Upload
api-6701026
View
178
Download
2
Embed Size (px)
Citation preview
3000
1500
STOCK12.8sqm
STOCK12.8sqm
A218
A216
A216
CHANGINGROOMS
x953 sq m
A217
A217 A217A217 A217A217 A217
A211
A212
A212A212
A212 A212 A212
FRONT
SCALE 1:10
FRONTSCALE 1:10
FRONTSCALE 1:10
A216
A211
A211
A212
A212
A218
FRONTSCALE
1:10
FRONT
SCALE 1:10
FRONTSCALE 1:10
A216
A214
A211A211
A212
A217
A212 A212
KKD evening wear display
A212 A212 A212
A216
A211
A211
A216
A211
A211
A212
A211
A212
A214
A211
A211
HOSIERY 13%
LINGERIE 67%
SWIM & SLEEP 20%
A218
A218
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAXt 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER2nd FLOOR318 OXFORD STREETLONDON W1C 1HF
HOF LINGERIE
GA PLAN
A201
1:100 @ A3
REV
/
DESIGN REVIEW MEETING12.05.09/
STOCK12.8sqm
A216
A216
CHANGING ROOMSx953 sq m
A217
A217 A217A217 A217A217 A217
A211
A212
A212A212
A212 A212 A212
FRONT
SCALE 1:10
FRONTSCALE 1:10
FRONTSCALE 1:10
A216
A211
A211
A212
A212
FRONTSCALE
1:10
FRONTSCALE 1:10
FRONTSCALE 1:10
A216
A214
A211A211
A212
A217
A212 A212
KKD evening wear display
A212 A212 A212
A216
A211
A211
A216
A211
A211
A212
A211
A212
A214
A211
A211
HOSIERY 13%
LINGERIE 67%
SWIM & SLEEP 20%
A218
A218
A218
A218
STOCK12.8sqm
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAXt 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER2nd FLOOR318 OXFORD STREETLONDON W1C 1HF
HOF LINGERIE
RCP PLAN
A203
1:100 @ A3
REV
/
DESIGN REVIEW MEETING12.05.09/
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAXt 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER2nd FLOOR318 OXFORD STREETLONDON W1C 1HF
HOF LINGERIE
LINGERIE SCREEN DETAILS
A207.1AS SHOWN @ A1
REV
QS ISSUE06.05.09/
A
DESIGN REVIEW MEETING12.05.09A
brand
note: track & running gear TBC. contractor to consult with brinkworth on options for weight of screens & required function.
FRONT SCALE 1:10
concept sketches initial concept sketch over view sketch detail of lingerie screen
PLANSCALE 1:10
SECTION A-ASCALE 1:10
90 N
OM
.
A
A
65
1200
general notes
> all brass where specified should be satin finish with clear, satin lacquer sprayed over to prevent oxidisation.>all timber should be solid or veneer (as appropriate to use or as specified) to match Harewood sample provided by brinkworth. contractor to provide samples of finish for brinkworth approval.
track details TBC
10mmTHK optiwhite safety glass with 30mm clear bevel around edge & patternated frosted film applied to both sides within centre (area without bevel)
note
: hei
ght i
ndica
tive
only.
act
ual h
t to
be d
eter
min
ed fo
llowi
ng s
pecifi
catio
n of
trac
k he
ight
& s
houl
d be
cro
ss c
heck
ed w
ith h
t fro
m F
.F.L
. to
F.C.
L.26
00 N
OM
.
frame from solid timber 65 x 45mm profile with 3mm radius to all edges
double track within frame to allow hanging on both sides. proposed system = Visplay Xero 04 system.
side hanging rail cut to size. if possible, oval profile to be used for hanging rail.
removable 'saddle' style front facing bars with locating hole to position as shown,note: front facers should be able to be positioned anywhere along length of side hanging bar, but 3 standard positions should be identified for ease of alignment.
215 360 360 217
300
NOM
.
brand logo from vinyl on glass. logo must be within area shown in red dashed box. Note: left align logo with box.TBC
80
50
50
height adjustable side hanging rails slotted into track mounted in timber frame. system of track & rail TBC. HOF to advise of current system & if compatible, use matching system. if possible, use oval steel profile for side hanging rail.
removable front facers to slot saddle style over side hanging rail. system TBC.
track set flush within timber frame to allow height adjustable hanging rails. note: ensure track (or shadow gap to match) continues around full perimeter of frame as shown.
note: track details to be agreed between HOF, contractor, brinkworth & visplay.
3d render of proposed visplay track system = Xero 04
track shown is single track only. track to be doubled either side of frame to allow double hanging.
recommend floor track to help keep screens in position. note: screens may NOT be required to be moved & may just have appearance of movement.
pattern options
brand brand
safety glass with frosted film & clear bevel around perimeter
arm of side hanging rail
30 clear solid timber frame with inset visplay tracks either side and with channel for glass to fit. details tbc.
frosted film
indicative visplay track e.g. Xero system.
