TM0/TMA 2.45GHz Closed Frame Magnetron Heads … a magnetron, with power and characteristics depending from head model (look at table); - a filament transformer; - a thermoswitch to

2,45 GHz MAGNETRON HEADS

CLOSED FRAME

WATER COOLED (TM0)AIR COOLED (TMA)

TMx09: 900 WTMx12: 1200 WTMx15: 1500 WTMx20: 2000 WTMx3x: 3000 W

TECHNICAL NOTE(issue: March 2014)

TM0 -TMA

TM0 - TMA

File: TM-TMA_r7 - July 2010 - Manuale per: TM-TMA page 1 of 15

PM 250 TM0 - TMA

(Cover Rear)

TM0 - TMA


PM 250 TM0 - TMA

Dichiarazione CE di ConformitàCE Declaration of Conformity

Manufacturer’s Name:: ALTER s.r.lNone del costruttore:

Manufacturer’s Address: Via P. M. Curie, 8 - 42122 Reggio Emilia - ItalyIndirizzo del costruttore:

Declare that the product: Dichiara che il prodotto:

product name: Generatore di microonde (testa) TMA e TM0 nome del prodotto: Microwave remotable head TMA and TM0

models: TMA09,TM009, TMA12, TM012, TMA15, TM015, modelli: TMA20, TM020, TMA31, TM030, TM031

The product described above is in conformity with the provision of the following European Directives:Il prodotto sopra descritto è in conformità con le seguenti Direttive Europee:

2006/95/CE Harmonization of the laws of the member States relating to electrical equipment designed for use within certain voltage limits Riavvicinamento delle legislazioni degli Stati membri relative al materiale elettrico destinato ad essere adoperato entro taluni limiti di tensione

2004/108/CE Harmonization of the laws of the member States relating to electromagnetic compatibility Riavvicinamento delle legislazioni degli Stati membri relative alla compatibilità elettromagnetica Conformity to the Directives is assured through the application of the following standards:La conformità alle Direttve è assicurata tramite l’applicazione dei seguenti standards:

Reference number Edition Description Numero di riferim Edizione Descrizione EN61010-1 2011-03 Safety requirements for electrical equipment for measurement, control and laboratory use Prescrizioni di sicurezza per apparecchi elettrici di misura, controllo e per uso in laboratorio

EN61000-6-4 2007-11 Electromagnetic compatibility - Generic emission standard, industrial environment Compatibilità elettromagnetica - Norma generica sull’ emissione, ambiente industriale EN61000-6-2 2006-10 Electromagnetic compatibility - Generic immunity standard, industrial environment Compatibilità elettromagnetica - Norma generica sull’ immunità, ambiente industriale

EN55011 2009-03 Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic distur bance characteristics - Limits and methods of measurement Apparecchi a radiofrequenza industriali, scientifici e medicali (ISM) - Caratteristiche di radio disturbo - Limiti e metodi di misura

Reggio Emilia, March 2014. Marco Garuti

General Manager

page 2 of 15 File: TM-TMA_r8 - March 2014 - Manuale per: TM-TMA

PM 250 TM0 - TMA TM0 - TMA


PM 250 TM0 - TMA

Alter’ policy about Reduction on Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE)

Law Reference• Directive 2002/96/EC of European Parliament (WEEE)• Directive 2002/95/EC of European Parliament (RoHS)• Decreto Legislativo D.L. n. 151 – 25/07/2005 (WEEE and RoHS)

At the present date 99% of components in our stock is RoHS compliant.The components still not compliant are hold in stock and still used because there is not the same or equivalent product RoHS compliant, or because the product is a spare part for equipment produced and put on market before 1st July 2006.

Alter Risk Assessment on RoHS

Of the six substances forbidden from electronic equipment (Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Cromium (Cr-VI), Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE)) only two may be present in Alter’s current manufacturing process, Pb and Cr-VI, of whose lead is the more important.

Cr-VI: No more used. May be present within the limit of 0,1% in weight as set by Directive.Lead: We are already using alternative alloys lead-free, but as we still have few components that cannot be soldered

without lead, we have to use some lead-alloy for welding. We are putting any effort on reducing lead weight within 0,1% of products as set by Directive.

Important information to User about disposal, recycling, reuse of this electronic equipment at the end of its useful life (WEEE Directive).

