STOCK 2019 - Faulkner Haynes...May 17, 2019 · Faulkner Haynes, Inc. is a sales driven company, however service is our final product. Faulkner Haynes is a manufacturer’s representative

The Carolinas’ Premier Commercial

HVAC & Power Quality Reps

2019STOCK

(Rev. date May 17, 2019)

Faulkner / Haynes & Associates, Inc.2 Faulkner Haynes, Inc.

ABOUT FAULKNER HAYNES

Mission Statement

The mission of Faulkner Haynes, Inc. is to be the premier provider of commercial HVAC and power

quality products in the Carolinas.

Faulkner Haynes, Inc. is a sales driven company, however service is our final product.

Faulkner Haynes is a manufacturer’s representative serving the commercial and industrial heating, ventilation and air conditioning (HVAC) markets of the Carolinas. With a combination of high quality manufacturers and exceptional technical salespeople we strive to provide Engineers, Contractors and Owners/End users: • Unmatched product expertise • Technical design assistance • Reliable budget estimates • Accurate quotations • Dependable submittals • Professional project management • Unparalleled technical support and start-up assistance • Fully Stocked HVAC warehouse

CHARLOTTE, NC2221 Park Road, Suite 200Charlotte, NC 28203-6100(P) 704.343.9577 (F) 704.343.9592

GREENSBORO, NC1500 Pinecroft Rd, Suite 121Greensboro, NC 27407(P) 336.299.3006 (F) 336.299.3417

WILMINGTON, NC5101 Dunlea Court, Suite 204-AWilmington, NC 28405(P) 910.251.9155 (F) 910.251.9176

COLUMBIA, SC122 Arrowwood RdColumbia, SC 29210(P) 803.926.9229 (F) 803.926.3639

GREENVILLE, SC100 Whitsett StreetGreenville, SC 29601(P) 864.329.0372 (F) 864.329.0376

CHARLESTON, SC4365 Dorchester Road, Suite 107Charleston, SC 29405-8422(P) 843.884.3554 (F) 843.884.3094

FAULKNER HAYNES, INC. HEADQUARTERS3400 Yonkers Road, Suite 110, Raleigh NC 27604

(P) 919.781.8840 (F) 919.787.8765

www.FaulknerHaynes.com 3www.FaulknerHaynes.com

TABLE OF CONTENTS

Air Distribution Cross-Reference Sheet....................................................................................................................4Tips, Tips, and More Tips..................................................................................................................................................5-7Air Distribution

Perforated Ceiling Supply Diffusers..............................................................................................................10Perforated Ceiling Return Diffusers...............................................................................................................11Louvered Faced Ceiling Diffusers...................................................................................................................12Square Cone Diffusers............................................................................................................................................13Square Plaque Diffusers........................................................................................................................................14Supply Registers..........................................................................................................................................................15Return Grilles & Registers.....................................................................................................................................16Filter Grilles......................................................................................................................................................................17Egg-Crate Returns.....................................................................................................................................................18Plenum Slot Diffusers..............................................................................................................................................19Modulinear Supply Slot Diffusers and Plenums..................................................................................20Round Cone Supply Diffusers...........................................................................................................................21Spiral Registers.............................................................................................................................................................22Ceiling Diffuser & Return Accessories.................................................................................................23-25Single Duct Terminal Units..................................................................................................................................26Thermal Variable Air Volume Diffusers.......................................................................................................27

FansCentrifugal Roof Exhauster..................................................................................................................................29Cabinet Fans...........................................................................................................................................................30-33Vibration Isolation Kits.............................................................................................................................................34Gravity Ventilators......................................................................................................................................................35Roof / Wall Caps.........................................................................................................................................................36Curbs & Rails..................................................................................................................................................................37

Fan Accessories.........................................................................................................................................................................38Dampers

CAD / DM / Access Door....................................................................................................................................40Radiation Dampers....................................................................................................................................................41Fire Dampers.................................................................................................................................................................42Motorized Dampers (Spring Return).............................................................................................................45Round Barometric Relief Dampers................................................................................................................45Round Manual Dampers (Bowden Cable Controls)..........................................................................46Oval Cable Controlled Dampers......................................................................................................................47Round CO2 Indoor Quality Dampers..............................................................................................................48

LouversExtruded Aluminum Louver.................................................................................................................................43

Mini-SplitsWall-Mounted Mini-Splits...........................................................................................................................50-52 Ceiling Cassette Mini-Splits...............................................................................................................................53Ducted Mini-Splits.....................................................................................................................................................54 Multi-Zone Mini-Splits............................................................................................................................................55Mini-Split Controls......................................................................................................................................................56 Mini-Split and VRF Accessories...............................................................................................................57-60

Vibration Isolation and Seismic Restraints.................................................................................................62-63 Variable Frequency Drives.................................................................................................................................................65Ductwork & Accessories.....................................................................................................................................................66Gas Fire Heaters................................................................................................................................................................68-69Line Card..........................................................................................................................................................................................72


TITUS NAILOR METAL-AIRE PRICE TUTTLE & BAILEY CARNES

300RS 61DV V4004 520S T64 RSDBV

350RL 6145H RH 530L T70D RSABH

PCS 4320CB 7000 PDC PV SPFB

T700L-AF 61DGD DGDF STG/BF A980WF RGCAD

PAS 4320L 7500 PDF PP SPAB

PAR 4360 7600R PDDR PR SPRB

PXP 4302 SPRTB PFRF PTL SPHB

TMS RNS 5700 SCD 1200/1300 SFTB

TDC 6500 5500 SMD MSR SKTA

OMNI UNI 5850 SPD T-1100 SFPA

50F 61EC CC1 80 CRE RAEAC

TRM DFA TBPF PFS SMF KXFAA

350RLF 61FBL45 SRAF 530FF T70DFB RSABD

50FF 61FEL CC1S-FB-6 80FF CB8500FB RAPAF

8RF 61FPL RP-FB 10FLB PGFB RSFA

TBDI 5710I PDI10 TBD410 SVPSI-075 DARB-B-R

ML 5000 6600 SDS 6X (1,2,5) CH

TBD-FR 5575 N/A TBD2 N/A 5575WB

7600-FRS 4113 SPRTBFRS 10FR N/A N/A

PESV P3001 500/400TH SPV SDVP AVCC-CX

DESV D3001 500/400TH SDV SDVD AVCC-CX

PEDV W/ATT P3230 400DD DPS DDVP ADCD-CF

DTQP 35NE 400FVI FDV FPV ASEG

DTQS 35SE 400FCI FDC FPC ACFG

ML38 5075 6575 SDS75 62 CHCB

ML39 5010 6510 SDS100 72 CHFB

MPI38 5375 I 6075BPI SDAI75 DPI62 CXPA6-1

MPI39 5310 I 6100BPI SDAI10 DPT72 CXPA8-1

AG-75 4275 D3 VCR RON KXMB

TMR RNR 3100 RCDE P3 SSEA

AIR DISTRIBUTION CROSS-REFERENCE


TIPS, TIPS, AND MORE TIPS

• Air Change Rate per Hour: Total Volume x ACH/60 = CFM

• Air Change Frequency in Minutes: Total Volume/AC Frequency in Minutes = CFM

• Heating Load = 24 BTUH/sq. ft. Insulated Building

• Heating Load = 40 BTUH/sq. ft. Non-Insulated Building

• Combustion Air: 4 CFM OA/1,000 BTUH input

• Gas Pressure: 1 PSI = 28‖ WC (water column) = 2.04” Hg (Mercury)

Electricity

• Watts = Volts x Amps

• 1 HP (motor) = .746 KW (operating energy)

• 5 HP x .746 KW/HP x 3413 BTUH/KW = 12,700 BTUH = 1 Ton of Cooling

• KW (3 phase) = Volts x Amps x 1.732 x Power Factor/1000

• KW (1 phase) = Volts x Amps x Power Factor/10000

• Efficiency = 746 x Output Horsepower (HP)/Input Watts

• HP (3 phase) = Volts x Amps x 1.732 x Eff. x Power Factor/746

• HP (1 phase) = Volts x Amps x Eff. X Power Factor/746

Swimming Pool Design

• Must determine evaporation rate: What water temp & air temp? – Norm: 80° pool water temp & 82° air temperature

• 4 - 6 air changes per hour for pools + 2 additional air changes for pools with spectator facilities

• 0.5 CFM of outside air (OA)/sq. ft. pool and deck area or 15 CFM/person of OA, whichever is greater

• Contact factory rep when OA requirements greater than 15% of unit CFM

• Must have means of heat rejection for summertime usage, i.e. air cooled condenser

• Maintain pool at .05 to .15 negative pressure with exhaust fan and try to place exhaust grille directly over whirlpool

• Supply air should be blown across full width of all windows

• Do not direct supply air over pool surface

• Return air grille 10-15 feet above pool floor level as far away from any whirlpools as possible

• Need separate plastic, inline pump for pool water to be circulated through dehumidifier for pool heating

• *Vapor barrier on warm (inside) portion of outside wall and ceiling

• Pool water must be maintained at pH level between 7.2 and 7.6

• Do not store pool chemicals in mechanical room

• Skylights not recommended

• Need 2 - 3 CFM/sq. ft. for glass to minimize glass condensation

CAMBRIDGE ENGINEERING

DANFOSS

Fuel Comparisons

• Natural Gas - 1,000,000 BTUH = 10 Therms or 1000 Cubic Ft.

• Propane Gas - 1,000,000 BTUH = 46 Lb. or 10.88 Gallons

• No 2 Fuel Oil - 1,000,000 BTUH = 7.14 Gallons

• Electricity - 1,000,000 BTUH = 293 KW

DESERT AIRE

EBTRON

• Best Installed Accuracy

• Low Airflow Capability

• Volumetric or Mass Airflow Measurement

• Long-term Stability

• “Plug and Play” Operation

• Intuitive User Interface

• Waterproof Sensor Assembly

• FEP Plenum Rated Cables



NEPTRONICS

Humidification

• 1 lb water = 7000 grains

• Self Generating Steam Electrode type

• In-duct or Space Atomizing type

• 12,000 BTUH = 1 ton of cooling

• 1 MBH = 1000 BTUH

• Sensible Heat: Measured in dry bulb temperatures

• Sensible Cooling/Heating (BTUH) = CFM x 1.08 x Temp Difference

• Latent Heat: Measure in wet bulb temperatures and related to change in humidity ratio

• Total Cooling (BTUH) = CFM x 4.5 x Enthalpy Difference

LIEBERT PRIHODA

• Cooling (BTUH) = GPM x 500 x Temperature Difference

• Pump BHP = GPM x FT x Specific Gravity/3960 x Pump Efficiency

• Pump BHP = GPM x PSI x Specific Gravity/1713 x Pump Efficiency

• Head in Feet = 2.31 PSIG

MASON INDUSTRIES

Seismic Guidelines

• Seismic restraints are required for the following items when suspended by individual hangers greater than 12” in length from supporting structure

• Ductwork: Ducts greater than 6 sq. ft. rectangular or 28” round to be braced 30’ transverse and 60’ longitudinal

• Piping: Gas or fuel pipe 1” diameter and larger to be braced 20’ transverse and 40’ longitudinal

• In boiler and mechanical rooms with piping 1¼” ID and larger and in other areas with piping 2½” ID or greater to be braced 40’ transverse and 80’ longitudinal