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAXt 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER2nd FLOOR318 OXFORD STREETLONDON W1C 1HF
HOF LINGERIE
LINGERIE SCREEN DETAILS
A207.2AS SHOWN @ A1
REV
QS ISSUE06.05.09/
A
DESIGN REVIEW MEETING12.05.09A
FRONT
PLAN
SECTION - TYPE 1
150
350
TBC
1156 350TBC
BOXED SHELVINGSCALE 1:10
SECTION - TYPE 2
350
TBC
30
SECTION A-A - SHELVING TYPES
SCALE 1:10
timber box to conceal metal framework timber finish to match harewood veneer sample
metal framework to be recessed into base of timber boxremovable timber dividers
routed out lip detail to front edge
300TBC
timber shelf to conceal metal framework timber finish to match harewood veneer sample
300
timber shelf to conceal metal framework timber finish to match harewood veneer sample
torso mounted on directional pin on demountable track and locks into place
demountable track fixed to timber shelf
1160
TIMBER SHELFSCALE 1:10
TORSO FIXTURESCALE 1:10
300
timber shelf to conceal metal framework timber finish to match harewood veneer sample
legs mounted on demountable track and locks into place
demountable track fixed to timber shelf
HOSIERY LEGS FIXTURE - SHELVED OPTION
SCALE 1:10
clear acrylic backing panel
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAX
t 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER
2nd FLOOR
318 OXFORD STREET
LONDON W1C 1HF
HOF LINGERIE
DECORATIVE SCREEN - option A
A208REV
A
QS ISSUE06.05.09/
DESIGN REVIEW MEETING12.05.09A
as shown @ A1
note: track & running gear TBC. contractor to consult with brinkworth on options for weight of screens & required function.
FRONT SCALE 1:10
concept sketches
initial concept sketch over view sketch detail of decorative screen
PLANSCALE 1:10
SECTION A-ASCALE 1:10
1st prototype
note: method of joining materials & junctions b/n brass & mild steel.
90
NO
M.
A
A
frame from solid timber 65 x 45mm profile with 3mm radius to all edges
65
700
general notes
> all brass where specified should be satin finish with clear, satin lacquer sprayed over to prevent oxidisation.>all timber should be solid or veneer (as appropriate to use or as specified) to match Harewood sample provided by brinkworth. contractor to provide samples of finish for brinkworth approval.
26
00
NO
M.
no
te:
heig
ht
indic
ative
only
. actu
al ht to
be
dete
rmin
ed
follo
win
g s
pecifi
cation
of
track h
eig
ht
& s
hould
be
cro
ss c
hecked
with
ht
from
F.F
.L. to
F.C
.L.
frame from solid timber 65 x 45mm profile with 3mm radius to all edges
screen 'mesh' from folded flatbar 15mm x 3mm THK NOM. finish: flocked grey (brinkworth to provide RAL colour to match). pattern gets 'compressed' towards edges. brinkworth to provide 1:1 CAD drawing for formed profile.
35mm x 1mm satin satin stainless steel flatbar inset flush into interior perimeter of timber frame
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
NB: confirmation of
prefered infill screen
option a or b tbc at
client sign off meeting
2nd prototype
700
refer to photo ofprototype forfixing details.
45
solid 45mm x65mm timber
stained to matchsample
35mm x 1mmmirror polished s/s
set flush withininner face of frame
(showndot-dashed
behind)
15mm x2.5mmTHK satin
brass flatbarfolded to formcurved shape.
65
45
mitre corners offrame
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAX
t 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER
2nd FLOOR
318 OXFORD STREET
LONDON W1C 1HF
HOF LINGERIE
DECORATIVE SCREEN - option b
A208
as shown @ A1
REV
A
QS ISSUE06.05.09/
DESIGN REVIEW MEETING12.05.09A
note: track & running gear TBC. contractor to consult with brinkworth on options for weight of screens & required function.
FRONT SCALE 1:10
PLANSCALE 1:10
SECTION A-ASCALE 1:10
90
NO
M.
A
A
frame from solid timber 65 x 45mm profile with 3mm radius to all edges
65
700
26
00
NO
M.
no
te:
heig
ht
indic
ative
only
. actu
al ht to
be
dete
rmin
ed
follo
win
g s
pecifi
cation
of
track h
eig
ht
& s
hould
be
cro
ss c
hecked
with
ht
from
F.F
.L. to
F.C
.L.
frame from solid timber 65 x 45mm profile with 3mm radius to all edges
screen 'mesh' from expanded metal. finish: flocked grey (brinkworth to provide RAL colour to match). pattern gets 'compressed' towards edges. brinkworth to provide 1:1 CAD drawing for formed profile.
35mm x 1mm satin brass flatbar inset flush into interior perimeter of timber frame
photos showing 1st prototype.
