Upload
rudolph-marshall
View
216
Download
0
Tags:
Embed Size (px)
Citation preview
The STED ...............The STED ...............
© Locus Consulting
Michael Flood Michael Flood BE FIEAust CPEng (Biomedical)BE FIEAust CPEng (Biomedical)
Locus Consulting Pty LtdLocus Consulting Pty Ltd
AUSTRALIAAUSTRALIA
June 2011June 2011
Has it been a success ???Has it been a success ???
In the beginning ..........In the beginning ..........
RecordsRecords• DesignDesign• ValidationValidation• VerificationVerification• Master fileMaster file
Quality management systemsQuality management systems
Manufacturing recordsManufacturing records• Incoming raw materialsIncoming raw materials• Manufacturing SOPS’sManufacturing SOPS’s• Inspection and testInspection and test• DistributionDistribution
© Locus Consulting
Master file Master file Technical file Technical file Design dossierDesign dossier
....................................... ??....................................... ??
© Locus Consulting
In the beginning ..........In the beginning ..........
The MDD .......... Annex II.4The MDD .......... Annex II.4
4. Examination of the design of the product4. Examination of the design of the product
4.14.1. In addition to the obligations imposed by Section 3, the . In addition to the obligations imposed by Section 3, the manufacturer must lodge with the notified body an manufacturer must lodge with the notified body an application for examination of the application for examination of the design dossier design dossier relating relating to the product which he plans to manufacture and which to the product which he plans to manufacture and which falls into the category referred to in Section 3.1falls into the category referred to in Section 3.1..
4.24.2. The . The application must describe the design, application must describe the design, manufacture and performances of the product manufacture and performances of the product in in question. question. It must include the documents needed to assess It must include the documents needed to assess whether the product conforms to the requirements of this whether the product conforms to the requirements of this Directive, as referred to in Directive, as referred to in Section 3.2 (c).Section 3.2 (c).
© Locus Consulting
3.23.2. Application of the quality system must ensure that the . Application of the quality system must ensure that the products conform to the provisions of this Directive products conform to the provisions of this Directive which apply to them at every stagewhich apply to them at every stage, from design to , from design to final inspectionfinal inspection. . All the elements, requirements and All the elements, requirements and provisions adopted by the manufacturer for his quality provisions adopted by the manufacturer for his quality systemsystem must be documented in a systematic and must be documented in a systematic and orderly manner in the form of written policies orderly manner in the form of written policies and procedures such as quality programmes, and procedures such as quality programmes, quality plans, quality manuals and quality quality plans, quality manuals and quality recordsrecords..
© Locus Consulting
The MDD .......... Annex II.3The MDD .......... Annex II.3
It shall include in particular an adequate description It shall include in particular an adequate description of:of:
(a) the manufacturer's quality objectives;(a) the manufacturer's quality objectives;
(b) the organization of the business and in particular:(b) the organization of the business and in particular:
• the organizational structures, the responsibilities the organizational structures, the responsibilities of the of the
managerial staff and their organizational authority where quality of managerial staff and their organizational authority where quality of design and manufacture of the products is concerned, design and manufacture of the products is concerned,
• the methods of monitoring the efficient operation of the the methods of monitoring the efficient operation of the quality system quality system and in particular its ability to achieve the desired and in particular its ability to achieve the desired quality of design and of product, including control of products which fail quality of design and of product, including control of products which fail to conformto conform; ;
© Locus Consulting
The MDD .......... Annex II.3 The MDD .......... Annex II.3 ..... Cont’d..... Cont’d
(c) the procedures for monitoring and verifying the (c) the procedures for monitoring and verifying the design of the products and in particular: design of the products and in particular:
• a general description of the producta general description of the product, , including any including any variants planned, variants planned,
• the design specifications, including the standards which the design specifications, including the standards which will be appliedwill be applied andand the results of the risk analysisthe results of the risk analysis, and , and alsoalso a description of the solutions adopted to fulfil the a description of the solutions adopted to fulfil the essential requirements essential requirements which apply to the products if the which apply to the products if the standards referred to in Article 5 are not applied in full, standards referred to in Article 5 are not applied in full,
• the techniques used to control and verify the design the techniques used to control and verify the design and and thethe processes and systematic measures processes and systematic measures which will be used which will be used when the products are being designed, when the products are being designed,
© Locus Consulting
The MDD .......... Annex II.3 The MDD .......... Annex II.3 ..... Cont’d..... Cont’d
• if the device is to be connected to other device(s) if the device is to be connected to other device(s) in in order to operate as intended, order to operate as intended, proof must be provided that proof must be provided that it conforms to the essential requirements when it conforms to the essential requirements when connected to any such device(s)connected to any such device(s) having the characteristics having the characteristics specified by the manufacturer, specified by the manufacturer,
• a statement indicating whether or not the device a statement indicating whether or not the device incorporates, as an integral part, a substance incorporates, as an integral part, a substance as referred as referred to in Section 7.4 of Annex Ito in Section 7.4 of Annex I and and data on the tests data on the tests conducted in this connection, conducted in this connection,
• thethe clinical data clinical data referred to in Annex X,referred to in Annex X, • the the draft draft labelabel and, where appropriate,l and, where appropriate, instructions for useinstructions for use; ;
© Locus Consulting
The MDD .......... Annex II.3 The MDD .......... Annex II.3 ..... Cont’d..... Cont’d
(d) (d) the inspection and quality assurance techniques the inspection and quality assurance techniques at the manufacturing stage and in particularat the manufacturing stage and in particular: :
• thethe processes and procedures processes and procedures which will be used, which will be used, particularly as regardsparticularly as regards sterilization, purchasing sterilization, purchasing and the and the relevant documents, relevant documents,
• the the product identification procedures product identification procedures drawn up and kept drawn up and kept up to date from drawings, specifications up to date from drawings, specifications or other relevant or other relevant documents at every stage of manufacturedocuments at every stage of manufacture; ;
(e) (e) the the appropriate tests and trials which will be appropriate tests and trials which will be carried out before, during and after manufacturecarried out before, during and after manufacture, the , the frequency with which they will take place, and the test frequency with which they will take place, and the test equipment used; it equipment used; it must be possible to trace back the must be possible to trace back the calibration of the test equipmentcalibration of the test equipment
© Locus Consulting
The MDD .......... Annex II.3 The MDD .......... Annex II.3 ..... Cont’d..... Cont’d
And in Canada ..........And in Canada ..........
