11.9.1

TABLE OF CONTENTS

GENERAL AND DOWNSPOUT DETAILS......................................................................2WS0020PE – Panel Profiles.........................................................................2GA2041 – Insulated Wall Panel Erection Notes ...........................................3GA2001 – Side Lap ......................................................................................4GA2002 – Side Lap Section .........................................................................5GA2042 – Horizontal Joint............................................................................6GA2130 – Standard Downspout with “S”......................................................7GA2135 – Connector Box.............................................................................8GA2150 – Standard Downspout With Collector Box Assembly....................9GA2170 – Standard Downspout @ Eave Overhang ..................................10

BASE CONDITION DETAILS .......................................................................................11STANDARD FINISHED FLOOR DETAILS..........................................................11

GB2300 – Base Support Angle w/ Trim......................................................11GB2320 – Base Support Angle w/ Trim @ < 4’ Curb Wall .........................12

STANDARD ABOVE FINISHED FLOOR DETAILS.............................................13GB2321 – Base Support Angle w/ Trim AFF > 4’ .......................................13

STANDARD CONCRETE NOTCH DETAILS ......................................................14GB2330 – Base Trim at Notch....................................................................14

CORNER DETAILS.......................................................................................................15GC2021 – Outside Corner..........................................................................15GC2051 – Inside Corner.............................................................................16GC2081 – Inside Transition Corner at Masonry or Existing Building .........17

FRAMED OPENING DETAILS .....................................................................................18GD2020 – Jamb Trim – CF Jamb...............................................................18GD2021 – Jamb Trim – HR Jamb ..............................................................19GD2040 – Head Trim – CF Cee ................................................................20GD2041 – Head Trim HR Cee....................................................................21GD2070 – Sill Trim .....................................................................................22

LAST REVISIONDATE: 04/27/11BY: TBS CHK: AES

DETAIL NAME IF APPLICABLE11.9.2

GENERAL AND DOWNSPOUT DETAILS

WS0020PE – PANEL PROFILES

WS0020PE.DWG

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGA2041.DWG 11.9.3

GA2041 – INSULATED WALL PANEL ERECTION NOTES

LAST REVISIONDATE: 07/15/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGA2001.DWG 11.9.4

GA2001 – SIDE LAP

LAST REVISIONDATE: 01/25/17BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGA2002.DWG 11.9.5

GA2002 – SIDE LAP SECTION

LAST REVISIONDATE: 02/16/15 BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGA2042.DWG 11.9.6

GA2042 – HORIZONTAL JOINT

LAST REVISIONDATE: 12/04/17BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA2130.DWG 11.9.7

GA2130 – STANDARD DOWNSPOUT WITH “S”

LAST REVISIONDATE: 12/04/17 BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA2135.DWG 11.9.8

GA2135 – CONNECTOR BOX

LAST REVISIONDATE: 12/04/17 BY: KMC HK: AES

DETAIL NAME IF APPLICABLEGA2150.DWG 11.9.9

GA2150 – STANDARD DOWNSPOUT WITH COLLECTOR BOX ASSEMBLY

LAST REVISIONDATE: 12/04/17 BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA2170.DWG 11.9.10

GA2170 – STANDARD DOWNSPOUT @ EAVE OVERHANG

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB2300.DWG 11.9.11

BASE CONDITION DETAILSSTANDARD FINISHED FLOOR DETAILSGB2300 – BASE SUPPORT ANGLE W/ TRIM

Note: Base Angle standard. Base Channel available upon request.

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB2320.DWG 11.9.12

GB2320 – BASE SUPPORT ANGLE W/ TRIM @ < 4’ CURB WALL

Note: Base Angle standard. Base Channel available upon request.

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB2321.DWG 11.9.13

STANDARD ABOVE FINISHED FLOOR DETAILSGB2321 – BASE SUPPORT ANGLE W/ TRIM AFF > 4’

Note: Base Angle standard. Base Channel available upon request.

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB2330.DWG 11.9.14

STANDARD CONCRETE NOTCH DETAILSGB2330 – BASE TRIM AT NOTCH

Note: Base Angle standard. Base Channel available upon request.

LAST REVISIONDATE: 01/16/17BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGC2021.DWG 11.9.15

CORNER DETAILSGC2021 – OUTSIDE CORNER

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGC2051.DWG 11.9.16

GC2051 – INSIDE CORNER

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGC2081.DWG 11.9.17

GC2081 – INSIDE TRANSITION CORNER AT MASONRY OR EXISTING BUILDING

LAST REVISIONDATE: 05/27/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGD2020.DWG 11.9.18

FRAMED OPENING DETAILSGD2020 – JAMB TRIM – CF JAMB

LAST REVISIONDATE: 05/27/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGD2021.DWG 11.9.19

GD2021 – JAMB TRIM – HR JAMB

LAST REVISIONDATE: 10/04/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGD2040.DWG 11.9.20

GD2040 – HEAD TRIM – CF CEE

LAST REVISIONDATE: 10/04/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGD2041.DWG 11.9.21

GD2041 – HEAD TRIM HR CEE

LAST REVISIONDATE: 05/27/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGD2070.DWG 11.9.22

GD2070 – SILL TRIM