• Installation Time: Approx. 30 min to 1 hour per location ( 2 minutes per foot of pipe or duct)

TITUS

• Secondary air movement is room air entrained by supply air

• 700 FPM outlet velocity required for heating out of ceiling diffuser

Air Distribution

• 1.0 - 1.5 CFM of supply air/sq. ft. of foor area for comfort cooling

• Vertical Throw is the maximum distances below the ceiling of the air pattern at terminal velocities of 100, 75, and 50 FPM

• Drop is downward supply of air movement at a specific throw

• Spread is the maximum width of air pattern at terminal velocities of 100, 75 and 50 FPM

• Secondary air movement is room air entrained by supply air

• 700 FPM outlet velocity required for heating out of ceiling diffuser

Heat Load

• Transmission heat gains: BTUH =”U” factor x sq. ft. x Temperature Difference

• Solar heat gains: BTUH = Solar Heat Gain Factor x sq. ft. of glass

• People Load (Sensible): BTUH = Solar Heat Gain Factor x 250 BTUH/person

• People Load (Latent): BTUH = Solar Heat Gain Factor x 350 BTUH/person

• Lighting Load: BTUH = 3 watts/sq. ft. x floor areas (sq. ft.) x 3.413

• 15,000 BTUH = 1 ton of heat rejection for cooling tower

• 3.0 GPM/ton for condenser water

• Condenser water temperature range: 85 EWT to 95 LWT

POTTORFF

Fire Dampers & Louvers

• Type A: Return air and transfer air

• Type B: Low pressure supply air

• Type C: High pressure supply air

• All fire dampers are required to have sleeves per NFPA

• Static Fire Dampers were tested without air movement in the ductwork

• Dynamic Fire Dampers were tested with air movement. They should be used

• Louver Free Area Velocity = CFM/free area

• Normal louver sizing based on 700 FPM through free area of louver

RAYWALL

Electric Heat

• 1KW = 1000 watts

• 1KW = 3413 BTUH



VULCAIN

Refrigerant Monitors

• ASHRAE Standard 15-1994 states that a refrigerant monitor must be installed in a refrigerating machinery room

• Sampling point should be 18” above finished floor

• Sampling point should be positioned between refrigerant system and a room exhaust

• Multiple refrigerants can be detected by a singe controller with refrigerant specific sensors

YOUNG REGULATOR

Bowden Cable Control System should be used

• Above Sheetrock ceilings

• Above HEPA filter ceilings

• Above special architectural ceilings

• Above secured prison cells

• In underground ductwork

• In high atriums

VIBRO-ACOUSTICS

• Centrifugal fan noise maximizes in 3rd octave band (250 hz)

• Sound power (generation from the fan) and sound pressure (received by the ear) are measured in dB(decibels)

– Ten (10) times logarithm of the ration of a given power to a reference power

– In sound the current reference power is 10^-12 watts

• NC (Noise Criteria) curves based on different dB levels at different octave bands

• With two (2) sound sources of equal dBs, the equiva-lent dB is the original + 3 dB

– i.e. 60 dB + 60 dB = 63 dB

• With two sound sources of unequal dBs, if the differ-ence is 10dB or more, use higher dB

– i.e. 60 dB + 60 dB = 63 dB

• With two sound sources of unequal dBs, if the differ-ence is 10dB or more, use higher dB

– i.e. 70 dB + 60 dB = 70 dB

• Sones: a single number method to predict loudness levels, usually for small fans

TWIN CITY FANS

Fan Laws

• Law #1: CFM varies Directly with RPM

• Law #2: Static Pressure varies with the Square of the RPM

• Law #2: Static Pressure varies with the Square of the RPM

Fan Classes

• Class 1 Fans: up to 4.5” pressure

• Class 2 Fans: up to 7” - 8”: pressure, heavier gauges & larger shafts than Class 1

• Class 3 Fans: above 7” - 8” pressure, still heavier gauges & larger shafts than Class 2

Roof Curbs

• Top of curb 8” above roof, common to use 12” high roof curb

• Three types: Straight sided, canted and raised cant.

• Outside dimension (OD) of curb should be 2” - 3” less than Inside dimension (ID) of equipment sitting on

• Curb to allow for flashing material to be brought over top

• Wood nailer used as means of securing equipment to the curb

Kitchen Exhaust

• Make-up fan inlet shall be at least 10’ away from exhaust fan outlet

• Kitchen exhaust duct: welded 16 gauge and shall have velocity over 1500 FPM

• Kitchen exhaust hoods: Wall mount: 100 FPM through canopy

• Island mount: 150 FPM through canopy

• 6” overhang on all sides beyond cooking battery

• Kitchen exhaust fans shall be upblast and outlet shall be at least 40” above roof

TITUS CONTINUED

• Cooling tower water range: 95 EWT to 85 LWT

• 2.4 GPM/ton for chiller evaporator

• Chiller temperature range: 55 EWT to 45 LWT

• Chilled water coils temperature range: 45 EWT to 55 LWT


TERMS AND CONDITIONS

Prices: Prices are FOB shipping point. Shipments via air or other specific methods will be subject to additional freight charges. Prices are subject to change without notice.

Terms of Payment: All orders are either COD or bank approved checks unless prior credit has been approved. Credit terms are net (30) days from date of invoice unless otherwise indicated. A service charge of 1½ percent per month will be assessed each month after the initial 30 day period has expired until payment is received. In the event of non-payment, the buyer agrees to bear the expense of all legal proceedings plus any reasonable attorney fees.

Venue: The contract shall be governed by and construed in accordance with the laws of the state of North Carolina.

Taxes: Taxes are not included in the sales price. Any taxes, if applicable and imposed by any present or future local, state or federal agency must be paid by the Buyer.

Warranty: No express or implied warranties as to the goods sold extends to the buyer other than the manufacturer’s warranty.

Claims: The responsibility of the ceases upon delivery of material in good order to the carrier. As all goods are shipped at buyer’s risk, any claims for damage or shortage or loss in transit must be filled by the buyer against the transportation company. (We will assist the buyer in any reasonable way possible in the filing and collection for any claim for damages and/or losses while in transit.) Claims against shortage will not be considered unless made within 60 days after receipt of goods.

Return Of Goods: Goods may not be returned except by permission of a representative of Faulkner Haynes, Inc., and when so returned, shall be subject to a restocking fee. No goods may be returned after 90 days.

www.FaulknerHaynes.comwww.FaulknerHaynes.com 9www.FaulknerHaynes.com

www.FaulknerHaynes.com10

STOCK ITEM: Next Day Availability(Must be ordered by 2pm Eastern Time)

• The PAR series diffusers are return diffusers that match the PCS series

• Can be adjusted before or after installation

• 51% free area perforated face

• The PCS perforated ceiling diffuser, Supply, has curved blade deflectors mounted in the neck

Product Details

• Discharge pattern can be adjusted from horizontal to vertical

MODEL PCS

Neck Dia Mounting Face Size Max CFM¹ Steel Price Each

Aluminum Price Each Damper Insulated

backpan

6”

Lay-In

12’” x 12 “235 $34 N/A $9

$14

8” 235 $34 $42 $10

6”

24” x 24”

235 $34 $42 $9

8” 397 $34 $42 $10

10” 567 $34 $42 $9

12” 754 $34 $42 $11

14” 941 $34 $42 $17

16” 1171 $40 $48 N/A

Note: 1 - CFM based on NC ≤ 35

Border Type 3 (Lay-In)

24 x 24” Backpan(Shaded Sizes in Table)

NominalDuct Size D

D minus 1/8”

Ceiling Module Minus 1/4”

Ceiling Module Size

Non-24 x 24”Backpan

PERFORATED CEILING DIFFUSERS, SUPPLYMODEL PCS

www.FaulknerHaynes.com 11


• The PAR perforated return ceiling diffusers are round neck grilles also available with square necks

• Provides tight, uniform, horizontal blanket of air that protects the ceiling against smudging

• 51% free area perforated face

Product Details

MODEL PAR

Neck Size Mounting Face Size Max CFM¹ Steel Price Each

Aluminum Price Each Damper

6” dia

Lay-in

12” x 12” 195 $30 N/A $9

6” dia

24” x 24”

195 $30 $37 $9

8”dia 350 $30 $37 $10

10” dia 545 $30 $37 $10

12” dia 785 $30 $37 $11

14” dia 1070 $30 $37 $17

16” dia 1395 $40 $46 N/A

10” x 10” 12” x 12” 545 $25 $33 N/A

10” x 22” 12” x 24” 1528 $29 $42 N/A

22” x 22” 24” x 24” 3361 $30 $42 N/A

Note: 1 - CFM based on maximum neck velocity of 1000 fpm and Ps drop of 0.10 in Wg

PERFORATED CEILING DIFFUSERS, RETURNModel PAR

Border Type 3 (Lay-In when D=Module size -2)

Border Type 3 (Lay-In for other duct sizes shown)

Nominal Duct Size D

NominalDuct Size D

D minus 1/8”

Ceiling Module minus 1/4”Ceiling Module Size

D minus 1/8”

Ceiling Module Minus 1/4”

Ceiling Module Size



• 4-way blow pattern

• Steel and aluminum construction

• Removable core from face of diffuser

• Cone and louvered face, high capacity

Product Details

See page 22 for square-to-round neck adapters.

• Opposed blade dampers and square to round transitions available

MODEL TDC

Model Neck Size Mounting Face Size Max CFM¹ SteelPrice Each

AluminumPrice Each Damper

TDC-6

6” x 6”

Surface/ Beveled

Duct + 5”

175 $20 N/A $9

6” RD 156 $21 N/A $9

9” x 9” 394 $25 N/A $10

12” x 12” 660 $34 N/A $14

15” x 15” 969 $44 N/A $20

TDC-3

6” x 6”

Lay-In 24”x24”

175 $33 $40 $9

9” x 9” 394 $37 $47 $10

12” x 12” 660 $46 $56 $14

15” x 15” 969 $57 $71 $20


LOUVERED FACE DIFFUSERSModel TDC

STEEL AND ALUMINUM CONSTRUCTION

Border Type 3 (Lay-In)

Ceiling Module

Ceiling Module minus 1/4”

2 1/8”

Duct sizeplus 1”

* A plus 5”

2 1/8”

7/8”

Border Type 6 (Beveled Drop Face)



• Excellent for variable air volume system

• Steel and aluminum construction • Uniform 360 discharge pattern

Product Details

• 3 concentric cones in all sizes

• Screwdriver adjustment of optional damper

MODEL TMS

Neck Size Mounting Face Size Max CFM¹ SteelPrice Each

AluminumPrice Each Damper Insulated

backpan

6”

Lay-In

12” x 12”262 $24 $32 $9

$14

8” 325 $24 $32 $10

6”

24” x 24”

335 $38 $64 $9

8” 532 $38 $56 $10

10” 765 $38 $56 $10

12” 993 $38 $56 $11

14” 1285 $38 $56 $17

15” 1350 $40 $56 $20


SQUARE CONE DIFFUSERSModel TMSSTEEL AND ALUMNUM CONSTRUCTION

TMS • Round Neck

Square Ceiling DiffusersSteel • High Performance

D-TMS-1.0 1-4-12

Border Type 3 (Lay-In) Full Face. For other border types, please see next page.

