Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Application No.
(for office use only)
INSPECTION REPORT[FULL TIME – GENERAL / 1st SHIFT – THIRD YEAR]
FOR POLYTECHNIC COLLEGES ESTABLISHED / AFFILIATED UNDER FULL TIME – GENERAL / 1st SHIFT – THIRD YEAR
2016-2017Name of the Trust / Society
:
Name of the Institution :Institution Code :District :Established during :Mode : FULL TIME – GENERAL / 1st
SHIFTDate of Inspection :First year Affiliation order No. with dateSecond year Affiliation order No. with date
Name & Designation of Convenor
:
Name & Designation of Member
:
Name & Designation of Member
:
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 2
2016-2017
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 3
INSPECTION REPORTINSPECTION REPORT FOR POLYTECHNIC COLLEGE ESTABLISHED / AFFILIATED
UNDER FULL TIME – GENERAL / 1st SHIFT – THIRD YEAR
Date of Inspection : -- --
Time of Inspection
01. Name and Designation of the Convenor :
:
Name and Designation of the Member :
:
Name and Designation of the Member :
:
02. Year of establishment of the Institution :
03. AICTE Letter of Approval No. & Date :
04. DETAILS OF THE AICTE APPROVED COURSES TO BE INSPECTED – FULL TIME – GENERAL / FIRST SHIFT PROGRAMME
Sanctioned Intake
2014-15 2015-16 2016-2017
AICTE Approval Letter No. & DateS.No Discipline [Course
Details]III Year II Year I Year
01.02.03.
for 2014-15
04.
05.
for 2015-16
06.
TOTAL ANNUAL INTAKEfor 2016-2017
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 4
05 (a) NAME AND ADDRESS OF THE INSTITUTION AT THE PERMANENT SITE
Name of the Institution :
Address of the Institution :
Village / Town :
Taluk :
District :
Pincode :
Assembly Constituency :
Parliament Constituency :
Phone : STD Code: Phone No.:
Fax : STD Code: Fax No.:
Mobile :
E-mail :
05 (b) NAME AND ADDRESS OF THE SOCIETY / TRUST / COMPANY ESTABLISHED UNDER SECTION 25 OF COMPANIES ACT 1956
Name of the Trust / Society / Company :
Address of the Trust / Society / Company :
Village / Town :
Taluk :
District :
Pincode :
Assembly Constituency :
Parliament Constituency :
Phone : STD Code: Phone No.:
Fax : STD Code: Fax No.:
Mobile :
E-mail :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 5
06 (a) DETAILS OF THE SOCIETY / TRUST / COMPANY
Society Registration Act No. / Trust Act No. / Company Act No. :
Registration No. :
Date of Registration :
Place of Registration :
06 (b) DETAILS OF THE LANDS [PERMANENT SITE AS APPROVED BY AICTE]
Classification of the Permanent Site : Rural Area
(Please Click on any one of the classification) Other than Rural area
Ownership of Land : Government Trust SocietyGovt. Leased Owned Company
Details of Land(The Survey No. with sub-division and extent of lands for each survey number to be indicated)Sl.No.
RegistrationDocument No.
RegistrationDate
Name of the village
Survey No. with sub-division
Extent of Lands
(in acres)
Land Classification [Indicate Dry or Wet Land]
TOTAL ---
06 (c) DETAILS ABOUT THE BUILDING OF THE INSTITUTION AT THE PERMANENT SITE
Whether the Building Plan is approved by the competent authority : Yes No
Name of the authority approved the building plan :
Designation of the authority approved the building plan :
Date of Approval with Proceedings Number :
06 (d) PHYSICAL INFRASTRUCTURE - COMPLETE DETAILS OF BUILT-UP AREA
FIRST YEAR, SECOND YEAR AND THIRD YEARS.No
Built-up (Carpet) Area[in sq.m] Structure [RCC] Required Area Available Area
(a) Instructional area [INA] RCC
(b) Administrative area [ADA] RCC
(c) Amenities area [AMA] RCC
TOTAL AREA :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 6
07. PRINCIPAL
(*) As per AICTE regulations 2013, please refer to Gazette of India Notification dated 5th March 2010, Pay Scales, Service Conditions and Qualifications for the teachers and other academic staff in technical Institutions (Diploma) Regulations, 2010. Also refer AICTE Website: Bulletin – FAQ section. For PRINCIPAL : Bachelor’s degree and Master’s degree of appropriate branch in Engineering / Technology with First Class or equivalent either Bachelor’s or Master’s level and Ph. D in Engineering / TechnologyEXPERIENCE : Minimum of 10 years relevant experience in teaching / Research / Industry out of which at least 3 years shall be at the level of head of department or equivalent. AGE : Permissible Maximum age limit : 65 YearsGUIDELINES :AGE : If the age of the Principal is 65 years, then Marks to be allotted is : 05, Otherwise 00.£QUALIFICATION : If the Qualification is Ph.D, then Marks to be allotted is 05
If the Qualification is M.E., then Marks to be allotted is 03, Otherwise 00.EXPERIENCE : If the Experience is 12 years, then Marks to be allotted is 05³ If the Experience is between 10 and < 11 years, then Marks to be allotted is 03, Otherwise 00.³
a. Name :
b. Qualification :
c. Experience (in years) :
d. Date of Joining :
e. Date of Birth & Age :
S.No Description Details Maximum Marks Marks Secured
f. Age 05
g. Qualification 05
h. Experience 05
TOTAL MARKS : 15
TOTAL MARKS SECURED FOR PRINCIPALCADRETOTAL MARKS SECURED5 xTOTAL MAXIMUM MARKS
=
08. FACULTY AND STAFF REQUIREMENTS [FIRST, SECOND AND THIRD YEAR ONLY]
(i) TOTAL SANCTIONED INTAKE [ I + II + III YEARS] :
(ii) TOTAL STAFF REQUIRED [at the ratio of 1 : 20] :
(iii) TOTAL STAFF AVAILABLE [ON THE PAY ROLL] -
(iv) STAFF STUDENT RATIO [BASED ON PAYROLL] -
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 7
(v) DETAILS OF FACULTY [BASED ON PAYROLL] -
Discipline HOD Lecturer TOTALREQUIRED AVAILABLE REQUIRED AVAILABLE REQUIRED AVAILABLE
1. FIRST YEAREnglishMathematicsPhysicsChemistryEngineering
2. SECOND YEARCIVILMECHANICALEEEECECOMPUTERITAUTOMOBILEMARINEMECHATRONICS
3. THIRD YEARCIVILMECHANICALEEEECECOMPUTERITAUTOMOBILEMARINEMECHATRONICS
TOTAL :
S.No Category Maximum
MarksRequired as per AICTE
NormsAvailable Shortage
Secured MarksMax.Marks x Available
Requiredé ùê úë û
a. Faculty for I / II / III Year 15
b. Librarian 02c. Physical Education
Director02
d. Technical Supporting Staff [Non-Teaching] 02
e. Administrative Staff 02f. Basic Servants 02
TOTAL MARKS : 25 MARKS SECURED :
REQUIREMENT– ALL THE FACULTY & STAFF SHOULD BE ON PAY ROLL.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 8
Faculty for First year : Faculty : Student Ratio = 1 : 20 – must be computed based on Sanctioned intake only. While computing Faculty Student ratio - Principal, Librarian, Physical Director, Non-Teaching, Ministerial staff and identified staff, if any, should not be included. Marks should be awarded proportionate to faculty available in the institution. Criteria enclosed as Annexure.
Librarian : OnePhysical Education Director : OneTechnical Supporting Staff : Workshop Instructor : 1
Skilled / Lab. Assistant : One Lab. Assistant for each laboratory [as in odd semester]
Unskilled Assistant : One Assistant for each DepartmentAdministrative Staff : As per Institutions requirement – Can be in the cadre of Superintendent,
Assistant & Typist – Minimum 3 is desired.Basic servants : As per Institutions requirement – Can be in the cadre of Office Assistant,
Watchman, Sweeper & Sanitary Worker – Minimum 4 is desired.
09. LIBRARY
S.No Description Max
MarksRequired as per AICTE
NormsAvailable Shortage
Secured MarksMax.Marks x Available
Requiredé ùê úë û
B1 : 50/year
B2 : 25/coursea. Number of Titles 03B3 : 25/course
B4 : 250/ Division
B5 :125/ Division
b. Number of Volumes 05
B6 : 125/ Division
c. No. of Journals 02 B7 : 03/ Division
TOTAL MARKS : 10 MARKS SECURED :
REQUIREMENTS - LIBRARY
B = Number of Divisions [1 Division = 60]. If the Institutions has got approval from AICTE for the conduct of 5 Courses with a sanctioned intake of 60 in each Course, then the No. of Divisions (B) = 5. For Number of Volumes and journals, this number (say, 5) has to be multiplied.
Number of Titles B1 : First Year : Only 50 number of Titles of Books for whole First yearB2 : Second Year : 25 per CourseB3 : Third Year : 25 per Course
Number of Volumes B4 : First Year : 250 x No. of Divisions (B)B5 : Second Year : 125 x No. of Divisions (B)B6 : Third Year : 125 x No. of Divisions (B)Marks should be awarded proportionate to Volume of Books available in the library
Number of Journals B7 : 3 Journal for each Division for each I, II & III year
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 9
10. EQUIPMENT
GUIDELINES FOR MARKS TO BE ALLOTTED FOR EQUIPMENT :
AVAILABILITY AND WORKING CONDITION (Maximum 5 marks) :Quantity Available No. of Equipment NOT in working conditionCalculate the ratio
Quantity Required-=
If the ratio is equal to 100%, then Marks to be allotted in Column (8) is : 5If the ratio is between 75% and < 100%, then Marks to be allotted in Column (8) is : 4³If the ratio is between 50% and < 75%, then Marks to be allotted in Column (8) is : 3³If the ratio is between 25% and < 50%, then Marks to be allotted in Column (8) is : 2³If the ratio is between 1% and < 25%, then Marks to be allotted in Column (8) is : 1³If the ratio is equal to 0%, then Marks to be allotted in Column (8) is : 0
DETAILS OF THE LABORATORIES FOR FIRST YEAR / COMMON LABORATORIES AND COURSEWISE FOR SECOND YEAR AND THIRD YEAR IS ENCLOSED AT THE END OF THE
INSPECTION REPORT.
10 (A) EQUIPMENT - SUMMARY
Maximum Marks allotted for each category : 35 Marks
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
I. FIRST YEAR AND GENERAL / COMMON LABORATORY
I (a) Ist YEAR ENGINEERING PHYSICS – I PRACTICAL 40
I (b) Ist YEAR ENGINEERING PHYSICS – II PRACTICAL 50
I (c) Ist YEAR ENGINEERING CHEMISTRY – I & II PRACTICAL 215
I (d) Ist YEAR WORKSHOP PRACTICE 180I (e) COMMON COMPUTER CENTRE 40I (f) COMMON COMMUNICATION AND LIFE
SKILL PRACTICAL 75
30
Cat. I MARKS SECURED FOR Ist YEAR/COMMON 600 30
II. CIVIL ENGINEERING
II (a) CIVIL MATERIAL TESTING LAB PRACTICE I
168II (b) CIVIL SURVEYING PRACTICE I 104II (c) CIVIL MATERIAL TESTING LAB II 260II (d) CIVIL SURVEYING PRACTICE II 20II (e) CIVIL CAD IN CIVIL ENGINEERING
DRAWING 48
30
Cat. II MARKS SECURED FOR CIVIL ENGG. 600 30
S.No Category Description of Laboratories Total Total Minimum Marks
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 10
Max. Marks
Marks Secured
Marks to be secured
Secured
III. MECHANICAL ENGINEERING
III (a) MECH MECHANICAL TESTING & QUALITY CONTROL
133
III (b) MECH FLUID POWER PRACTICAL 55
III (c) MECH COMPUTER AIDED MACHINE DRAWING
20
III (d) MECH MANUFACTURING TECHNOLOGY - I
284
III (e) MECH METROLOGY & MEASUREMENT AND MACHINE TOOL TESTING
55
III (f) MECH ELECTRICAL DRIVES AND CONTROL
53
30
Cat. III MARKS SECURED FOR MECH. ENGG. 600 30
IV. ELECTRICAL AND ELECTRONICS ENGINEERING
IV (a) EEE ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
155
IV (b) EEE ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
120
IV (c) EEE ELECTRICAL MACHINES AND INSTRUMENTATION
245
IV (d) EEE DIGITAL ELECTRONICS AND LINEAR INTEGRATED CIRCUITS
80
30
Cat. IV MARKS SECURED FOR EEE 600 30
V. ELECTRONICS AND COMMUNICATION ENGINEERING
V (a) ECE ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
120
V (b) ECE ELECTRICAL CIRCUITS AND INSTRUMENTATION
126
V (c) ECE PROGRAMMING IN C 154
V (d) ECE INDUSTRIAL ELECTRONICS AND COMMN. ENGG.
120
V (e) ECE INTEGRATED CIRCUITS PRACTICAL
80
30
Cat. V MARKS SECURED FOR ECE 600 30
S.No Category Description of Laboratories Total Max.
Total Marks
Minimum Marks to be
Marks Secured
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 11
Marks Secured secured
VI. COMPUTER ENGINEERING
VI (a) COMP ELECTRICAL AND ELECTRONICS LAB
125
VI (a) COMP LINUX PRACTICAL 167
VI (a) COMP C PROGRAMMING PRACTICAL
154
VI (a) COMP JAVA PROGRAMMING PRACTICAL
154
30
Cat. VI MARKS SECURED FOR COMP. ENGG. 600 30
VII. INFORMATION TECHNOLOGY
VII (a) IT ELECTRICAL AND ELECTRONICS LAB
125
VII (a) IT LINUX PRACTICAL 167
VII (a) IT C PROGRAMMING PRACTICAL
154
VII (a) IT JAVA PROGRAMMING PRACTICAL
154
30
Cat.VII MARKS SECURED FOR INF. TECH. 600 30
VIII. AUTOMOBILE ENGINEERING
VIII (a) AUTO MECHANICAL TESTING & QUALITY CONTROL
133
VIII (a) AUTO AUTOMOBILE CHASSIS AND TRANSMISSION
150
VIII (a) AUTO COMPUTER AIDED MACHINE DRAWING
20
VIII (a) AUTO HEAT POWER ENGINEERING PRACTICAL
152
VIII (a) AUTO INDUSTRIAL AUTOMATION PRACTICAL
145
30
Cat.VIII MARKS SECURED FOR AUTOMOBILE 600 30
S.No Category Description of Laboratories Total Max.