According to Annex IA and IB of EC Directive 200/96/EC this equipment is not included on the list of categories/products covered by the Directive (as a matter of fact it does not perform a function alone, must be included into a larger process equipment and it’s for stationary use).Nevertheless we invite the User to respect the following Directive rules:

• this WEEE is not a municipal waste and should be collected separately according to rules of your country

• the symbol means that this WEEE cannot be disposal in the same place and in the same way like municipal waste

• this WEEE may present risk for environment as well as for person in case of disposal in unauthorized place, due to content of hazardous substances

• for disposal of this WEEE in unauthorized area the User may be charged with a fine or prosecuted by law.

Rev. Note di revisione Data File0 First emission January 2001 TM-TMA_rz1 Internal use (new lay-out) June 2002 TM-TMA_r12 ILME connectors and versions 50, 51, 52, 53 January 2003 TM-TMA_r23 Flow switch 1 and 2 L/min March 2003 TM-TMA_r34 Hitachi magnetron: TMA31 - TM031 June 2003 TM-TMA_r45 Corrections to the text and version 40 March 2006 TM-TMA_r56 Wiring diagram version 41 January 2007 TM-TMA_r67 Update norms reference July 2010 TM-TMA_r78 Update norms reference & logo March 2014 TM-TMA_r8




PM 250 TM0 - TMA

ContentsCCE Declaration 1Components list 10

EEnvironmental conditions 6Equipment ratings 6

GGeneral Informations 4General description and ratings 5

HHow to order 15

PPhysical specifications 5Pin-out of the connectors ver. 40 12Pin-out of the connectors ver. 41 13Pin-out of the connectors ver. 51 14

RRoHS conformity 2

TTable of the models 8, 9Technical assistance 15TM0: drw of the water cooled 11TMA: drw of the air cooled 7

WWarnings 4Wiring diagram filament transformers 6

Indice AAssistenza tecnica 15Avvertenze 4Avvertenze Generali 4

CCaratteristiche meccaniche 5Caratteristiche elettriche 6Condizioni ambientali di utilizzo 6

DDescrizione e specifiche 5Dichiarazione CE di conformità 1

EElenco componenti 10

MModalità d'ordine 15

PPin-out connettori ver. 40 12Pin-out connettori ver. 41 13Pin-out connettori ver. 51 14

RRoHS conformità normative CE 2

SSchema di collegamento trasformatori del filamento 6

TTabella dei modelli 8, 9TM0: modelli ad acqua, disegno 11TMA: modelli ad aria, disegno 7

Note: in this manual the terms equipment, magnetron head and microwaves head are used as synonymous.




PM 250 TM0 - TMA

General InformationsThese magnetron heads satisfy the European Standard EN 61010-1.

With reference to EN 61010-1 standard, note:these magnetron heads must be installed and serviced only by qualified personnel.The magnetron heads must only be used by persons acquainted with the regulations covering the application.

The magnetron heads described in this manual have been classified as industrial, scientific and medical (ISM) ra-dio-frequency equipment and the related standard for the Electromagnetic disturbance is the EN55011 (Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement.)

With reference to Basic Standard EN55011, these magnetron heads are included into Group 2 (Microwave generators, Thyri-stor command equipment, Welding equipment, Induction heating equipment or machine, Microwave industrial oven, etc.), Class A (industrial environment): for this reason these magnetron heads shall not be used in the residential, commercial and light-indu-strial environment.

The TMAxx and the TM0xx, when properly installed, comply with the limits of radio disturbance characteristic of a Group2, Class A equipment as stated by EN55011.

A copy of the tests performed may be sent on request. Note that these tests cannot be used as a conformity certificate of the user’s final equipment.

WARNINGS

The TMAxx & TM0xx are powered by AC main line and high voltage (approx 4 kVdc): carefully read this manual before using. Insure correct connections and use.

Failure to comply with the instructions enclosed in this manual may serious injuries to personnel responsible for checking and using the magnetron head, and the risk of general mal-functions of the magnetron head itself.

Avvertenze GeneraliI generatori di microonde della serie TMA/TM0 sono conformi alla Norma Europea EN 61010-1.

Come previsto da tale norma l'apparecchiatura deve essere installata e utilizzata solo da personale qualificato e informato sulle precauzioni e modalità d'uso.

L'apparecchiatura descritta nel presente manuale è una apparec-chiatura ISM, cioè destinata ad utilizzare o generare sul posto energia a radiofrequenza per usi industriali, scientifici, medicali, domestici o similari e la Norma per i limiti di emissione elettroma-gnetica è la EN55011:"Apparecchi a radiofrequenza industriali, scientifici e medicali (ISM) - Caratteristiche di radiodisturbo - Limiti e metodi di misura".