Border Type 3 (Lay-In) Panel Mount. For other border types, please see next page.

Ceiling Module A minus 1/4"

B minus 1/8"

Nominal Round Duct Size B

Ceiling Module A

E

D

C

Ceiling Module A


Nominal Face Sizes F C D E

24 x 24 4, 5* 12 X 12 2 3/4 5 1 1/824 x 24 6, 7 12 X 12 3/4 3 1 1/824 x 24 8 12 x 12 3/4 3 1 1/8

Ceiling Module A

Ceiling Module A minus 1/4"

B minus 1/8"

Duct Size BNominal Round

F

E

C

D

Ceiling Module A

Nominal Round Duct Size B C D E

12 x 12 4, 5* 3 1/8 5 3/8 1 1/812 x 12 6, 7 1 1/8 3 3/8 1 1/812 x 12 8 1 1/4 3 1/2 1 1/820 x 20 4, 5* 2 3/4 6 3/8 1 1/420 x 20 6, 8, 10 3/4 4 3/8 1 1/424 x 24 6, 8 1 1/4 5 1 1/424 x 24 10, 12, 14, 15 1 3/8 5 1/8 1 1/4

* Adapter is provided for Sizes 4 & 5

* Adapter is provided for Sizes 4 & 5

Ceiling Module A

Ceiling Module A minus 1/4”

E

C

D


B minus 1/8”



• Removable core from diffuser

• Steel and aluminum construction

• Designed for architectural ceilings

• Uniform 360 horizontal air pattern

Product Details

• Provides excellent performance in VAV system

MODEL OMNI

Neck Size Mounting Face Size Max CFM¹ SteelPrice Each

AluminumPrice Each Damper Insulated

backpan

6”

Lay-In

12” x 12” 245 $26 $40 $8 N/A

6” 24” x 24” 280 $41 $59 $8 $14

8” 12” x 12” 450 $26 $40 $9 N/A

8” 24” x 24” 450 $41 $59 $9 $14

10” 12” x 12” 654 $26 $40 $9 N/A

10” 24” x 24” 654 $41 $59 $9 $14

12” 24” x 24” 865 $41 $59 $11 $14

14” 24” x 24” 1100 $41 $59 $16 $14

15” 24” x 24” 1250 $41 $59 $17 $14


SQUARE PLAQUE DIFFUSERSModel OMNI

STEEL AND ALUMINUM CONSTRUCTION

C

Ceiling Module A

Ceiling Module A minus 1/4”


B minus 1/8”

E

C

1/4”

D



Border Type 1 (Surface Mount)

Available Sizes (D” x D”)Border Type 1 is available in sizes 6” x 4” through 48” x 48” in 2” increments in one piece construction. Odd and fractional sizes are available at additional cost. Sizes larger than 48” x 48” are shipped in multiple sections with joining strips for field assembly.

Note: Wall or duct opening should be duct area + 1/8”. All dimensions are in inches.

D plus 1 3/4”

ScrewdriverSlot Operator For Optional Camper

1 1/4”1 1/4”

1 3/4”

3”

D minus 1/2”

Nominal Duct Size D”

9/16”3/4”

D minus 3/4”

• Front blades parallel to the short dimension • White finish

• Individually adjustable blades • Available in 3/4 inch blade spacing • Double deflection grilles

Product Details

• Opposed blade damper • Stocked in Steel (300RS) - all sizes, and Aluminum

(300FS) - limited sizes

SUPPLY REGISTERS300RS/300FS w/OBD

MODEL 300RS/300FS w/OBD

NeckMax CFM1 Steel

PriceAluminum

PriceNeck

Max CFM1 Steel Price

Aluminum Price

NeckMax CFM1 Steel

PriceAluminum

PriceW H W H W H

6” 6”220

$23 $21

16”

4” 420 $30 N/A20”

12” 1050 $50 $46

8”

4” $22 N/A 6” 460 $33 $31 14” 1145 $56 N/A

6” 267 $24 $22 8” 575 $36 $33

24”

6” 704 $43 N/A

8” 335 $27 $25 10” 700 $39 N/A 8” 900 $47 N/A

10”

4” 270 $24 $22 12” 800 $44 N/A 10” 1050 $53 $48

6” 305 $27 $25 14” 1000 $45 N/A 12” 1274 $57 $53

8” 370 $27 $25 16” 1150 $53 N/A 24” 2450 $104 N/A

10” 480 $30 $27

18”

4” 460 $33 N/A

30”

8” 1050 $61 N/A

12”

4” 340 $26 N/A 6” 510 $36 $33 10” 1300 $68 N/A

6” 370 $28 $25 8” 704 $40 N/A 12” 1550 $75 N/A

8” 460 $30 $27 10” 875 $44 $40 24” 2850 $119 N/A

10” 576 $32 $30 12” 1013 $47 N/A 30” 3564 $149 N/A

12” 704 $35 $32 14” 1120 $48 N/A

36”

8” 1274 $75 N/A

14”

6” 400 $31 $28 16” 1274 $53 N/A 10” 1603 $83 N/A

8” 490 $33 $31 18” 1449 $63 N/A 12” 1900 $83 N/A

10” 605 $36 N/A

20”

6” 576 $39 N/A 36” 5100 $230 N/A

12” 735 $39 N/A 8” 800 $42 N/A

14” 915 $43 N/A 10” 920 $46 N/A

Note: 1 - CFM based on NC 30



• Steel (350RL) or Aluminum (350FL) Construction

• Blades parallel to the long dimension

Product Details

• Sidewall and lay-in applications available

*Surface Mount Filter Return Grille - 1” Filters by others. **Lay-in Filter Return Grille - 1” Filter by others.***No screw holes; for Lay-In or Plaster Frame mounting.


FIXED BLADE RETURN GRILLESModel 350RL/350FL

Available Sizes (D” x D”)Border Type 1 is available in sizes 6” x 4” through 48” x 48” in 2” increments in one piece construction. Odd and fractional sizes are available at additional cost. Sizes larger than 48” x 48” are shipped in multiple sections with joining strips for field assembly.

Note: Wall or duct opening should be duct area + 1/8”. All dimensions are in inches.

MODEL 350RL/350FL

Neck Max CFM1 Steel Price Aluminum

PriceNeck Max

CFM1 Steel Price AluminumPrice

Neck Max CFM1

Steel Price

Aluminum PriceW H W H W H

6” 6” 100 $8 N/A 16” 12” 600 $19 N/A 24” 6” 550 $19 N/A

8” 4” 90 $9 $10 14” 850 $19 N/A 8” 775 $19 N/A

6” 133 $9 N/A 16” 900 $22 $21 10” 835 $20 N/A

8” 178 $12 $11 18” 12” 800 $19 N/A 12” 900 $22 N/A

10” 6” 240 $12 N/A 14” 800 $20 N/A 14” 1000 $24 N/A8” 280 $12 N/A 16” 900 $22 N/A 16” 1100 $29 N/A

10” 370 $14 N/A 18” 1000 $28 $26 18” 1250 $33 N/A***10” 370 $14 $13 20” 8” 800 $17 $16 20” 1500 $33 N/A

12” 6” 200 $12 N/A 10” 900 $19 N/A 22” 1700 $39 N/A8” 267 $14 N/A 12” 900 $20 N/A 24” 1600 $46 N/A

10” 330 $14 N/A 14” 900 $22 $24 30” 8” 900 $24 N/A12” 400 $15 $14 16” 1000 $26 $25 12” 1100 $29 N/A

14” 6” 280 $14 N/A 18” 1100 $27 N/A 16” 1600 $36 N/A8” 400 $14 N/A 20” 1500 $33 $31 18” 1900 $42 N/A

10” 500 $15 N/A *20” 1600 $61 $57 24” 2200 $59 N/A12” 700 $17 $15 ***20” 1600 $62 N/A 30” 2900 $67 N/A14” 750 $19 $18 22” 10” 600 $19 N/A 36” 18” 2100 $51 N/A

16” 8” 450 $15 N/A ***10” 600 $19 N/A 24” 3200 $71 N/A10” 550 $17 N/A 22” 1600 $39 $37 28” 3500 $88 N/A

***22” 1600 $39 $37 36” 4300 $112 N/A

Note: 1 - CF2M based on NC 30



*With Knurled Knobs

• 24” x 24” face size only - accepts 20” x 20” x 1” filter “FILTER BY OTHERS”

• 3/4 inch blade spacing

• 35” fixed deflection

Product Details


MODEL 350RLF1

Model Mount Neck Construction Price

350RLF1 Lay-in or Surf. Mount 20x20 Steel $61

350FLF1 Lay-in or Surf. Mount 20x20 Aluminum $57

350FLF1-KK* Lay-in or Surf. Mount 20x20 Aluminum $57

Model 350RLF1

FIXED BLADE RETURN GRILLE, FILTERED(FILTERS BY OTHERS)

D PLUS 3 3/4”

3/4”

FASTENER

7/16” 1 1/4”

HINGE

NOMINAL DUCT SIZE (D)

Duct opening should be nominal duct size (d) plus 1/4”.

D PLUS 1/4”

2 5/32” FOR 1” FILTER3 3/16” FOR 2” FILTER



• Surface mount and lay-in applications available

• MRI compatible

• 1/2” x 1/2” x 1/2” aluminum border & core

Product Details

• Egg-crate matches appearance of parabolic lighting fixtures

* Lay-In Eggcrate Filter Grille – 1”Filter provided by others


Model 50FEGG-CRATE RETURN GRILLES

D plus 1 3/4”

1 1/4”3/16”

J

K

D minus 1/2”

Nominal Duct Size D”Available Sizes (D” x D”)

D minus 3/4”

MODEL 50F

Model Neck Size Max CFM1 Price Each

Surface

6” x 6” 175 $16

8” x 8” 311 $18

10” x 10” 486 $20

12” x 12” 700 $22

22” x 10” 1070 $31

22” x 22” 2350 $35

Lay-In

10”x10” 486 $14

20”x 20” 700 $14

22” x 10” 1070 $21

22” x 22” 2350 $35

*20” x 20” 2000 $64

Note: 1 - CFM based on max neck velocity of 700 fpm



PLENUM SLOT DIFFUSERS& FIRE RATED PLENUM SLOT DIFFUSERSModel TBDI-80

• Insulated boot plenum

• Pattern controller for full 180 gradual adjustment

• Insulated modulinear diffuser

Product Details

Optional Internal Insulation(TBDI Models)

Optional T-bar Typical1/2”

8”

WL minus 1/4”

3/8” Typical

B

MODEL TBDI-80

Length Inlet Size Fire-Rated Slot Width # Slots Max CFM1 Price Each

24”

6”

1” 2

185$68

6” X $110

8”240

$68

8” X $127

10” 375 $68

48”

6” 230 $94

8”480

$94

8” X $142

10”750

$94

10” X $149

12” 410 $103

Note: 1 - CFM based on NC 35

MODEL PF-TBD

Nominal Steel Price

2-slot x 2’ $21

2-slot x 4’ $33



ALUMINUM MODULINEAR SLOT SUPPLY DIFFUSER, 1” SLOT

INSULATED PLENUM FOR MODULINEAR SLOT DIFFUSER

MODEL ML-39 / MPI-39Product Details

MODEL ML-39

Length No Slots Slot Size Price

24" 2 1" $36

36” 2 1” $53

48" 2 1" $71

Model MPI-39

Length Neck Size No Slots Slot Size Price

24"

6” 1 1” $30

8" 2 1" $30

10" 2 1" $30

36”

6" 2 1" $33

8" 2 1" $33

10" 2 1" $33

48"

6" 2 1" $37

8" 2 1" $37

10" 2 1" $37

12” 2 1” $42

ML-39: • High performance, high quality linear slot diffuser • Designed for variable air volume systems • 1” slots • Projects uniform blanket of air that adheres to the ceiling

even at low flow rates

MPI-39: • Tailored for field attachment to ML modulinear diffusers



ROUND CONCENTRIC DIFFUSERSModel TMR

• Excellent performance in variable air volume applications

• Horizontal discharge settings allows the diffuser to be adjusted for different flow rates.