Total Marks
Minimum Marks to be
Marks Secured
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 12
Marks Secured secured
IX. MARINE ENGINEERING
IX (a) MARINE STRENGTH OF MATERIALS AND FLUID MECHANICS
110
IX (a) MARINE SHIP CONSTRUCTION TECHNOLOGY PRACTICAL
167
IX (a) MARINE WORKSHOP TECHNOLOGY II PRACTICAL
250
IX (a) MARINE COMPUTER AIDED MARINE ENGINEERING DRAWING
20
IX (a) MARINE ELECTRICAL DRIVES AND CONTROL
53
30
Cat. IX MARKS SECURED FOR MARINE ENGG. 600 30X MECHATRONICS
X (a) ELECTRONICS DEVICES AND CIRCUITS PRACTICAL
100
X (b) ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
100
X (c) MANUFACTURING TECHNOLOGY PRACTICAL
100
X (d) COMPUTER APPLICATIONS PRACTICAL --X (e) ANALOG AND DIGITAL ELECTRONICS
PRACTICAL100
X (f) PROGRAMMING IN C PRACTICAL 100X (g) COMMUNICATION AND LIFE SKILLS
PRACTICAL--
30
Cat.X MARKS SECURED FOR Mechatronics 500 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 13
THIRD YEAR LABORATORIES
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
I. CIVIL ENGINEERING
I (a) CIVIL CONSTRUCTION PRACTICE LAB
100
I (b) CIVIL CAD IN CIVIL ENGINEERING DRAWING II
100
I (c) CIVIL HYDRAULICS AND PLUMBING LAB
100
I (d) CIVIL COMPUTER APPLICATIONS IN CIVIL ENGINEERING
100
30
Cat. I MARKS SECURED FOR CIVIL ENGG. 30
II. MECHANICAL ENGINEERING
II (a) MECH THERMAL ENGINEERING PRACTICAL
100
II (b) MECH MANUFACTURING TECHNOLOGY II PRACTICAL
100
II (c) MECH COMPUTER INTEGRATED MANUFACTURING PRACTICAL
100
II (d) MECH PROCESS AUTOMATION PRACTICAL
100
II (e) MECH AUTOMOBILE ENGINEERING PRACTICAL
100
II (f) MECH ROBOTICS PRACTICAL 100
II (g) MECH REFRIGERATION AND AIR CONDITIONING PRACTICAL
100
30
Cat. II MARKS SECURED FOR MECH ENGG. 30III. ELECTRONICS AND COMMUNICATION AND ENGINEERING
III (a) ECE ADVANCED COMMUNICATION SYSTEMS PRACTICAL
100
III (b) ECE MICRO CONTROLLER PRACTICAL
100
III (c) ECE VERY LARGE SCALE INTEGRATION PRACTICAL
100
III (d) ECE EMBEDDED SYSTEMS PRACTICAL
100
30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 14
III (e) ECE COMPUTER HARDWARE AND NETWORKS PRACTICAL
100
III (f) ECE SIMULATION PRACTICAL 100Cat. III MARKS SECURED FOR ECE 30
IV ELECTRICAL AND ELECTRONICS ENGINEERING
IV (a) EEE ELECTRICAL CIRCUITS SIMULATION PRACTICAL
100
IV (b) EEE CONTROL OF ELECTRICAL MACHINES PRACTICAL
100
IV (c) EEE PROGRAMMABLE LOGIC CONTROLLER PRACTICAL
100
IV (d) EEE ELECTRICAL MACHINES DESIGN PRACTICAL
100
IV (e) EEE WIRING AND WINDING PRACTICAL
100
IV (f) EEE COMPUTER AIDED ELECTRICAL DRAWING
100
IV (g) EEE POWER ELECTRONICS PRACTICAL
100
IV (h) EEE BIO MEDICAL INSTRUMENTATION PRACTICAL
100
30
Cat. III MARKS SECURED FOR EEE
V COMPUTER ENGINEERING
V (a) COMPUTER
WEB PROGRAMMING PRACTICAL
100
V (b) COMPUTER
RELATIONAL DATABASE AND MANAGEMENT SYSTEMS PRACTICAL
100
V (c) COMPUTER
DOT NET PROGRAMMING PRACTICAL
100
V (d) COMPUTER
COMPUTER SERVICING AND NETWORK PRACTICAL
100
V (e) COMPUTER
SYSTEM ADMINISTRATION PRACTICAL
100
V (f) COMPUTER
MULTIMEDIA SYSTEMS PRACTICAL
100
V (g) COMPUTER
OPEN SOURCE SOFTWARE PRACTICAL
100
30
Cat. V MARKS SECURED FOR COMPUTER ENGG. 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 15
VI INFORMATION TECHNOLOGY
VI IT ADVANCED JAVA AND XML PROGRAMMING PRACTICAL
100 30
Cat. V MARKS SECURED FOR IT 30VII AUTOMOBILE ENGINEERING
VII (a) AUTO AUTOTRONICS PRACTICAL 100VII (b) AUTO AUTOMOBILE WORKSHOP
PRACTICAL100
VII (c) AUTO TWO AND THREE WHEELER TECHNOLOGY PRACTICAL
100
VII (d) AUTO TRACTOR AND FARM EQUIPMENTS PRACTICAL
100
VII (e) AUTO AERONAUTICS ENGINEERING PRACTICAL
100
30
Cat. V MARKS SECURED FOR AUTOMOBILE ENGG.
30
VIII MARINE ENGINEERINGVIII (a) MARINE MARINE DIESEL ENGINE AND
POWER PLANT PRACTICAL100
VIII (b) MARINE PERSONAL SURVIVAL TECHNIQUES PRACTICAL
100
VIII (c) MARINE SEAMANSHIP AND LIFE SAVING APPLIANCES PRACTICAL
10030
Cat. V MARKS SECURED FOR MARINE ENGG. 30IX MECHATRONICS
IX (a) MICROCONTROLLER PRACTICAL 100IX (b) HYDRAULIC, PNEUMATIC & PLC
PRACTICAL100
IX (c) CNC PRACTICAL 100IX (d) PROCESS CONTROL PRACTICAL 100IX (e) ROBOTICS & AUTO ELECTRONICS
PRACTICAL100
IX (f) CAD PRACTICAL 100
30
Cat. V MARKS SECURED FOR MECHATRONICS 600 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 16
11. ACADEMIC INFRASTRUCTURE – FIRST, SECOND AND THIRD YEAR
If there is no shortage in the required number and in the area, then the mark to be allotted for each Serial Number in the category is 01
If there is any shortage, either in the required number and / or in the area, then the mark to be allotted for each Serial Number in the category is 00
Number Details Area Details
S.No Category
Num
ber
Req
uire
d
Num
ber
Ava
ilabl
e
Shor
tage
Bui
lt-up
Are
a R
equi
red
Bui
lt-up
Are
a A
vaila
ble
Shor
tage
Max
imum
M
arks
(1 fo
r eac
h ap
plic
able
item
s)
Mar
ks S
ecur
ed
AICTE NORMS[AREA / ROOM]
1. Class Room 1 INA2. Class Room 2 INA3. Class Room 3 INA4. Class Room 4 INA5. Class Room 5 INA6. Class Room 6 INA7. Class Room 7 INA8. Class Room 8 INA9. Class Room 9 INA
10. Class Room 10 INA11. Class Room 11 INA12. Class Room 12 INA13. Class Room 13 INA14. Class Room 14 INA15. Class Room 15 INA16. INA
C = 0.75xNo. of divisions
(1 division=60)[66 sq.m/room]
17.
17.
Tutorial Room 1 INA18. Tutorial Room 2 INA19. Tutorial Room 3 INA20. Tutorial Room 4 INA
D = C / 4[33 sq.m/room]
= No. of Divisions/4
21.22. Workshop INA23. INA
[200 sq.m/ workshop]
As per AICTE norms
As per AICTE norms
[66 sq.m for each
Laboratory and 200 sq.m. for
each work shop]
As per AICTE norms
i.e.area details furnished in application uploaded in AICTE web
portal for Lab & Workshop
24. Laboratory 1 INA25. Laboratory 2 INA26. Laboratory 3 INA27. Laboratory 4 INA28. Laboratory 5 INA29. Laboratory 6 INA30. Laboratory 7 INA31. Laboratory 8 INA32. Laboratory 9 INA33. Laboratory 10 INA34. Laboratory 11 INA
As per AICTE Norms
2 Lab/ Course for I year, 2 Lab/ Course for II year, 2 Lab/ Course for III year
if additional workshop is available, Lab area may be reduced accordingly
[66 sq.m/Lab][200 sq.m/ workshop]
Area details furnished in Application uploaded ( PART 1,2& Deficiency Report) in AICTE web portal for Lab & workshop may be verified
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 17
35. Laboratory 12 INA36. Laboratory 13 INA37. Laboratory 14 INA38. Laboratory 15 INA39. Laboratory 16 INA40. Laboratory 17 INA41. Laboratory 18 INA42. Laboratory 19 INA43. Laboratory 20 INA44. Laboratory 21 INA45. Laboratory 22 INA46. Laboratory 23 INA47. Laboratory 24 INA48. Laboratory 25 INA49. Laboratory 26 INA50. Laboratory 27 INA51. Laboratory 28 INA52. Laboratory 29 INA53. Laboratory 30 INA54. INA
55. INA
56. AdditionalWorkshop 1
INA
57. AdditionalWorkshop 2
INA
58. AdditionalWorkshop 3
INA
59. AdditionalWorkshop 4
INA
60. Computer Centre
INA1 01 No.
[100 sq.m]
61. Drawing Hall INA 1 01 No.[132 sq.m]
62. Library* & Reading Room
INA 1 01 No.[300 sq.m]
63. Seminar Hall INA 1 01 No.[132 sq.m]
TOTAL
* For Library, if sanctioned intake in I or II or III year exceeds 420, Library area 50 Sq m for each additional intake of 60 beyond 420.
64. Principal Room ADA 1 01 No.[30 sq.m]
65. Board Room ADA 1 01 No.[20 sq.m]
66. College Office ADA 1 01 No.[150 sq.m]
67. Department Office
ADA1
1 for each course
[20 sq.m / Dept. office]
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 18
68. HOD Cabin
ADA1
1 for each course
[10 sq.m / HOD Cabin]
69. Faculty Room – I Year
ADA1
5 Sq.m for each First Year Faculty
=( 0.25 * I Yr Intake)
70. Faculty Room – II Year
ADA1
5 Sq.m for each Second Year
Faculty=( 0.25 * II Yr
Intake)
71. Faculty Room – III Year
ADA1
5 Sq.m for each First Year Faculty
=( 0.25 * I Yr Intake)
TOTAL
72. Central Stores AMA 1 01 No.[30 sq.m]
73. Maintenance AMA 1 01 No.[10 sq.m]
74. Security AMA 1 01 No.[10 sq.m]
75. House Keeping AMA 1 01 No.[10 sq.m]
76. Pantry for staff AMA 1 01 No.[10 sq.m]
77. Exam Office AMA 1 01 No.[30 sq.m]
78. Placement Office
AMA 1 01 No.[30 sq.m]
79. Gents Toilet AMA 1
80. Ladies Toilet AMA 1Adequate[150 sq.m]
81. Boys Common Room
AMA 1 01 No.[75 sq.m]
82. Girls Common Room
AMA 1 01 No.[75 sq.m]
83. Cafeteria AMA 1 01 No.[150 sq.m]
84. Stationary Store & Reprography
AMA 1 01 No.[10 sq.m]
85. First Aid cum Sick Room
AMA 1 01 No.[10 sq.m]
TOTAL MARKS :
Total Marks Secured for Academic Infrastructure category =TOTAL MARKS SECURED15 xTOTAL MAXIMUM MARKS
=
12. GENERAL FACILITIES - ESSENTIAL REQUIREMENTS
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 19
If the Essential requirements are available, then the mark to be allotted for each Serial Number in the category is 01
If the Essential requirements are not available, then the mark to be allotted for each Serial Number in the category is 00
S.No Description Availability
[YES / NO]If YES, then
Number AvailableMaximum
MarksMarks
Secured1. Language Laboratory 12. Water supply 13. Electric supply 14. Generator facility 15. Sewage Disposal 16. Telephone and Fax 17. First Aid facility 18. Vehicle parking 19. Institution Web-site 1
10.
Barrier Free built Environment for Differently-Abled and elderly persons including availability of specially designed toilets for ladies and gents separately.
1
11. Safety provisions including fire and other calamities 1
12. General Insurance provided for assets against fire, burglary and other calamities 1
13. All weather approach road 1
14. General Notice Board and Departmental Notice Boards 1
15. Medical and Counseling Facilities 1
ESSENTIAL IN LIBRARY
16. Digital Library facility 117. Reprographic Facility 118. Document scanning facility 119. Document printing facility 120. Internet facility in Library 121. Multimedia Facilities 122. Central Xerox Facility 1
ESSENTIAL FOR THE CONDUCT OF EXAMINATION
23. Strong Room [Storing QPs & ASs] 124. Security arrangement [Day / Night] 125. Sufficient halls for Examination 1
TOTAL MARKS : 25
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 20
Total Marks Secured for Essential General Facilities category =TOTAL MARKS SECURED10 xTOTAL MAXIMUM MARKS
=
13. GENERAL FACILITIES - DESIRED REQUIREMENTS Since, the following requirements are mentioned as desired in AICTE norms, marks need not be allotted.
S.No Description Availability[YES / NO]
Details to be provided.[Number,
if so required]REQUIREMENT
1.Public announcement system at strategic locations for general announcements / paging and announcements in emergency
DESIRED
2. Enterprise Resource Planning (ERP) Software for Student-Institution-Parent interaction DESIRED
3. Transport DESIRED
4. Post, Banking Facility / ATM DESIRED
5. CCTV Security System DESIRED6. LCD (or similar) projectors in classrooms DESIRED7. Group Insurance to be provided for the employees DESIRED8. Insurance for students DESIRED9. Staff Quarters DESIRED
10. Principal’s Quarters DESIRED[150 sq.m]
11. Guest House DESIRED[30 sq.m]
12. Sports Club / Gymnasium DESIRED[100 sq.m]
13. Auditorium / Amphi Theatre DESIRED[250 sq.m]
14. Boys Hostel DESIREDAdequate
15. Girls hostel DESIREDAdequate
14 (a) TOTAL MARKS SECURED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 21
If the Marks secured in Column (5) is less than the Minimum Marks to be secured in column (4), then indicate YES in the Deficiency column (6). Otherwise, indicate NO.
If any Course is not Offered, merge the Column (5) and (6) and indicate as NOT OFFERED.Equipment for First Year & Common Laboratories are COMPULSORY.
S.No. Parameter Maximum
MarksMinimum Marks to be secured
Marks Secured
Deficiency[YES / NO]
(1) (2) (3) (4) (5) (6)
I. EQUIPMENT : (marks to be filled only for available courses)
1. FIRST YEAR & COMMON LAB 35 302. II Year CIVIL ENGINEERING 35 303. II Year MECHANICAL ENGINEERING 35 304. II Year EEE 35 305. II Year ECE 35 306. II Year COMPUTER ENGINEERING 35 307. II Year INFORMATION TECHNOLOGY 35 308. II Year AUTOMOBILE ENGINEERING 35 309. II Year MARINE ENGINEERING 35 30
10. II Year MECHATRONICS 35 3011. III Year CIVIL ENGINEERING 35 3012. III Year MECHANICAL ENGINEERING 35 3013. III Year EEE 35 3014. III Year ECE 35 3015. III Year COMPUTER ENGINEERING 35 3016. III Year INFORMATION TECHNOLOGY 35 3017. III Year AUTOMOBILE ENGINEERING 35 3018. IIIYear MARINE ENGINEERING 35 3019. III Year MECHATRONICS 35 3020.
TOTAL MARKS SECURED 35 30
S.No. Parameter Maximum
MarksMinimum Marks to be secured
Marks Secured
Deficiency[YES / NO]
(1) (2) (3) (4) (5) (6)01. PRINCIPAL 05 0302. FACULTY & STAFF REQUIREMENTS 25 2203. LIBRARY 10 0904. EQUIPMENTS 35 3005. ACADEMIC INFRASTRUCTURE 15 1306. GENERAL ESSENTIAL FACILITIES 10 08
TOTAL MARKS SECURED 100 85
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 22
14 (b) SPECIFIC REMARKS TO BE OFFERED BY THE COMMITTEE
Adequate – Not Adequate / Deficiencies / Short comings, if any noted during the Inspection by the Committee should be stated specifically below :
1. Instructional Area :
2. Administrative Area :
3. Amenities Area :
4. Library Books and Facilities :
5. Essential Requirements :
6. Faculty and Staff Requirements :
7. EQUIPMENT :-
(a) First Year & Common Laboratories :
(b) Civil Engineering :
(c) Mechanical Engineering :
(d) Electrical and Electronics Engg. :
(e) Electronics and Communication :
(f) Computer Engineering :
(g) Information Technology :
(h) Automobile Engineering :
(i) Marine Engineering :
(j) Mechatronics :
(k) :
14 (c) COMPLAINTS ON THE INSTITUTE NOTED BY THE INSPECTION COMMITTEE
1 Non issuance of Hall Tickets to the students if any:
2 Any Complaints pending on the Institution:
3 Collection of excess fee incidences during previous years:
4 Warning/ Fines imposed during previous years:
5 Details of Legal disputes pending:
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 23
INSPECTION REPORT - SUMMARY
Date of Inspection : -- --
Time of Inspection
01. INSPECTION FEE :S.No Demand Draft No. Demand Draft Date Bank Amount
Rs.
