TERACOM MODEM CONFIGURATIONAccessing the Router

Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.1.1.Step 2 In the Login page that is displayed, enter the username and password.The username and password of the administrator are admin and admin

After Click on OK. This page will be displayed

After click on interface setup This page will be displayed

Set VPI : 0 (ZERO)Set VCI : 35 (THIRTY FIVE)Encapsulation : PPPoA/PPPoE Set User name & password, as per CDR Detail.Set Encapsulation : PPPoE LLCSet Default Route : YESDo not change any other parameters.Click on SAVE.

After click on wireless This page will be displayed

Set SSID value as per customer choice or BSNL.

Select WEP-64Bits in Authentication Type

WEB-64Bits keyFor key, please enter either (1) 5 characters excluding symbols, or (2) 10 characters ranging from 0~9, a, b, c, d, e, f.

Set key#1 value

Set Wireless MAC Address Filter to DEACTIVATED, then Click on SAVE

After click on Maintenance This page will be displayed

After click on Sys Restart, this page will be displayedSelect Current Settings, then click on RESTART

Wait up to SYSTEM RESTART shown 100%

For any other modem configuration pl. Click on

http://www.calcutta.bsnl.co.in/BB/dataoneinstall/menu.html

THANKS