© Locus Consulting
Regulation 32 (1) – An application for a medical device shall Regulation 32 (1) – An application for a medical device shall contain contain • Name of device;Name of device;• Class of deviceClass of device• Device identifier ...... Model number, family name, etcDevice identifier ...... Model number, family name, etc• Name and address of ‘physical’ manufacturerName and address of ‘physical’ manufacturer• Name and address of legal manufacturerName and address of legal manufacturer
• ......................................................................
Regulation 34 (4) An application for a class IV device shall Regulation 34 (4) An application for a class IV device shall contain contain
• Description of the device and materials used in manufacture;Description of the device and materials used in manufacture;• Features of the device that allow it to be used for its intended Features of the device that allow it to be used for its intended
purpose;purpose;• List of countries where sold and any identified postmarket issues;List of countries where sold and any identified postmarket issues;• Risk assessment .... Analysis, evaluation, reduction methods;Risk assessment .... Analysis, evaluation, reduction methods;• Quality plan ..... Practices, resources and activities;Quality plan ..... Practices, resources and activities;• Specification of materials used in manufacturing and packaging;Specification of materials used in manufacturing and packaging;• Description of manufacturing processes for the device(s);Description of manufacturing processes for the device(s);
....................................................................
© Locus Consulting
And in Canada ..........And in Canada ..........
Regulation 32 (4) ......... Cont’dRegulation 32 (4) ......... Cont’d
• List of standards complied with in design and manufacture;List of standards complied with in design and manufacture;• Description of the sterilisation method used;Description of the sterilisation method used;• Summary of supporting clinical evidence supporting the Summary of supporting clinical evidence supporting the
intended use;intended use; For devices of human or animal origin, objective evidence of For devices of human or animal origin, objective evidence of
biological safety of the materials used;biological safety of the materials used; For IVD’s – evidence of representative clinical testing;For IVD’s – evidence of representative clinical testing;
© Locus Consulting
And in Canada ..........And in Canada ..........
Regulation 32 (4) ......... Cont’dRegulation 32 (4) ......... Cont’d
• Attestation that the QMS conforms, with and has been Attestation that the QMS conforms, with and has been assessed by a CAMDCAS Registrar, to be in comppliance with assessed by a CAMDCAS Registrar, to be in comppliance with ISO 13485ISO 13485
• Device labellingDevice labelling• Summary of investigational (laboratory) testing for IVD’sSummary of investigational (laboratory) testing for IVD’s• Bibliography of all published reports dealing with the use, Bibliography of all published reports dealing with the use,
safety and effectiveness of the device(s)safety and effectiveness of the device(s) Pre-clinical and clinical,Pre-clinical and clinical, Process validationProcess validation Software validationSoftware validation Literature studiesLiterature studies
© Locus Consulting
And in Canada ..........And in Canada ..........
While in Australia ........While in Australia ........
Schedule 3 part 1.3 (2)Schedule 3 part 1.3 (2) For the purpose of enabling the assessment to be carried For the purpose of enabling the assessment to be carried
out, the manufacturer must have available, in writing, the out, the manufacturer must have available, in writing, the following information and undertakings:following information and undertakings:
• name and business address name and business address of the manufacturer;of the manufacturer;• details of each manufacturing site details of each manufacturing site where the where the
system is to be applied;system is to be applied;• relevant information about the kind of medical relevant information about the kind of medical
devices devices to which the system is to be applied;to which the system is to be applied;• documentation documentation in relation to the system;in relation to the system;• undertaking by the manufacturer undertaking by the manufacturer to continue to to continue to
comply with the requirements of the system after comply with the requirements of the system after assessment;assessment;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
Schedule 3 part 1.3 (2) Schedule 3 part 1.3 (2) ..... Cont’d..... Cont’d
• undertaking by the manufacturer undertaking by the manufacturer to ensure that the to ensure that the system is at all times adequate and efficacious;system is at all times adequate and efficacious;
• undertaking by the manufacturer to notify the undertaking by the manufacturer to notify the SecretarySecretary, , or the person in relation to whom the kind of or the person in relation to whom the kind of device is included in the Register, of any information of the device is included in the Register, of any information of the kind mentioned in subparagraph 1.4 (3) (c) (i) or (ii) that the kind mentioned in subparagraph 1.4 (3) (c) (i) or (ii) that the manufacturer becomes aware of in relation to the kind of manufacturer becomes aware of in relation to the kind of medical device.medical device.