• Uniform 360 discharge pattern

Product Details

See page 25 for available neck mounted volume dampers.

• Spring lock allows easy removal and replacement of the two inner cones

• Screwdriver adjustment of optional damper

MODEL TMR

Neck Size Mounting Face Size Max CFM¹ Price Damper

6”

Surfacemount

orexposed

11.125” 250 $59 $8

8” 14.75” 425 $61 $9

10” 18.25” 635 $67 $9

12” 22” 850 $76 $11




Product Details

• Air scoop damper.

• Front blades parallel to short dimension.

• Double deflection grille with individual blades for airflow adjustments.

• The US300FS spiral grille is designed for installation to multiple diameter ducts without the need for a true curved frame.

• Available in galvanized or white painted finish.

MODEL US300FS

Neck Fits Diameter Duct CFM (Max) Price

12” x 3” 10” to 36” 260 $80

12” x 6” 12 to 36” 400 $88

17” x 3” 10 to 36” 385 $88

17” x 6” 12 to 36” 590 $99

21” x 3” 10 to 36” 450 $93

21” x 6” 12 to 36” 600 $104

25” x 3” 10 to 36” 525 $98

25” x 6” 12 to 36” 700 $110


ALUMINUM UNIVERSAL DOUBLE DEFLECTIONSPIRAL GRILLES, SUPPLY

Model US300FS



SQUARE TO ROUND NECK ADAPTERSModel SRTGALVANIZED AND BLACK FINISH

• 4 7/8” overall depth

• Square to round transitions slip fit over the square neck or register to permit installation to round or flex duct

Product Details

ROUND TO ROUND TRANSITIONS

$16

$18

$20

8”rd - 6”rd

10”rd - 8”rd

12”rd - 10”rd

Size Price

MODEL SQRD

Neck Diameter Galvanized Finish

BlackFinish Neck Diameter Galvanized

FinishBlackFinish

6” x 6” 6” $7 N/A

20” x 20”

12” $14 $19

8” x 8”6” $7 $9 14” $14 $19

8” $7 N/A 16” $14 N/A

9” x 9” 8” $10 N/A 18” $14 N/A

10” x 10”

6” $10 N/A

22” x 10”

6” $16 N/A

8” $10 $10 8” $16 N/A

10” $10 N/A 10” $16 N/A

12” x 12”

6” $11 N/A

22” x 22”

6” $16 $20

8” $11 $11 8” $16 $20

10” $11 N/A 10” $16 $20

12” $11 N/A 12” $16 $20

14” x 14” 14” $12 N/A 14” $16 $20

15” x 15”12” $12 N/A 16” $16 $20

14” $12 $14 18” $16 $25

20” x 20”

6” $14 N/A 20” $16 $25

8” $14 N/A

10” $14 N/A



A plus 1 1/4”Ceiling Opening = A plus 3/8”

Inside Opening = A-1”

A = Length of ceiling module

Dimensions are in inches

PERFORATED CEILING PANEL T-BAR PLASTER FRAME: Model PXP / TRM

• PXP perforated panels are designed for return or exhaust applications

• Installed by laying between T-bars

• Perforated panel has 3/16 inch diamter holes on 1/4 inch staggered centers

Product Details

• For use in plaster and sheet rock ceilings

Product Details

• Heavy gauge steel

• Heavy gauge steel

• Lay-in style plaster frame that makes installation of GRD products easy

• Steel construction

T-Bar Module

T-Bar By Others1/4 TYP Perforated Face ReturnFront View

Overall Return Size = T-Bar Module - 1/4

Clips adjustable up and down to fit varying ceiling thicknesses

1/2 “ to 7/8”

3/16”

1 1/8”

FIBERGLASS BACK PAN (Titus Model# 72413401)

Nominal Overall Price

24” x 24” 4” - 16” round neck $14

MODEL PXP

Nominal Price

24” x 12” $10

24” x 24” $15

MODEL PF-TBD

Nominal Steel Price

2-slot x 2’ $21

2-slot x 4’ $33

MODEL TRM

Nominal Steel Price Aluminum Price

12” x 12” $17 $22

24” x 12” $20 $22

24” x 24” $24 $26



AIR BALANCING DEVICESModels AG-95D-100

• Opposed blade

• Operating lever is accessible from the face side

• Even air distribution over diffuser neck opening

• Round dampers (Sliding Blade)

• Adjusts with screwdriver from the face side

• Separately mounted in the duct

Product Details

Product Details

• Steel construction

ACCESSORIES

White Touch Up Paint $16.50



HIGH PERFORMANCE SINGLE DUCT TERMINAL UNITS: Model DESV

• 22 gauge casing with slip and drive discharge connection

• Dual density insulation

• Multi point center averaging velocity center

• Control Enclosure with knock outs

Product Details

ACCESSORIES

115/24V & 277/24V Transformers $31

MODEL DESV

Inlet Size Min Max 1-Row Coil 2-Row Coil Terminal Unit Price

6” 66 800 $70 $99 $119

8” 132 900 $107 $125 $131

10” 221 1400 $108 $170 $151

12” 304 2000 $175 $195 $159

14” 439 3000 $217 $275 $201

16” 552 4000 $177 $296 $225



THERMAL VARIABLE AIR VOLUME DIFFUSERMODEL T3SQ-4

Product Details

• Combines the functions of a VAV terminal and a high performance diffuser in one

• Modulates the air volume delivered to a zone to accurately control cooling and heating conditions

• Neck sizes: 8”, 10”, 12”

MODEL T3SQ-4

Neck Size Price

8" $493

10" $493

12" $493



TWIN CITY FANS



TWIN CITY FANSDCRDCentrifugal Roof Exhauster, Direct Drive

• AMCA Air & Sound Licensed

• UL Listed-Standard 705

• Speed Controllable Motors

• Aluminum Bird screen

• Electrical Disconnect

• Shrouds feature a rolled bead edge for rigidity

• Backdraft Damper

• Aluminum Construction

Product Details

See page 37 for curbs.

See page 38 for speed controllers.

Size

085 1/8 1500

0

633

0.08

0.08

0.08

0.10

0.08

0.10

0.08

0.10

0.09

0.10

0.08

0.09

0.088.9

9.4

8.9

9.4

8.9

9.0

7.9

8.3

8.4

8.0

7.6

8.2

7.9

1328

592

1201

581

1168

522

985

457

768

381

496

291

0.100 0.125 0.250 0.375 0.500 0.625

1160120 1/8

MotorHP

CFMBHP SONE

CFMBHP SONE

CFMBHP SONE

CFMBHP SONE

CFMBHP SONE

CFMBHP SONE

CFMBHP SONE

RPM

Static Pressure (Inches W.G.)

DCRD

ModelDimensions (inches)

HPAverageShipping

Weight (lbs)

Curb SizeRequired

FanPrice

CurbPriceA B C D E G

085B 18.5 15.63 2.06 13.2 17.00 1/8 32 15½ x 15½ $322 $84

120B 27.88 22.38 3.63 22.00 20.00 14.50 1/8 50 18½ x 18½ $487 $95



TWIN CITY FANSMODEL T081, T100, T150

Ceiling Exhaust Fan, Direct Drive

• Low profile

• The 100H series has a 6” round duct connector

• Single, impact-resistant centrifugal blower wheel

• 20 gauge galvanized steel housing

• UL listed for use over bathtubs and showers when connected to a GFCI branch circuit

Product Details

*Nominal voltage is 120VAC

*“H” and “V” refer to Horizontal and Vertical mounting

*Amps stated below rated at 60Hz

Notes:

See page 38 for fan accessories (speed controllers, inline adapters, radiation damper kits).

See page 36 for roof and wall caps accessories.

See page 34 for Vibration Isolators ($13/set).

MODEL T (Celing Exhaust Fans)

Ps - Inches of Wg

Model 0.000 0.100 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 RPM AMPS WATTS Price

T081 HCFM 87 76 72 56 38

840 0.3 26.9 $101SONES 1.0 1.5 1.5 2.5 3.0

T100 HCFM 136 115 109 93 80 65 44 12

640 1.1 87 $152SONES 0.5 0.8 0.9 1.3 1.8 2.3 3.0 3.2

T150 HCFM 181 161 157 141 132 124 114 94 62

710 1.3 100 $163SONES 1.3 1.4 1.5 2.2 2.6 3.1 3.6 4.1 4.6

Vibration Hangers for T100H-T700H Ceiling Fans (box of 4): $80




Ps - Inches of Wg


T200 HCFM 231 214 210 196 186 177 165 144 113 51

740 1.8 127 $199SONES 1.6 1.8 1.7 2.3 2.9 3.5 4.1 4.9 5.3 5.3

T250 HCFM 272 261 259 250 242 233 218 201 165 99

830 2.1 166 $205SONES 2.1 2.3 2.2 2.9 3.3 3.9 4.4 4.8 5.5 5.8

T300 HCFM 312 309 308 303 296 287 273 254 219 125

905 2.3 212 $213SONES 2.6 2.9 3.0 3.4 3.6 3.9 4.4 4.7 5.0 5.5

TWIN CITY FANSMODEL T200, T250, T300Ceiling Exhaust Fan, Direct Drive

• Low profile

• The T200, T250, and T300 series have a 8” round duct connector

• Single, impact-resistant centrifugal blower wheel

• 20 gauge galvanized steel housing

• UL listed for use over bathtubs and showers when connected to a GFCI branch circuit

Product Details




Notes:







TWIN CITY FANSMODEL T400, T500, T700

Ceiling Exhaust Fan, Direct Drive

• 120 Volt Single Phase, 1.4 amps.

• 4-1/2” x 18-1/2” duct connector

• Painted white enamel steel grille

• Two impact-resistant centrifugal blower wheels

• Quiet automatic backdraft dampers

• Can be ducted horizontally or vertically. In-line ducting available with separate adapter

• Use Electronic Variable Speed Control to adjust blower speed and sound level (available separately)

Product Details




Notes:





Ps - Inches of Wg


T400 HCFM 480 442 434 388 344 299 229 182 114 33

735 1.4 146 $321SONES 2.0 2.4 2.3 2.8 3.3 3.8 4.5 4.8 5.4 5.6

T500 HCFM 538 520 514 491 463 434 389 339 282 186

810 2.2 232 $353SONES 3.0 3.1 3.3 3.6 4.0 4.4 5.0 5.7 6.2 6.7

T700 HCFM 722 704 701 667 640 607 571 534 453 333

960 2.9 313 $392SONES 4.5 4.6 4.7 4.8 5.0 5.2 5.6 6.2 7.1 7.2




TWIN CITY FANSMODEL T900, T1500CEILING EXHAUST FAN, DIRECT DRIVE

• 120Volt Single Phase

• 12”W x 8”H Duct Connector

• Painted white enamel steel Grille

• Two impact resistant centrifugal blower wheels

• Quiet automatic backdraft dampers

• Can be ducted horizontally or vertically. In-line ducting available with separate adapter.

