The Dominant Force in Material Handling - EquipNet · Standard TOC, Inches (mm) 12 (360) Minimum Pallet Conveyor TOC, Inches (mm) 12 (305) Standard Tin Line (TL), Inches (mm) 156

The Dominant Force in Material Handling

TM

Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 2

™

LEADERS IN MATERIAL

HANDLING

For a combined period of over

120 years, the Companies of

Arrowhead Systems, Inc. have utilized

their expertise to provide:

• Solutions • Systems • Turnkeys

• Line Layouts • Integration

• Controls • Installation

3

Product Offering:• Air Conveyors

• Container Conveyor Systems

• Coolers

• Depalletizers (Low Level / High Level)

• Dunnage, Sorting and Stacking

• Accumulation Systems

• Gripper Elevators / Lowerators

• Gripper Rinsers

• Pallet Conveyor Systems

• Pallet Stackers / Dispensers

• Palletizers (Low Level / High Level)

• Singlefilers

• Sorting Systems

• Warmers

Engineering:• Line Design

• Customized Solutions

• Integration

• Project Management

Customer Service:• Installation, Start-Up

and Training

• Equipment Relocation

• 24-Hour Parts and Service Support (800.882.4995)

• Machine Audits

www.arrowheadsystems.com

Notes


Companies of Arrowhead Systems, Inc.

■ Depalletizers (Low & High Level)■ Palletizers (Low & High Level)■ Pallet Handling Systems■ Pallet Stackers and Dispensers■ Sheet Handling Inspection Systems■ Spray Warmers■ Spray Coolers■ Twist Rinsers

Busse/SJI Corporation124 N. Columbus Street | Randolph, WI 53956

Ph: 920.326.3131 | Fax: 920.326.3134

5



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


Companies of Arrowhead Systems, Inc.

Arrowhead Conveyor Corporation, Inc.3255 Medalist Drive | P. O. Box 2408 | Oshkosh, WI 54903

Ph: 920.235.5562 | Fax: 920.235.3638

■ Table Top Conveyors ■ Mat Top Conveyors■ Rinsers (Water & Ionized Air)■ Vacuum, Belt, Chain & Air Conveyor Systems■ Gripper Elevators & Lowerators■ Accumulation Systems■ Combiners (Mechanical)■ Singlefilers (Pressureless)■ Rollerless Case Conveyors■ System Design and Layout■ Integration / Installation ■ Systems Controls


Page

■ Depalletizers

■ Turbo Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

■ Classic “W” Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

■ Advantage Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Palletizers

■ Viper Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■ Classic “R” Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Eclipse Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ SJI Warmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

■ SJI Coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

■ Other

■ Bulk Container Receiving and Loading System. . . . . . . . . . . 24

■ Hawk Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

■ Busse/SJI Field Service Offerings . . . . . . . . . . . . . . . . . . . . . . 28

■ Resources and Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

■ After Sale Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Table of Contents

www.arrowheadsystems.com 7

Systems Integration


TURBO SERIES™

Bulk Depalletizer

FEATURES MODELST3003 T3004 T4003 T4004 T5003 T5004

Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Removal • • • • • •Automatic Single-Stage Sheet Removal S • S • S •Automatic Dual-Stage Sheet Removal O S O S O SManual Top Frame Removal • • • • • •Automatic Single-Stage Top Frame Removal S • S • S •Automatic Dual-Stage Top Frame Removal O S O S O SSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • O O O OMonochrome Touch Screen Operator Interface S S S S S SColor Touch Screen Operator Interface O O O O O OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC O O O O O OAdditional Dunnage Capacity and Collation • O • O • OPallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O

CONTAINERS MODELST3003 T3004 T4003 T4004 T5003 T5004

Glass Round S S • • • •Glass Non-Round O O • • • •Metal Round • • S S • •Metal Non-Round • • O O • •Plastic Round • • • • S SPlastic Non-Round • • • • O OComposite Round • • • • S SComposite Non-Round • • • • O O

