Upload
madelynn-brackley
View
219
Download
2
Tags:
Embed Size (px)
Citation preview
The TUNING Methodology
TechnoTN 2004
Brussels, 13 February 2004
Dr. Julia González - Vice-rector for International Relations - University of Deusto
The TUNING project is a project by and for universities.
It is the Universities’ response to the challenge of the
Bologna Declaration
TUNING MOTTO
Tuning of educational structures and programmes on the
basis of diversity and autonomy
WHY TUNING?
The objectives: To implement the Bologna - Prague - Berlin process on university
level To find ways to implement two cycles To identify common reference points from discipline and university
perspective To develop professional profiles and comparable and compatible
learning outcomes To facilitate employability by promoting transparency in educational
structures (easily readable and comparable degrees) To develop a common language which is understood by all
stakeholders (Higher education sector, employers, professional bodies)
Degree structure: adoption of a system essentially based on two main cycles
“Ministers encourage the member States to elaborate a framework
of comparable and compatible qualifications for their higher
education systems, which should seek to describe qualifications in
terms of workload, level, learning outcomes, competences and
profile. They also undertake to elaborate an overarching framework
of qualifications for the Higher Education Area.”
Berlin Communiqué(19 September 2003)
TUNING METHODOLOGY: learning outcomes and competences
General tendencies in higher education:
Shift of paradigm: moving from a staff oriented approach to a student
centred approach
Less specialised academic education in the first cycle
More flexibility in first and second cycle programmes
What should a student know, understand and be able to do to
be employable?
The Tuning Methodology
Line 1: Generic competences Consultation with graduates, employers and academics on the importance of 30 generic competences and an evaluation of how well HE institutions develop them.
Line 2: Subject specific competences (knowledge, understanding and skills)
Mapping of subject areas and development of common reference points and subject specific competences of each of the pilot disciplines.
Line 3: ECTS as a European credit accumulation system: new perspectivesDevelopment of ECTS as a tool for programme design: basis is student workload measured in time.
Line 4: Mapping of approaches to teaching / learning and assessment in different countries
Line 5: Quality enhancement
Why Focus on competences?
1. Further transparency of professional profiles in study
programmes and emphasis on learning outcomes
2. Shift to a more learner oriented approach to education
3. Growing demands of a lifelong learning society which requires
more flexibility
4. Need for higher levels of employability and citizenship
5. Enhancement of the European dimension of Higher Education
6. Need for a shared language for consultation with all stakeholders
FOCUS ON GENERIC COMPETENCES (GENERAL ACADEMIC SKILLS)
TARGET GROUPS:
• GRADUATES• EMPLOYERS• ACADEMICS
WHAT ARE THE MOST IMPORTANT COMPETENCES TO BE EMPLOYABLE INDEPENDENT OF ONE’S SUBJECT AREA?
ARE THESE ACTUALY TAUGHT AND TO WHAT EXTENT?
THE TUNING QUESTIONNAIRE
TYPES OF COMPETENCES MEASURED:• Instrumental competences: cognitive abilities, methodological
abilities, technological abilities and linguistic abilities• Interpersonal competences: individual abilities like social
skills (social interaction and co-operation)• Systemic competences: abilities and skills concerning whole
systems (combination of understanding, sensibility and knowledge; prior acquisition of instrumental and interpersonal competences required)
THE TUNING QUESTIONNAIRE
TYPES OF COMPETENCES MEASURED:Instrumental competences:• Capacity for analyses and synthesis• Capacity for organisation and planning• Basic general knowledge• Grounding in basic knowledge of the profession• Oral and written communication in your native language• Knowledge of a second language• Elementary computing skills• Information management skills (ability to retrieve and analyse
information from different sources)• Problem solving• Decision-making
THE TUNING QUESTIONNAIRE
TYPES OF COMPETENCES MEASURED:
Interpersonal competences:
• Critical and self-critical abilities• Teamwork• Interpersonal skills• Ability to work in an interdisciplinary team• ability to communicate with experts in other fields• Appreciation of diversity and multiculturality• Ability to work in an international context• Ethical commitment
THE TUNING QUESTIONNAIRE
TYPES OF COMPETENCES MEASURED:Systemic competences:• Capacity for applying knowledge in practice• Research skills• Capacity to learn• Capacity to adapt to new situations• Capacity for generating new ideas (creativity)• Leadership• Understanding of cultures and customs of other countries• Ability to work autonomously• Project design and management• Initiative and entrepreneur spirit• Concern for quality• Will to succeed
THE TUNING QUESTIONNAIRE
Methodology and Results
Cluster sampling:
University 1
Respondents
University 2
Respondents
University 3
Respondents
University 100
Respondents
University 101
Respondents
...