• Use Electronic Variable Speed Controller to adjust blower speed and sound level (available separately).

Product Details




Notes:





Ps - Inches of Wg


T900 HCFM 918 905 901 877 842 793 725 636 536 390

650 3.0 306 $476SONES 3.8 4.0 4.1 4.0 4.2 4.3 4.4 4.9 4.5 5.3

T1500 HCFM 1578 1526 1513 1438 1371 1285 1198 1103 1000 816

955 5.0 468 $582SONES 8.6 8.4 8.4 8.1 7.5 7.0 6.7 6.2 5.8 5.8






TWIN CITY FANSVIBRATION ISOLATION KITS

FOR CEILING EXHAUST FANS



• All heavy-gauge aluminum

• Low silhouette spun aluminum hood

• Weather resistant design for long life and maintenance free operation

• Galvanized bird screen is standard

• Stock available in 3 sizes for a wide range of performance capabilities

• One piece welded curb cap with round spun inlet for maximum efficiency

• Shipped completely assembled for ease in installation

• Intake or exhaust

Product Details


GRV

SizeNeckArea(ft2)

Dimensions (inches)Estimated

Weight CFM/SP Curb SizeRequired

GRVPrice

CurbPrice

A B C D E F

090B 0.44 22.50 1.50

2

16.50 9 17 0-500/.025” 15” x 15” $169 $83

120B 0.8027.50

11.25 224

12.13 20 500-1000/.035” 22½” x 22½” $212 $109

160B 1.44 12.25 3 16.25 25 1000-1500/.047” 22½” x 22½” $245 $109

GRVCurb Mount Spun Aluminum Gravity Ventilator



ROOF / WALL CAPS

$48634P

Model Price

• Built-in backdraft damper and bird screen

• For 3 1/4” x 10”, 6” Rd, or 8” rd duct

• Steel housing, black electrically bonded epoxy finish

Roof Cap-Black Epoxy Finish

• Model 346S 6” round inlet

• Includes spring loaded damper and bird screen


Aluminum Wall Cap with Bird Screen

• Built-in bird screen

• 0.025 Aluminum - natural finish

• Model 611 up to 8” round inlet

• Model 611CM up to 8” round inlet curb mount

• Model 512 up to 12” round inlet

Aluminum Roof Caps

Model 611 shown here


Size Curb SizeRequired

CapPrice

CurbPrice

611 N/A $67 N/A

612 N/A $120 N/A

611CM 14” x14” $80 $80

612CM 16” x 16” $131 $87



Model Price

346S $30

348S $33

3410S $59

3412S $65



ROOF CURBS & EQUIPMENT RAILS

• Constructed of 18 gauge galvanized steel

• Roof Curbs are 18” high

• Thickness is 1½” filled with 3# density rigid insulation

• Corners are mitered and welded for strength

• Factory installed 2” x 2” wood nailer

Roof Curbs

• Equipment supports are 18” high, 18 gauge galvanized steel curb, base plate and cap with 2” X 4” factory installed wood nailer

• (2) 3/8”-1” tips • (2) 1” - 2” tips • Curb Cover included

Equipment Rails

Pipe Portals (4 Tips) and Curb Covers

18” STD.

Section

18 ga. Galv. Metal

2 X 4 Wood Nailer

2” STD.1½” - 1’ - 0”

O.D. Size Price

12” x 12” $77

13½” x 13½” $79

14” x 14” $80

15” x 15” $83

15½” x 15½” $84

16” x 16” $87

17” x 17” $90

18½” x 18½” $95

19” x 19” $100

20½” x 20½” $105

22½” x 22½” $109

24½” x 24½” $110

27’ x 27” $125

28' x 28” $137

28½” x 28½” $140

32’ x 32” $145

32½” x 32½” $150

Length Price

3’ $99

4’ $109

5’ $127

6’ $157

Model Price

RPC-212 $90



www.FaulknerHaynes.com

FAN ACCESSORIES

RADIATION DAMPERS FOR 100-700 FANS& METAL GRILLE FOR 100-300 FANS

$98

$129

$31

RD-1

RD-2

MG-1

100-300 Damper

400-700 Damper

Metal Grille 100-300

Model Fan Size Price

• Combination Fire/Radiation Damper

• UL Rated for 3Hr protection

• Metal grille has a white finish

• Creates cabinet exhaust fan into a inline fan

• Easy installation with detailed instructions

Fan Radiation Dampers & Metal Grille

Fan Inline Adapter Kits

• 3A (80L) - 3 amp 120v unit mounted speed controller

• 3A (57W) - 3 amp 120v wall mounted (white) fits single gang box

• 6A (72W) - 6 amp 120v wall mounted (white) fits single gang box

Fan Speed Controller

$33

$31

3A (80L)

3A (57W)

Amp Price

$646A (72W)

FAN INLINE ADAPTER KITS

Model Size Price

961 L 100-150 Fans $22

981 L 200-300 Fans $22

982 L 400-700 Fans $33

983 L 900-1500 Fans $34


POTTORFF



CAD/DMRCam-Latched Access Door/

Sandwich Panel Access Door

• For sizes below 12” x 12”, 24 gauge galvanized steel is used

• Insulation is 1 thick fiberglass

• Frame is constructed of 22 gauge galvanized steel

• Model CAD duct access doors employ an insulated door panel to provide a convenient and economical means to obtain access to components in ductwork utilized in low to medium pressure and velocity applications

• Model DMR access doors employ a fully removable dual-panel-door to provide a convenient and economical means to obtain access to components in round ductwork utilized in low, medium, and high pressure and velocity applications.

• The gasket is compressible closed cell neoprene—door to frame and frame to duct

• Latches are plated steel, cam type

Product Details

POTTORFF

MODEL CAD

Model Size PriceCAD06X06 06X06 25.00

CAD08X08 08X08 25.00

CAD10X10 10X10 25.00

CAD12X12 12X12 27.00

CAD14X14 14X14 41.00

CAD16X16 16X16 41.00

CAD18X18 18X18 42.00

CAD

DMR

MODEL DMR

Model Size PriceDMR06 6” 44.00

DMR08 8” 44.00

DMR10 10” 61.00

DMR12 12” 61.00

DMR14 14” 88.00

DMR16 16” 88.00

DMR18 18” 88.00

DMR20 20” 88.00



CFD-153-Hour Ceiling Radiation Damper

Size Price Size Price

$24

$406 x 6

12 x 12

8 x 8

14 x 14

9 x 9 20 x 20

22 x 2210 x 10

16 x 16

$24

$34

$29 $53

$56

$46

$29

CFD-15-NS


$27 $45

6

8

10

16

14

12

$25 $40

$28

$37

CFD-15R-NS

• The CFD-15 ceiling radiation damper employs butterfly style blades for point-of-origin control of radiant heat in HVAC systems

• The CFD-15 is installed horizontally in the ceiling membrane of floor-ceiling or roof-ceiling assemblies with fire resistance ratings up to and including 3 hours

• Frame: 22 gauge galvanized steel. (24 gauge CFD-15R)

• Blades: 22 gauge galvanized steel – butterfly

• Insulated with ceramic refractory material for dampers larger than 114 in2

• Fire Closure Device: Fusible link

• Fire Closure Temperature: 165°F

Product Details

CFD-15-NS CFD-15R-NS

THERMAL BLANKETS

$2024” x 24”

POTTORFF

FUSIBLE LINKS

Rating Type Price

165 deg Static 5.00

165 deg Dynamic 5.00

212 deg Dynamic 5.00



VFD-ISB / VFD-ISBRFire Dampers

• Type B Fire Dampers • UL listed for Static and Dynamic requirements • Good for Horizontal and Vertical applications • Integral 14” sleeve

Product Details

Type B

POTTORFF

VFD-ISB16

SizePrice

SizePrice

SizePrice

SizePrice

W H W H W H W H

Damper Angles Damper Angles Damper Angles Damper Angles

6 6 $42 $3

14

8 $48 $6

18

10 $53 $7 20

18 $68 $9

86 $42 $4 10 $50 $6 12 $61 $7 20 $77 $9

8 $46 $4 12 $56 $6 14 $61 $8

24

12 $68 $9

10

6 $42 $4 14 $56 $7 16 $68 $8 14 $68 $9

8 $46 $5

16

6 $48 $6 18 $68 $9 16 $77 $9

10 $46 $5 8 $48 $6

20

6 $50 $6 18 $77 $10

12

6 $42 $5 10 $50 $6 8 $50 $7 20 $84 $10

8 $46 $5 12 $56 $7 10 $53 $7 24 $103 $11

10 $46 $6 14 $56 $7 12 $61 $8 - - -

12 $51 $6 16 $63 $8 14 $61 $8 - - -

14 6 $48 $5 18 8 $64 $6 16 $68 $9 - - -

VFD-ISBR


6 $42 14 $69

8 $46 16 $77

10 $46 18 $83

12 $62 20 $95

14” (305)Std.



POTTORFFEFD-245 / EFD-437Extruded Aluminum Louver

• The EFD-437 drainable blade louver is designed to prevent water penetration in non-wind-driven rain applications by collecting water in frame and blade gutters and channeling it into downspouts and away from airflow paths

• The EFD-437 is available in a wide array of anodized and painted finishes including custom color matching

• Material: Mill finish 6063-T5 extruded aluminum

• Frame: 4” deep x 0.081” thick channel

• Blades: 37.5° x 0.081” thick drainable style

• Mullion: Visible

• Screen: 1/2” x 0.063” expanded and flattened aluminum

Product Details

MODEL EFD

Model # Stock W x H Square Foot F.A. Intake CFM (Max) Price

EFD-2458 x 8 0.1 100 $82

12 x 12 0.3 300 $82

EFD-437

18 x 18 0.9 900 $126

24 x 12 0.9 900 $135

24 x 24 1.9 1900 $152

36 x 36 4.9 4900 $287

48 x 48 9.2 9200 $423

Additional Sizes Available Standard Ship from Mfr.