S =StandardO=Optional • =Not Available / Applicable



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits

9 www.arrowheadsystems.com

STANDARD PARAMETERS TURBO SERIESMachine Speed, Sweeps/Minute Up to 10Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 40-56 (1220-1420)Standard TOC, Inches (mm) 12 (360)Minimum Pallet Conveyor TOC, Inches (mm) 12 (305)Standard Tin Line (TL), Inches (mm) 156 (3952)Minimum Tin Line (TL), Inches (mm) 144 (3656)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 1/2” NPT

PLATFORM

TIN LINE

C LC L

INFE

EDFU

LL P

ALL

ET

DISCHARGEDUNNAGE

TOC

HOIST

DISCHARGEEMPTY PALLET

OPTIONAL OPERATOR PLATFORM

HOIST

MACHINEC LC L

C LC L


CLASSIC “W” SERIES™

Bulk Depalletizer

FEATURES MODELSW3001 W3002 W4001 W4002 W5001 W5002

Semi-Automatic Sweep Functions S O S O S OAutomatic Sweep Function • S • S • SManual Sheet Removal S • S • S •Automatic Single-Stage Sheet Removal O S O S O SAutomatic Dual-Stage Sheet Removal • • • • • •Manual Top Frame Removal S • S • S •Automatic Single-Stage Top Frame Removal O S O S O SAutomatic Dual-Stage Top Frame Removal • • • • • •Semi-Automatic Pallet Change Cycle S • S • S •Automatic Pallet Change Cycle • S • S • SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • • • • •Monochrome Touch Screen Operator Interface • S • S • SColor Touch Screen Operator Interface • O • O • OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC O O O O O OAdditional Dunnage Capacity and Collation • • • • • •Pallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O

CONTAINERS MODELSW3001 W3002 W4001 W4002 W5001 W5002





• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


STANDARD PARAMETERS CLASSIC “W” SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 40-56 (1220-1420)Standard TOC, Inches (mm) 12 (306)Minimum Pallet Conveyor TOC, Inches (mm) 12 (305)Standard Tin Line (TL), Inches (mm) 156 (3952)Minimum Tin Line (TL), Inches (mm) 144 (3656)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT


ADVANTAGE SERIES™

Bulk Depalletizer

FEATURES MODELSAS3003 AS3004 AS4003 AS4004 AS5003 AS5004

Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Removal • • • • • •Automatic Single-Stage Sheet Removal S S S S S SAutomatic Dual-Stage Sheet Removal • O • O • OManual Top Frame Removal • • • • • •Automatic Single-Stage Top Frame Removal S • S • S •Automatic Dual-Stage Top Frame Removal • O • O • OSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • • • • •Monochrome Touch Screen Operator Interface S S S S S SColor Touch Screen Operator Interface O O O O O OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC • • • • • •Additional Dunnage Capacity and Collation • O • O • OPallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O

CONTAINERS MODELSAS3003 AS3004 AS4003 AS4004 AS5003 AS5004





• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


STANDARD PARAMETERS ADVANTAGE SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-57 (1000-1450)OPTIONAL – Pallet Length Range, Inches (mm) 40-57 (1000-1450)Standard TOC, Inches (mm) 16 (450)Minimum Pallet Conveyor TOC, Inches (mm) 16 (455)Standard Tin Line (TL), Inches (mm) 40 (1015)Minimum Tin Line (TL), Inches (mm) 36 (915)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT


VIPER SERIES™

Bulk Palletizer

FEATURES MODELSV3003 V3004 V4003 V4004 V5003 V5004

Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Placement • • • • • •Automatic Single-Stage Sheet Placement S • • • S •Automatic Dual-Stage Sheet Placement • S S S • SManual Top Frame Placement • • • • • •Automatic Single-Stage Top Frame Placement S • • • S •Automatic Dual-Stage Top Frame Placement • S S S • SSelf Patterning • • • • • •Automatic Void-Free Patterning S S S S S SSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Injection • • • • • •Bottom Pallet Injection – High Speed S S • • S STop Pallet Injection • • S S • •Touch Screen Monochrome Operator Interface S S S S S STouch Screen Color Operator Interface O O O O O OAdditional Dunnage Capacity • O O O • OPallet Conveying O O O O O OContainer Conveying O O O O O O