© Locus Consulting
Schedule 3 part 1.3 (5) Schedule 3 part 1.3 (5)
(5)(5) The The documentationdocumentation of the system of the system must include must include adequate information in relation to the following matters:adequate information in relation to the following matters:• the manufacturer’s quality objectives;the manufacturer’s quality objectives;• the organisation of the manufacturer’s business, the organisation of the manufacturer’s business,
including, in particular, a description of the following:including, in particular, a description of the following: the organisational structure of the business;the organisational structure of the business; the responsibilities of managerial staff and their authoritythe responsibilities of managerial staff and their authority the methods of monitoring whether the system is operating the methods of monitoring whether the system is operating
effectivelyeffectively
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
the design of the kind of medical device to which the the design of the kind of medical device to which the system is to be applied, including, in particular, the system is to be applied, including, in particular, the following:following:
• details of the processes, systems and measures used for details of the processes, systems and measures used for controlling, monitoring and verifying that at each stage of the controlling, monitoring and verifying that at each stage of the design process, the device complies with the applicable design process, the device complies with the applicable provisions of the essential principles;provisions of the essential principles;
• a general description of the kind of device, and of any variants a general description of the kind of device, and of any variants of the kind of device, that the manufacturer plans to of the kind of device, that the manufacturer plans to manufacture;manufacture;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
details of the design specifications for the kind of device, details of the design specifications for the kind of device, including:including:
• any medical device standard or conformity assessment standard any medical device standard or conformity assessment standard that has been applied to the device; andthat has been applied to the device; and
the results of the risk analysis carried out; andthe results of the risk analysis carried out; and• if no medical device standard or conformity assessment if no medical device standard or conformity assessment
standard, or part only of such a standard, has been applied to the standard, or part only of such a standard, has been applied to the device — the solutions adopted to ensure that each device device — the solutions adopted to ensure that each device complies with the applicable provisions of the essential complies with the applicable provisions of the essential principles;principles;
• for a kind of device that is intended by the manufacturer to be for a kind of device that is intended by the manufacturer to be connected to another device — evidence demonstrating that the connected to another device — evidence demonstrating that the device will comply with the applicable provisions of the essential device will comply with the applicable provisions of the essential principles when it is connected to the other device and both principles when it is connected to the other device and both devices are being used for their intended purposes;devices are being used for their intended purposes;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
• a statement indicating whether or not the kind of device a statement indicating whether or not the kind of device incorporates, or is intended to incorporate, as an integral part, incorporates, or is intended to incorporate, as an integral part, a substance mentioned in clause 7.4 of the essential principles, a substance mentioned in clause 7.4 of the essential principles, and, for a device that will do so, data derived from tests and, for a device that will do so, data derived from tests conducted in relation to the device and the substance, and conducted in relation to the device and the substance, and their interaction;their interaction;
• a statement indicating whether or not the device contains a statement indicating whether or not the device contains tissues, cells or substances of animal origin that have been tissues, cells or substances of animal origin that have been rendered non-viable, or tissues, cells or substances of microbial rendered non-viable, or tissues, cells or substances of microbial or recombinant origin;or recombinant origin;
• a copy of the clinical evidence, in relation to the kind of device, a copy of the clinical evidence, in relation to the kind of device, required by the clinical evaluation procedures;required by the clinical evaluation procedures;
• a copy of the information to be provided with the kind of a copy of the information to be provided with the kind of device;device;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
the inspection and quality assurance techniques to be the inspection and quality assurance techniques to be applied in the production of the kind of medical device to applied in the production of the kind of medical device to which the system is to be applied, including, in particular, which the system is to be applied, including, in particular, information about the following:information about the following:
• the processes and procedures to be used (particularly in the processes and procedures to be used (particularly in relation to sterilisation) and the documents relating to those relation to sterilisation) and the documents relating to those processes and procedures;processes and procedures;
• the procedures to be used for purchasing goods or services in the procedures to be used for purchasing goods or services in relation to the production of the kind of device and the relation to the production of the kind of device and the documents relating to those procedures;documents relating to those procedures;
• product identification procedures to be prepared and kept up-product identification procedures to be prepared and kept up-to-date from drawings, specifications or other documents at to-date from drawings, specifications or other documents at each stage of production;each stage of production;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
the tests or trials to be carried out before, during and after the tests or trials to be carried out before, during and after production of the kind of medical device to which the production of the kind of medical device to which the system is to be applied, including, in particular, information system is to be applied, including, in particular, information about:about:• the frequency with which the tests or trials are to be carried the frequency with which the tests or trials are to be carried
out; andout; and• the equipment (including the traceability of the calibration of the equipment (including the traceability of the calibration of
the equipment) used, or to be used, to carry out the tests or the equipment) used, or to be used, to carry out the tests or trials;trials;
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
the system for reviewing experience gained in the the system for reviewing experience gained in the post‑production phase in relation to the kind of medical post‑production phase in relation to the kind of medical device to which the quality management system has been device to which the quality management system has been applied, and the means by which any necessary corrective applied, and the means by which any necessary corrective action will be applied in relation to the design or production action will be applied in relation to the design or production of such devices;of such devices;
whether a conformity assessment standard has been whether a conformity assessment standard has been applied to the system and, if no conformity assessment applied to the system and, if no conformity assessment standard, or part only of a conformity assessment standard, standard, or part only of a conformity assessment standard, has been applied to the system — the solutions adopted to has been applied to the system — the solutions adopted to ensure that the system complies with subclause (2).ensure that the system complies with subclause (2).
© Locus Consulting
Australia .......... Australia .......... Cont’dCont’d
And then along came the STEDAnd then along came the STED
Work stated in 1999Work stated in 1999
2003 - Published as a ‘Proposed Document’ 2003 - Published as a ‘Proposed Document’
...... And then AHWP published the DRAFT CSDT...... And then AHWP published the DRAFT CSDT• The STED, but much improved !!!The STED, but much improved !!!
2006 - SG1 ....... Back to basics, and the Draft CSDT2006 - SG1 ....... Back to basics, and the Draft CSDT
2007 – Published as a [much revised] ‘Proposed Document’2007 – Published as a [much revised] ‘Proposed Document’
2008 – Published as ‘Final Document’2008 – Published as ‘Final Document’
© Locus Consulting
Has the STED been useful ....??Has the STED been useful ....??