Con riferimento alla norma EN55011, i generatori TMA/TM0 sono classificati fra le apparecchiature del Gruppo 2 (Generatori di microonde, Apparecchiature con comando a tiristori, Saldatrici, Macchine e dispositivi di riscaldamento a induzione, Forni indu-striali a microonde, ecc.), nella Classe A (ambiente industriale): per tale ragione essi non possono essere utilizzati in altri ambienti a meno di verificarne l'idoneità alle relative norme.

I generatori sono conformi ai limiti di radiodisturbo previsti per apparecchiature di Gruppo 2, Classe A previsti dalla norma EN55011.

Copia dei tracciati di prova possono essere inviati a seguito di specifica richiesta.Si sottolinea come tale conformità non possa essere utilizzata in sostituzione di quella che il Costruttore finale deve produrre per certificare la conformità della propria macchina.

AVVERTENZE

I generatori TMAxx e TM0xx sono alimentati sia a tensione di rete (c.a 230 Vac) sia ad alta tensione (c.a 4 kVcc): leg-gere attentamente il presente manuale prima di installare l'apparecchiatura. Accertarsi che il collegamento elettrico e l'uso siano corretti.Il mancato rispetto delle istruzioni comporta seri rischi per il personale addetto all'utilizzo e controllo dell'apparecchiatura, così come la possibilità di provocare guasti alla stessa.




PM 250 TM0 - TMA

General Description and RatingsThe TMxxx magnetron head may be easily powered by the SM/CM series switch mode power supply which may be pla-ced at a remote place: the power supply provides monitoring for all operating situations and manages the alarm conditions.The head is available as air cooled type (=TMA...) and as water cooled type (=TM0...); both types are manufactured in six versions:the version 40 consists of the following:- an aluminum WR 340 waveguide launcher with flange style PDR26;- a magnetron, with power and characteristics depending from head model (look at table);- a filament transformer;- a thermoswitch to protect the magnetron;- electrical connections by means of plugs and sockets, with the exception of the high voltage anode cable which is con-nected directly to the magnetron; the connector of the control signals is separate from those of main line;- a centrifugal fan (on air cooled type);- a removable aluminium cover;the version 41 is special and has a single socket for connec-tionsthe version 50 has the following parts added to ver. 40:- a microswitch on cover;- an arc detector installed on waveguide launcher;- an air filter (on air cooled type);the version 51 has the following further components (compa-red to ver. 50): - an air pressure switch (on air cooled type) or water flow switch (on water cooled type);- an orange lamp on the rear cover, indicating power on;the version 52 has the high voltage socket added to ver. 50;the version 53 has the high voltage socket added to ver. 51

TM0xx-TMAxx Physical specifications

Output flange: PDR26TM0 Overall size (water cooled): mm 218x233x305TMA Overall size (air cooled): mm 218x233x390 Water cooling specifications:Cooling system: operating pressure, max 5 bar inlet temperature 20°C÷30°CFlow rate > 1 L/min for: TM0 09-12-15-20Flow rate > 2 L/min for: TM0 30-31Use of 50 micron filtration is recommended. Degree of protection: IP 20Total weight (magnetron incl.):

TM0 09-12 10 Kg (22 lbs) TM0 15-20-30-31 11 Kg (22 lbs) TMA 09-12 13 Kg (28 lbs) TMA 15-20-31 14 Kg (30 lbs)

