Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
TEKFENMANUFACTURING
TAILORS OF STEEL
3
At Tekfen Manufacturing and Engineering (Tekfen İmalat ve Mühendislik), we engineer, manufacture and construct process and storage equipment for the oil, petrochemical, and chemical industries and for industrial facilities such as gas, iron and steel, and power plants. Our product portfolio ranges from cylindrical and spherical storage tanks to heat exchangers, pressure vessels, process columns and pressurized piping.
We do our job with great love and dedication. And when we look at all the hard work we put in every piece we have produced with much care over the years, we proudly call ourselves “Tailors of Steel.”
WE ENGINEER, MANUFACTUREAND CONSTRUCT...
Set up in 1970 as a Tekfen Group Company, Tekfen Manufacturing has since accumulated a sound know-how, almost half a century of experience and has forged itself a firm reputation for its expertise and reliability in engineering, manufacturing and construction works for process and storage equipment.
Our heavy manufacturing facility is located at Derince-Kocaeli, on the northeastern shore of the Marmara’s İzmit Bay on an area of 48,500 m², 19,250 m² of which is covered halls. The plant is ideally located, as it is adjacent to the International Port of Derince, as well as the railway and the highway.
Tekfen Manufacturing’s customers include international contracting companies and domestic and foreign companies in the petroleum refining, petrochemical and LPG storage and distibution services.
Tekfen Manufacturing is qualified to work with all sorts of carbon steel (including high tensile quenched and tempered), clad carbon steel, all types of stainless steel (including duplex, superduplex), non-ferrous materials such as monel, inconel, brass, aluminum, titanium etc.
A FEW MORE WORDS ABOUT USWe engineer and manufacture;
• Floating, dome and cone roof bulk storage petroleum tanks up to 200,000 m³ capacity, low and high pressure spherical tanks, low temperature and cryogenic double wall tanks,
• Pressure vessels such as drums, reactors, • Process columns,• Shell and tube type heat exchangers, • Air cooled heat exchangers,• Above and underground large storage tanks,• Semi-trailers and road tankers for LPG,
ammonia and similar liquefied gases,• Waste heat recovery steam generators,• Pressurized piping,• Heavy structural steel fabrication, such as
steel ladles, galvanization baths, press steel structures, turbine casings.
In addition to engineering and manufacturing, we also undertake;
• Site construction of cylindrical and spherical storage tanks, process columns, etc.,
• Turn-key tank farms, storage terminals including sea and land loading/unloading facilities,
• Waste heat recovery systems,• Complete factories.
4 5
1970Tekfen İmalat was founded with a workshop of 2,000 m² closed area in Derince, İzmit, Turkey.
1974Large contract with İGSAŞ (Eng: UHDE) for 68 ea equipments (pressure vessels, columns, stack, double wall tanks, etc.).
1978Derince workshop
expansion to 6,000 m².
1979Large contract with İPRAŞ (Eng: BADGER)
for the refinery expansion project (columns, pressure vessels, 40 ea heat
exchangers, etc.).
1982Large contract with PETKİM Petrochemical Co. (Eng: Stone and Webster, Mitsui, etc.) for their new İzmir Plant (columns, pressure vessels, 59 ea heat exchangers, spherical tanks, etc.).
1983Development of in-house engineering design for spherical tanks.
1984Fabrication of 6 ea spherical
tanks for NIGC-Iran.
1990Fabrication of tanks, pressure vessels, heat exchangers and complete electro-mechanical
site erection works of Industrial Yarn Production Plant for DUSA.
199160 ea pressure vessels and columns for İzmir Refinery Hydrocraking Plant (Snamprogetti).
199451 ea pressure vessels and columns for İzmit Refinery Unicraking Plant (Snamprogetti). 1995
ISO 9001 Certified.
1998ASME U-Stamp Certified.
200038 ea PV & columns for İzmit Refinery Isomerisation Plant (Tecnicas Reunidas).
2004Supply of 7 ea 150,000 m³ crude oil floating roof tanks for BOTAŞ.
2005Supply of 8 ea 100,000 m³ crude oil floating roof tanks for KOC-Kuwait.
2012Extension of Derince Factory to 19,250 m².Supply of 7 ea 3,000 m³ LPG spheres for SPC-Sudan.
