Quote:Date:

Issued to: CompanyCity State

Contact:

Flex RTDRotary Tower Deluxe, Semi-Automatic, Heavy-Duty, Stretch Wrapping Machine

PREPARED BY: RSM-Orion PackagingTitlePhoneEmail

This quotation is valid for a period of thirty (30) days from its issue date.

All information and design detail contained herein is consideredconfidential and proprietary to Orion and Pro Mach End-of-Line.

Stretch Wrappers Made with Pride in the USA

Flex RTD Page 2

KEY BENEFITS OF THE FLEX RTDThe Flex RTD provides your operation the most cost effective, feature-rich, durable and safe to operate semi-automatic wrapper on the market today. The Flex RTD is an excellent wrapper solution for abnormally heavy/lightweight/unstable loads, wash-down areas, to pallet-jack feed without ramps, or to install over a weigh scale.

The operator simply attaches the film to the load and presses the start button to begin the wrap cycle. After the pallet load is wrapped, the operator cuts the film and removes the load with a pallet jack, electric-walkie or forklift. The machine will wrap the load as you have pre-determined it to do, automatically adapting to the load size and shape (within specifications).

The film is pre-stretched (elongated) at 260% which “processes” the stretch film for maximum linear strength and load retention, while reducing material cost. Film Force-to-Load control is automatic, performing like cruise-control so the film constantly adapts to the load shape, size and machine operating speed, resulting in minimal film breaks at maximum stretch. Bottom line…Properly wrapped loads for reduced shipping damage and reduced material cost.

Functionality, uptime and safe interaction are all critical to your operation! The Orion Flex series designs include many standard features to enhance the machine’s performance, uptime and safe operator interaction (often options with competitive models).

OPERATIONAL features on the Flex RTD Easy to use Color Touch-Screen HMI Separate Top / Bottom Wrap Counts adjustable from 1-9 Separate Up / Down Film Carriage Speed Controls Automatic Film Force-to-Load Control Automatic Load Height Detection Photocell

DURABILITY features on the Flex RTD Precision RING BEARING Tower Support System Direct Chain/Sprocket Tower Drive Industrial PLC Controller AC Motors with Variable Frequency Drives Structural Steel Tube Frame

SAFE interaction features on the Flex RTD Photo Eye Obstacle detection Insta-Thread™ Film Carriage, “Drop-In” Film threading

OPERATIONAL SEQUENCE1. Pallet load is set under the tower rotational area via pallet-jack, electric-walkie, forklift, or loads may

be hand-stacked directly under the machine2. Operator attaches film to pallet or load and presses start button3. When wrap cycle is complete, operator cuts film (NOTE: InstaCut Option eliminates step #3)4. Driver removes wrapped load

Made with Pride in the USA

Flex RTD Page 3

Made with Pride in the USA

NEMA 12, UL Approved Control Panel

All AC Motors with Variable Frequency Drives

Ring Bearing Tower Support

IntelleVue - Deluxe Control Panel

Color Touch-Screen for Wrap Program, Adjustments

Tamper Resistant, Password Protection

Industrial Switches for E-Stop & Main Power

Lock-Out capable Main Power Switch

Ethernet port for remote connectivity diagnostics

Web based dashboard for remote viewing of machine data

USB port for easy uploading software updates

Cycle Counters & Fault Code Records

High / Low Turntable Speed Toggle

English & Spanish Languages

Flex RTD Page 4

STANDARD SPECIFICATIONSThe following Orion standards that will be used if required by your machinery or if purchased as options. If other brands are required, they will be considered deviations and will be priced accordingly.