Descrizione generale e specificheIl generatore TMxxx è facilmente collegabile ad un alimentatore della serie SM/CM e può essere posizionato anche a distanza: l'alimentatore provvede a controllarne tutte le funzioni e a gestire le eventuali situazioni di allarme. I generatori sono disponibili sia con raffreddamento ad aria (=TMA...) che con raffreddamento ad acqua (=TM0...) e ven-gono offerti in sei versioni:la versione 40 comprende le seguenti parti:- una guida di lancio in alluminio di sezione secondo lo standard WR340, con flangia terminale tipo PDR 26;- un magnetron, di potenza e caratteristiche che dipendono dal tipo di generatore (vedi tabella riassuntiva);- un trasformatore di alimentazione del filamento;- un interruttore termico di protezione del magnetron;- connettori scollegabili e separati per i segnali di comando/controllo e linea di alimentazione, con l’eccezione del cavo di alta tensione “anodica” che deve essere collegato direttamente sul magnetron;- una ventola centrifuga (nei generatori raffreddati ad aria);- un coperchio smontabile in alluminio.la versione 41 ha un solo connettore di collegamento (special)la versione 50 ha i seguenti componenti, in aggiunta alla vers. 40:- un microinterruttore sul coperchio;- un sensore di arco elettrico in guida;- un filtro aria di ingresso (nei generatori raffreddati ad aria);la versione 51 ha i seguenti componenti aggiunti alla vers. 50:- un pressostato aria (nei modelli raffreddati ad aria) o un flus-sostato (nei modelli raffreddati ad acqua);- una spia arancione, installata sul retro del coperchio, che indica l'emissione di microonde;la vers. 52 ha il connett. di alta tensione aggiunto alla vers. 50la vers. 53 ha il connett. di alta tensione aggiunto alla vers. 51

TM0xx-TMAxxCaratteristiche meccaniche

Flangia d'uscita: PDR26Dim. testa raffreddata ad acqua: mm 218x233x305Dim. testa raffreddata ad aria: mm 218x233x390 Specifiche del sistema di raffreddamento ad acqua:Circuito di raffreddamento: pressione max 5 bar, temperatura ingresso acqua 20°C÷30°CPortata acqua > 1 L/min per teste: TM0 09-12-15-20Portata acqua > 2 L/min per teste: TM0 30-31E' raccomandato un filtro da 50 micron in ingresso.Grado di protezione: IP 20Peso totale (con magnetron):

TM0 09-12 10 Kg (22 lbs) TM0 15-20-30-31 11 Kg (22 lbs) TMA 09-12 13 Kg (28 lbs)

TMA 15-20-31 14 Kg (30 lbs)




PM 250 TM0 - TMA

Equipment RatingsInput voltage of look at voltage indication onfilament trafo: head's label. To modify pls look at filament transformer schematicFan input: 0.5A - 230VACLamp input: 230VACLoad of thermoswitchcontact: 1A - 250VLoad of water flowswitch contact: 130mA - 50VLoad of air flowswitch contact: 1A - 250VLoad of microswitchcontact: 1A - 250VAC 250mA - 250VDCArc detector output: see diagram page 12

Environmental conditions Use: indoor use onlyAltitude: tested up to 2,000 m (6,000 feet)Temperature: 5°C to 40°C (41°F to 104°F)Relative Humidity: 80% for temperature up 31°C (88°F), decreasing linearly to 50% RH at 40°C (104°F) Pollution degree: 2, according to IEC664

Caratteristiche elettricheAlimentazione del trasfor- tensione di alimentazionematore del filamento: indicata sulla testa, (per tensioni differenti vedere schemi)Alimentazione della ventola: 0,5A - 230VACAlimentazione della lampada: 230VACPortata del contatto delthermoswitch del magnetron: 1A - 250VPortata del contatto delflussostato: 130mA - 50VPortata del contatto delpressostato: 1A - 250VPortata del contatto delmicroiterruttore carter: 1A - 250VAC 250mA - 250VDCCollegamento arc detector: vedere schema pag.12

Condizioni ambientali di utilizzoModalità d’uso: solo internoAltitudine: collaudato fino a 2.000 mTemperatura: da 5° a 40°CUmidità Relativa: 80% fino a 31°C, decre mento lineare al 50% a 40°CGrado d’inquinamento: 2, in conformità a IEC664

Wiring diagram of filament transformers Schema di collegamento trasformatori del filamento




