2 New aluminium housing with excellent robustness

10 inch panoramic touch screen

HD TV decoding for all standards

The “hands free” sys-tem allows you toperform all the mea-surements in chal-lenging situations.

Split screen: you just need a single screen to view all measurements, TV picture and spectrum.

A carrying bag is suppliedfor better protection andperfect mobility.

High brightness which makes readingpossible under all circumstances

The feeling of a new way of measurementSEFRAM 7870 series

The control measure...

3

SEFRAM 7871, 7872, 7875, 7876The feeling of a new way of measurement

Spectrum analysis from 5 to 900MHz, to view all spurious and signals.

MER per carrier measurement, for eachcarrier of a multiplex.

All measurements displayed in onescreen, with spectrum.

Checksat mode, with NIT. Fast and accurate!

Electronic compass for dish

alignment.

LTE function : simulate the effect of a LTE rejection filter.

Real time echoes and pre-echoes display, with zoom.

SELECTION GUIDEBandwidth from 5MHz up to 2200 MHz ( full range) 45MHz-2200MHz � � �

DVB-T, DVB-T2, T2 Lite Full measurement � � � �

DVB-S, DVB-S2 (QPSK,8PSK), Full measurement � � � �

DVB-C/C2 (QAM) Full measurement including return path ( 5-45MHz) - � � �

Autoset mode � � � �

Fast spectrum analysis � � � �

Satellite identification on spectrum ( NIT) � � � �

Checksat Mode with satellite recognition (NIT) � � � �

Measurement Map with record to USB interface � � � �

Alignement of dish with compass � � � �

Constellation pattern for DVB-T/T2, T2 Lite, DVB-S/S2, DVB-C/C2 Not For DVB-C � � �

Impulse response , echoes and pre-echoes for DVB-T /T2 � � � �

Cell ID � � � �

Link margin / noise margin calculation � � � �

DISEqC 1.2 and SatCR � � � �

LTE simulation measurement (Long term evolution) � � � �

Display HD programs for DVB-T, T2, DVB-C, DVB-S, S2 free TV Not For DVB-C � � �

NIT (Network Identification table) � � � �

Ethernet , USB interface � � � �

MER versus carrier for DVB-T/DVB-T2 - � � �

Display encrypted HD programs for DVB-T, T2, DVB-C, DVB-S, S2 * - � � �

HDMI interface (output) - � � �

ASI-TS input / output - - � �

Spectrum analysis with expert mode - - � �

PVR memorization ( personnal video recorder) - - � �

Multi-stream decoding capability - - - �

GPS (usb) - - - �

Wi-fi networks measurement (Factory option) - option option optionOptical power measurement dynamic option - option option option

Sefram 7871 Sefram 7872 Sefram 7875 Sefram 7876

*user must have a valid subscription and encryption type must be compatible (check with our sales department)

Visit our Website : www.sefram.fr

4

DAB/DAB+ audio decoding. Service table in DAB/DAB+. Echoes analysis: graph and table.

Display of the selected channel with Network name and Network Id. This function is available for terrestrial, cable and satellite.

Password function: to protect your TV meter.

GPS mapping: recording of all selected para-meters, with GPS coordinates.

Result of a mapping campaingn with GoogleEarth.TM

Wifi (option) : power measurement withSSID information).

Complete management of SATCR and DCSS (IEN50607) in satellite mode. Multistream option: display and analysis of aDVB-S2 stream with several multiplex in a sin-gle transponder.

Optical Power measurements for severalwavelengths.

Time stamped records on USB memory, withautomatic csv file. Recording possible forseveral days.

SEFRAM 7870 Series Many innovative and powerful features

5

SELECTION GUIDE Sefram Sefram Sefram Sefram7861HD-T2 7862HD-T2 7865HD-T2 7866HD-T2

DVB-T, DVB-T2 (C-OFDM). Full measurement � � � �

DVB-S / DVB-S2 (QPSK/8PSK). Full measurement � � � �

DVB-C (QAM)-Full measurement including return path - � (45-865MHz) � �

Fast spectrum analysis � � � �

Spectrum analysis with expert mode - - � �

Satellite identification on spectrum � � � �

Display HD TV programs for terrestrial and satellite * - � � �

Display TV programs for DVB-S and DVB-S2 free TV � � � �

Display encrypted programs DVB-T, DVB-S and DVB-S2* - � � �

Display analog TV programs � � � �

Full OSD TV (On Screen Display) - - � �

Audio & video PID information - - � �

Measurement monitoring (graphical) with datalogger � � � �

MER versus carrier measurement � � � �

Impulse response, echoes and pre-echoes analysis � � � �

Cell ID � � � �

NIT (Network Identification Table) � � � �

Constellation pattern for DVB-T, DVB-T2, DVB-C, DVB-S and DVB-S2 � � � �

Link margin / Noise margin calculation � � � �

Checksat Mode with satellite recognition � � � �

DISEqC 1.2 and SatCR � � � �

Audio / Video input and output � � � �

GPS - - - �

ASI-TS input/ output - - � �

Sefram 7865HD-T2,Sefram 7866HD-T2:

Frequency range: 5MHz to 2150MHz. Full measurements for all modulations : QPSK, 8PSK, C-OFDM, MPEG-2 and MPEG-4Power, BER, MER for digital terrestrial TV, starting at 35dBµVConstellation pattern and OSD

Sensitive encoding wheel

Senstive keypad

TV Meters fully compatible with all standardsDVB-T/H, DVB-T2, DVB-S, DVB-S2, DVB-C

* user must have a valid subscription and encryption type must be compatible (check with our sales department).