Capacities Maximum Load Size 52"W x 52"L x 80"H Stretch Film 20” Wide, up to 110 gauge

Utilities 115/1/60, 20 Amp Electrical Service (Not suitable for GFIC)

Tower Structure, Support & Drive Precision Ring Bearing Tower Support System Up to 16 RPM Variable Speed with adjustable Soft-Start Heavy Duty Direct Chain & Sprocket Drive AC Drive Motor with Variable Frequency Drive Electronically Adjustable Acceleration/Deceleration

Control Features Deluxe Control Panel with Numerous Features Easy to use Color Touch-Screen HMI Panel Display for easiest operator use Password Protection for critical settings Wrap Program Recipes for quick change and well managed load wrapping 1 Touch High / Low Rotation Speed Toggle Industrial Programmable Logic Controller (Non-Proprietary) Industrial Switches for E-Stop & Main Power NEMA 12 Dust/Splash-Proof Control Enclosure Separate Top and Bottom 1-9 Wrap Count Selectors Separate Film Carriage Up/Down Speed Controls Photocell for Automatic Load Height Detection English / Spanish HMI Language choices 24 Volt DC Controls

Film Carriage, Stretch & Delivery 20" Orion Insta-Thread™ Powered PreStretch Film Delivery System 260% Standard Pre-Stretch (Sprocket changeable from 100% to 300%) AUTOMATIC Film Force-to-Load Control works like Cruise Control “Shock Absorber” Film Dancer Bar with Non-Wearing Sensor Precision Polyurethane Pre-Stretch Rollers for Consistent Film Yield AC Drive Motor with Variable Frequency Drive No Lube Belt Lift/Lower system with “Drop-Lock” Technology Multi-Point UHMW Precision Carriage Guidance System Insta-Sense™ Film Out/Broken Sensing Logic Touch-Screen Film Tension Control Adjustment Easy “Drop-In” Film Threading Design

Made with Pride in the USA

Flex RTD Page 5

***Please Note new motor regulations that take effect in June of 2016. These are rules/regulations from the US Department of Energy. A few things to keep in mind (see below):- Note: More material is used to make the motors more efficient. -All motor manufactures will need to follow the new regulations. -Orion is working with all of our motor manufactures to minimize the impact of design, cost & lead-time.

During this time Orion reserves the right to change motors to match engineering designs.

PRICE (F.O.B. ALEXANDRIA, MN)