NAME AND ADDRESS OF THE INSTITUTION
Year of Establishment :
Name of the Institution :
Address of the Institution :
04. DETAILS OF THE COURSES INSPECTED WITH SPECIFIC RECOMMENDATIONS
S.No Discipline [Course Details] General / 1st Shift Mode
Sanctioned Intake for 2016-
2017RECOMMENDED /
NOT RECOMMENDED
01. 1st SHIFT Full Time
02. 1st SHIFT Full Time
03. 1st SHIFT Full Time
04. 1st SHIFT Full Time
05. 1st SHIFT Full Time
TOTAL ANNUAL INTAKE ---
For all the Parameters … Maximum Marks
Minimum Marks
Marks Secured
Deficiency[YES / NO]
TOTAL MARKS SECURED 100 85PLEASE TICK ANY ONE AND STRIKE OUT THE ANOTHER ONE [RECOMMENDED / NOT RECOMMENDED]
RECOMMENDED NOT RECOMMENDED
SignatureName & Designation of Convenor :
Name & Designation of Member :
Name & Designation of Member :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 24
DOCUMENTS, REGISTERS AND RECORDSThe following Documents, Registers and Records should be maintained / available in the Institution and it should be produced at the time of inspection to the inspection committee members.
Sl. No. Name of Register / Record Maintained / Available
(YES / NO)1. AICTE Web-portal application uploaded Copy indicating Building area details2. AICTE Letter of Approval Copy for Institution / Programmes(s)3. Department wise faculty profile4. Department wise Non-Teaching Staff Profile5. Attendance for teaching and non-teaching staff6. Advertisement for recruitment of faculty members7. Minutes of the meeting of Staff Selection Committee8. Appointment / offer letters issued to faculty members9. Joining report of staff members
10. Copy of Regulations, curriculum and syllabi (programme wise)11. Master time table for all courses and all sections with classroom arrangements 12. Academic calendar13. Accession register for library14. Stock register for equipment and machinery15. Stock register for consumable16. Stock register for furniture17. Stock register for tools 18. Minutes of the meetings of the Governing council of the college19. Minutes of the meetings of the Regd. Society / Trust / Company of the college20. Audited statement of accounts of the college 21. Cash book of the college22. Acquittance register23. Fee receipt books (including counterfoils)24. Funds position / bank certificates / FDR copies to indicate financial stability25. Composition of the Governing council26. Composition of the Anti-Ragging Committee27. Trust Deed28. Registered Land Documents and Sale Deed29. Land Use Certificate30. Land Conversion Certificate31. Land Classification certificate32. Village Map33. Combined field map of lands34. Encumbrance Certificate for land35. Patta, Chitta and Adangal for land36. Field Measurement Book for land37. Documentary proof for ownership of lands exclusively earmarked for the College38. Approved Existing Building Plan39. Building Sketch [Complete details of Rooms, Labs, W/S, Stores, Library etc.]40. Legal Opinion41. Copy of Certificate obtained under sec. 37B of TNLRA 1961 & Form No.38
42. If Wet Land, Certificate under Section 47 (A) of Tamil Nadu Town and Country Planning Act, 1971
43. Certificates for fire/boiler/electrical safety from competent authorities.44. Certificate from Health Inspector
45. Certificate from PWD Supt. Engineer/Panel Engineer for the structural stability of the building
46. Building and equipment insurance certificate.
LIST OF ENCLOSURES TO BE ENCLOSED ALONG WITH THE INSPECTION REPORT1. Inspection Fee in the form of Demand Draft YES NO
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 25
2. AICTE Web-portal application uploaded Copy indicating Building area details YES NO3. AICTE Letter of Approval Copy for Institution / Programmes(s) YES NO4. Notarized Undertaking in Rs. 100 stamp paper YES NO5. Land Use Certificate issued by Revenue Divisional Officer YES NO6. Land Classification Certificate issued by Revenue Divisional Officer YES NO7. Land Conversion Certificate issued by Revenue Divisional Officer, if it is Wet Land YES NO8. If Wet Land, Certificate under Section 47 (A) of Tamil Nadu Town and Country
Planning Act, 1971 YES NO9. Certificate under Section 37-B on Tamil Nadu Land Reforms (Fixation of Ceiling
on land) Act 1961 (Tamil Nadu Act 58 of 1961). YES NO10. Copy of the Form No.38, viz. the application form for permission by Public Trust
under subsection (1) of Section 37-B of the Tamil Nadu Land Reforms (Fixation of Ceiling on Land) Act 1961 along with the covering letter addressed to (1) Principal Secretary to Government, Revenue Department, Chennai 9; (2) Commissioner of Land Reforms, Chepauk, Chennai 5 and (3) Assistant Commissioner (Land Reforms) or equivalent cadre under the jurisdiction where the Institution is located.
YES NO
11. Copy of the proceedings issued by DTCP for approval of building plan YES NO12. Copy of the Challan towards payment of infrastructure and basic amenities
charges to DTCP for approval of building plan YES NO13. Approved Existing Building Plan YES NO14. Trust Deed YES NO15. Registered Land Documents and Sale Deed YES NO16. Village Map YES NO17. Combined field map of lands YES NO18. Encumbrance Certificate for land YES NO19. Patta, Chitta and Adangal for land YES NO20. Field Measurement Book for land YES NO21. Documentary proof for ownership of lands exclusively earmarked for the College YES NO22. Building Sketch [Complete details of Rooms, Labs, W/S, Stores, Library etc.] YES NO23. Legal Opinion YES NO24. Certificates for fire/boiler/electrical safety from competent authorities. YES NO25. Certificate from Health Inspector YES NO26. Certificate from PWD Supt. Engineer/Panel Engineer for the structural stability
of the building YES NO27. Building and equipment insurance certificate. YES NO
Certified that1. The originals of all relevant Documents, Registers and Records as mentioned above have
been verified by us and found to be correct.2. The details regarding the six parameter viz., Principal, Faculty & Staff requirements, Library,
Equipment’s, Academic Infrastructure and General Essential Facilities have been personally verified by us and found to be correct.
3. Certified that the Deficiencies reported by the Inspection Committee during the previous year have been verified by us.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 26
10. EQUIPMENT - FIRST, SECOND AND THIRD YEAR
GUIDELINES FOR MARKS TO BE ALLOTTED FOR EQUIPMENT :
AVAILABILITY AND WORKING CONDITION (Maximum 5 marks) :Quantity Available No. of Equipment NOT in working conditionCalculate the ratio
Quantity Required-=
If the ratio is equal to 100%, then Marks to be allotted in Column (8) is : 5If the ratio is between 75% and < 100%, then Marks to be allotted in Column (8) is : 4³If the ratio is between 50% and < 75%, then Marks to be allotted in Column (8) is : 3³If the ratio is between 25% and < 50%, then Marks to be allotted in Column (8) is : 2³If the ratio is between 1% and < 25%, then Marks to be allotted in Column (8) is : 1³If the ratio is equal to 0%, then Marks to be allotted in Column (8) is : 0
I. FIRST YEAR & GENERAL / COMMON LABORATORIES [COMMON FOR ALL BRANCHES]
I. (a) FIRST SEMESTER – ENGINEERING PHYSICS – I PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. MICROMETER (SCREW
GAUGE) SETUP - Screw gauge, graph sheet and irregular glass plate.
4 SETS
5
2. VERNIER CALIPERS SETUP - Vernier Calipers and Solid Cylinder
4 SETS
5
3. CONCURRENT FORCES SETUP - Vertical drawing board, two Z pulleys, three sets of slotted weights (5 x 50g) and twine thread
4 SETS
5
4. POISEUILLE’S METHOD SETUP - Burette stand, graduated burette without stopper, rubber tube, beaker, capillary Tube, digital stop watch and funnel.
4 SETS
5
5. STOKES’ METHOD SETUP – Stokes Apparatus, high viscous liquid (Castrol oil), glass beads of Different radii, digital stop watch
4 SETS
5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 27
and screw gauge6. SURFACE TENSION SETUP -
Beaker with water, capillary tube, iron stand with clamp, pointer, travelling microscope and hydro static bench.
4 SETS
5
7. SONOMETER SETUP - Sonometer, screw gauge, tuning fork, rubber hammer, slotted weight hanger set (5 x 0.5kg) and paper rider
4 SETS
5
8. DEFLECTION MAGNETOMETER SETUP - Deflection Magnetometer, meter scale and two bar magnets
4 SETS
5
TOTAL MARKS -- -- -- -- 40
I. (b) SECOND SEMESTER – ENGINEERING PHYSICS – II PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. REFRACTIVE INDEX SETUP -
Travelling Microscope, Beaker with transparent liquid & Saw dust
4 SETS
5
2. SPECTROMETER. SETUP - Spectrometer, Sodium vapour lamp, Reading lens and Glass prism
4 SETS
5
3. SOLAR CELL SETUP - Solar cell Kit for drawing the V - I characteristics
4 SETS
5
4. LAWS OF RESISTANCES - Battery Eliminator, key, rheostat, ammeter, voltmeter, Connecting wires and two known standard resistances
4 SETS
5
5. METRE BRIDGE SETUP - Meter Bridge, variable resistance box, Leclanche cell, plug Key, galvanometer, high resistance, jockey, connecting Wires and unknown resistance
4 SETS
5
6. POTENTIOMETER SETUP - 4 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 28
Potentiometer, two cells (Leclanche cell and Daniel cell), Battery eliminator, Rheostat, Key, two way key,Galvanometer, high resistance, jockey and connecting wires
SETS
7. JOULE’S CALORIMETER SETUP - Joule’s Calorimeter, Battery eliminator, Rheostat, Key, Ammeter, voltmeter, stop clock, thermometer, digital Balance and connecting wires
4 SETS
5
8. COPPER VOLTAMETER SETUP - Copper Voltameter, Battery eliminator, Rheostat, Key, Ammeter, stop clock, digital balance, emery sheet and Connecting wires
4 SETS
5
9. P-N JUNCTION DIODE SETUP - P-N Junction Diode forward characteristics kit
4 SETS
5
10. LOGIC GATES SETUP - Logic gates testing apparatus kit with bread board for Mounting ICs and Integrated circuit chips ( IC 7404 – NOT Gate, IC 7408 – AND Gate, IC 7432 – OR gate, IC 7400 – NAND Gate, IC 7402 – NOR Gate)
4 SETS
5
TOTAL MARKS -- -- -- 50
I. (c) I & II SEMESTER – ENGINEERING CHEMISTRY – I & II PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Non-Consumable Items:
1. Indane gas Connection (DBC) 1 52. Exhaust Fan (High capacity) 1 53. Fire Extinguisher 1 54. First Aid Box (Full set) 2 55. Safety chart 1 56. Chemical Balance 1 57. Fractional weight box 1 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 29
8. PH meters 5 59. Working Table with accessories 8 5
Glassware and Other Items :1. Burette 50ml 35 52. Pipette 20ml (with safety bulb) 35 53. Conical Flask 250ml 35 54. Funnel 3” (Polythene) 50 55. Porcelain Tile 6x6” 35 56. Measuring Cylinder 100ml 5 57. Measuring Cylinder 500ml 3 58. Reagent Bottle (White) 250ml 60 59. Reagent Bottle (White) 125ml 100 5
10. Reagent Bottle (Amber) 250ml 80 511. Test tubes 15 x 1.5 mm 1000 512. Test tubes 15 x 2.5 mm 500 513. Test tube stand 35 514. Test tube holder 35 515. Test tube cleaning brush 35 516. Glass Trough 5 517. Beakers 1000 ml 5 518. Beakers 500 ml 5 519. Beakers 250 ml 35 520. Beakers 100 ml 5 521. Glass Rods 15cm 100 522. Watch Glass 3” 35 523. Wash Bottle (Polythene) 1000 ml 35 524. Nickel Spatula 10 525. Kipps Apparatus 1 526. Burner Nipple 30 527. Bunsen Burner for gas connection 30 528. Wire Gauge with asbestos center 15 529. Plastic Buckets (15 lts) 10 530. Tripod Stand (Iron) 30 531. Filter Paper Round sheets 1000 532. Burette stand 35 533. Standard flask 100 ml 35 534. Pipette 10ml 5 5
TOTAL MARKS -- -- -- -- 215
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 30
I. (d) SECOND SEMESTER – WORKSHOP PRACTICE [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)FITTING SECTION :
1. 4” Bench vice 30 52. 12” Flat Rough file 30 53. 12” Flat smooth file 30 54. 10” Try angular file 30 55. 8” Half round file 30 56. 8” Square file 30 57. 10” Round file 30 58. 150 mm Try square 30 59. 150 mm Steel rule 30 5
10. 6 mm Dot punch 30 511. 6 mm Center punch 30 512. Hacksaw Frame 30 513. 6” leg vice 5 514. 6 mm Prick punch 5 515. Hand shearing machine 1 516. Ball Pan ½ lbs Hammer 30 517. 6.8 mm Drill Bit 5 518. 8.5 mm Drill Bit 5 519. 10.2 mm Drill Bit 5 520. M8 tap set 5 521. M10 tap set 5 522. M12 tap set 5 523. Bench drilling machine 5 524. Deep cut Hacksaw frame 5 525. 2’ x 1 ½’ Surface plate 2 526. Scriber 30 527. Tap wrench 10 5WIRING SECTION
1. 6” Insulated handle cutting pliers 30 52. 8” Insulated handle screw driver 30 53. ¼ Pound hammer 30 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 31
4. Wire Cutter 30 55. 250V Line Tester 30 56. 10 cm Poker 30 57. 4” Connecting Screw driver 30 58. 2 x 1½ Wiring board 30 59. Multi meter 5 5
TOTAL MARKS -- -- -- -- 180
GENERAL [COMMON LABORATORIES]
I. (e) COMPUTER CENTRE - COMPUTERS, SOFTWARE, INTERNET AND PRINTERS
FOR COMPUTER APPLICATIONS PRACTICAL, COMPUTER CENTRE FACILITIES CAN BE UTILISED
S.No Computer Facilities
Req
uire
d
Ava
ilabl
e
Shor
tfall
Max
imum
M
arks
Secured MarksMax.Marks x Available
Requiredé ùê úë û
AICTE NORMS
1. Computers [S] - 10Total Sanctioned intake ÷ 6
[One Computer for every 6 students]
2.
Multimedia Computers – Library / Internet Surfing in Reading room
02 1% of Total Students Intake[Max. 10]
3.Computers -For Faculty Members 02
4.Computers -For Administrative Office
02
Exclusive - along with LAN and Internet over and above the
requirement meant for students
5. Printers [P] 05 One Printer for every 10 required number of computers
6. Internet Facility 05£ => =
S.I. 240 1MbpsS.I. 240 2 Mbps
S.I. – Sanctioned Intake7. LAN Facility 05 All
8. Legal System Software 02 03
9.
Legal Application Software including MS Office / Open Office
05 20
10. UPS – 10 KVA 02 01
TOTAL MARKS : 40
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 32
I. (f) GENERAL [COMMON] – COMMUNICATION AND LIFE SKILL PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. An echo-free room 1 No. --- -- -- --2. Furniture / Chairs 30 103. Public Address System 1 No. 104. A minimum of two Computers
with internet access, with Audio for Listening Skill and related software packages
2 Nos 10
5. Headphone units – 30 Nos. with one control unit with a facility to play and record in Computer
As reqd.