Yes !!!Yes !!!
No surprises from the regulatorNo surprises from the regulator
Clarity and predictability of submission/ Clarity and predictability of submission/ documentation requirements for a documentation requirements for a manufacturermanufacturer
© Locus Consulting
Possibly too early to tellPossibly too early to tell
But ..................But ..................
..........All indications to date are positive !!!..........All indications to date are positive !!!
© Locus Consulting
Has the STED been successful ....??Has the STED been successful ....??
Now on to something different .........Now on to something different .........
© Locus Consulting
Implementation of a GHTF Regulatory Implementation of a GHTF Regulatory Framework........Framework........
............Lessons Learned............Lessons Learned
Regulation in AustraliaRegulation in Australia
1985 - Introduced regulation of 4 categories of1985 - Introduced regulation of 4 categories of high risk devices high risk devices
1991 - Therapeutic Goods Act & Regulations1991 - Therapeutic Goods Act & Regulations• Therapeutic Goods Administration EstablishedTherapeutic Goods Administration Established• Evaluation of ‘high risk’ devices (Registered)Evaluation of ‘high risk’ devices (Registered)• Notification of ‘low risk’ devices (Listed)Notification of ‘low risk’ devices (Listed)• Establishment of Australian Register of Therapeutic Establishment of Australian Register of Therapeutic
Goods (ARTG)Goods (ARTG)• GMP for selected devicesGMP for selected devices
1994 – GHTF Established .............1994 – GHTF Established .............• ‘‘Internationalisation’ of EU MDD and AIMDInternationalisation’ of EU MDD and AIMD
© Locus Consulting
1995 – Discussion commenced on ‘harmonisation’ with EU1995 – Discussion commenced on ‘harmonisation’ with EU
1997 – First consultation for new regulatory framework1997 – First consultation for new regulatory framework• Harmonised ......... But with GHTFHarmonised ......... But with GHTF• • •
Late 2002 – New regulations commencedLate 2002 – New regulations commenced• 5 year transition period5 year transition period
Late 2007 – New regulations finally in place fully !!Late 2007 – New regulations finally in place fully !!
© Locus Consulting
Lesson number 1 -Lesson number 1 -
It doesn’t happen overnight !!!It doesn’t happen overnight !!!
© Locus Consulting
Australia’s Regulatory FrameworkAustralia’s Regulatory Framework
GHTF based –GHTF based –
• 14 Essential Principles (of safety and performance)14 Essential Principles (of safety and performance)
• 22 Rules of Classification22 Rules of Classification
• 6 possible Conformity Assessment Procedures6 possible Conformity Assessment Procedures
• Quality Management Systems based on AS ISO 13485Quality Management Systems based on AS ISO 13485
• Entry on the Australian Register of Therapeutic GoodsEntry on the Australian Register of Therapeutic Goods ManufacturerManufacturer Sponsor (aka importer)Sponsor (aka importer) ““Kind of Medical Device”Kind of Medical Device”
© Locus Consulting
EU - Conformity Assessment Procedures
Annex IIDeclaration
of Conformity+
Examinationof the
Product Design(Section 4)
Full Quality Assurance
System(Section 3)(ISO 13485)
Evaluation bythe NB
Annex IIDeclaration
of Conformity
Full Quality Assurance
System(Section 3)(ISO 13485)
Technicaldocument
checked duringaudit
Evaluation bythe NB
Annex VIIDeclaration
of Conformity
Class I* sterileproducts and
measuring devices
Self Certificationwith
Documentation available.
Annex IIIType Examination
Examination by the NB
Annex IV
DeviceVerification
StatisticalVerification
Examination andTesting by
the NB
Annex IVDevice
Verification
100%Verification
Examination andTesting by
the NB
Annex VDevice
Declarationof Conformity
ProductionQuality Assurance
(ISO 13485)
Evaluation bythe NB
Annex VIDevice
Declarationof Conformity
ProductionQuality Assurance
(ISO9003)
Evaluation bythe NB
Market Entry
Desig
nP
rod
ucti
on
Active ImplantsIII
IIbIIa
Active ImplantsIIIIIb
I, I*IIa
Active ImplantsIIIIIbIIa
I* (meas)
IIIIIbIIa
I* (meas)
Active Implants
IIIIIbIIa
I* (meas/ster)
IIbIIa
I* (meas)
I* - Sterile - Measuring Function
NB Surveillance NB Surveillance NB Surveillance NB Surveillance RA Surveillance
Australia - Conformity Assessment Procedures
Part 1Declaration
of Conformity+
Examinationof the
Product Design(Section 4)
Full Quality Assurance
System(Section 3)(ISO 13485)
Evaluation bythe CAB
Part 1Declaration
of Conformity
Full Quality Assurance
System(Section 3)(ISO 13485)
Technicaldocument
checked duringaudit
Evaluation bythe CAB
Part 6Declaration
of Conformity
Class I* sterileproducts and
measuring devices
Self Certificationwith
Documentation available.