2009Extension of Derince Factory to 11,000 m² and investment for new major machinery (hydraulic press, rolling machine, flanging machine, CNC plasma cutting machine).
2011Supply and erection of 10 ea 5,000 m³ LPG spheres
for Petrol Ofisi - OMV.
2013 ISO 14001 and
OHSAS 18001 Certified.2017ISO 27001 Certified.Fabrication with titanium material.
2015Supply and erection of 7 ea 5,000 m³ LPG spheres of Aytemiz Alanya Terminal.
MILESTONES(1970-2017)
6
• Cutting (oxygen, plasma, mechanical)
• Cold forming (rolling, pressing, flanging)
• Machining • Drilling• Fit-up• Assembly• Tube expanding• Welding (SMAW, SAW, GMAW,
GTAW, FCAW, ESW)• Weld overlay (SAW, ESW)• Orbital welding• Post-weld heat treatment (furnace
and local)• Ultrasonic shot peening• Surface preparation (sandblasting
and grid-blasting)• Painting• Pickling
Our non-destructive examination methods:
• Radiographic Examination• Ultrasonic Examination
(Conventional and TOFD/PA Methods)
• Liquid Penetrant Examination• Magnetic Particle Examination• Visual Examination• Pressure Test• Leakage (Bubble) Test• Positive Material Identification
(PMI)
OUR MANUFACTURING AND INSPECTION PROCESSES
7
Tekfen Manufacturing has almost half a century of experience in process and storage equipment.
RUSSIAPressure vessels
PAKISTANSpherical tanks
SAUDI ARABIASpherical tanks
OMANSpherical tanks and pressure vessels
QATARPressure vessels
SENEGALSpherical tanks
KAZAKHSTANPressure vessels
LEBANONSpherical tanks and mounded bullets
KUWAITCylindrical tanks
LIBYASpherical tanks
MOROCCOCylindrical and spherical tanks
NIGERIASpherical tanks
AZERBAIJANCylindrical and spherical tanks
IRANSpherical tanks
IRAQCylindrical and spherical tanks
EGYPTSpherical tanks
ALGERIAPressure vessels
CYPRUSSpherical tanks
TURKMENISTANPressure vessels, columns, heat exchangers
SYRIASpherical tanks and pressure vessels
SUDANSpherical tanks and pressure vessels
TUNISIAPressure vessels
Tekfen Manufacturing has taken its services to a sprawling geography spanning from Nigeria to Kazakhstan through a great many number of challenging projects completed in 22 countries outside Turkey.
TODAY, WE ARE A WORLDWIDE BRAND
8
WE STRIVE TO EXCEL IN ENGINEERING
We have extensive experience in basic and detail mechanical design of all kinds of cylindrical and spherical storage tanks, pressure vessels, process columns, heat exchangers, reactors and pressurized piping according to international codes such as ASME, API, TEMA, AD-2000, EN 13445, CODAP, PD 5500.
Our work complies with the European Communities Directives PED 2014/68/EU, 99/36/EC, 87/404/EEC,as well as the latest editions of local and international earthquake regulations and other internationally accepted codes.
Upon request, we also provide thermal design for shell and tube type heat exchangers.
We carry out all our design calculations and drawings on internationally recognized softwares such as Compress, Aspen, AMETank, Bentley, SAP-2000 and in-house developed Mathcad applications.
9
The name Tekfen has been synonymous with quality and timely delivery for over 60 years.
WE DO NOT COMPROMISE ON QUALITYAt Tekfen Manufacturing, we do our best to assure a production and service quality that meets our customers’ demands and expectations at a competitive price level. Simply put, this means that the products we deliver fulfill all the necessary standards and comply with all required regulations. While doing this, we strictly follow Occupational Health and Safety measures and strive to be environment-conscious in our business.
We carry out our operations under ISO 9001:2015 Quality Management System, ISO 14001:2015 Environmental Management System, and OHSAS 18001:2007 Occupational Health and Safety Management System certifications. The company was most recently awarded ISO 27001:2013
Information Security Management System certification.
The Company works in accordance with industry-recognized international standards such as AD-2000 HP 0, TRD-100, EN ISO 3834-2 and PED 2014/68/EU certificates from TÜV, as well as ASME Code U, U2, R and S stamps and National Board Registration.