...
Procedure of sample selection
- Graduates- Employers- Academics
RESPONDENTS
FINAL SAMPLE
7 Areas & 101 university depart. & 16 Countries Business Geology History Mathematics Physics Education Chemistry
Total number of respondents: 5183 Graduates 944 Employers 998 Academics
Data
Austria Belgium Denmark Finland France Germany Greece Iceland Ireland Italy Netherlands Norway Portugal Spain Sweden United Kingdon
Combin
ed ra
nking
: Firs
t ten
compe
tence
s
2Capacity for applying knowledge in practice
Instrumental
Interpersonal
Systemic
3
3
Capacity to adapt to new situations
Concern for quality
44
Information management skills
Ability to work autonomously
ResultsComparing Graduates and Employers
1
1
1
Capacity for analysis and synthesis
Capacity to learn
Problem solving
5Teamwork
6 Capacity for organisation and planning
Combin
ed ra
nking
: Las
t thr
ee co
mpeten
ces
ResultsComparing Graduates and Employers
Instrumental
Interpersonal
Systemic
18Understanding of cultures and
customs of other countries
Appreciation of diversityand multiculturality
17
16 Ability to work inan international
context
Results: Country effect
Will to succeedAbility to work autonomouslyKnowledge of a second language
Capacity for applying knowledge in practiceConcern for qualityInitiative and entrepreneurial spiritAbility to work in an interdisciplinary team
30 items
REMAINING 23 ITEMS
STRONG
MILD&
NO EFFECT
Fundamental Importance: Weighted Ranking of the Most Importance Competences. All Subjects
Graduates Employers Academics Capacity for
analysis and synthesis
Capacity to learn
Capacity for applying knowledge in practice
Elementary computing skills
Capacity to adapt to new situations
Capacity to learn
Capacity for applying knowledge in practice
Capacity for analysis and synthesis
Capacity to adapt to new situations
Interpersonal skills
Basic knowledge of the field of study
Capacity for analysis and synthesis
Capacity to learn Capacity for
generating new ideas (creativity)
Capacity for applying knowledge in practice
TUNING DEFINITIONS:
Competences: The Tuning Project focuses on subject specific competences and generic competences. These competences represent a dynamic combination of attributes, abilities and attitudes. Fostering these competences are the object of educational programmes.
Competences will be formed in various course units and assessed at different stages.
[competences are obtained by the student]
Tuning definitions
TUNING DEFINITIONS:
Learning outcomes: Statements of what a learner is expected to know, understand and/or be able to demonstrate after completion of learning. They can refer to a single course unit or module or else to a period of studies, for example, a first or a second cycle programme. Learning outcomes specify the minimum requirements for award of credit.
[learning outcomes are formulated by academic staff]
Tuning definitions
How are competences and learning outcomes related?
• Learning outcomes according to Tuning methodology should be formulated in terms of competences.
• Learning outcomes are minimum requirements of a unit or a programmes and are expressed in terms what the learner knows and is able to do at the end of the learning experience.
• Competences may be developed to a greater degree than the level required by the learning outcome.