10
6. Minimum of Three Mikes with and without cords
3+3 nos
06
7. Colour TV (min.size – 29”). 1 No. 058. DVD/VCD Player with Home
Theatre speakers1 set 05
9. Clip Chart, white/smart board 1 each
04
10. Projector. 1 No. 0211. Video camera 1 No. 0212. Printer, Xerox, scanner m/c 1
each06
13. English Dailies / Weeklies / monthlies / journals like ELTOI
Adeq. 03
14. Frozen thoughts –monthly journal for Life skills by Mr.Rangarajan
Adeq. 02
TOTAL MARKS: -- -- -- -- 75
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 33
I. CIVIL ENGINEERINGII (a). CIVIL - THIRD SEMESTER – MATERIAL TESTING LAB PRACTICE I
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Universal Testing Machine (20 to
40 t capacity) 1 No. 10
2. Compression Testing M/C. (50 to 100 t capacity)
1 No. 10
3. Torsion Testing Machine (To test mild steel bars of 12 to 16mm dia)
1 No. 10
4. Brinell Hardness Testing m/c 1 No. 105. Rockwell’s Hardness Testing M/C 1 No. 106. Izod/Charpy Impact Testing
Machine 1 No. 10
7. Tile Flexure Testing Machine 1 No. 108. Deflection Test Apparatus with
Deflectometer 1 No. 10
9. Blaine Air Permeability Apparatus 1 No. 1010. Vicat Apparatus with accessories
(moulds, plunger, needles) 2 No. 20
11. Cement Autoclave Apparatus with accessories
1 No. 10
12. Water measuring jars 4 No. 413. Stop Watches 4 No. 414. Vernier Calipers 4 No. 415. Steel Scales- 1 metre length 4 No. 416. Steel Scales- 30 or 50 cm length 4 No. 417. Dial Gauges/ Compresso meter
with stands 2 No. 2
18. Electronic Weighing Balances (5kg)
2 No. 2
19. Electric Oven/ Hot Plate 1 No. 220. Trowels of different sizes 4 No. 421. Steel Trays / Pans 4 No. 422. Steel Buckets / Containers 2 No. 223. Steel/ Plastic Mugs 2 No. 224. China Clay Discs 4 No. 425. Steel Hammer / Steel Punch 1 Set 226. Extenso meter/Strain Gauge 1 No. 227. Strain Recording Instrument 1 No. 2
TOTAL MARKS: -- -- -- -- 168
II (b). CIVIL - THIRD SEMESTER – SURVEYING PRACTICE I
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 34
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Chain with arrows 6 No. 122. Tape 6 No. 123. Ranging rod 6 No. 124. Cross – Staff 6 No. 125. Prismatic Compass 6 No. 126. Dumpy Level 10 No. 107. Levelling Staff 10 No. 108. Hand held GPS 6 No. 24
TOTAL MARKS: -- -- -- -- 104
II. (c). CIVIL - FOURTH SEMESTER – MATERIAL TESTING LAB II
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Deval’s Attrition Testing m/c 1 No. 102. Dorry’s Abrasion Testing m/c 1 No. 103. Aggregate Impact Testing
Machine 1 No. 10
4. Compression Testing Machine (Available in M.T.Lab I may be used)
1 No. 10
5. I.S.Sieves (All sizes) as per the test requirements of I S code
1 Set 02
6. Pycnometer 2 No. 107. Standard Liquid Limit Apparatus 1 No. 10
8. Sand Pouring Cylinder 1 No. 109. Cylindrical Core Cutter 1 No. 10
10. Proctor Compaction Apparatus with accessories
1 No. 10
11. Direct Shear Apparatus with Shear Box assembly
1 No. 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 35
12. Jackson Candle Turbidity meter with Candle
1 No. 10
13. Imhoff Cone Apparatus 1 No. 1014. Weighing M/C. (50/100kg) 1 No. 1015. Digital Balances (5/10 kg) 4 No. 0816. Electric Oven / Hot Plate 1 No. 1017. Water measuring jars 6 No. 1218. Water Bath 1 No. 1019. Stop Watches 4 No. 0820. Steel Trays / Pans 6 No. 1221. Steel Buckets 4 No. 0822. Cylindrical Steel Containers (2 or
3 Litres) 2 No. 04
23. Trowels of different sizes 6 No. 1224. Steel Scales (50cm/30cm) 4 No. 0825. Glass plates 6 No. 1226. China Clay Discs 6 No. 1227. Steel / Plastic Mugs 6 No. 12
TOTAL MARKS: -- -- -- -- 260
II. (d). CIVIL - FOURTH SEMESTER – SURVEYING PRACTICE II
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
1. Vernier Theodolite 10 Nos 102. Total Station 3 Nos 10
TOTAL MARKS: -- -- -- -- 20
II (e). CIVIL - FOURTH SEMESTER – CAD IN CIVIL ENGINEERING DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 36
(1) (2) (3) (4) (5) (6) (7) (8)1. Software – [like AutoCAD] 30 license 102. Desktop Computer System
with latest configuration30 Nos 20
3. Power Backup (UPS) 10 KVA 104. Laser Printer 2 Nos 08
TOTAL MARKS: -- -- -- -- 48
II (f). CIVIL - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 37
III. MECHANICAL ENGINEERING
III (a). MECHANICAL - THIRD SEMESTER - MECHANICAL TESTING & QUALITY CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. UTM 1 102. Rockwell’s Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing
arrangement1 10
5. Impact testing machine 1 106. Tension testing
arrangements1 05
7. Shear testing machine 1 058. Vernier calliper 2 059. Metallurgical Microscope 6 0610. Sample Specimen for
ferrous & non- ferrous (Identification)
6 EACH 12
11. For LPTa) Dieb) Cleanerc) Developer
2 no’s4 no’s4 no’s
040808
12. Magnetic particle test equipment
2 no’s 10
13. Belt polishing machine 1 0514. Lapping machine 1 0515. Sample Specimen 10 no’s 10
TOTAL MARKS: -- -- -- -- 133
III (b). MECHANICAL - THIRD SEMESTER – FLUID POWER PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. The Bernoulli’s Apparatus 1 no. 052. An Open tank fitted with a
samlla orifice (or) an 1 no. 05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 38
external mouth piece and a collecting tank with Piezometer
3. A Centrifugal pump having the discharge line with venturimeter or orifice meter arrangement
1 no. 05
4. An arrangement to find friction factor
1 no. 05
5. A reciprocating pump with an arrangement for collecting data to find out the efficiency and plot the characteristics curves
1 no. 05
6. A centrifugal pump with an arrangement for collecting tank to find out the efficiency and plot the characteristics curves
1 no. 05
7. A impulse turbine with an arrangement for calculating data to find out the efficiency – Francis or Kalpan
1 no. 05
8. A reaction turbine with an arrangement for collecting data to find out the efficiency
1 no. 05
9. Pneumatic Trainer Kit 2 no’s 1010. Hydraulics Trainer Kit 1 no. 05
TOTAL MARKS: -- -- -- -- 55
III (c). MECHANICAL - FOURTH SEMESTER – COMPUTER AIDED MACHINE DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
1. Personal computer (With latest processor to suit Auto CAD)
30 Nos 10
2. MS Windows OS 30 License
05
3. AutoCAD software (release 2000 or above)
30 users 05
TOTAL MARKS: -- -- -- -- 20
III (d). MECHANICAL - FOURTH SEMESTER – MANUFACTURING TECHNOLOGY - I
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 39
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)TURNING
1. Center Lathe 4 ½ ‘ Bed length
15 no’s 30
2. 4 Jaw / 3 Jaw Chucks Adequate 043. Chuck key (10x10 mm size) 15 no’s 054. Box spanner 15 no’s 055. Cutting Tool H.S.S ¼ ‘’ x ¼ ‘’
x 4 ‘’ long15 no’s 05
6. Pitch gauge 5 no’s 057. Vernier Caliper (0-25 and
25-50)5 no’s each
10
8. Micrometer, Inside and Outside(0-25 and 25-50)
5 each 10
9. Vernier Height Gauge (300mm)
1 no 05
10. Snap gauge 1 set 0511. Gear tooth Vernier 1 no 0512. Parallel Block 2 nos 0513. Steel Rule (0-150) 15 nos 0514. Outside and Inside Calipers 15 each 0515. Thread gauge 5 nos 0516. Bevel Protractor 1no 0517. Jenny Caliper 5 nos 0518. Dial Gauge with Magnetic
Stand 5 nos 05
19. Marking Gauge 10 nos 0520. Safety Glass 15 nos 05
WELDING1. Arc welding booth, with oil /
air cooled welding transformer with accessories
2 No’s 10
2. Gas welding unit (Oxygen and acetylene cylinder)
1 set 05
3. Flux 500 gms 024. Electrode 10 SWG 200 no’s 105. Face shield 3 no’s 036. Gas welding goggles 2 no’s 027. Leather Glows 18’’ 4 set 048. Flux chipping hammer 4 no’s 049. Spot welding machine 1 no 05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 40
FOUNDRY1. Crucible furnace 1 no 052. Tilting furnace 1 no 053. Shovel 20 nos 054. Rammer set 30 nos 055. Slick 30 nos 056. Strike-off bar 30 nos 057. Riddle 15 nos 058. Trowl 30 nos 059. Lifter 30 nos 05
10. Sprue pin 60 nos 0511. Brush 20 nos 0512. Vent rod 30 nos 0513. Draw spike 30 nos 0514. Gate cutter 30 nos 0515. Cope box 30 nos 0516. Drag box 30 nos 0517. Core box 10 nos 0518. Runner & riser 60 nos 0519. Moulding board 30 nos 0520. Patterns 15 each 05
TOTAL MARKS: -- -- -- -- 284
III (e). MECH. - IV SEM. – METROLOGY & MEASUREMENT AND MACHINE TOOL TESTING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Vernier caliper 0.02mm
accuracy6 06
2. Micrometer 0.01mm accuracy
3 03
3. Vernier Height gauge 0.02mm accuracy
1 05
4. Sine Bar 2 025. Slip Gauge 2 026. Inside Micrometer 0.01mm
accuracy3 03
7. Bevel protractor 2 028. Gear Tooth Vernier caliper 2 029. Thread Micrometer 0.01mm
accuracy2 02
10. Pitch gauge mm & inch set 2 each 0411. Digital Micrometer 0.001mm
accuracy2 02
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 41
12. Vernier Depth gauge 2 0213. Sample Specimen as
required -- -- -- --
14. Magnetic stand with dial indicator
6 06
15. Straight edge 2 0416. Squares 2 0417. Split level 6 0618. Test Mandrels for each
machinesAdeq. -- -- -- --
TOTAL MARKS: -- -- -- -- 55
III (f). MECHANICAL - FOURTH SEMESTER – ELECTRICAL DRIVES AND CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)ELECTRICAL LAB
1. DC ammeter 0-5A 1 no 012. DC ammeter 0-25A 1 no 013. DC voltmeter 0-30V 1 no 014. DC voltmeter 0-300V 1 no 015. Rheostat 10.8 ,8.5A 1 no 016. AC ammeter 0-5A 1 no 017. AC ammeter 0-10A 2 nos 028. AC voltmeter 0-50V 3 nos 039. AC wattmeter 5A-10A (0-
750W, 0-600V) 3 nos 03
10. Loading rheostat 5A,230V 1 no 0111. Tachometer (Analog Type)
0-1000 rpm1 no 01
12. Variac (Auto Transformer) 20A, 250V
2 nos 02
13. 3 point starter 20A, 220V 1 no 0114. Dol starter 16A, 415V 1 no 0115. Star /Delta starter 20A,600V 1 no 0116. Over load relay 1 to 2.5A 1 no 0117. Air break contactors 20A, 220V 4 nos 0418. Push button 2A ,220V 2 nos 0219. Limit switch 20A,220V 1 no 01
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 42
20. MCB 20A single pole 1 no 0121. MCB 20A double pole 1 no 0122. ELCB 2pole 20A,100mA 1 no 0123. ELCB 4POLE 20A,100mA 1 no 01
ELECTRONICS LAB1. Transformer 230/ 9-0-9V, 1A 4 nos 042. Resistor 1 K/ ½ W 3 nos 033. Capacitor 1000 F/25V 4 nos 044. IC 7805 1 no 015. Logic Gates IC 7400, 7408,
7432, 7404, 7402, 7486each 1 no 01
6. Stepper Motor Drive kit 1 no 017. Servo Motor Drive Kit 1 no 018. SMPS Trainer Kit 1 no 019. UPS Trainer Kit 1 no 01
10. Inverter Kit 1 no 0111. Digital Multimeter 1 no 0112. LED 7 Segment Laser Diode 1 each 01
TOTAL MARKS: -- -- -- -- 53
III (g). MECHANICAL - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 43
IV. ELECTRICAL AND ELECTRONICS ENGINEERING
IV (a). EEE - THIRD SEMESTER – ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Shunt Motor 3 / 5 KW
(or more) with loading arrangement
1 05
2. DC Series Motor 3 / 5 KW (or more) with loading arrangement
1 05
3. DC Compound Motor 3 / 5 KW (or more) with loading arrangement
1 05
4. DC Shunt Generator 3 / 5 KW (or more) coupled with Prime Mover
1 05
5. DC Series Generator 3 / 5 KW (or more) coupled with Prime Mover
1 05
6. 1 phase Transformer 1KVA (or more) 220V/110V
3 15
7. 3 phase Transformer 1 KVA (or more) 440V/220V
1 06
8. 1 phase Variac 15 Amps 3 159. 3 phase Variac 15 Amps 1 06
10. Loading Rheostat 220V, 30A, Single phase loading Rheostat
2 10
11. Tachometer Analog type 2 1012. Tachometer Digital 1 0613. 3 point / 4 point starter 6 1214. Rheostat – various ranges
50Ω-100Ω,1300Ω-600Ω10 10
15. DC Ammeter- various ranger 0-1,0-2,0-15,0-30 Amps
10 10
16. DC Voltmeter- various ranges 0-75V,0-150V, 0-300V,0-600V
10 10
17. Wattmeter-various ranges LPF 75/150/300/600 Volts
2 10
18. Wattmeter-various ranges UPF 75/150/300/600 Volts
2 10
TOTAL MARKS: -- -- -- -- 155
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 44
IV (b). EEE - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Regulated power supply
(0-30V, 1A)10 20
2. High Voltage Power Supply (0-250V, 1A)
2 10
3. Signal Generator (1MHz) 4 204. Dual trace CRO (20 MHz /
30MHz)5 30
5. Digital Multi meter 10 106. DC Voltmeter (Analog)
(Different Range)15 15
7. DC Ammeter (Analog) (Different Range)
15 15
TOTAL MARKS: -- -- -- -- 120
IV (c). EEE - FOURTH SEMESTER – ELECTRICAL MACHINES AND INSTRUMENTATION
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Synchronous Motor 3 / 5 HP
(or more)1 05
2. 3 Phase Squirrel cage Induction motor 5 HP 440V/20A
1 05
3. 1 phase Induction motor 1 HP 230V/0.5A
1 10
4. 3 phase Slip ring Induction motor 5HP 440V/20A
1 10
5. AC Ammeter (0-2)A 2 106. AC Ammeter (0-15)A 2 107. AC Ammeter (0-10)A 2 108. AC Ammeter (0-5)A 5 109. DC Ammeter (0-2)A 3 06
10. AC Voltmeter (0-300)V 3 06
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 45
11. AC Voltmeter(0-600)V 6 1212. Wattmeter (0-24)V,5A,10A 3 0613. Wattmeter (0-60)V,5A,10A 7 1414. Wattmeter (0-750)W
wattmeter multi range 1500W-10A,3000W-
1 05
15. Wheatstone bridge 2 1016. Anderson Bridge 2 1017. Schering Bridge 2 1018. 1 Phase Energy meter
Calibration Induction Type1 05
19. 3 Phase Energy meter Calibration Induction Type
1 05
20. Earth Resistance Kit 2 1021. LVDT Kit to measure
Displacement2 10
22. Load Cell calibration various Load arrangement
2 10
23. Alternator 1 phase 1 0524. Alternator 3 phase 1 0525. Tachometer Analog type 2 1026. Tachometer Digital 1 0127. Synchroscope 1 0528. Frequency meter 2 1029. PF meter (paver factor
meter)2 10
30. Single phase R.S.S meter 1 0431. 3 phase R.S.S meter 1 06
TOTAL MARKS: -- -- -- -- 245
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 46
IV (d). EEE - IV SEMESTER - DIGITAL ELECTRONICS AND LINEAR INTEGRATED CIRCUITS
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC trainer Kits 10 302. Function Generator 2 203. 0-30V power supply 2 104. 20MHz CRO 2 20
TOTAL MARKS: -- -- -- -- 80
IV (e). EEE - THIRD SEMESTER – WORKSHOP PRACTICAL
LATHE AND WELDINGMECHANICAL – MANUFACTURING TECHNOLOGY – I CAN BE UTILISED
IV (f). EEE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
IV (g). EEE - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL PRACTICAL
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 47
V. ELECTRONICS AND COMMUNICATION ENGINEERING
V (a). ECE - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
S.No List of Equipment
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Regulated power supply (0-
30V, 1A)10 20
2. High Voltage Power Supply (0-250V, 1A)
2 10
3. Signal Generator (1MHz) 4 204. Dual trace CRO (20 MHz/ 30MHz) 5 305. Digital Multi meter 10 106. DC Voltmeter (Analog)(Diff.Range) 15 157. DC Ammeter (Analog) (Diff.Range) 15 15
TOTAL MARKS: -- -- -- -- 120
V (b). ECE - THIRD SEMESTER – ELECTRICAL CIRCUITS AND INSTRUMENTATION
S.No List of Equipment
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)1. Regulated power supply (0-30V, 1A) 8 242. Dual trace CRO (20MHz) 4 123. Signal Generator (1MHz) 3 094. Voltmeter (0 – 15 volts) 8 245. Ammeter (0 – 15 mA) 6 186. Digital Multi meter 4 127. Ammeter (0 – 100 mA) 8 248. Galvanometer 1 029. Decade resistance box 1 01
TOTAL MARKS: -- -- -- -- 126
V (c). ECE - THIRD SEMESTER – PROGRAMMING IN C
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 48
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 nos 1082. Laser Printer 4 nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
V (d). ECE - IV SEMESTER – INDUSTRIAL ELECTRONICS AND COMMUNICATION ENGG.