BASE MACHINE PRICE QTY TOTAL

Flex RTD Base Machine $15,750

OPTION APPLICATION REQUIRED STANDARD OR NON-STANDARD COMPONENTS PRICE QTY TOTAL

TOTAL OF BASE MACHINE WITH REQUIRED COMPONENTS

OPTION ADDITIONAL OPTIONS TO CONSIDER PRICE QTY TOTAL

Made with Pride in the USA

Flex RTD Page 6

OPTIONS AVAILABLE (SOME OPTIONS MAY INCREASE LEAD TIMES)Option Description PricesRotary Arm & BaseR01 Mast for loads up to 95" - Wrapping loads 48’’ x48’’ (68" Dia) $1,350R02 Mast for loads up to 110" - Wrapping loads 48’’ x48’’ (68" Dia) $1,950R03 Mast for loads up to 80" with 2nd Leg Gantry- Wrapping loads 48’’ x48’’ (68" Dia) $2,400R04 Mast for loads up to 95" with 2nd Leg Gantry- Wrapping loads 48’’ x48’’ (68" Dia) $3,750R05 Mast for loads up to 110" with 2nd Leg Gantry- Wrapping loads 48’’ x48’’ (68" Dia) $4,350R10 Mast for loads up to 80" - Wrapping loads up to 54" x 54" (76" Dia) $500R11 Mast for loads up to 95" - Wrapping loads up to 54" x 54" (76" Dia) $1,850R12 Mast for loads up to 110" - Wrapping loads up to 54" x 54" (76" Dia) $2,450R13 Mast for loads up to 80" with 2nd Leg Gantry- Wrapping loads up to 54" x 54" (76" Dia) $2,900R14 Mast for loads up to 95" with 2nd Leg Gantry- Wrapping loads up to 54" x 54" (76" Dia) $4,250R15 Mast for loads up to 110" with 2nd Leg Gantry- Wrapping loads up to 54" x 54" (76" Dia) $4,850R20 Mast for loads up to 80" - Wrapping loads up to 58" x 58" (82" Dia) $500R21 Mast for loads up to 95" - Wrapping loads up to 58" x 58" (82" Dia) $1,850R22 Mast for loads up to 110" - Wrapping loads up to 58" x 58" (82" Dia) $2,450R23 Mast for loads up to 80" with 2nd Leg Gantry- Wrapping loads up to 58" x 58" (82" Dia) $2,900R24 Mast for loads up to 95" with 2nd Leg Gantry- Wrapping loads up to 58" x 58" (82" Dia) $4,250R25 Mast for loads up to 110" with 2nd Leg Gantry- Wrapping loads up to 58" x 58" (82" Dia) $4,850R43 Mast for loads up to 80" with 2nd Leg Gantry- Wrapping loads up to 65" x 65" (92" Dia) $3,400R44 Mast for loads up to 95" with 2nd Leg Gantry- Wrapping loads up to 65" x 65" (92" Dia) $4,750R45 Mast for loads up to 110" with 2nd Leg Gantry- Wrapping loads up to 65" x 65" (92" Dia) $5,350R53 Mast for loads up to 80" with 2nd Leg Gantry- Wrapping loads up to 70" x 70" (100" Dia) $3,900R54 Mast for loads up to 95" with 2nd Leg Gantry- Wrapping loads up to 70" x 70" (100" Dia) $5,250R55 Mast for loads up to 110" with 2nd Leg Gantry- Wrapping loads up to 70" x 70" (100" Dia) $5,850R60 Mast for loads up to 80" - With Manual Rotating Stand, allowing Dual & Triple Wrap Zones $5,995R61 Mast for loads up to 95" - With Manual Rotating Stand, allowing Dual & Triple Wrap Zones $7,345R62 Mast for loads up to 110" - With Manual Rotating Stand, allowing Dual & Triple Wrap Zones $7,945R99 Custom Arm or Tower RFQDriveD10 RT High Speed 22 RPM DRIVE ASSEMBLY HIGH SPEED 22 RPM - Upgrade from 16 RPM to 22

RPM Tower Rotation. Includes Gantry Frame and Safety Fence. (May not be compatible with some Mast/Expansion options)

$4,900

D99 Custom Drive RFQCarriageC21 20" Insta-Thread 260% Carriage with Insta-Cut Automatic Film Web Severance.

Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (Not available in Canada)

$795

C22 20’’ Insta-Thread 150% Carriage with Heavy Film upgrade for consistently running films above 110 gauges. Upgrades to 1HP Motor & VFD $795

C23 20" Insta-Thread 260% Carriage with Manual Roping for added load unitization and/or breathe- ability. Adjustable Roping down to Minimum 1" Web $495

C24 20" Insta-Thread 150% Carriage with Insta-Cut & Heavy Film $1,590C25 20’’ Insta-Thread 260% Carriage with Split-N-Rope $2,750C26 20" Insta-Thread 260% Carriage with Powered Roping for added load unitization and/or

breathe- ability. Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) Custom Programming and/or Multiple Preset Roping Programs available: Factory Quote

$4,995

Made with Pride in the USA

Flex RTD Page 7

C27 20" Insta-Thread 150% Carriage with Cold Temp for operation in 1 to 32 Degrees Fahrenheit. Cold Temp, high flex multi conductor cable. (Below 0 degrees Fahrenheit requires RFQ)

$2,995

C30 30" Insta-Thread 260% Carriage $695C31 30" Insta-Thread 260% Carriage with Insta-Cut Cuts the Film Web at the End of the Wrap

Cycle, Eliminating the Need for Operator Involvement (Not available in Canada) $1,490