CONTAINERS MODELSV3003 V3004 V4003 V4004 V5003 V5004





• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


VIPER SERIES™

Bulk Palletizer

STANDARD PARAMETERS VIPER SERIESMachine Speed, Sweeps/Minute Up to 10Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 48-56 (1220-1420)Standard TOC, Inches (mm) 13 (330)Minimum Pallet Conveyor TOC, Inches (mm) 13 (330)Standard Tin Line (TL), Inches (mm) 165 (4190)Minimum Tin Line (TL), Inches (mm) 156 (3860)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT


CLASSIC “R” SERIES™

Bulk Palletizer

FEATURES MODELSR3001 R3002 R4001 R4002 R5001 R5002

Semi-Automatic Sweep Functions S S S S S SAutomatic Sweep Function • O • O • OManual Sheet Placement S • S • S •Automatic Single-Stage Sheet Placement • S • S • SAutomatic Dual-Stage Sheet Placement • • • • • •Manual Top Frame Placement S • S • S •Automatic Single-Stage Top Frame Placement • S • S • SAutomatic Dual-Stage Top Frame Placement • • • • • •Self Patterning S S S S S SAutomatic Void-Free Patterning • • • • • •Semi-Automatic Pallet Change Cycle S • S • S •Automatic Pallet Change Cycle • S • S • SBottom Pallet Injection S S S S S SBottom Pallet Injection – High Speed • O • O • OTop Pallet Injection • • • • • •Touch Screen Monochrome Operator Interface • S • S • STouch Screen Color Operator Interface • O • O • OAdditional Dunnage Capacity • • • • • •Pallet Conveying O O O O O OContainer Conveying O O O O O O

CONTAINERS MODELSR3001 R3002 R4001 R4002 R5001 R5002

Glass Round S S • • • •Glass Non-Round • • • • • •Metal Round • • S S • •Metal Non-Round • • • • • •Plastic Round • • • • S SPlastic Non-Round • • • • • •Composite Round • • • • S SComposite Non-Round • • • • • •




• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


STANDARD PARAMETERS CLASSIC “R” SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-45 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 48-56 (1220-1420)Standard TOC, Inches (mm) 12Minimum Pallet Conveyor TOC, Inches (mm) 12Standard Tin Line (TL), Inches (mm) 165 (4190)Minimum Tin Line (TL), Inches (mm) 156 (3960)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT


ECLIPSE SERIES™

Bulk Palletizer

STANDARD PARAMETERS ECLIPSE SERIES

Machine Speed, Layers/Minute Up to 4Pallet Change Cycle, Seconds - UD 35Maximum Load Height, Inches (mm) 110 (2790)Maximum Layer Weight, Pounds (Kg) Up to 75 (35)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 37-57 (940-1450)OPTIONAL – Pallet Length Range, Inches (mm) 37-57 (940-1450)Maximum Capacity Of Empty Pallets 14Maximum Capaicty of Separator Sheet Stack 220Maximum capacity of Top Frame Stack 14Standard TOC, Inches (mm) 18 (450)Minimum Pallet Conveyor TOC, Inches (mm) 13 (330)Standard Tin Line (TL), Inches (mm) 40 (1015)Minimum Tin Line (TL), Inches (mm) 36 (915)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


ECLIPSE SERIES™

Bulk Palletizer


The Busse/SJI Bottle and Can Warmer is designed to meet the most exacting cold

filled beverage processing requirements. Built from the finest materials with first class

workmanship, our complete line of Warmers can process any container.