YOUNG REGULATOR



YOUNG REGULATOR

MODEL 4011 SPRING RETURN MOTORIZED DAMPER W/ ANTI-BACKLASH (24V OR 120V)

• The Young Regulator 4011 round 2- position motorized damper is ideal for zone control, outside air, air intake, and exhaust air vents

• Power Open/Close • Spring Return w/ Anti-Backlash • Available in 24v or 120v • “Lost motion” drive to protect gear train from closing shock

Product Details

MODEL 4011

Size 24v 120v

6" $116 $116

8" $128 $128

10" $140 $140

12" $151 $151

MODEL 4095 ROUND BAROMETRIC PRESSURE RELIEF DAMPER

• The Young series 4095 is used to automatically bypass excess air when increases in duct static pressure occur due to the closing of zone dampers

• Integral weighted control lever for easy adjustments • Recommended for low pressure systems

Product Details

MODEL 4095

Size Price

8" $95

10" $102

12" $107



MODEL 5020CC

Size Price

6" $46

8" $49

10" $55

12" $56

YOUNG REGULATOR

MODEL 5020CC ROUND MANUAL DAMPER

FROM BOWDEN CABLE CONTROLS

• The 5020CC allows remote adjustment of hard to access balancing dampers from up to 50’ away

• Rack and pinion controller • Flexible casing and wire assembly • Eliminates need for access doors

Product Details

5020CC Tools/Accessories

Item Description Price

270-275B-PH Bowden Remote Cable Ctrl (use with 5020CC) w/ Philips Adj $43

270-301B Bowden Remote Cbl Ctrl w/ Ceiling Cup and Cover $47

270-896B Bowden Remote Cbl Ctrol w/ Ceiling 1" Cap $53

270-65-1/4 Bowden Lever Arm for dampers w/ 1/4" Shaft $10

BCW-50 Bowden Casing & Wire - 50ft Spool $95

BCW-6 Bowden Casing and Wire - 6ft Length $10

BCW Bowden Casing & Wire - custom length (per foot) $2

030-12 Bowden Control Wrench $11



YOUNG REGULATORYOUNG REGULATOR

MODEL 800AWO-T OVAL CABLE CONTROLLED DAMPER (FOR USE WITH TITUS PLENUMS)

• The 800AWO is used to control air to a low profile plenum with an oval air inlet.

• Designed to fit Titus MPI-39 plenums • Flexible casing and control wire accessible from inside

slot diffuser • Thumb screw locks damper in place when desired air

flow achieved

Product Details

MODEL 800AWO-T

Size Price

6" $67

8" $69

10" $72

12" $79



MODEL DA-CO2

Size w/ Wall Mount Sensor w/ Duct Mount Sensor

6" $625 $571

8" $629 $575

10” $630 $576

12” $659 $605

14” $675 $621

YOUNG REGULATOR

MODEL DA-CO2 ROUND CO2 INDOOR AIR

QUALITY DAMPER

• The 5020CC allows remote adjustment of hard to access balancing dampers from up to 50’ away

• Rack and pinion controller • Flexible casing and wire assembly • Eliminates need for access doors

Product Details

Duct Mounted Sensor

Wall Mounted Sensor



LG



LG

• Ductless wall-mounted mini-split “High Efficiency” and “Extended Piping” models

• Systems can be used for equipment cooling down to 0°F ambient temperature with the addition of a wind baffle

• Indoor units include LG Smart ThinQ - a built-in WiFi module for remote monitoring and control

• Includes dipswitch to disable heating on cooling-only applications

• Indoor units are powered by outdoor units

• Power supply: 208/230V, 1-phase, 60 Hz

• See mini-split accessories page for linesets, pumps, wiring, etc.

• For full product specifications, see www.lghvac.com

Product Details

WALL-MOUNTED MINI-SPLITS

COMPATIBLE CONTROLLERS

Controller Model Description Price

AKB74955602 Wireless HandheldIncluded with

indoor unit

PREMTC00U Wired, Simple $213

PREMTBVC0Wired, CRC1 Program-

mable w/ BACnet$303

PREMTBVC1Wired, CRC1+ Program-

mable w/ BACnet$328

PDRYCB300Dry Contact for 3rd- Party

Thermostat$180

PMNFP14A1PI485 for Integration to

LG VRF Controls$121

See Mini-Split controls page for detailed controls information.

WIND BAFFLES

Wind Baffle Model Compatible Outdoor units Price

ZLABGP01A 9,000 & 12,000 Btu/h $106

ZLABGP02A 18,000 to 36,000 Btu/h $115

Outdoor unit. Size may vary with capacity.

HEAT PUMP SYSTEMS

Indoor Unit Model

Outdoor Unit Model

Rated Cooling Capacity (Btu/h)

Rated Heating Capacity at

47°F (Btu/h)SEER HSPF

Line Size (Liquid -

Gas)

Max Total Piping

Length (ft)

Max Height

Difference (ft)

Recommended Breaker Size

(Amps)Price

LSN090HSV5 LSU090HSV5 9,000 10,900 23.5 11.31/4" - 3/8" 82

4915

$1,348

LSN120HSV5 LSU120HSV5 12,000 13,600 22.7 11.4 $1,472

LSN180HSV5 LSU180HSV5 18,000 21,600 21.5 10.2

3/8" - 5/8"

114 20 $2,135

LSN243HLV LSU243HLV 22,000 27,000 21.5 11.0

164 98 25

$2,159

LSN303HLV LSU303HLV 30,000 32,000 19.0 10.0 $2,314

LSN363HLV LSU363HLV 33,000 35,200 17.5 10.0 $3,034

Wall-mounted indoor unit. Size may vary with capacity.

LG



LG

• Ductless wall-mounted mini-split “Mega 115V” models for use when higher voltage is not available

• Systems can be used for equipment cooling down to 14°F ambient temperature (no wind baffle available)

• Indoor units are powered by outdoor units • Power supply: 115V, 1-phase, 60 Hz • See mini-split accessories page for linesets, pumps, wiring, etc. • For full product specifications, see www.lghvac.com

Product Details

WALL-MOUNTED MINI-SPLITS115V



AKB73835318 Wireless HandheldIncluded with

indoor unit



mable w/ BACnet$303


mable w/ BACnet$328


Thermostat$180


Outdoor Unit. Size may vary with capacity.

Wall-mounted indoor unit. Size may vary with capacity.

HEAT PUMP SYSTEMS

Indoor Unit Model

Outdoor Unit Model



47°F (Btu/h)SEER HSPF

Line Size (Liquid -

Gas)

Max Total Piping

Length (ft)

Max Height

Difference (ft)


(Amps)Price

LSN090HXV LSU090HXV 8,500 10,900 17.0 9.01/4" - 3/8" 49 22 20

$920

LSN120HXV LSU120HXV 12,000 13,000 17.0 9.0 $1,005

LG



• Ductless ceiling cassette mini-split systems designed for commercial cooling and heating


• Indoor units provides four-way flow, built-in condensate pumps, and knockouts for outside air and branch ducts

• Compact model can fit into standard 2’x2’ ceiling grid with zero overhang using the PT-QCHW0 grille option

• Indoor units are powered by outdoor units • Power supply: 208/230V, 1-phase, 60 Hz • See mini-split accessories page for linesets, pumps, wiring, etc. • For full product specifications, see www.lghvac.com

Product Details

CEILING CASSETTE MINI-SPLITS



PQWRHDF0 Wireless HandheldIncluded with

indoor unit



mable w/ BACnet$303


mable w/ BACnet$328

PWFMDD200Wi-Fi module for use with

LG SmartThinQ$122


Thermostat$180


LG VRF Controls$121


WIND BAFFLES


ZLABGP01A 9,000 & 12,000 Btu/h $106

ZLABGP04A 18,000 & 24,000 Btu/h $131

ZLABGP04A, Qty. 2 36,000 Btu/h $262

FLANGE FOR OUTSIDE AIR

Model Duct Size (in) Price

PTVK430 3" $28


Ceiling cassette indoor unit. Size may vary with capacity.

LG

HEAT PUMP SYSTEMS

Indoor Unit Model

Outdoor Unit Model


Rated Heating Capacity at 47°F (Btu/h)

Approximate Indoor Unit Dimensions

(in)

SEER HSPFLine Size (Liquid -

Gas)

Max Total Piping

Length (ft)

Max Height

Difference (ft)

Recc. Breaker

Size (Amps)

Price

LCN098HV4 *1 LUU097HV 9,000 11,000 22 x 22 20.2 10.51/4" - 3/8" 66 49 15

$2,107

LCN128HV4 *1 LUU127HV 11,600 14,000 22 x 22 19.4 10.4 $2,371

LCN188HV *1 LUU189HV 18,000 18,500 22 x 22 20.5 20.0 1/4” - 1/2” 164

98

30 $3,219

LCN247HV *2 LUU247HV 24,000 27,000 33 x 33 17.0 9.73/8” - 5/8” 246 30

$3,699

LCN367HV *2 LUU367HV 36,000 38,000 33 x 33 19.0 9.5 $4,579

*1 Includes grille, PT-UQC (Standard) or PT-QCHW0 (True 2’x2’)*2 Includes grille, PT-UMC1



LG

• Horizontal ducted mini-split systems designed for commercial cooling and heating


• Includes built-in condensate pump • Indoor units are powered by outdoor units • Power supply: 208/230V, 1-phase, 60 Hz • See mini-split accessories page for linesets, pumps, wiring, etc. • For full product specifications, see www.lghvac.com

Product Details

DUCTED MINI-SPLITS





mable w/ BACnet$303


mable w/ BACnet$328


LG SmartThinQ$122


Thermostat$180

PMNFP14A1PI485 for Integration to LG

VRF Controls$121


Outdoor Unit. Size may vary with capacity.

Low static ducted indoor unit. Size may vary with capacity.

High-static ducted indoor unit. Size may vary with capacity.

HEAT PUMP SYSTEMS

Indoor Unit Model

Outdoor Unit Model



External Static

Pressure (in Wg)


Gas)

Max Total Piping

Length (ft)

Max Height

Difference (ft)

Recc. Breaker

Size (Amps)

Price

LDN097HV4 LUU097HV 9,000 14,000

0.20

18.5 10.31/4" - 3/8" 66 49 15

$2,110

LDN127HV4 LUU127HV 11,100 16,000 19.6 10.5 $2,260

LDN187HV4 LUU189HV 18,000 20,000 18.0 11.5

3/8" - 5/8"164

9830

$2,764

LHN247HV LUU247HV 24,000 27,000 0.78 17.0 10.0 $3,078

LHN367HV LUU367HV 36,000 40,000 0.60 17.6 9.2 246 40 $4,252

WIND BAFFLES


ZLABGP01A 9,000 & 12,000 Btu/h $106

ZLABGP04A 18,000 & 24,000 Btu/h $131




Product Details

VERTICAL AIR HANDLERS

WIND BAFFLES


ZLABGP04A 18,000 & 24,000 Btu/h $131



Vertical/horizontal air handler. Size may vary with capacity.

HEAT PUMP SYSTEMS

Indoor Unit Model

Outdoor Unit Model



47°F (Btu/h)

External Static

Pressure(in Wg)


Gas)

Max Total

Piping Length

(ft)

Max Height Differ-ence (ft)

Recom-mended Breaker

Size (Amps)

Price

LVN180HV4 LUU188HV 18,000 20,000

.5

19.0 11.3

3/8" - 5/8"164

9830

$3,582

LVN240HV4 LUU248HV 24,000 27,00018.0 10.0

$3,994

LVN360HV4 LUU368HV 36,000 40,000 246 40 $4,772

LG

• Vertical or horizontal ducted mini-split systems designed for commercial cooling and heating

• Systems can be used for equipment cooling down to -4°F ambient temperature with the addition of a wind baffle

• Air handler can be configured for vertical upflow, downflow, or horizontal applications

• Built-in dry contact for 3rd-party thermostat

• Built-in filter rack for 1” filters

• Indoor units are powered by outdoor units

• Power supply: 208/230V, 1-phase, 60 Hz

• See mini-split accessories page for linesets, pumps, wiring, etc.