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Regulated power supply (0-30V) 5 402. Dual trace CRO 2 163. Signal Generator 2 164. PAM Kit 1 085. PWM Kit 1 086. PPM Kit 1 087. PCM Kit 1 088. PLC 2 16
TOTAL MARKS: -- -- -- -- 120
V (e). ECE - FOURTH SEMESTER – INTEGRATED CIRCUITS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC trainer Kits 10 302. Function Generator 2 20
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 49
3. 0-30V power supply 2 104. 20MHz CRO 2 20
TOTAL MARKS: -- -- -- -- 80
V (f). ECE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
V (g). ECE - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL PRACTICAL
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 50
VI. COMPUTER ENGINEERING
VI (a). COMPUTER ENGG. - THIRD SEMESTER – ELECTRICAL AND ELECTRONICS LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Digital Multimeter 6 122. Ammeter (0-50) mA 6 123. Voltmeter (0-20) V, (0-1v) 6 + 6 124. Power supply 0-30V 6 125. Digital Trainer Kit 6 126. Bread Board 6 127. Fixed Dual Power Supply
0-15 V2 04
8. Signal generator 1 MHz 2 049. CRO Dual Trace 30 MHz 6 12
10. Single Phase Transformer 2 04
COMPONENTSResistors (150Ω, 1KΩ, 2.2KΩ, 10KΩ, 2 20Ω)
Adeq. 10
Capacitor (10µF, 4.7µF) Adeq. 02PN Diode (IN4007) Adeq. 02Zener Diode (Z11.1) Adeq. 02Transistor (SL100, CL100) Adeq. 02IC7400, IC7402, IC7404, IC7408, IC7432, IC7486
Adeq. 06
IC74161 (Counter) Adeq. 01IC74153 (MUX) Adeq. 01IC74139 (DMUX) Adeq. 01IC7476 (Flip-Flop) Adeq. 01IC74194 (Shift Register) Adeq. 01
TOTAL MARKS: -- -- -- -- 125
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 51
VI (b). COMPUTER ENGG. – THIRD SEMESTER – LINUX PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Server [LINUX] 1 No. 152. Desktop Computers 36 Nos 1083. Laser Printer 4 Nos 164. LINUX Server OS 1 no 105. Linux Client OS 36 Nos 18
TOTAL MARKS: -- -- -- -- 167
VI (c). COMPUTER ENGG. – THIRD SEMESTER – C PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
VI (d). COMPUTER ENGG. – FOURTH SEMESTER – JAVA PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. JDK 1.3 or JDK 1.4 36 Nos 30
TOTAL MARKS: -- -- -- -- 154
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 52
VI (e). COMPUTER ENGG. – THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VI (f). COMPUTER ENGG. – FOURTH SEMESTER – DATA STRUCTURES USING C LAB
COMPUTER ENGG. – THIRD SEMESTER – C PROGRAMMING PRACTICAL CAN BE UTILISED
VI (g). COMPUTER ENGG. – FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL LAB
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 53
VII. INFORMATION TECHNOLOGY
VII (a). IT - THIRD SEMESTER – ELECTRICAL AND ELECTRONICS LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Digital Multimeter 6 122. Ammeter (0-50) mA 6 123. Voltmeter (0-20) V, (0-1v) 6 + 6 124. Power supply 0-30V 6 125. Digital Trainer Kit 6 126. Bread Board 6 127. Fixed Dual Power Supply
0-15 V2 04
8. Signal generator 1 MHz 2 049. CRO Dual Trace 30 MHz 6 12
10. Single Phase Transformer 2 04
COMPONENTSResistors (150Ω, 1KΩ, 2.2KΩ, 10KΩ, 2 20Ω)
Adeq. 10
Capacitor (10µF, 4.7µF) Adeq. 02
PN Diode (IN4007) Adeq. 02
Zener Diode (Z11.1) Adeq. 02
Transistor (SL100, CL100) Adeq. 02
IC7400, IC7402, IC7404, IC7408, IC7432, IC7486
Adeq. 06
IC74161 (Counter) Adeq. 01
IC74153 (MUX) Adeq. 01
IC74139 (DMUX) Adeq. 01
IC7476 (Flip-Flop) Adeq. 01
IC74194 (Shift Register) Adeq. 01
TOTAL MARKS: -- -- -- -- 125
VII (b). IT – THIRD SEMESTER – LINUX PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 54
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Server [LINUX] 1 No. 152. Desktop Computers 36 Nos 1083. Laser Printer 4 Nos 164. LINUX Server OS 1 no 105. Linux Client OS 36 Nos 18
TOTAL MARKS: -- -- -- -- 167
VII (c). IT – THIRD SEMESTER – C PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
VII (d). IT – FOURTH SEMESTER – JAVA PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. JDK 1.3 or JDK 1.4 36 Nos 30
TOTAL MARKS: -- -- -- -- 154
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 55
VII (e). IT – THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VII (f). IT – FOURTH SEMESTER – DATA STRUCTURES USING C LAB
IT – THIRD SEMESTER – C PROGRAMMING PRACTICAL CAN BE UTILISED
VII (g). IT – FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL LAB
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 56
VIII. AUTOMOBILE ENGINEERING
VIII (a). AUTOMOBILE - THIRD SEMESTER – MECHANICAL TESTING & QUALITY CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. UTM 1 102. Rockwell’s Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing
arrangement1 10
5. Impact testing machine 1 106. Tension testing
arrangements1 05
7. Shear testing machine 1 058. Vernier calliper 2 059. Metallurgical Microscope 6 06
10. Sample Specimen for ferrous & non- ferrous (Identification)
6 EACH12
11. For LPTa) Dieb) Cleanerc) Developer
2 no’s4 no’s4 no’s
040808
12. Magnetic particle test equipment
2 no’s 10
13. Belt polishing machine 1 0514. Lapping machine 1 0515. Sample Specimen 10 no’s 10
TOTAL MARKS: -- -- -- -- 133
VIII (b). AUTOMOBILE - THIRD SEMESTER – AUTOMOBILE CHASSIS AND TRANSMISSION
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 57
1. Valcanizing kit 2 nos 202. Four Wheel alignment kit 1 no 103. Wheel balancing device 1 no 104. Mechanical / Hydraulic
Press1 no 10
5. Hydraulic brake system fixed in the frame
1 no 10
6. Screw jack / Hydraulic jack 2 nos 207. Hoist 2 nos 208. Trolley 2 nos 209. Spanners & Tools 6 sets 30
TOTAL MARKS: -- -- -- -- 150
VIII (c). AUTOMOBILE - FOURTH SEMESTER – COMPUTER AIDED MACHINE DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer (With latest
processor to suit Auto CAD)30 Nos 10
2. MS Windows OS 30 Nos 053. AutoCAD software (release
2000 or above)30 users 05
TOTAL MARKS: -- -- -- -- 20
VIII (d). AUTOMOBILE - FOURTH SEMESTER – HEAT POWER ENGINEERING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Model for Port timing diagram /
Valve timing diagramEach 1
no20
2. Open cup apparatus and Closed cup apparatus
Each 1 no
20
3. Say bolt viscometer 1 no 104. Red wood viscometer 1 no 105. Bomb Calorimeter 1 no 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 58
6. Petrol engine test rig to conduct load test
1 no 20
7. Diesel engine test rig to conduct load test
1 no 20
8. Multi cylinder Petrol or Diesel engine.
1 no 20
9. Petrol / Diesel Engine test rig to find heat balance sheet.
1 no 10
10. Exhaust gas analyzer. 1 no 0611. Smoke meter. 1 no 06
TOTAL MARKS: -- -- -- -- 152
VIII (e). AUTOMOBILE - FOURTH SEMESTER – INDUSTRIAL AUTOMATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Pneumatic trainer kit 2 nos 402. Air compressor 1 no 103. Hydraulic trainer kit with
hydraulic power pack2 nos 40
4. Programmable logic controller
2 nos 40
5. Boards to fix the component Min. 6 nos 066. Sufficient Pneumatic and
Hydraulic components.Adeq. 09
TOTAL MARKS: -- -- -- -- 145
VIII (f). AUTOMOBILE -THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VIII (g). AUTOMOBILE - FOURTH SEMESTER – MANUFACTURING TECHNOLOGY - I LAB
MECHANICAL – IV SEM. – MANUFACTURING TECHNOLOGY-I CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 59
IX. MARINE ENGINEERING
IX (a). MARINE - THIRD SEMESTER – STRENGTH OF MATERIALS AND FLUID MECHANICS
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Universal Testing Machine 1 102. Brinell Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing arrangement 1 105. Tension testing arrangements 1 106. Impact testing machine 1 107. Shear testing machine 1 108. The Bernoulli’s Apparatus 1 059. Venturimeter / Orifice meter
arrangement1 05
10. An arrangement to find friction factor
1 05
11. Reciprocating pump 1 0512. Centrifugal pump 1 0513. Impulse turbine 1 0514. An open tank fitted with a
orifice / an external mouthpiece and a collecting tank with Piezometer
1 05
15. Either Pneumatic trainer kit with air compressor (or) Hydraulic trainer kit with hydraulic power pack
1 05
TOTAL MARKS: -- -- -- -- 110
IX (b). MARINE - THIRD SEMESTER – SHIP CONSTRUCTION TECHNOLOGY PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. 300 Amps welding transformer
with accessories 2 100
2. Sheet bending machine 1 343. Sheet cutting machine 1 33
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 60
TOTAL MARKS: -- -- -- -- 167
IX (c). MARINE - FOURTH SEMESTER – WORKSHOP TECHNOLOGY II PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Surface grinding machine 1 502. Milling M/C 2 1003. Drilling M/C 2 100
TOTAL MARKS: -- -- -- -- 250
IX (d). MARINE - FOURTH SEMESTER – COMPUTER AIDED MARINE ENGINEERING DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer (With latest
processor to suit Auto CAD)30 nos 10
2. MS Windows OS 30 nos 053. AutoCAD software (release
2000 or above)30
License05
TOTAL MARKS: -- -- -- -- 20
IX (e). MARINE - FOURTH SEMESTER – ELECTRICAL DRIVES AND CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)ELECTRICAL LAB
1. DC ammeter 0-5A 1 no 012. DC ammeter 0-25A 1 no 013. DC voltmeter 0-30V 1 no 014. DC voltmeter 0-300V 1 no 01
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 61
5. Rheostat 10.8 ,8.5A 1 no 016. AC ammeter 0-5A 1 no 017. AC ammeter 0-10A 2 nos 028. AC voltmeter 0-50V 3 nos 039. AC wattmeter 5A-10A
(0-750W, 0-600V) 3 nos 03
10. Loading rheostat 5A,230V 1 no 0111. Tachometer-Analog 0-1000
rpm1 no 01
12. Variac (Auto Transformer) 20A, 250V
2 nos 02
13. 3 point starter 20A, 220V 1 no 0114. Dol starter 16A, 415V 1 no 0115. Star /Delta starter 20A,600V 1 no 0116. Over load relay 1 to 2.5A 1 no 0117. Air break contactors 20A, 220V 4 nos 0418. Push button 2A ,220V 2 nos 0219. Limit switch 20A,220V 1 no 0120. MCB 20A single pole 1 no 0121. MCB 20A double pole 1 no 0122. ELCB 2pole 20A,100mA 1 no 0123. ELCB 4POLE 20A,100mA 1 no 01
ELECTRONICS LAB1. Transformer 230/ 9-0-9V, 1A 4 nos 042. Resistor 1 K/ ½ W 3 nos 033. Capacitor 1000 F/25V 4 nos 044. IC 7805 1 no 015. Logic Gates IC 7400, 7408,
7432, 7404, 7402, 7486each 1
no01
6. Stepper Motor Drive kit 1 no 017. Servo Motor Drive Kit 1 no 018. SMPS Trainer Kit 1 no 019. UPS Trainer Kit 1 no 01
10. Inverter Kit 1 no 0111. Digital Multimeter 1 no 0112. LED 7Segment Laser Diode 1 each 01
TOTAL MARKS: -- -- -- -- 53
IX (f). MARINE - THIRD SEMESTER – WORKSHOP TECHNOLOGY – I PRACTICAL
MECHANICAL – IV SEM. – MANUFACTURING TECHNOLOGY-I CAN BE UTILISED
IX (g). MARINE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 62
X. MECHATRONICS
X (a). MECHATRONICS - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Dual Power Supply 0-15V 10 202. High Voltage Power Supply 0-
250v2 20
3. Signal Generator 1 MHz 10 204. Dual Trace CRO 20 MHz & 60
MHz5 + 5 20
5. Transformer 12-0-12V 5 106. Digital Multi meter 10 10
TOTAL MARKS: 100
X (b). MECHATRONICS - THIRD SEMESTER – ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. REGULATED POWER
SUPPLY (0-30V)4 Nos 40
2. AUDIO OSCILLATOR 1 No. 203. SINGLE PHASE
TRANSFORMER2 Nos 20
4. AUTOTRANSFORMER 2 Nos 20TOTAL MARKS: 100
X (c). MECHATRONICS - THIRD SEMESTER – MANUFACTURING TECHNOLOGY PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Lathe 15 No s 15
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 63
2. Milling machine 3 No s 15
3. Cylindrical grinding machine 1No 25
4. Surface grinding machine 1 No 15
5. Tool and cutter grinding machine
1 No 15
6. Shaper 2 No s 15
TOTAL MARKS: 100
X (d). MECHATRONICS - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)GENERAL [COMMON LABORATORIES] – CAN BE UTILISED
X (e). MECHATRONICS - FOURTH SEMESTER – ANALOG AND DIGITAL ELECTRONICS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC TRAINER WITH POWER
SUPPLY FACILITY10 30
2. CATHODE RAY OSCILLOSCOPE
1 30
3. AUDIO OSCILLATOR 1 40
TOTAL MARKS: 100
X (f). MECHATRONICS - FOURTH SEMESTER – PROGRAMMING IN C PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)HARDWARE REQUIREMENT
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 64
1. Desktop Computers 36 Nos. 30
2. Laser Printer 4 Nos 30
SOFTWARE REQUIREMENT1. C-Compiler with Editor 40
TOTAL 100
X (g). MECHATRONICS - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILLS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)GENERAL COMMON PRACTICAL – CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 65
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 66
THIRD YEAR LABORATORY EQUIPMENT
I. CIVIL ENGINEERING
I (a). CIVIL - FIFTH SEMESTER – CONSTRUCTION PRACTICE LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1 Slump Test Apparatus 1 No. 102 Compaction Factor Test
Apparatus 1 No. 10
3 Vee Bee Consistometer 1 No. 10
4
Compression Testing Machine (100 t Capacity) . (Available in M.T Lab may be used)