Completely re-engineered for the 21st century, the Busse/SJI Bottle and Can Warmer will

exceed your highest expectations. From a foundation of proven machine design principles,

Busse/SJI has developed and incorporated many new innovative features into a truly superior

Warmer design.

SJI WARMERS

Multiple pumping & heating zones for precise process

control.



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


SJI WARMERS

Key Standard Features

• All stainless steel T304 construction.• Precise automated seam welding.• Stainless steel drive and idle shafts.• Babbitted center bearings for durability

and long life.• Heavy duty polypropylene transport

chain.• Stainless steel piping systems.• Sloped sump bottoms for easier

cleaning.• High volume, low pressure close

coupled stainless steel spray pumps.• Double screen drop boxes.• Isolation valves for quick change pump

maintenance.• Large orifice spray nozzles to eliminate

nozzle plugging.

• Wide angle full cone spray pattern for reduced nozzle count.

• Flow-Through transport bed for maximum heat transfer.

• Large access doors for easy cleanout.• Thermometers and Pressure gauges at

all pump headers.• Heavy duty shaft mounted main drive.• Inside belt returns for drip free plant

floors.• NEMA 4X control panel with micro PLC

and AC inverter for main warmer drive.• Air knife water blow off system.• Pre-wiring of warmer with rigid

galvanized conduit.

Available Options

• High or low pressure steam shell and tube water heating systems.

• Gas fired water heating systems.• Condensate return pumps.• Observation windows. • Marine lighting.• Forced air evacuation to control

overheat. • Rotary spray Clean-In-Place or Boil-Out

systems.• Advanced PLC controls with graphical

user interface.

• Custom designed and precision fit infeed and discharge conveyor systems.

• Dynamic transfers and small pitch transport chain for “no deadplate” transfers.

• Automatic water temperature control/dew point monitoring systems.

• Discharge line switch shutdown system.• Continuous internal CIP system.


SJI COOLERS

Shaft mounted main drive for safety and durability.

The Busse/SJI Spray Cooler is designed to meet the most exacting hot-filled container

processing requirements. Busse/SJI cooler technology has been developed over years of

extensive research and successful installations. Mastering the science of product cooling,

Busse/SJI serves the ever-changing food and beverage industry with the most innovative

coolers to be a world leader in coolers and product handling systems. Meeting the exact

requirements of rigid or flexible container processing, we deliver reliable performance

together with responsible water conservation methods.



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


SJI COOLERS

Available Options• Internal evaporative cooling package

for maximum water savings.• Glass tempering zones with direct

steam injection water heating systems.• Hot water pasteurizing systems with

precision temperature control.• Closed loop external evaporative

cooling tower heat exchanger systems.• Observation windows and marine

lighting.• Rotary spray Clean-In-Place or Boil-Out

systems.• Double screened drop boxes and

pressure strainers.

• Advanced PLC controls with graphical user interface.

• Custom designed and precision fit arrowhead infeed and discharge conveyor systems.

• Dynamic transfers and small pitch transport chain to eliminate deadplate transfers.

• Short stroke continuous motion push-arm for non-round container loading.

• Automatic water temperature control/dew point monitoring systems.

• Discharge line switch shutdown system.

Key Standard Features

• All stainless steel T304 construction.• Precise automated seam welding.• Stainless drive and idle steel shafts.• Babbitted center bearings for durability

and long life.• Heavy duty polypropylene transport chain.• Stainless steel piping systems.• Sloped sump bottoms for easier cleaning.• High volume, low pressure close

coupled spray pumps.• High flow basket suction strainers.• Isolation valves for quick change

pump maintenance.• Large orifice spray nozzles to eliminate

nozzle plugging.

• Wide angle full cone spray pattern for reduced nozzle count.

• Flow-Through transport bed for maximum heat transfer.

• Large access doors for easy cleanout.• Thermometers and pressure gauges at

all pump headers.• Heavy duty shaft mounted main drive.• Inside belt returns for drip free plant

floors.• NEMA 4X control panel with micro PLC

and AC inverter for main cooler drive.• Air knife water blow off system.• Pre-wiring of cooler with rigid

galvanized conduit.