Part 2Type Examination
Examination by the NB
Part 3
DeviceVerification
StatisticalVerification
Examination andTesting by the CAB
Part 3Device
Verification
100%Verification
Examination andTesting by the CAB
Part 4Device
Declarationof Conformity
ProductionQuality Assurance
(ISO 13485)
Evaluation bythe CAB
Part 5Device
Declarationof Conformity
ProductionQuality Assurance
(ISO9003)
Evaluation bythe CAB
Market Entry
Desig
nP
rod
ucti
on
Active ImplantsIII
IIbIIa
Active ImplantsIIIIIb
I, I*IIa
Active ImplantsIIIIIbIIa
I* (meas)
IIIIIbIIa
I* (meas)
Active Implants
IIIIIbIIa
I* (meas/ster)
IIbIIa
I* (meas)
I* - Sterile - Measuring Function
CAB Surveillance CAB Surveillance CAB Surveillance CAB Surveillance TGA Surveillance
GHTF - Conformity Assessment Procedures
Declaration of Conformity
+Comprehensive
Examinationof the STED
includingProduct Design
Full Quality Assurance
System
(ISO 13485)
Evaluation bythe CAB
Declaration of Conformity
Examination of the STED
Full Quality Assurance
System
(ISO 13485)
Evaluation bythe CAB
Declaration of Conformity
Self Certificationwith
Documentation available.
Type Examination
Examination by the CAB
DeviceDeclaration
of Conformity
ProductionQuality Assurance
(ISO 13485)
Evaluation bythe CAB
Market Entry
Desig
nP
rod
ucti
on
Class D Class CClass B
Class DClass C
Class A*
Class DClass CClass BClass A*
(meas/ster)
CABSurveillance CAB Surveillance CAB Surveillance RA Surveillance
Class B
Class I* sterileproducts and measuring
devices
Implemented October 2002Implemented October 2002
Two transition periodsTwo transition periods
• Two yearsTwo years
All class A medical devices included on the RegisterAll class A medical devices included on the Register Australian manufacturers must implement a QMSAustralian manufacturers must implement a QMS
• Five yearsFive years
All manufacturers must demonstrate compliance of All manufacturers must demonstrate compliance of products with the new regulationsproducts with the new regulations
© Locus Consulting
The Chosen Path ……….The Chosen Path ……….
65%65% Full QMS Full QMS
0.4%0.4% Type Examination Type Examination
1.0%1.0% Statistical Verification Statistical Verification
30%30% Production QMS Production QMS
1.3%1.3% Product QMS Product QMS
Full QMSProduction QMS
Statistical Verification
Product QMS
Type Examination
The Australian Register of Therapeutic GoodsThe Australian Register of Therapeutic Goods
A Register is an absolute imperative in …..A Register is an absolute imperative in …..
• Understanding what products are in the marketUnderstanding what products are in the market
• Knowing who is responsible for placing those products in the Knowing who is responsible for placing those products in the marketmarket
But, why ………..But, why ………..
• Facilitate Facilitate Field safety corrective actionsField safety corrective actions RecallsRecalls Postmarket StudiesPostmarket Studies
• Public access Public access (where available)(where available)
Users can locate distributor and/or manufacturerUsers can locate distributor and/or manufacturer
Supporting GHTF DocumentsSupporting GHTF Documents
SG 1 – two documents –SG 1 – two documents –
• SG1 N055:2009 - SG1 N055:2009 - Definitions of the term Manufacturer, Definitions of the term Manufacturer, Authorised Representative, Distributor and ImporterAuthorised Representative, Distributor and Importer
- July 2009- July 2009
• SG1 N65:2010 – SG1 N65:2010 – Registration of Manufacturers and Other Registration of Manufacturers and Other parties and Listing of Medical Devices parties and Listing of Medical Devices
– – September 2010September 2010
In establishing a Register .....In establishing a Register .....
Identify parties subject to registrationIdentify parties subject to registration• ManufacturerManufacturer• Authorised representativeAuthorised representative• ImporterImporter• DistributorDistributor
Identify the information requiredIdentify the information required• NameName• Physical AddressPhysical Address• Scope of activitiesScope of activities• Types of devicesTypes of devices
Often the same organisation
But who to include ..........But who to include ..........
Manufacturer Manufacturer
any natural or legal person who designs and/or manufactures a medical any natural or legal person who designs and/or manufactures a medical
device with the intention of making the finished device available for use, device with the intention of making the finished device available for use,
under his name; whether or not such a medical device is designed and/or under his name; whether or not such a medical device is designed and/or
manufactured by that person himself or on his behalf by a third party(ies).manufactured by that person himself or on his behalf by a third party(ies).
Authorised RepresentativeAuthorised Representative
Any natural or legal person established within a country or jurisdiction who Any natural or legal person established within a country or jurisdiction who has received a mandate from the manufacturer to act on his behalf for has received a mandate from the manufacturer to act on his behalf for specific tasks with regards to the latter’s obligations under that country or specific tasks with regards to the latter’s obligations under that country or jurisdiction’s legislation.jurisdiction’s legislation.
These are These are ‘must have’s’‘must have’s’ in a Register in a Register
How about ...........How about ...........