1 No.
10
5 Concrete Rebound Hammer 1 No. 10
6Flakiness Index Test Apparatus (Thickness & Length Gauges)
1 Set.05
7I.S.Sieves ( All Standard Sizes as required for test as per IS Code)
2 Set.05
8 Wire Brushers (2”/4”) 6 No. 019 Steel moulds
(150x150x150mm) 6 No. 01
10 Hand operated Bar cutting machine 1 No. 01
11 Digital Ultra Sonic Concrete Tester 1 No. 05
12 Concrete Core Extracting/ Drilling Rig 1 No. 05
13 Bar Bending Table 1 No. 0414 Bar Bending Levers
(6,8,10,12mm) 4 No. 01
15 Cutting Pliers / Nose Pliers 4 No. 0116 Hack Saw Frames with blades 2 No. 0117 Wooden Model Bricks with
Closers 200 No. 01
18 Standard Spatula & Shovels 4 No. 0119 Trowels of different sizes 6 No. 0120 Tamping rods (16mm dia) 4 No. 0121 Weighing Machine (100 to200
kG) 1 No. 01
22 Electronic Balances (5/10kG) 4 No. 0123 Steel Hammers 2 No. 0124 Steel Chisels 2 No. 0125 Steel Pegs/Arrows/Nails 50 No. 0126 Nylon Ropes (10mm dia) 100 m. 01
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 67
27 Nylon Threads 10 Bundles
01
28 Steel tapes (30m/15m/3m-2Nos each) 6 No. 01
29 90° Steel/Wooden Square Edge 4 No. 01
30 Steel scales (500mm/300mm) 4 No. 0131 Spirit Level 1 No. 0132 Stop Watches 2 No. 0133 Steel Trays/ Ponds 12 No. 0134 Water measuring jars 12 No. 0135 Plastic/Steel Buckets 6 No. 0136 Plastic/Steel Mugs 6 No. 01
TOTAL MARKS: -- -- -- -- 100
I (b). CIVIL - FIFTH SEMESTER – CAD IN CIVIL ENGINEERING DRAWING II
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)SOFTWARE REQUIREMENTS
1. Software - CAD software like AutoCAD
30 users 40
HARDWARE REQUIREMENTS1. Desktop Computer System
with latest configuration30 Nos 40
2. Power Backup (UPS) 10 KVA 10
3. Laser Printer 2 Nos 10TOTAL MARKS: -- -- -- -- 100
I (c). CIVIL - FIFTH SEMESTER – COMMUNICATION AND LIFE SKILLS PRACTICAL
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
I (d). CIVIL - SIXTH SEMESTER – HYDRAULICS AND PLUMBING LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)HYDRAULICS LAB
1 Manometers and pressure 1 Set 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 68
gauges.(All types for study purpose)
2 Bernoulli’s theorem apparatus (closed circuit) 1 No. 10
3Venturimeter / Orificemeter apparatus (closed circuit)with all accessories
1 No.10
4Pipe friction apparatus (closed circuit) with allaccessories
1 No.10
5
Orifice/Mouthpiece apparatus (closed circuit) with allaccessories
1 No.
10
6 Notch apparatus (closed circuit) with accessories 1 No. 05
7 Reciprocating pump test rig with accessories 1 No. 10
8 Centrifugal pump test rig 1 No. 10
9 Raingauge set up to measure rainfall. 1 Set 05
PLUMBING LAB
1Models display showing all specials used in watersupply and sanitary
Complete set
05
2
Vice set and cutter for threading the G.I pipes
Vice Set consists of
• Pipe vice: Size 50 mm • Bench Vice : Size 100
mm/ 150 mm • Die stock and dies
(universal die set or two piece die set) of sizes 1/2 " to 2"
• Three wheel pipe cutter. • Pipe wrench of required
size • Hacksaw frame with
blades • A round file • GI/PVC Pipes with
specials of different sizes in sufficient quantity.
• Other required accessories.
Complete set
05
3 Making bathroom connection
Complete set
05
4Making suction and delivery connections forcentrifugal pump
Complete set
05
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 69
I (e). CIVIL - SIXTH SEMESTER – COMPUTER APPLICATIONS IN CIVIL ENGINEERING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)SOFTWARE REQUIREMENTS
1.Operating System - Windows XP or Windows Vista or Windows 7 / Linux
30 users
05
2.Office Package - Microsoft office 2000 or Office 2003 or Office 2007/Open Office
30 users
05
3.Softwares
RCC detailing software : Like CADs R.C, SCADDS
Steel detailing software: Like Tekla Structures
RCC Structures Analysis Using Software: Like STADD Pro, STRUTS , E Tab (Any one)
Project Management software: MS Project, Primavera
Drawing Maps GIS Software: Like Educational version of ESRI, Rolta , Super geotek ,Google earth pro (Any one)
Adeq.10
10
10
10
10
HARDWARE REQUIREMENTS1.
Desktop Computer System with latest configuration
30 Nos 20
2.Power Backup (UPS) 10 KVA 10
3.Laser Printer 2 Nos 10
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 70
II. MECHANICAL ENGINEERING
II (a). MECHANICAL - FIFTH SEMESTER – THERMAL ENGINEERING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Open cup apparatus 2 No. 042. Close cup apparatus 2 No. 043. Redwood viscometer 2 No. 044. Say bolt viscometer 2 No. 045. 4 stroke petrol engine
Model2 No. 04
6. 4 stroke diesel engine Model
2 No. 04
7. 2 stroke petrol engine Model
2 No. 04
8. Petrol engine of any make with following arrangements
• Load test arrangement
• Heat balance test arrangement
1 No. 12
9. Diesel engine of any make of any make with following arrangements
• Load test arrangement
• Heat balance test arrangement
1 No. 12
10. Multi -cylinder petrol engine of any make with Morse test setup
1 No. 12
11. Air compressor with set up for conducting volumetric efficiency test
1 No. 12
12. Refrigeration Testing Kit 1 No. 1213. Guarded Plate Apparatus 1 No. 12
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 71
II (b). MECHANICAL - FIFTH SEMESTER – MANUFACTURING TECHNOLOGY II PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)MACHINES
1. Vertical milling machine/ vertical milling attachment in Universal Milling Machine
2 Nos. 30
2. Universal Milling Machine with indexing head
2 Nos. 30
3. Surface Grinding Machine (Horizontal)
1 No. 10
4. Cylindrical Grinding machine
1 No. 10
5. Tool and Cutter grinder 1 No. 10EQUIPMENT AND TOOLS
6. Milling Cutter (2 Module cutter) & accessories
Complete sets
04
7. Milling Machine Handle and required accessories
2 sets 02
8. Grinding wheel OD 150 mm , ID 1’’(AA-65, K5, V8)
2 Nos. 02
9. Grinding wheel OD 300 mm , ID 150mm(AA-56, K5, V8)
1 No. 02
TOTAL MARKS: -- -- -- -- 100
II (c). MECHANICAL - FIFTH SEMESTER – COMMUNICATION AND LIFE SKILLS PRACTICAL
COMMUNICATION AND LIFE SKILLS PRACTICAL – GENERAL COMMON LAB – CAN BE UTILIZED
II (d). MECHANICAL - SIXTH SEMESTER – COMPUTER INTEGRATED MANUFACTURING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer
(Pentium processor)15 Nos. 15
2. Off line CNC Lathe and Milling simulation software
15 users 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 72
3. CNC Turning Machine 2 Nos. 234. CNC Milling Machine 2 Nos. 305. Laser Printer 1 No. 02
TOTAL MARKS: -- -- -- -- 100
II (e). MECHANICAL - SIXTH SEMESTER – PROCESS AUTOMATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Programmable Logic
Controller (PLC) Trainer Kit with
a) Solenoid operated DVCsb) Pneumatic Double Acting cylinders with limit switches
1 100
TOTAL MARKS: -- -- -- -- 100
II (f). MECHANICAL - SIXTH SEMESTER – AUTOMOBILE ENGINEERING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Automobile Mechanic’s
toolsComplet
e set05
2. 4 stroke petrol engine- with all accessories
15
3. 4 stroke Diesel engine- with all accessories
15
4. Engine cylinder with liner and cylinder bore dial gauge
03
5. Internal circlip plier, bearing puller
02
6. Feeler gauge to check valve clearance, hammer and accessories
02
7. Compressor to supply high pressure air to clean oil and water filters.
03
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 73
8. Oil pump and water pump 059. A.C. fuel pump / S.U.
electric fuel pump05
10. SOLEX carburetor 0511. MPFI. 0512. Inline Fuel Injection Pump 0513. CRDI 0514. Injectors 0515. Clutch set arrangement
with tools05
16. Complete gear box with tools
05
17. Complete steering arrangement
05
18. Differential unit with axles 05TOTAL MARKS: -- -- -- -- 100
II (g). MECHANICAL - SIXTH SEMESTER – ROBOTICS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Computer with Accessories 15 Nos. 102. Simulation Softwares
- ARISTO Software- SCORE BASE
Software
Adeq. 45
3. Hardware- 6 Axis Robot, Teach
Pendant control and PC Based control through Software
Adeq. 45
TOTAL MARKS: -- -- -- -- 100
II (h). MECHANICAL - SIXTH SEMESTER – REFRIGERATION AND AIR CONDITIONING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)WORKING MODELS OF THE FOLLOWING WITH ARRANGEMENTS FOR CONDUCTING TESTS
1. Refrigerator with test rig 1 102. Water cooler 1 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 74
3. Window A/C with test rig 1 104. Split A/C 1 105. Cooling tower 1 10
WORKING MODEL OF THE FOLLOWING TO CONDUCT EXPERIMENTS
6. Thermostat units 1 set 057. Cut off units 1 set 058. Thermostatic expansion
valve unit1 set 05
9. Automatic expansion valve unit
1 set 05
10. Sealed compressor with experimental setup
1 set 05
TOOLS:11. Mechanics tool set 1 set 02
12. Tube cutter 1 set 0213. Tube bender type 1 set 01
14. Tube bender spring 1 set 0115. Swaging tool 1 set 0116. Flaring block 1 set 0117. Flaring nut 1 set 0118. Pinching tool 1 set 0119. Capillary tube testing
gauge1 set 01
20. Blow Lamp 1 set 01SERVICE TOOLS:
21. Gas cylinder with receiver valve and key
1 set 02
22. Charging System 1 set 0223. Blow lamp 1 set 0124. Stem key 1 set 01
25. Spring remover 1 set 0126. Service valve 1 set 0127. ‘t’ connector 1 set 0128. High pressure gauge 1 set 0129. Compound gauge 1 set 0130. Leak detector 1 set 0131. Soldering and Brazing kit 1 set 01
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 75
III. ELECTRONICS AND COMMUNICATION ENGINEERING
III (a). ECE - FIFTH SEMESTER – ADVANCED COMMUNICATION SYSTEMS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
1. Regulated power supply - 0-30V 5 05
2. Dual trace CRO 2 053. Signal Generator - 1MHz 1 054. Fiber optics kit 1 05
5. PCM trainer KIT 1 20
6. ASK modulation &demodulation kit
1 20
7. PSK modulation &demodulation kit 1 20
8 FSK modulation &demodulation kit 1 20
TOTAL MARKS: -- -- -- -- 100
III (b). ECE - FIFTH SEMESTER – MICRO CONTROLLER PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
1. 8051 Microcontroller Kit 18 45
2. Digital I/O Interface Board 1 05
3. Matrix keyboard Interface Board
1 05
4. Seven segment LED display Interface Board
1 05
5. LCD Display Interface Board
1 05
6. Traffic light Interface Board 1 05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 76
7. 8 bit ADC and 8 bit DAC Interface Board
1 05
8. STEPPER MOTOR CONTROL Interface Board
1 05
9. DC motor control Interface Board
1 05
10. Lift control Interface Board 1 05
11. Sending data through serial port between controller kits
1 05
12. Printer Interface Interface Board.
1 05
TOTAL MARKS: -- -- -- -- 100
III (c). ECE - FIFTH SEMESTER – VERY LARGE SCALE INTEGRATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1.
FPGA should have atleast 10 switches for input, 8 LEDs for output, a 7 segment display, debounced push switch( 2 Nos) for manual clock input and external clock source. Also It should have the provision for various interfaces like stepper motor, traffic light and DC motor control
Adeq. 80
2. PPGA Kit and interface kit 20TOTAL MARKS: -- -- -- -- 100
III (d). ECE - SIXTH SEMESTER – EMBEDDED SYSTEMS PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 77
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1.
ARM7 TDMI Kit with interface boards for the above experiments The Chip set may be TMS470, LPC2138, LPC2148, or STR7 etc
10 nos (10
batches with 3
students in each batch)
60
2.Interface support and devices like RTC, ADC, LCD, Seven segment display, LEDS and Switches
Adeq. 40
TOTAL MARKS: -- -- -- -- 100
III (e). ECE - SIXTH SEMESTER – COMPUTER HARDWARE AND NETWORKS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)COMPUTER SERVICING PRACTICAL
Hardware Requirements :
1.Computer with Pentium / Core processors with add on cards
36 NOS. 36
2.Hard disk drive
6 nos. 02
3.CD Drive
6 nos. 02
4.DVD Writer
6 nos. 02
5.Blank DVD
50 nos. 01
6.Blank Blu-ray disk
50 nos. 01
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 78
7.Head cleaning CD
Adeq. 01
8.Dot matrix Printer
6 nos. 03
9.Laser Printer
6 nos. 03
10.Digital Camera
2 nos. 02
11.Web Camera
2 nos. 02
12.Scanner
2 nos. 02
13.Blue tooth device and cell phone
2 nos. 02
14.Bio-metric device
2 nos. 02
15.Laptop
18 nos. 18
Software Requirements
16. Windows XP operating system
Adeq.
17. Linux operating system Adeq.
18. Disk Manager (for the purpose of partition and format)
Adeq.
19. Norton or E-Trust Antivirus software
Adeq.
20. Scandisk Adeq.
21. DVD Writer S/W Adeq.
22. CD Burning S/W (Ahead Nero or latest S/W)
Adeq.
23. Blu-ray Burning S/W Adeq.
COMPUTER NETWORK PRACTICALTools Requirement
1. Crimping Tool 6 nos. 02
2. Network CablesEquipment Requirement
3. Modem 1 no. 02
4. Laser Printer 1 no. 01
5. Hub 1 no. 03
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 79
6. Router 1 no. 03
7. switch 1 no. 10
System Requirement
8. Pentium Systems with on board Ethernet Card (NIC)
18 nos.
Software Requirement
9. Windows 2000 or 2003 or LINUX Server
Adeq.
10. OS Windows XP with service pack
Adeq.