C32 30" Insta-Thread 150% Carriage with Heavy Film upgrade for consistently running films above 110 Gauge. Upgrades to 1HP Motor & VFD. $1,490

C33 30" Insta-Thread 260% Carriage with Manual Roping for added load unitization and/or breathe- ability. Adjustable Roping down to Minimum 1" Web $1,190

C34 30’’ Insta-Thread 150% Carriage with Insta-Cut & Heavy Film $2,285C35 30" Insta-Thread 260% Carriage with Film Split- N-Rope $3,445C36 30’’ Insta-Thread 260% Carriage with Powered Roping for added load unitization and/or

breathability. Adjustable down to 1’’ rope from the top down, bottom up, or to the center (specified at time or order). Includes Control Panel Operator Activation of the roping deice (requires 80 PSI, 3 CFM air) Custom Programming and/or multiple preset roping programs available: Factory Quote.

$5,690

C37 30" Insta-Thread 150% Carriage with Cold Temp for operation in 1 to 32 Degrees Fahrenheit. Cold Temp, high flex multi conductor cable. (Below 0 degrees Fahrenheit requires RFQ)

$3,690

C99 Custom Carriage RFQPhoto DetectionP10 Special Load Height Photocell for Dark/Opaque Loads (Test load recommended) $495P99 Custom Photo Detection RFQFencingF09 2 Sided Safety Fence without detection $2,100F10 2 Sided Safety Fence, 88” tall (2 sides 140” Long) Wire Mesh Fencing on Two Sides of the

Wrap Zone with Reflex Photocells installed to Protect Wrap Zone during Wrap Cycle $2,300

F11 3 Sided Safety Fence with photocell U-shaped fence, 88” tall. (2 sides 140” Long, 1 end 156”) $3,495

F12 3 Sided Safety Fence with Light Curtain U-shaped fence, 88” tall. (2 sides 140” Long, 1 end 156”) $5,575

F99 Custom Fence RFQAlarm Package710 Audible/Visual Alarms for Cycle Start/Run. Audible alarm seconds before cycle start plus

visual beacon during cycle. $595

719 Custom Alarm RFQMiscellaneousFS Forklift Wheel Stop $3302000 Spare Parts Kit $9902010 Dark Load Photo Eye Spare Parts Kit $1,2199999 Custom Machine Spare Parts Kit RFQ

Made with Pride in the USA

Flex RTD Page 8

PARTS INCLUDED IN RTD-MODEL SPARE PARTS KIT Belt Prox Photoeye VFD Fuses Slide Button Cables Carriage Door Safety Switch

DELIVERY, TERMS AND SHIPPING Lead Time is typically 6-8 weeks from order. Some Options may increase Lead Time. Terms are balance net 30. If order is over $30,000 terms are 40% down/40% prior/balance net 30. Estimated Shipping Weight for Base Machine: 2,500 lbs. F.O.B. Alexandria, Minnesota, USA Transport Cost is NOT included Special handling or packaging is not included Start-Up and Training is offered by authorized Orion Distributor

WARRANTY 4 years on all Major Components 5 years on Structural Frame Lifetime on InstaThread™ Stretch Rollers

Made with Pride in the USA

Flex RTD Page 9

FLEX SERIES WARRANTY EFFECTIVE JANUARY 1, 2013 Rev 11/18/2013

For all products in the Flex Series, Orion provides an industry leading warranty from the delivery date of its products to be free from defects in materials and workmanship as described below. This warranty assumes that normal service will be performed by the user.

Flex Rotary Tower and CTS Machines including RTD, RTA and CTS are warranted for Four (4) Years from the date of shipment on all standard components, both electrical and mechanical, to be free from defects in material and workmanship. Structural components manufactured by Orion are warranted to be free from defects in material and workmanship for a period of Five (5) years. During the warranty period Orion will, at its option, either repair or replace any failed component.