Our aim is highly productive operation in a state-of-the-art facility. It is only in this way, that we are able to achieve excellence through less repair, less reprocessing, zero discarded product, less customer complaint and minimum accident, all of which are prerequisites of reliable products for and long-term relationship with our clients.
10
ISO 9001 Certificate ISO 27001 Certificate ASME CODE U Stamp ASME CODE U2 Stamp ASME CODE S Stamp
AD2000-MerkblattHP 0 and PED
EN ISO 3834-2 and PEDOHSAS 18001 Certificate ISO 14001 Certificate National Board R Stamp National Board Authorization Certificate
Shah Deniz Phase 2 - Sangachal Land Terminal, Azerbaijan
11
We made as many as 155 spherical tanksso far!
Petrol Ofisi - Yarımca LPG Storage Facilities, Turkey
12
We design, fabricate and construct spherical tanks for storage of LPG, propane, butane, ammonia, ethylene, chlorine, etc. according to German AD-2000, ASME Sec. VIII Div. 1 and Div. 2, EN 13445, CODAP, BS 5500 and the latest editions of local and international earthquake regulations.
We deliver turn-key LPG plants with storage, loading, unloading, pumping, metering and control facilities.
To this day, Tekfen Manufacturing has been the main supplier of spherical tanks in Turkey and abroad, with capacities ranging from 500 to 7,000 m3 for various products. The Company also undertook the structural reinforcement of spherical tanks that have been damaged in the 1999 earthquake.
Our spherical tanks are also under operation in Pakistan, Libya, Iran, Lebanon, Syria, Saudi Arabia, Senegal, Sudan, Egypt, Oman, Iraq, Morocco, Azerbaijan, Nigeria and Cyprus.
SPHERICAL TANKS
13
LPG tank, Pakistan
LPG tanks, Sudan
Isobutane tanks, Sumgayit, Azerbaijan
Today, our factory has reacheda production capacity of 20,000 tons/year.
14
The storage tanks we have designed and fabricated up to date are according to API Std 650 (including Annexes A, C, E, F, H, I, J, M, S, P, V) and API Std 620 (including Annexes L, R) industry standards following customer requirements. Our fabrication capacity for cone roof, dome roof and floating roof tanks per API Std 650, goes above 200,000 m³. We are at the same time capable of delivering according to other internationally accepted codes such as EN 14015, AWWA D100.
Low pressure cold storage tanks either single or double wall type according to API Std 620 for LPG, ammonia and similar products are also in our line of activity.
Three ammonia tanks with 15,000 m³ and 20,000 m3 capacity operating at -36°C and two liquid oxygen cryogenic tanks of 1,000 m³ capacity operating at -193°C service temperature are among our references in this product group in Turkey.
Another area of expertise of Tekfen Manufacturing is the delivery of turn-key tank farms including engineering, fabrication and construction, piping and civil works.
BULK STORAGE TANKS
15
Baku-Tbilisi-Ceyhan Crude Oil Pipeline Land Terminal, Turkey
TÜPRAŞ RUP, Turkey
Eight tanks (4 dome roof, 2 cone roof,2 floating roof tanks) were fabricated byTekfen Manufacturing for Shah Deniz Phase 2 Sangachal Land Terminal, Azerbaijan
Nothing makes us happier than seeing a job well done.
16
Eight crude oil storage tanks, each with a net capacity of618 thousand barrels for Kuwait Oil Company - Ahmadi, Kuwait
17
Attention to the smallest details is part of our daily routine.
18
We are fabricating floating head, fixed tube-sheet, U-tube and other shell and tube type heat exchangers (horizontal or vertical, overhead condensers, evaporators, suction heaters, condensers and similar). Exchangers are designed and fabricated according to ASME Sec. VIII Div. 1 and Div. 2, AD-2000 or to other codes specified by the customer and to TEMA Class R, C or B.
In addition to carbon steel exchangers, we supply exchangers with various materials of construction such as all kinds of stainless steel, duplex steels, nickel alloys, copper alloys (admiralty or Cu/Ni tubes, naval brass tube-sheets) and titanium.
Exchangers for Turkish Petroleum Corporation with explosion bonded naval brass clad tube-sheets, admiralty tubes and brass baffles, overhead condensers for İzmit Petroleum Refinery with Cu/Ni alloy tubes, as well as titanium clad tube-sheets with titanium tubes for Petkim are but a few reference projects in our portfolio of heat exchangers.