11. Drivers Software Adeq.
TOTAL MARKS: -- -- -- -- 100
III (f). ECE - SIXTH SEMESTER – SIMULATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Intel Core i-5 or i-7 System
with Graphics accelerator Card
20 nos 20
2. Laser Printer in network 1 no 10
3. 10 KVA / 7.5 KVA UPS with 1 Hour Back-up
1 no 10
4. Software
OrCAD / Tina-TI / Lab View multisim / LT spice / P Spice / any equivalent open source software
Adeq. 60
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 80
IV. ELECTRICAL AND ELECTRONICS ENGINEERING
IV (a). EEE - FIFTH SEMESTER – ELECTRICAL CIRCUITS SIMULATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. PC – Pentium Dual Core 30 30
2. MATLAB 7.5 - Multi user 30 users 60
3. UPS 5KVA with half an Hour battery back up
30 users 10
TOTAL MARKS: -- -- -- -- 100
IV (b). EEE - FIFTH SEMESTER – MICRO CONTROLLER PRACTICAL
MICRO CONTROLLER PRACTICAL - GENERAL COMMON LAB WITH ECE – CAN BE UTILISED
IV (c). EEE - FIFTH SEMESTER – ELECTIVE PRACTICAL - I – CONTROL OF ELECTRICAL MACHINES PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1 Transformer oil Tester Kit 1 10
2 Acidity test kit 1 10
3 Thermal Overload Relay Tester
1 05
4 Control circuit for Jogging of 3 phase IM
1 05
5 Control Circuit for Semi-automatic Star –delta Starter
1 05
6 Control circuit for Automatic 1 05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 81
star-delta starter
7 Control circuit for dynamic braking of cage motor
1 05
8 control circuit for two speed pole changing motor
1 05
9 control circuit for automatic Rotor resistance starter
1 05
10 Speed control of DC motor using SCR
1 05
11 control circuit for single phase preventer
1 05
12 control circuit for DOL starter using PLC
1 05
13 control circuit for Star-Delta starter using PLC
1 05
14 Control circuit for jogging, forward and reverse operations using PLC
1 05
15 Control circuit for single phase preventer using PLC
1 05
16 Control circuit rotor resistance starter using PLC
1 05
17 PLC 2 10
TOTAL MARKS: -- -- -- -- 100
IV (d). EEE - FIFTH SEMESTER – ELECTIVE PRACTICAL - I – PROGRAMMABLE LOGIC CONTROLLER PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1 PLC with suitable No of I/O
(various brands, Computer interface cables software etc)
5 15
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 82
2 Push button switch limit switch, reed switch, photo electric sensor, inductive proximity sensor Capacitive proximity sensor
5 Each 15
3 PLC Power supply (SMPS if necessary)
Required No
05
4 DOL Starter 2No 05
5 440V, 16A Contactor 3P,2NO+2NC
5 No 05
6 440V, 16A Contactor 4P,2NO+2NC
2No 05
7 230V, 16A Contactor 3P,2NO+2NC
5N0 05
8 Industrial sliding door automation model
1 No 05
9 Conveyor Belt sorting model
1 No 05
19 Three floor Hoist controller model
1 No 05
11 Analog input to PLC (Addon blocks if needed)
1 No 05
12 LAMP LOAD for Burglar scare random lighting in building with variable timing
1 No 05
13 Heater control with PID function of the PLC- 1000 W water heater with accessories
1 No 05
14 Round Table - Liquid filling System (simple model)
05
15 Electric bell (230V Operation)
2 NO 05
16 Slow speed 12V DC, Low Watt Permanent Magnet Motor
1No 05
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 83
IV (e). EEE - FIFTH SEMESTER – ELECTIVE PRACTICAL - I – ELECTRICAL MACHINE DESIGN PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Permanent Magnets Adeq. 052. Galvanometers Adeq. 05
3. Flux meter Adeq. 05
4. Growler Adeq. 05
5. 3Phase induction motor stator with winding
Adeq. 10
6. 1KVA Single phase 230/15 loading Transformer
Adeq. 10
7. 1KVA 3 phase Transformers (OR) E & I type stampings for 1KVA Transformer - Primary Coils & Secondary Coils for 1KVA Transformer
Adeq. 05
8. 5KW DC armature without winding
Adeq. 05
9. 5KW DC machine with inter poles
Adeq. 05
10. Stator with winding, rotor
and end covers with
bearing of a 3HP cage
induction motor
Adeq. 10
11. 5KVA Single phase
alternator
Adeq. 10
12. 3phase 3HP wound rotor
induction motor
Adeq. 10
13. Ceiling Fans Adeq. 05
14. Motor coil winding
machines
Adeq. 10
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 84
IV (f). EEE - SIXTH SEMESTER – WIRING AND WINDING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
1 SPST Flush type switch - 250 V, 5A
15 NOS. 02
2. Batten Lamp holder 10 NOS. 02
3. Round block 20 NOS. 02
4.
Switch board –
20 cm x 15 cm,
10 cm x 10 cm
1 no.
15 nos.
02
5. M.C.B. - 250 V, 10 A, 2 pole 2 nos. 02
6. Push button switch - 250 V, 5A
5 nos. 02
7. 2 plate ceiling rose - 250 V, 5A
10 nos. 02
8. Electric bell - 250 V, 5A 3 nos. 02
9. Single phase D.P.I.C. Main switch - 250 V, 16A
3 nos. 02
10. Single phase D.O.L. Starter - 250 V, 10 A
1 no. 02
11. Three phase T.P.I.C. Main switch - 500 V, 30 A
2 nos. 02
12. Star / delta starter - 440 V, 5 H.P.
1 no. 02
13. E.L.C.B. - 500 V, 30 A 1 no. 02
14.Single phase, 2 wire watt-hour meter - 250 V, 15A, 50 hz
1 no. 02
15. Cut out - 16 A 1 no. 02
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 85
16.Single phase, 4 way distribution Box - 250 V, 15 A
1 no. 02
17. Mercury vapour lamp with accessories
1 set 02
18. Sodium vapour lamp with accessories
1 set 02
19.Fluorescent tube light with electronic choke and holder - 40 W
1 set 02
20. Neon tube lamp (any sign) 3 blocks 02
21. Two way flush type switch - 250 V, 5A
10 nos. 02
22. Wooden box - 30 cm x 15 cm
1 no. 02
23. PVC pipe - 1” required quantity
02
24 Saddle clips - 1” required quantity
02
25.Coppor wire - 2.5 sq.mm.
1.5 sq.mm
required quantity
02
26.
1” junction box - One way
Two way
Three way
required quantity
02
27. Screws required quantity
02
28. Bare copper wire - 2.5 sq. mm
required quantity
02
29.Lamps (C.F.L. or Incandescent) - Different ratings
required quantity
02
Transformer core: required quantity
02
30. EI60 type stampings of 0.35 mm thickness
required quantity
02
31 Readymade bobbins (EI60/21)
required quantity
02
32. Winding coil (copper) required quantity
05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 86
25 SWG
36 SWG
37 SWG
38 SWG
33 Varnish required quantity
01
34. Winding machine required quantity
10
35. Ceiling fan (motor) required quantity
05
36.Single phase induction motor - 0.5 H.P. 50 Hz, 240 V
required quantity
05
37.Three phase squirrel cage induction motor - 3 H.P., 500 V, 50 Hz
required quantity
10
TOTAL MARKS: -- -- -- -- 100
IV (g). EEE - SIXTH SEMESTER – COMPUTER AIDED ELECTRICAL DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1 PC Pentium Core i5 / i7 30 30
2 Auto CAD software 30 users 60
3 UPS10 KVA with half One hour battery back up 1 10
TOTAL MARKS: -- -- -- -- 100
IV (h). EEE - SIXTH SEMESTER – ELECTIVE PRACTICAL - II – POWER ELECTRONICS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 87
1 Dual trace CRO 20 MHZ 4
2 Regulated Power Supply (0-30 V) 4
3 Regulated Power Supply (0-300 V)
4
4 Fixed DC Power Supply 12 V 4
5 Fixed DC Power Supply 5 V 4
6 Dual power supply ±15 V 4
7 Transformer Step down 230/12 V
4
8 Transformer 230/24-0-24 V
4
9 Pulse Transformer 1:1:1 4
10 Current Transformer 5/1 A 4
11 Stepup transformer12/230 V with
sensing
4
12 Function Generator 1 MHZ 4
13 Pulse Generator 4
14 Voltmeter (0-300V)(0-10V)
2
15 Ammeter (0-500mA)(0-100uA)
2
16 Digital multimeter Adeq. 4
17 Universal motor ¼ HP 10
18 DC shunt motor ½ HP 10
19 DC shunt motor with loading arrangement ½ HP 10
20 Three phase induction motor ¼ HP 10
TOTAL MARKS: -- -- -- -- 100
IV (i). EEE - SIXTH SEMESTER – ELECTIVE PRACTICAL - II – BIO MEDICAL INSTRUMENTATION PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 88
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Dual Trace CRO 2 nos 052. Regulated Power Supply 0-
30 V DC3 nos 03
3. mA Current Source 2 nos 024. Transducers for Blood
Pressure and Body Temperature and Pulse Sensors
Each 2 nos
10
5. Signal Conditioners for the above Transducers
05
6. Sphgrmanometer 1 no 057. 12 Lead Portable ECG
monitor1 no 20
8. Portable EEG equipment 1 no 209. Portable EMG equipment 1 no 20
10. Different types of PH electrodes
05
11. Portable Electrical Safety Tester
1 no. 05
TOTAL MARKS: -- -- -- -- 100
IV (j). EEE - SIXTH SEMESTER – ELECTIVE PRACTICAL - II – COMPUTER HARDWARE AND NETWORKS PRACTICAL
COMPUTER HARDWARE AND NETWORKS PRACTICAL – COMMON LAB WITH ECE
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 89
V.COMPUTER ENGINEERING
V (a). COMPUTER ENGINEERING - FIFTH SEMESTER – WEB PROGRAMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)HARDWARE REQUIREMENT
1. Desktop Computers 36 nos. 362. Laser Printer 4 nos. 10
SOFTWARE
REQUIREMNT
1. Notepad or any one Editor Adeq. 02
2. Web browser Adeq. 02
3. Apache Tomcat 4.0 x or JRun 3.x
Adeq. 50
TOTAL MARKS: -- -- -- -- 100
V (b). COMPUTER ENGINEERING - FIFTH SEMESTER – RELATIONAL DATABASE AND MANAGEMENT SYSTEMS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
HARDWARE REQUIRED1. A Server with Oracle 8i or
higher (Oracle 10g is preferred)
Adeq. 28
2. 36 computers networked and configured with TCP/IP.
Adeq. 36
3. Laser Printer 3 nos. 06SOFTWARE REQUIRED
1. SQL *PLUS Adeq. 30
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 90
V (c). COMPUTER ENGINEERING - FIFTH SEMESTER – DOT NET PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)SOFTWARE REQUIRED:
1. . Net Frame Work Adeq. 30
2. Visual Studio IDE Adeq. 30
HARDWARE REQUIRED: Adeq.
1. Computer with Pentium IV /
Dual core Processors
36 NOS. 36
2. Laser printers 4 nos. 04
TOTAL MARKS: -- -- -- -- 100
V (d). COMPUTER ENGINEERING - SIXTH SEMESTER – COMPUTER SERVICING AND NETWORK PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
COMPUTER SERVICING PRACTICAL
Hardware Requirements :
1.Computer with Pentium / Core processors with add on cards
36 NOS. 36
2.Hard disk drive
6 nos. 02
3.CD Drive
6 nos. 02
4.DVD Writer
6 nos. 02
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 91
5.Blank DVD
50 nos. 01
6.Blank Blu-ray disk
50 nos. 01
7.Head cleaning CD
Adeq. 01
8.Dot matrix Printer
6 nos. 03
9.Laser Printer
6 nos. 03
10.Digital Camera
2 nos. 02
11.Web Camera
2 nos. 02
12.Scanner
2 nos. 02
13.Blue tooth device and cell phone
2 nos. 02
14.Bio-metric device
2 nos. 02
15.Laptop
18 nos. 18
Software Requirements
16. Windows XP operating system
Adeq.
17. Linux operating system Adeq.
18. Disk Manager (for the purpose of partition and format)
Adeq.
19. Norton or E-Trust Antivirus software
Adeq.
20. Scandisk Adeq.
21. DVD Writer S/W Adeq.
22. CD Burning S/W (Ahead Nero or latest S/W)
Adeq.
23. Blu-ray Burning S/W Adeq.
COMPUTER NETWORK PRACTICAL
Tools Requirement
1. Crimping Tool 6 nos. 02
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 92
2. Network Cables Adeq.
Equipment Requirement
3. Modem 1 no. 024. Laser Printer 1 no. 015. Hub 1 no. 036. Router 1 no. 037. switch 1 no. 10
System Requirement
8. Pentium Systems with on board Ethernet Card (NIC)
18 nos.
Software Requirement
9. Windows 2000 or 2003 or LINUX Server
Adeq.
10. OS Windows XP with service pack
Adeq.
11. Drivers Software Adeq.
TOTAL MARKS: -- -- -- -- 100
V (e). COMPUTER ENGINEERING - SIXTH SEMESTER – SYSTEM ADMINISTRATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Harware Requirement
1. Pentium Systems with on board Ethernet Card (NIC)
Adeq. 36
2. Server Adeq. 24
Software Requirement
3. Windows 2000 or 2003 or LINUX Server
Adeq. 20
4. OS Windows XP with service pack
Adeq. 20
TOTAL MARKS: -- -- -- -- 100
V (f). COMPUTER ENGINEERING - SIXTH SEMESTER – MULTIMEDIA SYSTEMS PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 93
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Hardware Requirement
1. Desktop PCs P-IV or Higher configuration, 200 GB HDD, 2 MB RAM
30 NOS. 30
2. Laser printer Monochrome, Color
1 EACH 05
3. Digital (video)Camera 2 no. 204. Flat bed A4 size Scanner 1 no. 05
Software Requirement
1. Operating system - Windows XP, Windows 7, Linux
Adeq. 10
2. Software tools - Open Source software or Commercial software. Experiments may be done using either OSS or commercial software.
30 users 30
TOTAL MARKS: -- -- -- -- 100
V (g). COMPUTER ENGINEERING - SIXTH SEMESTER – OPEN SOURCE SOFTWARE PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Hardware Requirement
1. Pentium Systems with on board Ethernet Card (NIC)
18 nos. 36
2. Server 1 no. 24Software Requirement
1. Open Source Software : PHP, MySQL and Python
Adeq. 40
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 94
VI. INFORMATION TECHNOLOGY
VI (a). INFORMATION TECHNOLOGY - FIFTH SEMESTER – WEB PROGRAMING PRACTICAL
WEB PROGRAMING PRACTICAL - COMMON WITH COMPUTER ENGINEERING – CAN BE UTILISED
VI (b). INFORMATION TECHNOLOGY - FIFTH SEMESTER – RELATIONAL DATABASE AND MANAGEMENT SYSTEMS PRACTICAL
RELATIONAL DATABASE AND MANAGEMENT SYSTEMS PRACTICAL - COMMON WITH COMPUTER ENGINEERING – CAN BE UTILISED
VI (c). INFORMATION TECHNOLOGY - FIFTH SEMESTER – DOT NET PROGRAMMING PRACTICAL
DOT NET PROGRAMMING PRACTICAL - COMMON WITH COMPUTER ENGINEERING – CAN BE UTILISED
VI (d). INFORMATION TECHNOLOGY - SIXTH SEMESTER - ADVANCED JAVA AND XML PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
HARDWARE
REQUIREMENT
1.Desktop Computers
36 nos 36
2.Laser Printer
4 nos. 04
SOFTWARE REQUIREMNT
1. XML Editor with tools Adeq. 30
2. JDK1.1 or above, BDK 1.0
or above
Adeq. 30
TOTAL MARKS: -- -- -- -- 100
VI (e). INFORMATION TECHNOLOGY - SIXTH SEMESTER - SYSTEM ADMINISTRATION PRACTICAL
SYSTEM ADMINISTRATION PRACTICAL - GENERAL COMMON LAB – COMPUTER ENGINEERING – CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 95
VI (f). INFORMATION TECHNOLOGY - SIXTH SEMESTER - MULTIMEDIA SYSTEMS PRACTICAL
MULTIMEDIA SYSTEMS PRACTICAL - GENERAL COMMON LAB – COMPUTER ENGINEERING – CAN BE UTILISED
VI (g). INFORMATION TECHNOLOGY - SIXTH SEMESTER - COMPUTER HARDWARE AND NETWORKS PRACTICAL
COMPUTER HARDWARE AND NETWORKS PRACTICAL - GENERAL COMMON LAB – COMPUTER ENGINEERING – CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 96
VII. AUTOMOBILE ENGINEERING
VII (a). AUTOMOBILE ENGINEERING - FIFTH SEMESTER - AUTOTRONICS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)All the components should be fitted on the frame / board
Adeq. 10
1. Battery Charger 1 no. 102. Hydrometer, Specific gravity
tester2 nos. each
10
3. Multimeter 2 nos. 054. Transformer 05
5. Diode 05
6. Ammeter 05
7. Voltmeter 05
8. Load Resistance 05
9. Connective wires 05
10. Bread Board 05
11. DRB 05
12. Capacitor
min. 6 nos. each
05
13. Other necessary
components and
consumables
sufficient
quantity
20
TOTAL MARKS: -- -- -- -- 100
VII (b).
