Upload
fghabboon
View
212
Download
0
Embed Size (px)
Citation preview
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 1/65
Basic Selection & Proper Application
of Overhead Air Distribution Devices
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 2/65
GRD Selection & Application
• Terms
• Selection
– Throw – Sound
• Installation Variations affect Performance
• Inlet Effects
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 3/65
Basics
Coanda
Total
Air
Primary Air
Induced
Room Air
Entrained
Room Air
Return Air
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 4/65
Basics
• ASHRAE Standard 70-2006
– Standard Defines Testing Procedures,
Spaces, and Equipment
– Isothermal Testing
– Non-Turbulent, Smooth Inlet Conditions
– Obtain Catalog Data
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 5/65
Selection – Throw
1) Throw – Distance to a specified Vt
2) Terminal Velocity (Vt) – Maximum
airstream velocity at the end of a throw.
50 fpm TV
100 fpm TV150 fpm TV
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 6/65
Selection – Throw
• Outlet Patterns – 150 cfm – 6” Inlet
Plaque- 6’
Slot - 19’ Slot - 29’
Perf - 10’Louver
Face - 16’
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 7/65
Selection – Throw
• 380 cfm, 10” Neck, 700 fpm, T50
10‟ Square Cone
9‟ Round Cone
14‟ 4 Way - Perf Curved Vane
33‟ 1 Way - Perf Curved Vane
24‟ 4 Way - Louver Face
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 8/65
Selection – Throw
• Deflection and Spread
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 9/65
Selection – Throw
• Throw Boundaries – Mapping
Vt Maximum of 75 fpm
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 10/65
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 11/65
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 12/65
Selection – Throw
Tested in accordance with ASHRAE Standard 70-2006 “Method ofTesting for Performance of Air Outlets and Inlets.”
Radii of diffusion are given in feet to terminal velocities of 150 fpm (minimum),100 fpm (middle) and 50 fpm (maximum).
Throw data is based on supply air and room air being at isothermal conditions.
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 13/65
Selection – Throw
• Non-Isothermal Effects
Adjust Throw at V t = 50 fpm
1% Per° F of Differential
Cooling Heating
Horizontal – +
Vertical + –
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 14/65
Selection – Throw
• Exposed Mount vs. Surface Mount
Exposed MountReduce Throw
30%
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 15/65
• Locate in from wall
• Discharge to perimeter • Generally slot diffusers
• Cooling Airflow – 50 fpm at
floor
• Heating Airflow – 50 fpm at2/3 down the wall
Heating & Cooling w/ OHAD
Selection – Throw
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 16/65
Selection – Throw
• Obstructions
– Air jet will typically remain on surface, if angle
created by the ceiling, diffuser, and bottom of
obstruction is <10°. – From testing, angle can be as great as 15°.
<10°
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 17/65
Selection – Sound
• Catalog Data
– NC Rating
• Average Room Size
• Distance from Source
– Assumes 10 dB Room Absorption
– Single Diffuser or Standard Length
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 18/65
Selection – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 19/65
Selection – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 20/65
Selection – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 21/65
24” x 24” Diffuser, 380cfm, 700 fpm Neck Velocity
3-21
Selection – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 22/65
NC 45
3-22
Selection – Sound
NC 37
NC 36NC 31
1 - 1”Slot, 4‟, 270cfm, 800 fpm Neck Velocity
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 23/65
3-23
Installation – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 24/65
3-24
Installation – Sound
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 25/65
Balancing Dampers
• Some outlets cataloged with damper in open position
• Sound Increase depends on:
– damper design
– ratio of throttled pressure over cataloged pressure drop
3-25
Installation – Sound
Pressure Ratio 1.5 2 3 4
dB/NC Increase 4 6 13 18
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 26/65
Damper Location
Pressure Ratio = 2
(normal pressure
drop X 2)
3-26
Installation – Sound
0 dB
+ 3 dB
+ 9 dB
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 27/65
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 28/65
ASHRAE Standard 70 – Throw Room
• Measurements taken in a „Standard Test Room‟
– Height => 9‟
– Minimum Length = 24‟
– Minimum Width = 18‟
– All lights and windows shall be flush to the surface they
are attached.
– Air exhausted away from supply path.