Distributor (s)Distributor (s) Any natural or legal person in the supply chain who, on his own Any natural or legal person in the supply chain who, on his own
behalf, furthers the availability of a medical device to the end userbehalf, furthers the availability of a medical device to the end user
Importer (s)Importer (s) Any natural or legal person in the supply chain who first makes a Any natural or legal person in the supply chain who first makes a
medical device, manufactured in another jurisdiction, available in a medical device, manufactured in another jurisdiction, available in a country where it is to be marketedcountry where it is to be marketed
Subcontractor (s)Subcontractor (s) Raw materials, contract assemblers, sterilisation, etcRaw materials, contract assemblers, sterilisation, etc
These are These are ‘nice to have’s’‘nice to have’s’
Role of the RegistrantRole of the Registrant
Provide the identified information to the RegisterProvide the identified information to the Register
Attest to its accuracyAttest to its accuracy
Ensure information held in the Register is currentEnsure information held in the Register is current
Provide corrections to the Register where there is Provide corrections to the Register where there is
a change to the information held a change to the information held
Device detailsDevice details
Sufficient information to identify the Sufficient information to identify the responsible partiesresponsible parties
• Name and contact details Name and contact details ManufacturerManufacturer Authorised RepresentativeAuthorised Representative/Distributor/Importer/Distributor/Importer
Sufficient information to identify the DeviceSufficient information to identify the Device
Name/model numberName/model number Identification using international coding systemIdentification using international coding system Other relevant informationOther relevant information
• Intended purposeIntended purpose• ClassificationClassification• Sterility statusSterility status
Generally consists of two databasesGenerally consists of two databases
Register ofRegister of• ManufacturerManufacturer• Authorised representativeAuthorised representative• ImporterImporter
distributor(s)distributor(s)
Listing of Listing of • Medical device details – including Medical device details – including
ManufacturerManufacturer
Authorised representativeAuthorised representative
• ImporterImporter
• distributor(s) ………………….. As appropriatedistributor(s) ………………….. As appropriate
Other issues Other issues
Internet basedInternet based
• Data input by Auth Rep, Importer, Distributor, Data input by Auth Rep, Importer, Distributor,
manufacturermanufacturer
• Reviewed by Regulator ……..accepted/rejectedReviewed by Regulator ……..accepted/rejected
• Notification to submitting party of acceptance/rejectionNotification to submitting party of acceptance/rejection
Maintenance by ???????Maintenance by ???????
Public Access to some or all informationPublic Access to some or all information Some data supplied may be considered confidential by Some data supplied may be considered confidential by
manufacturermanufacturer
Lesson number 2 ......Lesson number 2 ......
In determining register contentIn determining register content
• Be practicalBe practical
• Two types of information Two types of information Need to haveNeed to have Nice to haveNice to have
• Do not be too ambitious in this processDo not be too ambitious in this process
• Remember, the greater the detail, the higher the Remember, the greater the detail, the higher the maintenance overhead …… for both the regulator and maintenance overhead …… for both the regulator and information providerinformation provider
The Australian Register of Therapeutic Goods ………The Australian Register of Therapeutic Goods ………
55%55% Class A Class A 3%3% Class A Class A SterileSterile
0.2% Class A 0.2% Class A with measuringwith measuring
functionfunction
22%22% Class B Class B 15%15% Class C Class C 4%4% Class D Class D 1.0% Class D 1.0% Class D (AIMD)(AIMD)
Class AClass C
Class D Class D (AIMD)
Class A (m) Class A (s)
Class B
But in real life, this means .........But in real life, this means .........
ARTGARTG• All classes of device, A through DAll classes of device, A through D• Approx 35,000 entries for a ‘kind of medical device’Approx 35,000 entries for a ‘kind of medical device’• Lower risk class devices (A – C), low level of detailLower risk class devices (A – C), low level of detail• Higher risk class devices (D), high level of detailHigher risk class devices (D), high level of detail
Canadian RegisterCanadian Register• Only Class B and aboveOnly Class B and above• Detail down to catalog numberDetail down to catalog number• Approx 870,000 entries !!Approx 870,000 entries !!
Best guess – worldwide market -Best guess – worldwide market - 2.5 million devices2.5 million devices+/- .5 million +/- .5 million
www.ebs.tga.gov.auwww.ebs.tga.gov.au
Quality Management SystemsQuality Management Systems
Old systemOld system• Only for some, very specific devices, manufacturers required Only for some, very specific devices, manufacturers required
GMP certification by the TGAGMP certification by the TGA
New frameworkNew framework• All manufacturers, except for Class A devices, required QMS All manufacturers, except for Class A devices, required QMS
based on 13485based on 13485
Two year transition period for local manufacturers to ‘get up Two year transition period for local manufacturers to ‘get up to speed’ and implement QMSto speed’ and implement QMS
A QMS is not built and implemented overnightA QMS is not built and implemented overnight
© Locus Consulting
Quality Management SystemsQuality Management Systems
Overseas manufacturersOverseas manufacturers• No real issues or difficultiesNo real issues or difficulties• Already in US market (QSR’s) and EU market (MDD)Already in US market (QSR’s) and EU market (MDD)• Good level of complianceGood level of compliance
Local manufacturersLocal manufacturers• Only sterile, implantable, and a couple of others previously Only sterile, implantable, and a couple of others previously
required GMPrequired GMP• Low level of understandingLow level of understanding• But why ......... Never needed it before ......But why ......... Never needed it before ......• Low level of complianceLow level of compliance
© Locus Consulting
Lesson number three .....Lesson number three .....
Local manufacturers will need high Local manufacturers will need high levels of support to ‘get up to levels of support to ‘get up to
speed’speed’
© Locus Consulting
Timing of introductionTiming of introduction
Two transition periods Two transition periods • 2 years2 years• 5 years5 years
Resource modellingResource modelling• Early take-upEarly take-up• Steady take-upSteady take-up• Late take-upLate take-up
© Locus Consulting
Take-up rate planningTake-up rate planning
© Locus Consulting
5 years
ApplicationRate
Lesson number four ........Lesson number four ........
Everybody leaves it ‘til the last Everybody leaves it ‘til the last minute !!!minute !!!
• Even the TGA ......... ‘adjusted’ IT systems !!!Even the TGA ......... ‘adjusted’ IT systems !!!