FRESHAIR

FRESHAIR

FRESHAIR

FRES

HA

IRIN

LET

#1

FRES

HA

IRIN

LET

#2

FRES

HA

IRIN

LET

#3

EXHAUSTBLOWER

#1

EXHAUSTBLOWER

#2

EXHAUSTOUTLET

#1

EXHAUSTOUTLET

#2

FL

OWF

LO

W

FL

OWFL

OW

FL

OW

REFILL &WATER INLET,

AUX. COOLING

CO

NTR

OL

PA

NEL

REFILLWATER INLET

INLETSTEAM

CO

OLER

DR

IVE

AIR KNIFEBLOWER

PANELCONTROL

WATER INLETRINSE SPRAYS

AUX. COOLING

WATER INLET&

MAINDRAIN

COOLING ZONE #1TEMPERATURECONTROLLER

TEMPER ZONETEMPERATURECONTROLLER


FLOOR

FRESHAIR

FRESHAIR

FRESHAIR

FRES

HA

IRIN

LET

#1

FRES

HA

IRIN

LET

#2

FRES

HA

IRIN

LET

#3

EXHAUSTBLOWER

#1

EXHAUSTBLOWER

#2

EXHAUSTOUTLET

#1

EXHAUSTOUTLET

#2

FL

OWF

LO

W

FL

OWFL

OW

FL

OW

REFILL &WATER INLET,

AUX. COOLING

CO

NTR

OL

PA

NEL

REFILLWATER INLET

INLETSTEAM

CO

OLER

DR

IVE

AIR KNIFEBLOWER

PANELCONTROL

WATER INLETRINSE SPRAYS

AUX. COOLING

WATER INLET&

MAINDRAIN


TEMPER ZONETEMPERATURECONTROLLER


FLOOR


BULK CONTAINER RECEIVING SYSTEM & LOADING SYSTEM

Busse/SJI, the leader in container handling technology for over 50 years, proudly presents the ‘Bulk Container Receiving System’.

Developed to automate the truck unloading process, the Bulk Container Receiving System eliminates fork truck requirements, thus reducing labor and human error.

Whether your business requires container handling solutions or pallet handling solutions,

Busse/SJI has the right offering for your application.

TO D

EPA

LTO

DEP

AL

DU

NN

AG

EFL

OW

DU

NN

AG

EFL

OW

FULL

PA

LLET

FLO

WFU

LL P

ALL

ETFL

OW

TRU

CK

LO

AD

ING

/UN

LOA

DIN

G D

OC

KS



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


BULK CONTAINER RECEIVING SYSTEM & LOADING SYSTEM

Bulk Container Receiving System Features & Benefits

• Dual Chain Driven Live Roller Skewed Roller Conveyors. - 2½” diameter rollers - Rollers skewed in the middle portion

of the conveyor for separation or combining of loads

- Independent drives for each side- Side motor mounts with direct drive

hollow shaft gearboxes

• Bulk Loading/Unloading Tandem Air Chain Accumulation Conveyors.- 14” formed channel frames- 45” effective width- Center drive design allows for

reversible operation - Dual 60 drive chain riding on a UHMW

wear strip- Side motor mounts with flange

mounted hollow shaft gearboxes- Solenoid valve for each 5 ft.