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 29/65
• 2 Different Types of Test Ducts
– Large Pressurized plenum
– 3 Diameters Straight duct• Air outlet device is to receive uniformly
distributed air from the supply duct.
ASHRAE Standard 70 – Inlet Conditions
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 30/65
Effect of Inlet Conditions on Throw
• Test Standard Installation
– Repeatable, uniform throw distances
– Repeatable, drop
– Repeatable, discharge pattern
• Hard 90 Degree Elbow
• Flex Duct 90 Degree Elbow
• Radial Opposed Blade Damper • Butterfly Damper
• Bowtie Damper
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 31/65
A “Special” Field Installation
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 32/65
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 33/65
More Poor Workmanship Examples
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 34/65
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 35/65
Louver Face Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 36/65
L F C ili Diff
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 37/65
Louver Face Ceiling Diffuser - Test Standard Installation
350 CFM
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 38/65
Louver Face Ceiling Diffuser - Hard 90 Degree Elbow
350 CFM
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 39/65
Louver Face Ceiling Diffuser - Flex Duct 90 Degree Elbow
350 CFM
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 40/65
AHHHH!! FLEX MONSTER!!
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 41/65
Louver Face Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 42/65
Louver Face Ceiling Diffuser -
Butterfly Damper
350 CFM – Damper set for 0.25 inches of water
L F C ili Diff
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 43/65
Louver Face Ceiling Diffuser -
Bowtie Damper
350 CFM – Damper set for 0.25 inches of water
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 44/65
More Poor Workmanship Examples
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 45/65
Plaque Ceiling Diffuser
C ff
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 46/65
Plaque Ceiling Diffuser
Pl C ili Diff
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 47/65
Plaque Ceiling Diffuser
Plaque Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 48/65
Plaque Ceiling Diffuser - Test Standard Installation
350 CFM
Plaque Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 49/65
Plaque Ceiling Diffuser - Hard 90 Degree Elbow
350 CFM
Plaque Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 50/65
Plaque Ceiling Diffuser - Flex Duct 90 Degree Elbow
350 CFM
Plaque Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 51/65
Plaque Ceiling Diffuser - Radial Opposed Blade Damper
350 CFM – Damper set for 0.25 inches of water
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 52/65
Plaque Ceiling Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 53/65
Plaque Ceiling Diffuser - Bowtie Damper
350 CFM – Damper set for 0.25 inches of water
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 54/65
Ceiling Slot Diffuser
Square Plenum
Sloped Plenum
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 55/65
Ceiling Slot Diffuser
Ceiling Slot Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 56/65
Ceiling Slot Diffuser
- Test Standard Installation
350 CFM with straight plenum
350 CFM with sloped plenum
Ceiling Slot Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 57/65
Ceiling Slot Diffuser- Hard 90 Degree Elbow
350 CFM with straight plenum
350 CFM with sloped plenum
Ceiling Slot Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 58/65
g- Flex Duct 90 Degree Elbow
350 CFM with straight plenum
350 CFM with sloped plenum
Ceiling Slot Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 59/65
Ceiling Slot Diffuser- Radial Opposed Blade Damper
350 CFM with straight plenum (dpr set to .25inWC)
350 CFM with sloped plenum
(dpr set to .25inWC)
Ceiling Slot Diffuser
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 60/65
g- Butterfly Damper
350 CFM with straight plenum (dpr set to .25inWC)
350 CFM with sloped plenum
(dpr set to .25inWC)
C ili Sl t Diff
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 61/65
Ceiling Slot Diffuser- Bowtie Damper
350 CFM with straight plenum (dpr set to .25inWC)
350 CFM with sloped plenum(dpr set to .25inWC)
W k hi C t !
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 62/65
Workmanship Counts!
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 63/65
Sidewall Grille Video (12X6)
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 64/65
Sidewall Grille Video (12X6)
0 Dia 1 Dia
2 Dia 3 Dia
8/9/2019 Tc Fundamentals 2011 Grd Basic Selection and Application (1)
http://slidepdf.com/reader/full/tc-fundamentals-2011-grd-basic-selection-and-application-1 65/65
GRD Selection & Application
• Terms
• Selection
– Throw
– Sound
• Installation Variations affect Performance
• Inlet Effects