PM 250 TM0 - TMA

COMPONENTS LAYOUT

Air cooled microwave generator up to 2 kW

Air cooled microwave generator 3 kW - TMA31




PM 250 TM0 - TMA

Available Models Table Tabella riassuntiva dei modelli

POWER 900 W 1200 Wcooling air water air water

version 5+ 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3

n = present

TM

A09.xxx5

0

TM

A09.xxx5

1

TM

A09.xxx5

2

TM

A09.xxx5

3

TM

009.xxx5

0

TM

009.xxx5

1

TM

009.xxx5

2

TM

009.xxx5

3

TM

A12.xxx5

0

TM

A12.xxx5

1

TM

A12.xxx5

2

TM

A12.xxx5

3

TM

012.xxx5

0

TM

012.xxx5

1

TM

012.xxx5

2

TM

012.xxx5

3

Basic Components

Magnetron 2M107/167,air cooled l l l l

Magnetron 2M107,water cooled l l l l

Magnetron 2M137, air cooled l l l l

Magnetron YJ1540-6, water cooled l l l l

Magnetron NL10254-1,air cooled

Magnetron NL10254-18, water cooled

Thermoswitch l l l l l l l l l l l l l l l l

Filament Transformer l l l l l l l l l l l l l l l l

Fan l l l l l l l l

Arc Detector l l l l l l l l l l l l l l l l

Microswitch on cover l l l l l l l l l l l l l l l l

Flow-switch FS-4 GEMS 1l/min l l l l

Pressure-switch LGW 3 A2 IP54 l l l l

Lamp (orange, neon type) l l l l l l l l

H.V. Connector l l l l l l l l

Note: la versione 40 utilizza solo i componenti evidenziati; le altre versioni i componenti come da tabella version 40 includes only marked components in light blue; other versions include components as indicated in the table.




PM 250 TM0 - TMA

Available Models Table Tabella riassuntiva dei modelli

POWER 2000 W 3000 W 6000 Wcooling air water air water water

version 5+ 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 1* 2

n = present

TM

A20.xxx5

0

TM

A20.xxx5

1

TM

A20.xxx5

2

TM

A20.xxx5

3

TM

020.xxx5

0

TM

020.xxx5

1

TM

020.xxx5

2

TM

020.xxx5

3

TM

A31.xxx5

0

TM

A31.xxx5

1

TM

A31.xxx5

2

TM

A31.xxx5

3

TM

030.xxx5

0

TM

030.xxx5

1

TM

030.xxx5

2

TM

030.xxx5

3

TM

031.xxx5

0

TM

031.xxx5

1

TM

031.xxx5

2

TM

031.xxx5

3

TM

060.xxx1

TM

060.xxx2

Basic Components

Magnetron NL10250-2, air cooled l l l l

Magnetron NL10250-3A, water cooled l l l l

Magnetron 2M251/2M265, air cooled l l l l

Magnetron NL10230, water cooled l l l l

Magnetron 2M252, 2M265WJ, water cooled l l l l

Magnetron YJ1600B/C, water cooled l l

Thermoswitch l l l l l l l l l l l l l l l l l l l l l l

Filament Transformer l l l l l l l l l l l l l l l l l l l l l l

Fan l l l l l l l l l l

Arc Detector l l l l l l l l l l l l l l l l l l l l l l

Microswitch on cover l l l l l l l l l l l l l l l l l l l l l l

Flow-switch FS-4 GEMS 1l/min l l

Flow-switch FS-4 GEMS 2l/min l l l l l l

Pressure-switch LGW 3 A2 IP54 l l l l

Lamp (orange, neon type) l l l l l l l l l l

H.V. Connector l l l l l l l l l

Note: la versione 40 utilizza solo i componenti evidenziati; le altre versioni i componenti come da tabella version 40 includes only marked components in light blue; other versions include components as indicated in the table. *: the versions for TM060 are still named no. 1 and 2 (not 51 or 52)




PM 250 TM0 - TMA

Components list Elenco componenti

Pos Q.ty Description P/N Note1 1 Grid AR3322200 Only on TMAxx ver. > 50

2 1 Centrifugal fan VEVC100 Only on TMAxx

3 1 Flow-switch FS-4 1L / MIN PN0200255 Only on ver. 51-53

3 1 Flow-switch FS-4 2L / MIN PN0200256 Only on ver. 51-53

4 1 Pressure-switch LGW 3 A2 PNLGW3A2 Only on ver. 51-53

5 1 Arc detector 86AD1601 Only ver. > 50

6

1 Magnetron 900 W water cooled MW2M107A/795WCA TM0 09

1 Magnetron 900 W air cooled MW2M244/2M167 TMA 09

1 Magnetron 1200 W water cooled MWYJ1540/6 TM0 12

1 Magnetron 1200 W air cooled MW2M137M1 TMA 12

1 Magnetron 2000 W water cooled MW2M130W TM0 20

1 Magnetron 2000 W air cooled MW2M130 TMA 20

1 Magnetron 3000 W water cooled (compact version) MWN10230/6-14 TM0 30

1 Magnetron 3000 W water cooled MW2M265WJ TM0 31

1 Magnetron 3000 W air cooled MW2M25105/2M265 TMA 31

71 Thermoswitch 100°C NC THR20183 Only on TMAxx

1 Thermoswitch 63°C NC Assembled on magnetron TM0xx

81 Filam. transformer for 0.9 kW magnetron 42FIL35F

1 Filam. transformer for 1.2 kW magnetron 42FIL65F

1 Filam. transformer for 2 & 3 kW magnetron 42FIL100F

91 Elbow socket CNCKA03IA CONN # 1

1 5 male pin carrier CNCKM04 CONN # 1

10

1 Elbow socket CNCKA03IA CONN # 2 (no ver.41)

1 8 male pin carrier CNCDM07 CONN # 2 (no ver.41)