• For full product specifications, see www.lghvac.com





mable w/ BACnet$303


mable w/ BACnet$328


LG SmartThinQ$122

PMNFP14A1PI485 for Integration to LG

VRF Controls$121




• Multi-zone mini-split systems to serve multiple indoor units with a single outdoor unit


• Minimum of two indoor units must be connected • Connected indoor capacity must be between 40% - 133% of

outdoor unit capacity (see detailed combination tables) • Indoor units are powered by outdoor units • Power supply: 208/230V, 1-phase, 60 Hz • See mini-split accessories page for linesets, pumps, wiring, etc. • For full product specifications, see www.lghvac.com

Product Details

MULTI-ZONE MINI-SPLITS

Multi-zone outdoor unit. Size may vary with capacity.

LG




PREMTBVC0Wired, CRC1

Programmable w/ BACnet

$303

PREMTBVC1Wired, CRC1+

Programmable w/ BACnet

$328

PWFMDD200Wi-Fi module for use with LG SmartThinQ

$122

PDRYCB300Dry Contact for 3rd-

Party Thermostat$180


LG VRF Controls$121


HEAT PUMP SYSTEMS

Outdoor Unit Model

Max Number of

Indoor Units



SEER (Ducted /

Non-ducted)

HSPF (Ducted / Non-

ducted)

Max Total

Piping Length

(ft)

Max Piping Length

Per Indoor Unit (ft)

Max Height

Difference (ft)


(Amps)Price

LMU18CHV 2 17,000 22,000 22.0 / 17.2 9.7 / 9.7 164

82 33

20$1,455

LMU24CHV 3 20,000 24,000 21.7 / 17.5 10.6 / 9.8

246

$1,710

LMU30CHV 4 30,000 32,000 22.0 / 18.2 10.0 / 9.725

$2,151

LMU36CHV 4 32,000 36,000 22.0 / 18.2 10.0 / 9.7 $2,592

Indoor Unit Model



Line Size (Liquid -

Gas)Price

WA

LL-M

OU

NTE

DIN

DO

OR

UN

ITS

LMN079HVT 7,000 8,100

1/4" - 3/8"

$465

LSN090HSV5 9,000 10,900 $504

LSN120HSV5 12,000 13,600 $562

LSN180HSV5 18,000 21,6001/4" - 1/2"

$804

LMN249HVT 24,000 25,600 $974

CE

ILIN

G

CA

SS

ETT

E

IND

OO

R

UN

ITS

(2

2"

X 2

2") LCN097HV4 *1 9,000 11,000

1/4" - 3/8"$668

LCN127HV4 *1 11,100 14,000 $806

LCN188HV4 *1 18,000 18,500 1/4” - 1/2” $1,409

HO

RIZ

ON

TAL

DU

CTE

D

IND

OO

R U

NIT

S

(ES

P =

0.2

0

INW

G)

LDN097HV4 9,000 10,4001/4" - 3/8"

$671

LDN127HV4 12,000 13,800 $695

LDN187HV4 18,000 20,800 1/4” - 1/2” $954

VER

TI-

CA

L A

HU

IN

DO

OR

U

NIT

S(E

SP

= 0

.50

IN

WG

) LVN180HV4 18,000 20,0001/4” - 1/2”

$1,772

LVN240HV4 24,000 27,000 $1,902

*1 Includes grille, PT-UQC (Standard) or PT-QCHW0 (True 2’x2’)

WIND BAFFLES


ZLABGP03A 18,000 & 24,000 Btu/h $123

ZLABGP04A 30,000 & 36,000 Btu/h $131



MINI-SPLIT CONTROLS

Simple Remote Controller CRC1 & CRC1Remote Controllers

Dry Contact for3rd-Party Thermostat

Wi-Fi module for use withLG SmartThinQ

LG

CONTROLS

Model Description Details Price

PREMTC00U Wired, Simple Remote Controller Non-programmable controller with dual setpoint control. $213

PREMTBVC0 Wired, CRC1 Programmable w/ BACnetProgrammable controller with customizable user interface.

Includes built-in BACnet MS/TP.$303

PREMTBVC1 Wired, CRC1+ Programmable w/ BACnetProgrammable controller with customizable user interface and

on-board motion and humidity sensors. Includes built-in BACnet MS/TP.

$328

PWFMDD200 Wi-Fi module for use with LG SmartThinQ Wi-Fi module for use with LG SmartThinQ $122

PDRYCB300 Dry Contact for 3rd-Party Thermostat Allows nearly any third-party thermostat to control indoor units. $180

PMNFP14A1 PI485 for Integration to LG VRF ControlsAllows compatible LG mini-splits to communicate with the LG

VRF controls network.$121

PZCWRC1 30 ft Extension Cable for Wired ThermostatsExtension cable includes pre-installed terminals to easily in-

crease the length between indoor unit and controller.$21

PZCWRCG3 Group Control Cable KitUsed to control two or more indoor units from a single remote

controller.$16



• Two insulated linesets are machined together for faster and easier installation (Twinned linesets only)

• White polyethylene jacket protects foam insulation from tearing during installation process

• Jacket includes sequential foot markings to ensure accurate refrigerant charge

• Insulation is UV resistant and can be painted to match the surroundings

• Wiring to connect the indoor and outdoor units for mini-splits • Provides both power and control cable between indoor and

outdoor units • Sunlight resistant and suitable for direct burial

Product Details

Product Details

TWINNED LINESETS

Model Line Size(Liquid - Gas)

Insulationthickness (in) Length (ft) Price

TG.LSIN143812050 1/4" - 3/8" 1/2" 50' $150

TG.LSIN141212050 1/4" - 1/2" 1/2" 50' $176

TG.LSIN385812050 3/8" - 5/8" 1/2" 50' $231

INDIVIDUAL LINESETS

Model Line Size(Liquid - Gas)

Insulationthickness (in) Length (ft) Price

F100.GUS385012 3/8" 1/2" 50' $90

F100.GUS345012 3/4" 1/2" 50' $150

MINI-SPLIT WIRING

Model Part Number Description Use Color Packaging Type Length (ft) Price

107010703908 14/4, Stranded, THHN,

600V, Tray Cable Must be installed indoors in cable tray or conduit

Black Coil 50' $42

10700108 Black Reel 250' $207

107510753908 14/4, Stranded, THHN,

Jacketed Metal CladCan be installed indoors

without conduitBlack Coil 50' $63

10750108 Black Reel 250' $321

PRE-INSULATED TWINNED AND SINGLELINESETS

MINI-SPLIT WIRING

MINI-SPLIT AND VRF ACCESSORIES LG



MINI-SPLIT AND VRF ACCESSORIES

ELECTRICAL DISCONNECT SWITCHES

• Disconnect switch between the indoor and outdoor units for mini-splits

• Specialty 3-pole switch

Product Details

LG

Model Description Use Color Price

MS303-DS 30 A, 600V, Toggle 3-Pole AC Switch Mini-split indoor unit disconnect Black $49

• The Refco Combi and Gobi II pumps have a massive flow range and are specifically designed for mini-split and VRF systems.

• The Refco Combi and Gobi II pumps feature a digital water sensor, universal voltage, and selectable flow levels for quieter operation.

• The Refco Combi pump can be installed in any orientation, while the Gobi II is installed directly beneath a wall-mounted indoor unit.

• The SS610E indoor drain sensor is typically used as a float switch on indoor units where no pump is required

Product Details

Model Description Use Voltage Max Flow (gallons/hr) Max Head (ft) Max Suction (ft) Price

3004046Refco Combi; Multi-position installation

120,000 Btu/h and below

100V - 240V 11 65.6 9.8 $104

3004045Refco Gobi II;

Mounts beneath wall-mounted unit

120,000 Btu/h and below

100V - 240V 11 65.6 9.9 $122

SS610E Indoor Drain SensorUnits where no

pump is required15V - 250V -- -- -- $71

CONDENSATE PUMPS AND SENSORS

Refco Combi Condensate PumpRefco Gobi II Condensate PumpSS610E Indoor Drain Sensor



MINI-SPLIT OUTDOOR UNIT PADS, MOUNTS, AND BRACKETS

• UltraLite pads are lightweight, durable and feature a concrete surface to be installed on level ground.

• QuickSling mounting stands use powder-coated steel tubing keep outdoor units above the snow line.

• QuickSling mounting stands can be mounted on a concrete pad or a roof and the height-adjustable feet can be bolted down

• Both the QuickSling wall bracket and mounting stands include legs that can be adjusted to fit any mini-split

• Hef-T-Block mounting blocks can be used as a simple support when condensing units must be bolted down.

Product Details

Model Description Dimensions Mounting Height Weight (lbs) Max Outdoor Unit Weight (lbs) Price

UC1636-3UltraLite Lightweight

Concrete Equipment Pad

Length: 16"Width: 36"

3"11 754 $23

UC2442-3 Length: 24"Width: 42" 18 1309 $35

QSMS1201 QuickSling Single-Fan Mounting Stand

Width: 34" - 40" Depth: 25" 12" -- 400 $137

QSMS1202 QuickSling Dual-Fan Mounting Stand

Width: 34" - 42" Depth: 36" 12" -- 400 $146

QSWB2000 QuickSling Wall Bracket Width: 34" Depth: 25" -- 3.25 350 $90

230-MB17W Hef-T-Block Mounting Blocks (Pack of 2)

Length: 17"Width: 3.5" 3.5" 3.25 900 $16

230-MBCW End Caps for Hef-T-Block (Pack of 4) -- -- -- -- $7

MINI-SPLIT AND VRF ACCESSORIES LG

UltraLite Lightweight Concrete Equipment Pad

QuickSling Mounting Stand QuickSling Wall Bracket Hef-T-Block Mounting Blocks



• Control wiring for LG VRF systems between indoor units, outdoor units, and heat recovery units.

• Thermostat wiring for all LG VRF and mini-split systems. • Jacket includes sequential foot markings.

Product Details

Model Description Use Color Packaging Type Length(ft) Price

18010018/2, Tinned

Copper, Shielded, Plenum-rated

Control wiring between IUs, OUs, HRUs

WhiteReel 1,000

$221

004370-1222/3, Bare Copper,

Plenum-ratedThermostat Wiring White / Brown Stripe $140

VRF CONTROL WIRING

MINI-SPLIT AND VRF ACCESSORIESLG

• Full-port ball valves are used to isolate indoor units or piping sections on VRF systems

• Includes Schrader service valve • Includes insulation

Product Details

Model Part Number Size Insulation Thickness (inches) Description Price

NBV02-S NBV02-S-IN 1/4"

3/4"Brazed connections,

Schrader valve, insulation

$28

NBV03-S NBV03-S-IN 3/8" $28

NBV04-S NBV04-S-IN 1/2" $28

NBV05-S NBV05-S-IN 5/8" $28

NBV06-S NBV06-S-IN 3/4" $46

ISOLATION BALL VALVES


MASON INDUSTRIES

CERTIFIED CALCULATIONS BY PROFESSIONAL ENGINEERS

Certified Seismic Restraints

Once again MASON is setting the pace, leading in the resilient mounting of equipment in Blast and Seismic Zones.