accumulation zone- Independent staging zone for each

pallet

• Chain Driven Live Roller Conveyors.- 6” formed channel frames - 2½” diameter rollers - Side motor mounts with direct drive

hollow shaft gearboxes

• Transfer Car.- Dual CDLR Conveyors with

independent drives- 1½” x 6” floor rail system- 10” diameter steel drive wheels- 6” diameter steel idle wheels- Time of flight sensor for positioning- IGUS Cable Track for power

transmission

TOC

LOA

DIN

GD

ISC

HA

RG

E

REC

EIV

ING

LA

NE

LOA

DIN

GLA

NE

TOC

INFE

EDR

ECEI

VIN

G

TOC

LOA

DIN

GD

ISC

HA

RG

E

TOC

REC

EIV

ING

INFE

ED

CL

CL

CL

CL


The “Hawk” is designed to handle a wide variety of layer sheet sortation and inspection needs. The “Hawk” Series Sheet Inspection System takes a stack of misaligned layer sheets and feeds them one at a time onto an alignment bed where they are inspected manually or with an optional automatic vision system. The individual sheets are then fed into a stacking bin where they are squared and stacked such that they can be loaded directly into a palletizer. The system is completely adaptable to accommodate our customer’s specific requirements.

HAWK SERIES™

Sheet Inspection System



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


Hawk Series Sheet Inspection System Features & Benefits

• Source Hoist – Receives a stack of unsorted sheets and indexes the stack up to a level just below the sheet pick up head.

• Automatic Top Frame Detection and Separation – vision system scans the top of the load for a top frame after each sheet is removed from the stack. If no top frame is present, the sheet feeder will continue to remove sheets. If a top frame is present, the automatic top frame remover will remove it and place it in the top frame hoist.

• Top Frame Hoist – receives top frames and aligns them as they are placed on the pallet to ensure an orderly stack.

• Dry Trash Removal System – spiral bound rotating brushes inside a vacuum chamber to dislodge and remove debris from the sheet.

• Vision Inspection System – can be configured to meet your specific requirements. The basic system is capable of detecting tears and major deformities. Our more complex system

incorporates programmable intelligence to omit specified sections of the sheets which contain lettering and/or other intentional markings while still using the edge tools to detect edge deformities.

• Target Sheet Hoists – system is configurable to allow a single target hoist for good sheets and a hopper for reject sheets to a more complex system with multiple target hoists where a sheet can be sent to a specific hoist based on decisions made during the inspection process.

• High Capacity Hoists – allowing up to 48” stack height at the infeed to the system and at each target hoist.

• Palletless Capabilities – Target hoist can be built with conventional pallet conveyors or as a palletless system for handling stacks of sheets without pallets.

• Empty Pallet Conveyor System a completely configurable system to transfer empty pallets from the source hoist to a pallet stacker/dispenser and then onto the various target hoists.

OPERATOR PLATFORM

MACHINE CL

LAYER SHEET ELEVATION

TOC

CL CONV.

DISCHARGEBAD LAYER SHEET

CL CONVEYOR

HOIST

SECONDARY TARGET HOIST

TARGET HOIST

VACUUM

VISION INSPECTION

INFEED/DISCHARGEEMPTY PALLET

CL CONVEYOR CL CONVEYOR

DISCHARGETOP FRAME

INFEEDLAYER SHEET

DISCHARGEGOOD LAYER SHEET

STEP

PLATFORMOPERATOR

TOP FRAME

SOURCE BIN

CONV. CL

CL CONVEYOR

CL CONVEYOR

CL CL

HAWK SERIES™

Sheet Inspection System


Busse/SJI Field Service Offerings

On-Site Equipment Services:■ Initial Start-up / Commissioning

Ensure maximum performance from new equipment by having it professionally commissioned in your facility. Busse/SJI electrical control engineers can provide coordinated line integration with all of the related equipment from the depalletizer to the pallet conveyor in the warehouse.

■ Technical Support / Troubleshooting When a new container must be handled, or a problem arises, we can visit your facility to as-

sist. Electrical controls engineers are available for on-site line audits. We can provide recom-mendations for increased system efficiencies through the use of state of the art controls.

■ Rebuilds / Modifications Add new life to existing Busse/SJI machines by having factory trained personnel refurbish them on-site. Busse/SJI equipment can be modified on-site to provide enhanced performance as your line requirements grow.