Incentives to register earlier rather than laterIncentives to register earlier rather than later• Fee discounts, etcFee discounts, etc• Australia & new IVD frameworkAustralia & new IVD framework
No annual fees for 3/4 years of the transition timeNo annual fees for 3/4 years of the transition time
© Locus Consulting
Conformity AssessmentConformity Assessment
The CABThe CAB
• Third party test and/or certification bodies designated by the Third party test and/or certification bodies designated by the Regulatory Authority to review the application, by a Regulatory Authority to review the application, by a manufacturer, of an appropriate conformity assessment manufacturer, of an appropriate conformity assessment procedure for a specified range, or ranges of productsprocedure for a specified range, or ranges of products
Conformity AssessmentConformity Assessment
Role of the CABRole of the CAB
• Pre-marketPre-market
Assessment of application of the conformity Assessment Assessment of application of the conformity Assessment ProcedureProcedure
Issue CertificationIssue Certification
• Post marketPost market On-going surveillance auditsOn-going surveillance audits Approve changesApprove changes
• ‘‘Co-regulator’, in conjunction with RACo-regulator’, in conjunction with RA
Conformity AssessmentConformity Assessment
‘‘Qualifications’ of the CABQualifications’ of the CAB
• Sufficient Resources & CompetenceSufficient Resources & Competence QMS auditorsQMS auditors Device experts (appropriate to designated activities)Device experts (appropriate to designated activities)
• May engage consultantsMay engage consultants
• Documented procedures & supportDocumented procedures & support
• Internal QMS - Internal QMS - ISO/IEC Guide 62:1996 – General ISO/IEC Guide 62:1996 – General requirements for bodies operating assessment and requirements for bodies operating assessment and certification/ registration of quality systemscertification/ registration of quality systems
Conformity AssessmentConformity Assessment
‘‘Qualifications’ of the CAB …….Qualifications’ of the CAB …….
• IndependenceIndependence cannot provide services of ‘consultant’cannot provide services of ‘consultant’
• ImpartiallityImpartiallity No conflict of interest No conflict of interest
• ConfidentialityConfidentiality No disclosure of information gained during assessment to a No disclosure of information gained during assessment to a
third party, other than the RAthird party, other than the RA
Role of the Regulatory AuthorityRole of the Regulatory Authority
Public health protectionPublic health protection
Political accountabilityPolitical accountability
Efficient use of ResourcesEfficient use of Resources
The big question …….. ????????The big question …….. ????????
• Should the Regulator take on the role of a CAB, Should the Regulator take on the role of a CAB, • or engage the services of a co-regulator to assist in the or engage the services of a co-regulator to assist in the
processprocess• ………… ………… and focus on Registration and Listing activities,and focus on Registration and Listing activities,• ………… ………… and Postmarket monitoring/surveillanceand Postmarket monitoring/surveillance
Responsibilities of the RAResponsibilities of the RA
Publish designation criteriaPublish designation criteria Establish application processEstablish application process Assessment processAssessment process Designation decisionDesignation decision Review of amendments to scope of designationReview of amendments to scope of designation On-going surveillance of CAB activitiesOn-going surveillance of CAB activities
Responsibilities of the RAResponsibilities of the RA
Have skills to assess activities of CABHave skills to assess activities of CAB
Scope of designation Scope of designation • Some, or all, medical devicesSome, or all, medical devices• IVD’sIVD’s• Active ImplantsActive Implants
Levels of Levels of • IndependenceIndependence• ImpartialityImpartiality• IntegrityIntegrity
Regular & structured surveillance of CAB activities Regular & structured surveillance of CAB activities
Ability to act on findings of CABAbility to act on findings of CAB• Postmarket activitiesPostmarket activities
Other GHTF EconomiesOther GHTF Economies
United StatesUnited States
• External Review Body – Accredited Persons ProgramExternal Review Body – Accredited Persons Program Designated by FDADesignated by FDA Currently 11 in number (but only 6 have completed FDA training)Currently 11 in number (but only 6 have completed FDA training) Assesses QMS of manufacturerAssesses QMS of manufacturer Assesses designated range of Class I and II devicesAssesses designated range of Class I and II devices
• FDAFDA Designates Approved Persons (organisations)Designates Approved Persons (organisations) On-going monitoring process to maintain confidence in On-going monitoring process to maintain confidence in
Authorised PersonAuthorised Person Reviews device assessment report prepared by Authorised Reviews device assessment report prepared by Authorised
PersonPerson
Responsible for regulatory decisionResponsible for regulatory decision
Other GHTF EconomieOther GHTF Economiess
CanadaCanada
• Conformity Assessment Body – RegistrarConformity Assessment Body – Registrar Designated by SCC acting on behalf of Health CanadaDesignated by SCC acting on behalf of Health Canada Currently 14 in numberCurrently 14 in number Assesses QMS of manufacturer – issues CAMDCAS CertificateAssesses QMS of manufacturer – issues CAMDCAS Certificate
• Health CanadaHealth Canada Establishment Establishment licence for licence for
• Class I device manufacturersClass I device manufacturers• Class II, III and IV importersClass II, III and IV importers
DeviceDevice licence for Class II, III and IV medical devices licence for Class II, III and IV medical devices Technical review of class III and class IV device dossierTechnical review of class III and class IV device dossier
Responsible for regulatory decisionResponsible for regulatory decision
Other GHTF EconomiesOther GHTF Economies JapanJapan
• Conformity Assessment BodyConformity Assessment Body
• Registered Certification Body - designated class II devicesRegistered Certification Body - designated class II devices
PMDA (Government Agency) -all other class II, III and IV PMDA (Government Agency) -all other class II, III and IV
devices devices
• Ministry of Health, Labour & WelfareMinistry of Health, Labour & Welfare
Designates Registered Certification BodiesDesignates Registered Certification Bodies Reviews reports prepared by PMDA or RCBReviews reports prepared by PMDA or RCB