AUTOMOBILE ENGINEERING - FIFTH SEMESTER - MANUFACTURING TECHNOLOGY II PRACTICAL
MANUFACTURING TECHNOLOGY II PRACTICAL – GENERAL COMMON LAB - MECHANICAL – CAN BE UTILISED
VII (c).
AUTOMOBILE ENGINEERING - SIXTH SEMESTER - COMMUNICATION AND LIFE SKILLS PRACTICAL
COMMUNICATION AND LIFE SKILLS PRACTICAL – GENERAL COMMON LAB - CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 97
VII (d).
AUTOMOBILE ENGINEERING - SIXTH SEMESTER - COMPUTER INTEGRATED MANUFACTURING PRACTICAL
COMPUTER INTEGRATED MANUFACTURING PRACTICAL – GENERAL COMMON LAB - CAN BE UTILISED
VII (e).
AUTOMOBILE ENGINEERING - SIXTH SEMESTER - AUTOMOBILE WORKSHOP PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Two wheeler 2 nos. 202. Four wheeler 1 no. 203. Wheel truing machine 1 no. 104. Milling machine 1 no. 105. Valve grinding machine 1 no. 106. Honing / boring machine 1 no. 107. Engine lathe 1 no. 058. Work table with 4 Bench
vices5 nos. 02
9. Spanner set (6 to 32 mm) D/E and Ring
5 sets 02
10 Special tools (Wheel spanner ,Wrenches and Pliers etc.,)
2 sets 02
.11. Screw drivers – various sizes
5 sets 02
12. Grease gun 5 Nos. 0113. Feeler gauges 5 Nos. 0114. Steel rule 5 Nos. 0115. Adjustable spanner 5 Nos. 0116. Socket spanner 5 Nos. 0117. Allenkey set 5 Nos. 0118. Other workshop tools 01
TOTAL MARKS: -- -- -- -- 100
VII (f). AUTOMOBILE ENGINEERING - SIXTH SEMESTER - TWO AND THREE WHEELER TECHNOLOGY PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Two wheeler 3 nos. 60
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 98
2. Three wheeler 2 nos. 303. Special tools 5 sets 104. Each experiment separate
components are required5. Sufficient quantity of tools6. Proper material handling
devicesTOTAL MARKS: -- -- -- -- 100
VII (g).
AUTOMOBILE ENGINEERING - SIXTH SEMESTER - TRACTOR AND FARM EQUIPMENTS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Tractor 1 no. 302. Power triller 1 no. 303. Ploughing kits Each
1 no.20
4. Power sprayer 1 105. Special tools 5 sets 10
TOTAL MARKS: -- -- -- -- 100
VII (h).
AUTOMOBILE ENGINEERING - SIXTH SEMESTER - AERONAUTICS ENGINEERING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)(1) (2) (3) (4) (5) (6) (7) (8)
1. UTM 1 no. 202. Shear testing equipment 1 no. 103. Flow through Pipes kit 1 no. 104. Wind tunnel kit 1 no. 205. Experimental kit 1
no./each40
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 99
VIII. MARINE ENGINEERING
VIII (a).
MARINE ENGINEERING - FIFTH SEMESTER - MARINE DIESEL ENGINE AND POWER PLANT PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Open cup apparatus 2 nos. 052. closed cup apparatus 2 nos. 053. Redwood Viscometer
apparatus2 nos. 05
4. Saybolt Viscometer apparatus
2 nos. 05
5. four stroke engine 1 no. 106. Two stroke engine 1 no. 107. Multi cylinder Diesel Engine 1 no. 108. Air compressor with
Volumetric efficiency kit1 no. 10
9. Fuel Injector Testing Machine
1 no. 10
10. Fuel injection pumps and vice with tools
2 nos. 05
11. Diesel injectors and Pressure Testing machine with toos
2 nos. 05
12. fuel feed pump and pump vice
2 nos. 05
13. Marine Engine with propeller (model).
1 no. 15
TOTAL MARKS: -- -- -- -- 100
VIII (b).
MARINE ENGINEERING - FIFTH SEMESTER - PERSONAL SURVIVAL TECHNIQUES PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Life boat 15
2. Life Craft 15
3. Buoyant apparatus
No.of items
should be
sufficie 15
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 100
4. Davit 15
5. EPIRB 15
6. Heligrop 15
7. Survival capsules
nt for 30
users
10
TOTAL MARKS: -- -- -- -- 100
VIII (c).
MARINE ENGINEERING - FIFTH SEMESTER - SEAMANSHIP AND LIFE SAVING APPLIANCES PRACTICAL
S.No
List of Equipments
(10 marks each)Q
uant
ity
Req
uire
d
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks(1
0 m
arks
ea
ch)
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Different types of ropes
(Bends and Hitches).
1 no.
2. Different types of knots 1 no.
3. Settings of sail 1 no.
4. Different types of blocks 1 no.
5. Emergency position
indicating radio beacon
(EPIRB).
1 no.
6. Life boat 1 no.
7. Life raft (inflatable). 2 nos.
8. Life raft (rigid). 2 nos.
9. Life buoy. 15 nos.
10. Life jacket. 15 nos.
TOTAL MARKS: -- -- -- -- 100
VIII (d).
MARINE ENGINEERING - FIFTH SEMESTER – COMMUNICATION AND LIFE SKILLS PRACTICAL
COMMUNICATION AND LIFE SKILLS PRACTICAL – GENERAL COMMON LAB
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 101
IX. MECHATRONICS
IX (a). MECHATRONICS - FIFTH SEMESTER - MICROCONTROLLER PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
[10
MA
RK
S EA
CH
] M
axim
um M
arks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. 8051 Microcontroller Kit 18 Nos
2. Digital I/O Interface Board 2 Nos
3. Matrix keyboard Interface Board
2 Nos
4. Seven segment LED display Interface Board
2 Nos
5. Traffic light Interface Board 2 Nos
6. 8 bit ADC Interface Board 2 Nos
7. 8 bit DAC Interface Board 2 Nos
8. STEPPER MOTOR CONTROL Interface Board
2 Nos
9. DC motor control Interface Board
2 Nos
10. Sending data through serial port between controller kits
2 Nos
TOTAL MARKS: -- -- -- -- 100
IX (b). MECHATRONICS - FIFTH SEMESTER - HYDRAULIC, PNEUMATIC & PLC PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Pneumatic
1. Basic Trainer Kit 2 162. Electro Pneumatic Trainer Kit 1 183. PLC Trainer Kit 1 16
Hydraulic1. Basic Trainer Kit 1 16
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 102
2. Electro Hydraulic Trainer Kit 1 183. Pneumatic Trainer Kit 1 16
TOTAL MARKS: -- -- -- -- 100
IX (c). MECHATRONICS - FIFTH SEMESTER - CNC PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. CNC TURN 2 Nos 502. CNC MILLER 2 Nos 50
TOTAL MARKS: -- -- -- -- 100
IX (d). MECHATRONICS - SIXTH SEMESTER - PROCESS CONTROL PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. ON-OFF LEVEL PROCESS Adeq. 10
2. ON-OFF PRESSURE PROCESS
Adeq. 10
3. ON-OFF TEMPERATURE PROCESS
Adeq. 10
4. LVDT TRAINER MODULE Adeq. 15
5. RTD TRAINER MODULE Adeq. 10
6. PID CONTROLLER Adeq. 10
7. THEMISTOR TRAINER MODULE
Adeq. 15
8. CONTROL VALVE TRAINER KIT
Adeq. 10
9. THERMOCOUPLE 3 Nos 10TOTAL MARKS: -- -- -- -- 100
IX (e). MECHATRONICS - SIXTH SEMESTER - ROBOTICS AND AUTO ELECTRONICS PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 103
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Six Axes Robot System Adeq. 20
2. Robot Simulation Software (Ten User)
Adeq. 20
3. Photosensor Trainer Kit Adeq. 20
4. Proximity Switch Trainer Kit Adeq. 20
5. ANY TWO TRANSDUCER TRAINER KIT(PHOTOSENSOR, PROXIMITY SWITCH TRAINER KIT)
Adeq. 20
TOTAL MARKS: -- -- -- -- 100
IX (e). MECHATRONICS - SIXTH SEMESTER - CAD PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Computers 15 Nos 100
TOTAL MARKS: -- -- -- -- 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 104
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF FACULTY AND SUPPORTING STAFF FOR THE FOLLOWING NUMBER OF COURSES, DIVISIONS AND INTAKE
FULL TIME – I SHIFTIII YEAR II YEAR I YEAR
Sanctioned intake for2013-14
Sanctioned intake for2014-15
Sanctioned intake for2015-16
No. Courses
1 Civil 60 60 602 Mechanical 60 180 1803 EEE 60 60 604 ECE 60 60 605 Automobile 60 60 60
TOTAL INTAKE 300 420 420No. of Divisions 5 7 7No. of Courses 5 5 5
TYPICAL EXAMPLE FOR REQUIREMENT OF FACULTY, LIBRARIAN & PHYSICAL DIRECTOR YEARWISE REQUIREMENT OF FACULTY
Year III Year II Year I YearSanctioned Intake 300 420 420Faculty student ratio required
1:20 1:20 1:20
Faculty requirement 15 21 21Total faculty 57Librarian 1Physical Director 1
TYPICAL EXAMPLE FOR MINIMUM REQUIRMENT OF TECHNICAL SUPPORTING STAFF Year REQUIREMENT OF TECHNICAL
SUPPORTING STAFFCriteria for Technical Supporting staff requirement
Workshop Instructor : 1Skilled / Lab Assistant : One Lab Assistant for each Lab [as in odd semester]Unskilled Assistant : One Assistant for each Department
TYPICAL EXAMPLE FOR MINIMUM REQUIREMENT - MINISTERIAL / ADMINISTRATIVE STAFF
Year REQUIREMENT OF MINISTERIAL / ADMINISTRATIVE STAFF
Criteria for Ministerial staff As per Institutions requirement – Can be in the cadre of Superintendent, Assistant & Typist - Minimum 3 is
desiredMinisterial / Admin. Staff Minimum 3 is desired
TYPICAL EXAMPLE FOR MINIMUM REQUIREMENT OF BASIC SERVANTSYear REQUIREMENT OF BASIC SERVANTS
Criteria for Basic Servants As per Institutions requirement - Can be in the cadre of Office Assistant, Watchman, Sweeper & Sanitary
Worker - Minimum 4 is desired
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 105
Basic Servants Requirement Minimum 4 is desired
CRITERIA & TYPICAL EXAMPLE FOR REQUIRMENT OF LIBRARY BOOKS
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF TITLES OF BOOKS IN LIBRARY YEARWISE REQUIREMENT OF TITLE OF BOOKS IN LIBRARYYear
III Year II Year I YearNo. of Courses 5 5 5Criteria for requirement ofTitles of Books
25 Titles of Books for
each course
25 Titles of Books for
each course
50 Titles of Books Fixed for whole First year
Titles of Books 125 125 50Grand Total 300
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF VOLUMES OF BOOKSYEARWISE REQUIREMENT OF VOLUME OF BOOKS IN LIBRARY
Year III Year II Year I YearNo. of Divisions 5 7 7Criteria for requirement ofVolumes of Books
125 Volumes of Books for each
division in III Year
125 Volumes of Books for each
division in II Year
250 Volumes of Books for each
division in I Year
Volumes of Books 625 875 1750Grand Total 3250
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF JOURNALS IN LIBRARYYEARWISE REQUIREMENT OF JOURNALS IN LIBRARY
Year III Year II Year I YearNo. of Divisions 5 7 7Criteria for requirement ofJournals
1 Journal per division
1 Journal per division 1 Journal per division
No. of Journals 5 7 7Grand Total 19
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal:
Page | 106
TYPICAL EXAMPLE FOR ACADEMIC INFRASTRUCTUREFULL TIME – I SHIFT
III YEAR II YEAR I YEARSanctioned intake for 2013-14 Sanctioned intake for 2014-15 Sanctioned intake for 2015-16
No. Courses
1 Civil 60 60 602 Mechanical 60 180 1803 EEE 60 60 604 ECE 60 60 605 Automobile 60 60 60
TOTAL INTAKE 300 420 420No. of Divisions 5 7 7No. of Courses 5 5 5
Number requiredNo
Instructional Area[RCC] III Year II Year I Year Total
Required Area / room
in Sq.m
Area(Sq.m)
1 Class Room (1 / Division) 5 7 7 19 66 12542 Tutorial Hall One fourth of number of class rooms required 5 33 1653 Workshop 1 200 2003 Laboratory 30 66 19804 Additional Workshop
As per AICTE norms(If Additional Workshop is available, Lab area may be reduced )accordingly) --- 200 ---
5 Computer Centre 1 100 1006 Drawing Hall 1 132 1327 Library 1 300 3008 Seminar Hall 1 132 132
TOTAL INSTRUCTIONAL AREA REQUIRED 59 4263
No Administrative Area [RCC] Number
requiredArea/ room
in Sq.mArea
(Sq.m)1 Principal Room 1 30 302 Board Room 1 20 203 Office Room 1 150 1504 Department Office =1 Dept office of 20 Sq.m area for each course 5 20 1005 HOD cabin =1 HOD cabin of 10 Sq.m area for each course 5 10 506 Faculty room - I Yr =5 Sq.m Faculty room area for each I Year faculty 1 or more 5/faculty 1057 Faculty room - II Yr =5 Sq.m Faculty room area for each II Year faculty 1 or more 5/faculty 1058 Faculty room - III Yr =5 Sq.m Faculty room area for each III Year faculty 1 or more 5/faculty 759 Central Stores 1 30 30
10 Maintenance Room 1 10 1011 Security Room 1 10 1012 House Keeping 1 10 1013 Pantry for staff 1 10 1014 Exam Office 1 30 3015 Placement office 1 30 30
TOTAL ADMINISTRATIVE AREA REQUIRED 23 765
No Amenities Area [RCC] Number required
Area/ room in Sq.m
Area(Sq.m)
1 Gents Toilet 1 75 752 Ladies Toilet 1 75 753 Boys common room 1 75 754 Girls common room 1 75 755 Cafeteria 1 150 1506 Stationary Store & Reprography 1 10 107 First Aid cum Sick room 1 10 10
TOTAL AMENITIES AREA REQUIRED 7 470