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
optional bespoke pendant lights at intervals as indicated on plan.to be hung from track. allow for power.detail tbc
general notes
> all brass where specified should be satin finish with clear, satin lacquer sprayed over to prevent oxidisation.>all timber should be solid or veneer (as appropriate to use or as specified) to match Harewood sample provided by brinkworth. contractor to provide samples of finish for brinkworth approval.
NB: confirmation of
prefered infill screen
option a or b tbc at
client sign off meeting
photos showing 2ndprototype profile has been amended to make pattern narrower.
700
20
00
refer to photo ofprototype forfixing details.
solid 45mm x65mm timber
stained to matchsample
35mm x 1mm satinbrass flat bar setflush within inner
face of frame(shown
dot-dashedbehind)
expanded metalmesh infill flockedto match approved
sample
65
45
DRAWN BY
JOB NAME
CHECKED BY
brinkworth6 ellsworth street london E2 OAXt 44(0)20 7613 5341 f 44(0)20 7739 8425 .SITE ADDRESS
DRAWINGNAME
STATUS
DATE SCALE
JOB Nº DRAWING Nº
NOTES.•DO NOT SCALE DRAWING. CONTRACTOR TO CHECK ALL DIMENSIONS FROM DRAWINGS TO SITE AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES PRIOR TO FABRICATION TO ALLOW FOR MODIFICATIONS. DISCREPANCIES NOT BROUGHT TO THE ATTENTION OF THE ARCHITECT WILL BE THE RESPONSIBILITY OF THE RELEVANT CONTRACTOR.•THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL SPECIFICATIONS AND ALL RELEVANT DESIGN, ENGINEERS AND SPECIALIST DRAWINGS.•THE CONTRACTOR MUST ADVISE ON ALL DETAILS TO ENSURE STABILITY AND STRENGTH OF CONSTRUCTION ALL MATERIALS TO BE MATCHED AND BALANCED AS APPROPRIATE.•THE WORKS DESCRIBED AND SPECIFIED ON THIS DRAWING AND ASSOCIATED DRAWINGS SHALL BE UNDERTAKEN IN ACCORDANCE WITH CURRENT HEALTH AND SAFETY PLAN PREPARED BY THE PLANNING SUPERVISOR FOR THE PROJECT.
DESCRIPTIONDATEISSUE
CAD FILE Nº
EMD ....
BRWTH1/1...../DWG/..........
APRIL 09
APPROVAL
1961
HOUSE OF FRASER2nd FLOOR318 OXFORD STREETLONDON W1C 1HF
HOF LINGERIE
TALL SCREEN
A211 REV
A
QS ISSUE06.05.09/
DESIGN REVIEW MEETING12.05.09A
as shown @ A1
SIDESCALE 1:10
FRONT (FLATTENED VIEW)SCALE 1:10
concept sketches
front view rear view
note: display front facer not shown & brand plate shape has been modified since sketch
note: removable low ht rail not shown
FOOT DETAILSCALE 1:2
SIGNAGE DETAILSCALE 1:2
FRONT FACER DETAILSCALE 1:2
plan section
side view
mitre timber frame at corners
35 x 50mm solid timber with silvered finish. see section detail
smoked grey safety glass with etched pattern & bevelled edges. see XXX for pattern.
5mm shadow gap
base from mild steel flatbar with metallic spray finish. ref XXX
hanging rail from 15 x 20mm s/steel rhs or 1/2" x 11/4" oval s/steel section fixed into timber frame
10
brass signage plate. see detail
250
finger join timber at top.
PLANSCALE 1:10
1485
1500
600
479
479
satin s/s 'pucs' for removable screen in front facers
35
3550
removable hanging bar to match
general note: concealed tapped rubber feet to underside of all contact surfaces for small ht adjustments.
BASE DETAILSCALE 1:2
3D sketch model - not to scaleelevation
brand
details of fixingof removable
hanging bar TBC
brinkworth to provide detail
general note: brass signage to be uniform dimensions for mid floor units to allow for flexibility. client to confirm preferred overall width
oval hanging rail behind glass screen
brand 3mm RAD. to all edges of timber frame
17mm DIA. satin s/s CHS
turned timber endcap with silvered grey finish (to match harewood veneer)
45
28
threaded screw welded to CHS.
10mm THK smoked grey safety glass
53
70
foot from 3mm steel welded to upright & finished to match. ensure all welds are neat.
rubber foot to underside.
s/s 'puc' with threaded insert for screw
56
25mm RAD.
concealed tapped rubber foot to allow minor height adjustments
base from folded & welded steel flatplate with metallic omnicoat finish Ref: XXX
5mm shadow gap b/n base & timber frame
base to be enclosed fully as shown above
brand90
3520
35
5mm RAD. 5mm RAD.
signage plate from 2mm magnetic backed brass sheet
changeable logo from cut vinyl
30
20mm chamfer to glass. chamfered area left clear of frosted film
2535
folded brass fixing channel