MASON INDUSTRIESVIBRATION ISOLATION

Spring Mounts, Hangers, Pads

MODEL 30N

Type

76 lbs. or 1½” Water Pipe

113 lbs. or 2” Water Pipe

130 lbs. or 2½” Water Pipe



X-76

X-113

X-130

X-210

B-336

Price Each

$32

$32

$36

$38

$60

Weight Capacity

MODEL SLF

Type

Up to 133 lbs.

Up to 130 lbs.

Up to 200 lbs.

Up to 400 lbs.

Up to 625 lbs.

Up to 1000 lbs.

X-113

X-130

A-200

A-400

A-625

B-1000

Price Each

$32

$36

$46

$53

$54

$77

Weight Capacity

MODEL SW (SUPER W)

Price EachSize

$243 X 3 X 3/4” Thick

Spring Mounts

Spring/Neoprene Hangers

Neoprene Hanger

Waffle Pads

*Call for larger sizes.

Note:

*Call for larger sizes.

*Based on 10’ Hanger Spacing

Notes:

3x3 provides (9) 2-inch modules

Note:

MODEL HDA

Type/Model

$19

$19

0-35 LBHDA Black

HDA Red 30-75 LB

Weight Rating Price



SEISMIC RESTRAINTSAnchor Bolts, Cable Braces

SEISMIC ANCHOR BOLTS & STUDS

Call forPricing

SAS 3/8”

SAS 1/2”

SAS 5/8”

SAST 3/8”

SAST 1/2”

5/8”

Model Size Price

SEISMIC CABLE BRACES

Call forPricing

SCB-1 1/8”

SCB-2 3/16”

SCBH-0 1/16”

SCBH-1 1/8”

SCBH-2 3/16”

Model Cable Size Price

Model SCBH

Model SCB

SASTSeismic Anchor Self Tapping

SASSeismic Anchor Stud

*Setting Tool $5.00

Note:

*Call For Quantity Pricing on SCB

* Aircraft Cables available in the following sizes: 1/16”, 1/8”, 3/16” and 3/32”

Notes:

SCB-0 1/16”

SAST

MASON INDUSTRIES


VARIABLE FREQUENCY DRIVESDANFOSS



DANFOSS VLT HVAC DRIVES

HP

7.5 11

5 8.2VLT-FC-102-5HP-460-3Ø

VLT-FC-102-7.5HP-460-3Ø

VLT-FC-102-10HP-460-3Ø

VLT-FC-102-15HP-460-3Ø

VLT-FC-102-20HP-460-3Ø

VLT-FC-102-25HP-460-3Ø

VLT-FC-102-30HP-460-3Ø

VLT-FC-102-40HP-460-3Ø

VLT-FC-102-50HP-460-3Ø

$1223 $1663 N/A

N/A

N/A

N/A

N/A

N/A

$1289 $1720

$1420 $1854

$1685 $2254 $2327

$2029 $2418

$2455 $2874 $3254

$2798 $3229 $3643

$3258 $3713

$4109 $4683

10 14

15 21

20 27

25 34

30 40

40 52

50 65

Type AmpsBase Drivewith Disc

Vertical Bypass w/ 2 Contactor Bypass and Disconnect

Horizontal w/Bypass

• Wall Mount, NEMA 1, UL Type 1

• Horse power ratings from 5 to 50

• Dual DC Link Reactors

• Flexible Menu Structure

• System Protection

• Drive Protection

• Motor Protection

• Automatic Energy Optimization (AEO)

• Automatic Switching Frequency Modulation (ASFM)

• Control Board

• EMI/RFI filter, built-in

• Choke, built-in

• Communications

• Advanced Control Panel

– 5% DC-Link reactors integrated

– Intuitive navigation

– Four independent PID Loops

– HVAC Application Menu

– Personal Menu

– Quick Startup Menu

– Belt Monitoring

– No flow pumping, dead head protection

– Metal oxide varistors and capacitor snubber on the input

– Input short circuit

– Ground fault and phase loss

– UL I2T overload

– Output short circuit

– Ground fault and phase loss

– Adjusts motor voltage to optimize energy savings

– Quiet motor operation at critical flow conditions

– Pump end of curve protection

– Automated Vibration avoidance

– Reduction in harmonics

– No voltage drop or efficiency losses

– 2 Programmable Analog Inputs

– 1 Programmable Analog Output

– 6 Programmable Digital Inputs (2 Can be Digital Outputs)

– Up to 31 drive on one serial bus

– Real Time Clock

– Displays up to four meters simultaneously

– Plain language alarms and warnings

– Two level password protection

– Hot-Pluggable Keypad

– Johnson controls Metasys® N2, Modbus RTU, Siemens Apogee® FLN standard, BACnet MS/TP

– USB port enables programming and monitoring via PC

– 2 Relay Outputs

– Expandable with Optional Cards

DANFOSS VLT HVAC Drive FC 102 Product Features

Drive Only

$792

$1018

$1583

$2356

$876

$1274

$2007

$2827

$3563

DANFOSS

VLT HVAC DRIVES



HART COOLEY FLEXIBLE AIR DUCTMODEL F218

• Class I Air Duct • Metalized polyester jacket with reinforced fiberglass scrim • Two-ply black polyester core • Rated pressures (UL-181): 12 in W.C. positive, ½ in W.C. negative • Rated maximum air velocity: 5000 FPM • Silver Jacket • UL Listed

Product Details

FLEXIBLE DUCT

PRODUCT SPECIFICATIONS

Diameter 4-20 inches (6-20 inches in stock)

Pressure Rating Inches in Water Guage (WG)

Positive Pressure 12 inches

Negative Pressure ½ inch

Velocity 5000 FPM

R-Value R - 8.0

F218 HART COOLEY FLEXIBLE DUCT

Diameter Price Per 25’ Length6 $58

8 $71

10 $88

12 $104

14 $128

16 $152

18 $180

20 $230


STERLINGGAS FIRED UNIT HEATERS



STERLING

• GG Series gas-fired unit heaters combine the latest tubular heat exchanger technologies with a unique single-orifice burner system for superior durability, reliability and performance. GG Series propeller units are available in sizes from 30 to 120 MBH and offer industry leading operating efficiencies in a compact low-profile design perfect for applications where space is limited.

• Standard features: direct spark ignition, power vented, LP conversion kit included, field convertible to separated combustion (must add 11AS-X7-4 or 11AX-X7-5), 10 year heat exchanger warranty

Product Details

GG SERIES

GG SERIES

Model Description BTUs Efficiency BTU output Weight Price LP conv kit

GG030 power vented gas fired unit heater 30,000 82% 24,600 70 $611 std







UNIT HEATER ACCESSORIES

Model Description Price

VC-4 4" vent Cap GG75-120 $72

X7-4 4" concentric vent kit GG60-75 $232

X7-5 5" concentric vent kit GG90-120 $332

T1 Swivel Hanging Bracket $121

T87K 1 stage Heating only T-stat $45



TF SERIES

Model Description BTUs Efficiency BTU output Weight Price LP conv kit

TF100 power vented gas fired unit heater 100,000 82% 83,000 173 $840 $51

TF150 power vented gas fired unit heater 150,000 82% 124,500 195 $945 $51

TF175 power vented gas fired unit heater 175,000 82% 145,250 241 $1,075 $51





• TF Series gas-fired unit heaters combine the latest tubular heat exchanger technologies with an innovative “In-Shot” burner system for superior durability, reliability and performance in a commercial unit heater. Units are propeller (TF) configurations . Sizes range from 100 to 400 MBH with industry leading operating efficiencies and carry a 10-year heat exchanger warranty.

• Standard features: direct spark ignition, power vented, 10 year heat exchanger warranty. LP conversion kit, if can required, can be added.

Product Details

TF SERIES

UNIT HEATER ACCESSORIES

Model Description Price

M2-2 5" vent cap TF150-250 $80

T1 Swivel Hanging Bracket $121

T87K 1 stage Heating only T-stat $45

STERLING


NOTES


NOTES

Faulkner / Haynes & Associates, Inc.Faulkner Haynes, Inc.

REPRESENTING THE FOLLOWING QUALITY PRODUCTS:

ACCUTROL• Critical Environment Airflow

Control Valves• Airflow Measurement

ACTIVE AIR SOLUTIONS• Bi-Polar Ionization

AUTOMATIC AIRFLOW BALANCING• Automatic Balancing Valves for

Constant Airflow Regulation

BOSCH/FLORIDA HEAT PUMP• Water Source Heat Pumps (WSHP)• Semi-Custom Air Handlers

BUFFALO AIR HANDLING• Custom Air Handlers

CAMBRIDGE ENGINEERING• Energy Efficient Direct-Fired Blow

through Space Heaters• Make-up Air Units

CAPTIVE AIRE• Dedicated Outdoor Air Units

(DOAS) • Kitchen Hood Exhaust Systems

DANFOSS• Variable Frequency Drives

DESERT AIRE• Swimming Pool and Industrial

Dehumidifiers • Dedicated Outdoor Air Units

(DOAS)

EBTRON• Airflow Measurement and Control• Sensors• Occupancy Counters

ENERGY WALL• Modular, High-Efficiency Fixed

Plated Core ERVs

FILTRATION GROUP• Filters (MERV, HEPA, Gas Phase)• Filter Housings

FRIEDRICH• Room Air Conditioning• PTACs• VTACs• VRP with Inverter Driven

Compressors

HAMLIN SHEET METAL• Spiral Round• Flat Oval• Rectangular

HONEYWELL ANALYTICS• Gas Monitoring Systems

HUNTER INDUSTRIAL• High Volume Low Speed (HVLS)

Fans

INSUL-PIPE SYSTEMS• Pre-Insulated and Pre-Fabricated

Underground Piping Systems

LENNOX• Rooftop Units and Split Systems

up to 50 tons

LG• Variable Refrigerant Flow (VRF)

Systems• Mini-splits• Dedicated Outdoor Air Systems

(DOAS)• Controls

LIEBERT BY VERTIV• Computer Room A/C• UPS• Surge Suppressors• IT Infrastructure

MASON INDUSTRIES• Vibration Isolation• Floating Floors• Seismic Restraint

MONOXIVENT• Vehicle Exhaust Systems• FRP Underground Duct• Source Capture Fume Arms

NEPTRONIC• Actuators• Actuated Valves• Humidifiers• Controls• Electric Heaters

PENNBARRY• Ceiling Exhaust Fans• Energy Recovery Units

POTTORFF• Fire/Smoke/Control Dampers• Louvers

PRIHODA• Fabric Ductwork• Diffuser Systems

RAYWALL• Electric Heating Products by TPI

STERLING HEATERS• Specialty Ventilation

SWEGON• ERVs and DOAS with Integration

to VRF• VAV Chilled Beams

SYSTEMAIR• Specialty Ventilation

THERMADUCT• Pre-Engineered and Pre-Insulated

Outdoor Ducting Systems

THERMOLEC• Electric Duct Heaters

TITUS• Displacement Ventilation• Chilled Beams• Grilles• Diffusers• Terminal Units• VAV Diffusers• Fan Coils• Air Handling Units

TWIN CITY• Fans and Blowers

VIBRO-ACOUSTICS• Sound Attenuators

YOUNG REGULATORS• Dampers Regulators• Controls

Documents

STOCK 2019 - Faulkner Haynes...May 17, 2019 · Faulkner Haynes, Inc. is a sales driven company, however service is our final product. Faulkner Haynes is a manufacturer’s representative