Responsible for regulatory decisionResponsible for regulatory decision
© Locus Consulting
Other GHTF EconomiesOther GHTF Economies AustraliaAustralia
Conformity Assessment Body – TGAConformity Assessment Body – TGA• Animal, microbial or recombinant origin materialsAnimal, microbial or recombinant origin materials• Devices containing medicinesDevices containing medicines• Australian ManufacturersAustralian Manufacturers
Regulatory Authority – TGARegulatory Authority – TGA
• Accepts EC certification for lower risk devicesAccepts EC certification for lower risk devices
• Reviews EC certification decision documentation for Reviews EC certification decision documentation for
higher risk deviceshigher risk devices
• Responsible for regulatory decisionResponsible for regulatory decision
Other GHTF EconomiesOther GHTF Economies
EuropeEurope
• Conformity Assessment Body – Notified BodyConformity Assessment Body – Notified Body
Designated by Competent Authority in each member StateDesignated by Competent Authority in each member State Currently ~75 in numberCurrently ~75 in number
Responsible for regulatory decisionResponsible for regulatory decision
• Competent AuthorityCompetent Authority
Responsible for Responsible for • designation of Notified Bodiesdesignation of Notified Bodies• Oversight of ongoing activities of Notified BodiesOversight of ongoing activities of Notified Bodies• Postmarket monitoringPostmarket monitoring
Cautions ………Cautions ………
EU Proposal – recasting of directives EU Proposal – recasting of directives …..released 2008…..released 2008
• More harmonised/centralised process to ensure more More harmonised/centralised process to ensure more uniformity of NB’suniformity of NB’s
???? Central authority???? Central authority Work of Notified Body Operations GroupWork of Notified Body Operations Group
• Strengthening Co-operation between RA’s with regard to Strengthening Co-operation between RA’s with regard to monitoring performance of NB’smonitoring performance of NB’s
• Greater transparency in work and functioning of NB’sGreater transparency in work and functioning of NB’s
Cautions ……… Cautions ……… (cont’d)(cont’d)
Australian Experience to dateAustralian Experience to date
• Variability of Notified Body reviewsVariability of Notified Body reviews
• Examples of Examples of
expertise lacking in many areas, particularly expertise lacking in many areas, particularly • clinical evidence reviewclinical evidence review• Sterilisation procedures and validation reviewSterilisation procedures and validation review
EC certificate by a NB, but no sterilisation validation in placeEC certificate by a NB, but no sterilisation validation in place Inadequate review of manufacturer’s classification rationaleInadequate review of manufacturer’s classification rationale Little, or no, follow-up of audit non-conformities by NBLittle, or no, follow-up of audit non-conformities by NB
• As evidenced by Audit reports supplied by manufacturersAs evidenced by Audit reports supplied by manufacturers Surveillance audits overdueSurveillance audits overdue
• arbitrary extension of EC certificatesarbitrary extension of EC certificates Retrospective review of technical filesRetrospective review of technical files Incorrect/misleading certificatesIncorrect/misleading certificates
• Including out of scope productsIncluding out of scope products NB auditor recommendation to withdraw certification not NB auditor recommendation to withdraw certification not
accepted by the NBaccepted by the NB
• Some of these issues also identified inSome of these issues also identified in
NBOG Annual reportsNBOG Annual reports EU Commission Public Consultation Paper on Recasting of MDDEU Commission Public Consultation Paper on Recasting of MDD
The Question …….The Question …….
How can a CAB maintain competence when …..How can a CAB maintain competence when …..
85%85% of certificates are issued by of certificates are issued by 1515 of the of the 7777 Notified Notified BodiesBodies ….. …..
0
5
10
15
20
25
% C
ertifi
cate
s issu
ed
Notified Bodies ..............
Lesson number 5 Lesson number 5
Does this mean the system is broken Does this mean the system is broken …………
• Absolutely not ….Absolutely not ….
• But it does mean a RA needs to exercise But it does mean a RA needs to exercise judgement in recognising CAB’s to support judgement in recognising CAB’s to support their regulatory framework.their regulatory framework.
‘‘Adjustments’ in AustraliaAdjustments’ in Australia
Reform drivers -Reform drivers -
EU Proposal (including some very frank admissions !) in2008 to re-cast the EU Proposal (including some very frank admissions !) in2008 to re-cast the MDD, AIMDD and IVDDMDD, AIMDD and IVDD
Review of NBOG annual reports details findings (and corrective actions) of Review of NBOG annual reports details findings (and corrective actions) of the operation of some NB’sthe operation of some NB’s
Several years experience with the current framework, including ‘comparing Several years experience with the current framework, including ‘comparing notes’ with fellow regulatorsnotes’ with fellow regulators
EU up-classification of major orthopaedic joints finalised in September 2010EU up-classification of major orthopaedic joints finalised in September 2010
FDA review of 510(k) process and general ‘tightening up’FDA review of 510(k) process and general ‘tightening up’
Revised EU - Australia MRA ............... SoonRevised EU - Australia MRA ............... Soon
Canada – Australia GMP MRA now in placeCanada – Australia GMP MRA now in place
© Locus Consulting
ReformsReforms
Re-classification of major orthopaedic joints – hips, knees, Re-classification of major orthopaedic joints – hips, knees, shouldersshoulders
Introduction of CAB’s in AustraliaIntroduction of CAB’s in Australia• Lower risk devicesLower risk devices
Strengthening of MRAStrengthening of MRA• Partnering with, and designation of selected Notified BodiesPartnering with, and designation of selected Notified Bodies
Increasing the detail held on the RegisterIncreasing the detail held on the Register
© Locus Consulting
Lesson number 6Lesson number 6
A GHTF regulatory framework for A GHTF regulatory framework for medical devices is not medical devices is not
‘set and forget’‘set and forget’
It must adjust to the changing environment, both It must adjust to the changing environment, both scientific and politicalscientific and political
It will require maintenance along the way to stay It will require maintenance along the way to stay relevantrelevant
© Locus Consulting