Tuning definitions
TUNING METHODOLOGY: learning outcomes and competences
Steps in designing degrees:
1. Identification of social needs
2. Definition of academic and professional profiles: translation into
learning outcomes and generic and subject specific competences
3. Translation into curricula
4. Translation into modules and approaches towards teaching,
learning and assessment
5. Programme quality assurance: built in monitoring, evaluation and
updating procedures
A methodology for designing, planning and implementing curricula
Traditional methodology: developed in a national context largely for mono-
disciplinary study programmes intended for educating graduates with a traditional
profile focussing on knowledge and contentApproach: staff / teacher oriented compulsory subjects to be covered input oriented
A methodology for designing, planningand implementing curricula
Tuning approach: student centred definition of academic and professional profiles definition of learning outcomes identifying generic and subject specific competences output oriented curricula
Tuning methodology and model: appropriate for mono-disciplinary, inter- and multidisciplinary,
integrated and joint degree programmes valid for graduates with wide range of profiles focussing on competences
IDENTIFICATION OF SOCIAL NEEDS
CONSULTATION AT EUROPEAN LEVELLOCATION OF RESOURCES
EMPLOYERS AND OTHER STAKEHOLDERS
ACADEMIC COMMUNITY: COMMON REFERENCE POINTS
PROFESSIO-NALS AND PROFESSIO-NAL BODIES
DEFINITION OF ACADEMIC AND PROFESSIONAL PROFILES
TRANSLATION INTO DESIRED LEARNING OUTCOMES:
• GENERIC COMPETENCES
• SUBJECT SPECIFIC COMPETENCES
TRANSLATION INTO CURRICULA:
• CONTENT (KNOWLEDGE, UNDERSTANDING AND SKILLS)
•STRUCTURE (MODULES AND CREDITS)
APPROACHES TO TEACHING AND LEARNING
• ACADEMIC RESOURCES
• ORGANISATIONAL RESOURCES
• FINANCIAL RESOURCES
• STRATEGIC ALLIANCES WITH OTHER BODIES
TRANSLATION INTO EDUCATIONAL UNITS AND ACTIVITIES TO ACHIEVE DEFINED LEARNING OUTCOMES
ASSESSMENT
PROGRAMME QUALITY ASSURANCE
Tuning model for European comparable degrees
THE TUNING DYNAMIC QUALITY DEVELOPMENT CIRCLE
Definition of academic and professional profiles
Programme design: definition of learning outcomes / competences
Identification of resources
Construction of curricula: content and structure
Selection of teaching and learning approaches
Selection of types of assessement
Evaluation and improvement (on the basis of feed back and back forward)
Programme quality assurance
LEARNING OUTCOMES AND COMPETENCES IN STUDY PROGRAMMES
Professional profile
2nd. cycle
1st. cycle
Second cycle learning outcomes defined in terms of generic and subject specific competences
First cycle learning outcomes defined in terms of generic and subject specific competences
Professional profile
Course unit
LEARNING OUTCOMES AND COMPETENCES IN STUDY PROGRAMMES
Example Course unit/learning outcome Unit 1
Unit 2
CompetenceA B C D E F G H I F
x x
X = THIS COMPETENCE IS DEVELOPED AND ASSESSED AND IS MENTIONED IN THE LEARNING OUTCOME OF THIS UNIT
Unit 3
Unit 4
x x x
x x x
x x x
Thematic Networks and Tuning: How to adapt and how to adopt the
Tuning methodology?
Tuning envisages co-operation with Thematic Networks at three levels:
I. Exchange of Information
II. Cooperation as a Synergy Group
III. Cooperation as a Core Area
I. Exchange of Information
Aim: To collect information about Tuning by the TNP
Task: To ask for information from the Tuning coordinating team (by letter or e-mail).
When contacting TUNING, please include:
- Type of information requested: general presentation, emphasis on one aspect, possibility of initiating the project,etc.- Information about previous contacts with (a) Tuning representative(s).- Request for a Tuning counsellor.