■ Retrofits / Kit Installation As Busse/SJI designs keep pace with the latest technology, we offer on-site services to improve your existing machines. Some examples: changing from relay logic to PLC control, converting from hydraulic power to electric operation.

Spare Parts:■ Largest Parts Inventory Specific to Palletizers & Depalletizers As the oldest manufacturer of Palletizing and Depalletizing equipment, we stock the parts

needed to keep them running year after year.

■ Initial Spares Program We are proud to offer customized comprehensive spare parts lists with all new equipment.

These lists are compiled to ensure that the customer is protected from costly down-time due to unexpected component failure.

■ Providing Only O.E.M. Parts Busse/SJI will never substitute inferior quality parts. We provide only the original equipment parts your equipment was designed to use.

■ Emergency Shipments Busse/SJI provides emergency parts shipments seven days per week.

■ Specialized Parts Knowledge As the world’s oldest manufacturer of Palletizing and Depalletizing equipment, we are familiar with your equipment. We provide obsolete parts cross-reference services to ensure your Busse/SJI machine never stops running.

After Sale Service

Comprehensive Support:■ Manage All Warranties

Busse/SJI acts as a warranty clearing house for all the non-Busse/SJI components on our machines. Simply contact Busse/SJI when an in warranty component fails, and Busse/SJI will arrange for it to be replaced.

■ On-Going Audits of Machines and Systems Enjoy the peace of mind that knowing your Busse/SJI equipment is in top condition brings. Busse/SJI offers regularly scheduled audits to catch problems before they can cause costly down-time.

■ 24-Hour Hot Line Customers can call the Busse/SJI Hot Line (800-882-4995 In U.S. and Canada) or (920-326-6348 Internationally) 24 hour a day, 7 days a week. They will reach a manned answering service who will in turn page the on-call hot line responder. The hot line responders are carefully chosen to have a high likelihood of being able to answer questions and solve problems directly. This expedites the resolution of problems and limits the need for escalation. This is a FREE service.

29



• Coolers





• Gripper Rinsers




• Singlefilers

• Sorting Systems

• Warmers



• Integration



and Training



• Machine Audits


Resources & Capabilities

Training:■ Dedicated Training Personnel Busse-SJI employs training professionals whose only job is training our

customers.

■ Customized Formal Classroom Training All Busse/SJI training packages are customized to a specific machine.

No two Depalletizer or Palletizer training classes are alike. This approach guarantees that all class time will be germane to your individual machine.

■ On-Site Training On Your Equipment In addition to customized classroom training, hands-on training on your

machine guarantees competency. Our instructor will cause a fault, or problem, to occur, and then allow each student to demonstrate ability to recover and re-start the machine.

■ Customized Training Materials Each training manual is specially prepared using the drawings, schematics,

and PLC program documentation from which your equipment was built.

■ Many Class Types Operator Supervisor Troubleshooting Maintenance Refresher Preventive Maintenance

Domestic Installation Services:■ Turn-Key Installation of Busse/SJI Equipment From the moment your new Busse/SJI equipment arrives at your loading

dock until it is smoothly operating at peak efficiency, Busse/SJI can be there. We offer packages that include mechanical installation, electrical installation, start-up, and training.

■ Relocation of Busse/SJI and Other Manufacturer’s Equipment Busse/SJI offers relocation services for their own and other manufactures’ equipment. If the move is across the plant or halfway across the country, Busse/SJI can make it happen.

Domestic & International Installation Services:■ Installation Supervision

Ensure that your installation crew operates at peak efficiency by having a Busse/SJI trained installer supervising the installation of your new, or used, equipment.

920.235.5562Fax: 920.235.3638

www.arrowheadconveyor.com

The Dominant Force in Material Handling

TM

Documents

The Dominant Force in Material Handling - EquipNet · Standard TOC, Inches (mm) 12 (360) Minimum Pallet Conveyor TOC, Inches (mm) 12 (305) Standard Tin Line (TL), Inches (mm) 156