We also perform thermal design for shell and tube type heat exchangers.
HEAT EXCHANGERS
19
In our job,size matters.20
We design and fabricate almost any size and shape of pressure vessels. Our reference list includes various drums and reactors manufactured for various industries.
In cases where the size or weight of the vessel exceeds transportation limits, we prefabricate the vessel in modules and assemble them at job-site.
All types of carbon steel, stainless steel and carbon steel clad with stainless steel, monel, brass and other clad materials are used for the fabrication of the above-mentioned equipment.
Our plant can handle pressure vessels up to 8,500 mm dia. and 100 mm steel thickness and 60 m length as one unit.
PRESSURE VESSELS
21
We take pride in contributing to our country’s growing industrial efficiency.
22
Process columns are the critical equipment for petroleum refineries, petrochemical, chemical and fertiliser industries. We perform mechanical design including wind and earthquake calculations, stress analyses and fabrication of process columns.
We manufacture almost any size and shape of columns and our reference list includes columns manufactured for various industries. Similarly to pressure vessels, in cases where the size or weight of the column exceeds transportation limits, we prefabricate the column in modules and assemble them at job-site.
All types of carbon steel, stainless steel and carbon steel clad with stainless steel, monel, brass and other clad materials are used for the fabrication of the above-mentioned equipment.
Columns up to 8,500 mm dia. and 100 mm steel thickness and 60 m length can be fabricated in one piece at our factory.
PROCESS COLUMNS
23
Tüpraş RUP - Turkey
24
A one-stop shop for turn-key solutions in tank farms.
25
Another area of expertise of Tekfen Manufacturing is the delivery of turn-key tank farms including engineering, fabrication and construction, piping and civil works.
To this day, Tekfen Manufacturing has been the main supplier of spherical tanks (pressurized gas spheres) in Turkey and abroad, with capacities ranging from 500 to 7,000 m³ for various products. We deliver turn-key LPG plants with storage, loading, unloading, pumping, measuring and control facilities, and tanker filling systems for the industry.
We also undertake HRSG systems on turn-key basis in collaboration with expert companies.
TURN-KEY PROJECTS
Tüpraş RUP - Turkey
HRS Tower and Heat Exchangers for Toros Agri Samsun Plant - Turkey
Tüpraş İzmir - Turkey Alanya LPG Terminal - Turkey
26
Pressurized Piping
We manufacture pipe spools and assemble power plant piping with ASME Code “S“ Symbol Stamp according to ASME Section I and boiler external piping according to ASME B31.1.
The Company has a considerable experience in all sorts of carbon steels, all types of stainless steels, low and high alloy steels, duplex steels and non-ferrous materials.
Steam Boilers
We fabricate boilers by collaborating with an expert international engineering company on project basis. To this day, we have constructed industrial water tube type boilers up to 150 t/hr capacity.
Heavy Structural Steel Construction
Blast furnace supporting structure and other heavy steel construction works are in our manufacturing programme.
Some of our reference projects are the construction of a reactor regenerator for Turkish Petroleum Corporation’s İzmir Refinery, the supporting construction of a 6,600 ton blast furnace for Erdemir, and steel structures for İskenderun and Afşin Elbistan-B power plants.
We fabricate steel ladles, galvanization baths, turbine casings and press structures for various industries and steel constructions of tyre curing presses are also included in our manufacturing programme.
Other Products and Systems
Since 1970, we have engineered and supplied complete vacuum plants, flare systems and waste heat recovery systems.
VARIOUS PROJECTS
Turbine casing for geothermal power plantPipe welding
Tekfen İmalat ve Mühendislik A.Ş. HEAD OFFICEAdress: Tekfen Tower, Büyükdere Caddesi No: 209 4. Levent, 34394 İstanbul, TURKEYTelephone: +90 (212) 357 00 60 (PBX)Fax: +90 (212) 357 00 61E-mail: [email protected]: http://www.tekfenim.com
FACTORYAdress: Deniz Mahallesi, Yeni Liman Yolu No: 17 41900 Derince, Kocaeli, TURKEYPost Box: PK: 10 Derince, Kocaeli, TURKEYTelephone: +90 (262) 229 28 30 (4 lines)Fax: +90 (262) 239 65 38E-mail: [email protected]