II. Cooperation as a Synergy Group
Aim: Develop knowledge of Tuning Methodology with regard to some of the Tuning lines.
Task 1: Contact the Tuning coordination team and express interest in one or more particular line(s) of development.
Task 2: Decide on conditions of cooperation with Tuning and on the level of support expected from Tuning.
Task 3: Implement the methodology in the selected line(s). (See Cooperation as a Core Area)
III. Cooperation as a Core Area
Aim: Apply the Tuning Methodology along all five lines for the specific subject area of the Thematic Network.
Line 1 and 2: Generic and Subject Specific Competences
Objective: Develop academic and professional profiles for a degree programme within the
Thematic Network area. Identify the learning outcomes expressed in generic and subject specific competences.
Generic and Subject Specific Competences
Task 1: Obtain information on the findings and methodology of Tuning.
Task 2: Produce a Map of Professions in Europe in relation to the area.
Task 3: Choose a degree programme and debate how to find out the importance of generic competences for the degree chosen and select a number of competences from the Tuning list.
Task 4: Reflect and debate on Levels particularly in relation to First and Second Cycle
Task 5: Identify the most relevant generic competences for the subject area.
Task 6: Identify the most relevant subject specific competences, taking into account the input from professional bodies and graduates (stakeholders).
Generic and Subject Specific Competences
Task 7: Make a questionnaire with the most relevant subject specific competences and distribute it among academic colleagues in Europe.
Task 8: Send the set of completed questionnaires (minimum 250) to the coordination team for analysis.
Task 9: Discuss the outcomes in the TNP and with stakeholders.
Task 10: Write a final report; formulate the learning outcomes (European reference points) expressed in terms of competences by identifying the common, diverse and dynamic elements of the subject area. Distinguish the learning outcomes by level (first and second cycle).
Line 3: Use of ECTS as an accumulation system
Objective: To build up knowledge and experience on ECTS both as a transfer and accumulation system and to be able to
use it in curricula design and delivery in the specific subject area.
Task 1: Understanding of ECTS principles, tools and key features through awareness and group debate on ECTS key documents.
Task 2: Raise awareness of the relation between ECTS and the concept of learning outcomes and competences for curriculum design and development by using Tuning documentation.
Task 3: Identify methods for measuring workload in the subject area and compare these to the Tuning approach. Test
examples of good practice.Task 4: Write a report about the findings regarding the
implementation of ECTS as an accumulation system and the measuring of workload.
Line 4: Approaches to Teaching, Learning and Assessment
Objective: Obtain a deeper understanding of competence based -
student-centred learning and the impact it has on
approaches to teaching, learning and assessment.
Task 1: Choose a number of generic and subject specific
competences, relevant for the thematic area and debate how to implement them in curricula.
Task 2: Collect ideas and examples of good practice of teaching, learning and assessment methods regarding the implementation of generic and subject specific competences in degree programmes.
Task 3: Reflect on the outcomes of this exercise.
Task 4: Write a report on approaches to Teaching, Learning and Assessment in relation to the subject area.
Line 5 – Quality Enhancement
Objective: Develop an understanding of the Tuning methodology as an internal system of
quality assurance in relation to programme design and programme delivery.
Task 1: Raise awareness on the Tuning approach in relation to Quality assurance in programme
design and delivery.
Task 2: Apply this approach to the subject area.
Task 3: Write a report on the experiences.
Publication and Dissemination
- A report is envisaged at the end of the process for every Thematic Network which has completely followed the Tuning methodology.
This publication will consist of the reports of the different lines. It will be a joint publication.
(Tuning – X Thematic Network)
More information:
Tuning coordinating team
Contact persons:[email protected]@relint.deusto.es
Websiteshttp://europa.eu.int/comm/education/socrates/TuningProject http://www.relint.deusto.es/TuningProject/index.htmhttp://www.let.rug.nl/TuningProject/index.htm