manual call point closest to the fire.
Clear the area of all persons – Get out, Get Others out, Stay Out !
If safe, and you are trained to do so tackle the fire with an appropriate extinguisher
Any hot work on site requires a “Hot Work Permit” from Facilities Management Team
Any works likely to create dust / smoke etc. MUST not be carried out until authorised by Facilities Management Team and the fire alarm system temporarily isolated in the area of work.
First Aid
As part of your company safety arrangements you should have a first aider or appropriate measures in place to deal with workplace first aid requirements.
In the event that you need first aid assistance Ricoh Arena have first aiders on site and first aid assistance can be requested via Guest Services based at the North Atrium entrance where you signed in on site.
First aid kits are located around the building or from Guest Services.
An AED is also available and this is also located at Guest Services.
If an ambulance is required this should be requested via Guest Services or in extreme emergency via 9-999 on any internal telephone.
All accidents must be reported to the Ricoh Arena Health & Safety Manager.
Safety
This building has large numbers of public and other staff on site. Ensure your work area is left safe and free of hazards at all times or ensure appropriate signage and barriers are in place.
PPE MUST be utilised if your method statement and risk assessment require it.
Only work in areas that have been assigned to you
Be aware of other activities around you and ensure that the necessary information has been exchanged to ensure no conflict of works. If in doubt STOP and seek advice
Report all accidents and near misses immediately to your onsite contact
Any safety issues speak to the Ricoh Arena H&S Manager on 07773 616 423
Toolfair/Elex 2017
Exhibitor Onsite Pass
G26
Name: ________________________
Company Name: ________________________
Vehicle Registration: ________________________
Contact Number: ________________________
Stand Name: ________________________
Stand Number: ________________________
Please display this pass in your windscreen before arriving onsite - this must remain dis-played until your departure offsite at the end of the event.
Vehicles not displaying their pass, or incomplete passes, will not be permitted up to the loading gates.
Please ensure you read the build and breakdown procedures before arriving onsite.
Toolfair/Elex 2017
Exhibitor Onsite Pass
G29
Name: ________________________
Company Name: ________________________
Vehicle Registration: ________________________
Contact Number: ________________________
Stand Name: ________________________
Stand Number: ________________________
Please display this pass in your windscreen before arriving onsite - this must remain dis-played until your departure offsite at the end of the event.
Vehicles not displaying their pass, or incomplete passes, will not be permitted up to the loading gates.
Please ensure you read the build and breakdown procedures before arriving onsite.