11 1 Microswitch FCDZ10GW Only ver. > 50

121 Sheath clamp CA0082901 Vers. 50, 51

1 H.V. Socket, Lemo MOERAY410CTA Vers. 52, 53

13 1 12mm Hose connector

14 1 Lamp Only on ver. 51,53




PM 250 TM0 - TMA

Water cooled microwave generator up to 3 kW *

Water cooled microwave generator 3 kW - TM031




PM 250 TM0 - TMA

Pin connections of connectors Pin-out connettori




PM 250 TM0 - TMA

Pin connections of connectors Pin-out connettori




PM 250 TM0 - TMA

Pin-out connettoriPin connections of connectors




PM 250 TM0 - TMA

Modalità d'ordineGeneratori remoti: TM k xx ccc jj, dove:

k (tipo raffredd.): 0 = raffreddato ad acqua A = raffreddato ad aria

xx (potenza magnetron): 09 = 900 W 12 = 1200 W 15 = 1500 W 20 = 2000 W 30 - 31 = 3000 W

ccc (codice cliente): codice di fabbrica usato per la personalizzazione, non presente sull'etichetta

jj (versione): 40 = senza sensori 41 = 1 connettore di colleg. 50 = base 51 = funzioni aggiunte 52 = base con connettore A.T. 53 = funzioni aggiuntive con connettore A.T. (vedi tabella riassuntiva)

Trasformatori filamento: FIL35F = trasformatore per CM340 e magnetron 2M107 FIL65F = trasformatore per SM445 e magnetron 2M137 o YJ1540 FIL100F = trasformatore filamento per magnetron da 2kW e da 3kW Cablaggi: Sono disponibili cablaggi comple ti preconfezionati per collegare in modo semplice e rapido la testa TMx con uno dei nostri alimentto ri della serie SM445-745-840- 1050-1150, CM340-440. I cablaggi sono disponibili in lunghezza standard di 3mt: altre lunghezze a richiesta.

How to orderMicrowave heads: TM k xx ccc jj, where:

k (cooling type): 0 = water cooled A = air cooled

xx (magnetron power): 09 = 900 W 12 = 1200 W 15 = 1500 W 20 = 2000 W 30 - 31 = 3000 W

ccc (custom code): Factory code used for custo mizing each unit, not present on equipment label

jj (version): 40 = sensor less 41 = single socket (special) 50 = basic 51 = added features 52 = basic with H.V. conn. 53 = added features with H.V. connector (see “Available Models Table”) Filament transformers: FIL35F = filament trafo for CM340 and magn. 2M107 FIL65F = filament trafo for SM445 and magn. 2M137 or YJ1540 FIL100F = filament trafo for 2kW and 3kW magnetron Cable sets: Several complete cable sets are available to provide easy and fast set-up of the head TMx with one of the related power supply type SM445-745-840-1150-1050, CM340-440. The cable sets have standard lenght of 3 mt: other lenghts on request.

Alter reserves the right to improve or modify this products, at any time, without obligation to notify any person or entity of such changes.No part of this publication may be reproduced without the express written consent of Alter. All rights reserved.

La Alter si riserva il diritto di apportare miglioramenti o modi-fiche al prodotto descritto nel manuale in qualsiasi momento e senza preavviso.Questa pubblicazione non può essere riprodotta senza il con-senso scritto di Alter. Tutti i diritti sono riservati.

Technical Assistance / Assistenza TecnicaAlter srl

42122 Reggio Emilia -ITALY phone ++39 0522 553 820; fax ++39 0522 553 577

Web: www.altersystem.com

Documents

TM0/TMA 2.45GHz Closed Frame Magnetron Heads … a magnetron, with power and characteristics depending from head model (look at table); - a filament transformer; - a thermoswitch to