DVB-T2Analog TV

channels display

Audio & videoinput/output

KIT TR7836 : Application software for TV Meters7861HD-T2, 7862HD-T2, 7865HD-T27866HD-T2P/N : TR7836

Deluxe carrying pouchP/N : 978360000

Visit our Website : www.sefram.fr

Rugged metal housing with protective bumpers

7 inch touch screen

SELECTION GUIDEDVB-T, DVB-T2, full measurement �

DVB-S, DVB-S2, full measurement �

NIT (Network Identification Table) for satellite �

Pointing mode for terrestrial mode �

Pointing mode for satellite mode (Checksat) �

Display free-to-air HD and SD programs for terrestrial �

Display free-to-air HD and SD programs for satellite �

Echoes display in DVB-T and DVB-T2 �

DISEqC 1.2 �

SatCR and DCSS (EN50607) �

Remote supply 5V/13/18V/24V �

USB interface �

Free software update from Sefram website �

Rain and sun protector + belt clip option

SEFRAM 7848

TV Meter for digital terrestrial and digital satellite TVThe ideal companion for the electrician

Sefram7848

6

Choice between terrestrial and satellite.

A detailed menu is provided for eachtype of installation.

New terrestrial pointing function,with the name of multiplex found.

In satellite mode, the checksatprovides the NIT. No error possi-ble!

All measurements are displayed witha clear color set: green if measure-ment is OK, red if measurement isout-off limits.

Display of free-to-air SD and HD programs.

Simplified spectrum analysis.

The SEFRAM 7848 has been designed to ease the installation of terres-trial and satellite antennas : we have optimized the man-machineinterface, taking the best benefit of the touch screen, to ease the pro-cess and save time.

The 7848 is supplied witha carrying bag.

P/N: 978481000

7

SELECTION GUIDE5Mhz to 865MHz bandwidth � �

5Mhz to 2200MHz bandwidth - �

DVB-T, DVB-T2, DVB-T2 Lite full measurement � �

DVB-C, DVB-C2 full measurements (J.83A) � �

DVB-S, DVB-S2, full measurement - �

NIT (Network Identification Table) for satellite - �

Cell Id for terrestrial band � �

Pointing mode for terrestrial mode - �

Pointing mode for satellite mode (Checksat) - �

Display free-to-air HD and SD programs for terrestrial TV � �

Display free-to-air HD and SD programs for satellite TV - �

Display free-to-air HD and SD programs for cable TV � �

Echoes display in DVB-T and DVB-T2 � �

Constellation diagram DVB-T/T2, DVB-S/S2, DVB-C/C2 - �

Measurement map � �

DISEqC 1.2 - �

SatCR and DCSS (EN50607) - �

Remote supply 5/13/18/24V � �

USB interface � �

Free software update from Sefram website � �

Free PC software TR7837 � �

Rain and sun protector + belt clip option option

SEFRAM 7849 : TV Meter for digital terrestrial, cable and satellite TV

SEFRAM 7817 : TV Meter for digital terrestrial and cable TV**(available in November 2015)

Powerfull Autoset for terrestrial,cable and satellite.

A single screen for all measurementsand spectrum.

Fast spectrum analysis in satellite.

Measurement map for terrestrial,cable and satellite.

Constellation diagram in terrestrial,cable and satellite.

Sefram Sefram7817 7849

Visit our Website : www.sefram.fr

32, rue Edouard Martel - BP55- 42009 - St Etienne - cedex 2Tél. +33 (0) 4.77.59.01.01Fax. +33 (0) 4.77.57.23.23Web : www.sefram.fr - e-mail : sales@sefram.fr

For assistance and ordering

FTMESCH2015UK - Specifications can be updated without notice

Pictures are indicative- Sefram 2015

SEFRAM 7940Optical power meter• Optical power measurement in dBm or mW• 5 wavelengths available: 850nm, 980nm, 1300nm and 1550nm• Insertion loss measurement• Panoramic LCD with backlight• Auto power-off

Solutions for fiber networks

Specifications SEFRAM 7940Display graphical LCD with backlightWavelength 850, 980, 1300, 1550 nmDynamic -50 to +26dBmAccuracy linear: 0.1% - non linear: 0.01dBmSupplied with : batteries, manual, protective holster, carrying pouch,

connectors.

SEFRAM 7951Optical light source• Provides 2 wavelenhghts for single mode fiber• Output modulated• Compact housing with protective holster• Easy-to-use

SEFRAM 7951MOptical light source for Multi-Mode.• Provides 2 wavelenghts (850 and 1300 nm) for multi-mode fiber

Specifications SEFRAM 7951Display graphical LCD with backlightWavelength 1310, 1550 nmOutput power -7dBmSupplied with : batteries, manual, protective holster, carrying pouch,

connectors.

SEFRAM 7950Visual fault finder• Low cost solution for testing the continuity of fibers• Laser source with 650nm (visible)• CW or pulse mode• Robust metal case

SpecificationsOutput wavelength 650 ± 10nmOutput power 3mWPulse mode 2-3 HzSupplied with : batteries, manual, carrying pouch

SEFRAM 7950

Optical fiber not supplied

8