Components not manufactured by Orion specified by the customer and that are other than Orion Packaging Systems standard brand are warranted by Orion to the extent that they are warranted by Orion’s supplier of these items.

The polyurethane pre-stretch rollers on the FLEX LPS/LPD/LPA/HPS/HPD/HPA/RTD/RTA/CTS models carry a Lifetime Warranty and are guaranteed to be free from defects in material and workmanship, and to perform to Orion standards in Orion film delivery systems which have been properly maintained. Rollers are not warranted against physical damage, corrosion, abuse, or negligence. The lifetime warranty does not apply to the rollers used on LPE model and these are covered under the Five (5) Year portion of this warranty instead. Wear parts such as e.g. belts, fuses, light bulbs, circuit breakers, brakes, motor brushes, slip ring brushes, etc. are excluded from this warranty.

DAMAGE IN TRANSPORT

Damage in transport is the responsibility of the carrier and is not covered under our warranty.

FREIGHT CHARGES

There will be no freight charges for warranty parts that are ordered for shipment via UPS regular ground service from Orion. Any other method of shipment, (UPS red/blue, Federal Express, common carrier, etc.) will be at the expense of the customer/distributor.

PARTS RETURN POLICY

For most components valued at under $300 list price, Orion does not require that the defective component be returned. All defective components valued at $300 or more list price must be returned to Orion in Alexandria, MN. It is at Orion’s sole discretion as to whether any given component must be returned, regardless of its value, for the purpose of determination of warranty status and the nature of the defect. Furthermore, confirmation that the part does not need to be returned must be provided by Orion at the time of order placement.

IMPORTANT EXCLUSIONS

EXCEPT AS STATED HEREIN, ORION MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED AND IN NO EVENT SHALL BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. ORION MAKES NO WARRANTY AS TO FITNESS OF EQUIPMENT FOR PARTICULAR PURPOSE. ORION NEITHER ASSUMES NOR AUTHORIZES ANYONE ELSE TO ASSUME FOR IT, ANY OTHER OBLIGATION OR LIABILITY RELATING TO ITS EQUIPMENT. THIS WARRANTY DOES NOT APPLY TO DAMAGE TO EQUIPMENT WHICH, IN THE JUDGMENT OF ORION, HAS BEEN SUBJECT TO INCORRECT VOLTAGE SUPPLY, NORMAL WEAR AND TEAR, TO MISUSE, NEGLECT, OR HAS BEEN REPAIRED OR ALTERED BY UNAUTHORIZED PERSONNEL. DEFECTIVE PARTS MUST BE RETURNED TO ORION, FREIGHT PREPAID, WITHIN 14 DAYS OF SHIPMENT OF THE REPLACEMENT PART, EXCEPT FOR COMPONENTS VALUED AT UNDER $300 LIST PRICE UNDER THE CONDITIONS STATED ABOVE. DEFECTIVE PARTS MUST BE RETURNED IN THEIR ORIGINAL STATE ALONG WITH A FULLY COMPLETED ORION WARRANTY PARTS RETURN FORM. DEFECTIVE PARTS THAT HAVE BEEN DISASSEMBLED, DAMAGED DURING REMOVAL, OR OTHERWISE TAMPERED WITH, WILL NOT BE COVERED UNDER WARRANTY, UNLESS OTHERWISE STATED IN WRITING. ORION’S SOLE OBLIGATION UNDER THIS WARRANTY WILL BE TO PROVIDE REPAIRS TO COMPONENTS OR REPLACEMENT PARTS, F.O.B. ORION’S POINT OF SHIPMENT EXCEPT AS STATED ABOVE. ALL ASPECTS OF THE ABOVE STATED WARRANTY AND PROCEDURES RELATED TO ORDERING PARTS UNDER WARRANTY WILL BE UPHELD WITH NO EXCEPTIONS.

Made with Pride in the USA

Flex RTD Page 10

Made with Pride in the USA