ST-680 - Installation Manual - Eng

ST680 Series

SOCATECHNOLOGY CO., LTD.COPYRIGHT 2006 NOVEMBER

NETWORK PROXIMITYACCESS CONTROL OPERATION

AND INSTALLATION MANUAL

R

CONTENTS

1. Features Introductions

2. Reader Front panel & types of proximity card

3. Operation instructions

Start reader

Mode inquiry

Antiduress

Setup mode

4. Quick setting

5. Setup mode function selection instructions (00~28)

3

4

5

5

5

5

5

6

6

6. Installation instructions

7. Hardware specifications

8. Attentions

9. TROUBLESHOOTING

(01) Add new card

(02) Delete card

(04) Shunt time

(05) Open door mode

(07) Reset to release alarm

(08) Change system password

(09) Reset to release antiduress alarm

(10) Reader ID number

(11) Password error times

(12) Antiduress code

(13) Total cards

(14) Program version

(15) Set time

(16) Set date

(17) Auto record range

(18) Main reader location

(19) Door shutting time

(20) Alarm mode

(21) Antiduress alarm mode

(22) Door sensing mode

(23) Antitheft sensing mode

(24) Push button door open sensing mode

(25) BEEP sound mode

(26) Print mode

(27) Antipass mode

(28)Display card number mode

(00) Instand door open

(90) Historical Data Inquiry

Reader connector

Wiring connection for additional electric lock and push button door open switch

Wiring connection for additional magnetic door sensing

Wiring connection for antitheft sensing (NO Type)

Wiring connection for additional alarm

Wiring connection for linking with computer

20

20

20

21

21

22

23

24

24

24

ST680 OPERATION INSTRUCTIONS

1. Features introductions

When connecting with computer, it can be used for data inquiry and function setting

simutaneously.(Door open/close,start a larm system,etc).I t can also operate solely to

manage access control.

Function setting can be done by computer or reader itself.(Single registration or

deletion,door open time,etc).

The capacity data input/output can reach up to 6,000 by single reader operation.When

linking with computer,its data input/output capacity can be unlimited.

Main reader has 9,000 card regis trations capability.Each card can be selfsetting for

personal password and effective in/out time.

Main reader has 48 units of time zone.Each time zone unit also has 5 time ranges for

selfsett ing by user.

Example:It can be set from"G" hour "H" minute to "I" hour "J" minute on every

Mondays,Wednesdays,Saturdays in periodic of "A" year "B" month "C"

day to"D" year "E" month "F" day as effective in/out time range.

Directly link to series type printer for direct data printing.

Additional subreader for in/out control .

Equipped with hardware selftesting function.

Internal batteries wil l provide power supply when power cut occurred to prevent any

data from being erased and system time can operate as normal.

Main reader access control's range:

Main reader's sensing range:

Card number

Password

Time zone

Special holidays

Error control

Antipass

Antitamper

Antitheft

Illegal door open

It must be registered before use.

Personal password has to key in to open the door.

Setting the effective of year,month,day,time range,Monday~Sunday.

User could set any holidays as to prevent any unauthorized access.

A larm will actvate when"N" times of consecutive error password

entering occurred.

The card could only be used for matching single entry and exit.

(Otherwise,it will be considered the card has been duplicated

causing access denial.)

When the reader is tampered,alarm will be activated.

Alarm will be activated when sensing any abnormal operations.

Alarm will be activated when door is destroyed and opened by force.

3

Antiduress

Exceed door shut time Alarm will be activated,when door is not closed exceeding intial

time sett ing control.

Door open button sensing Door will open immediately when the button is pushed.

It will operate when password and duress code are keyes in to send help

signal to the nearest police station.It must be done manually to disable

antiduress function.

2. Reader Front Panel & Types of Proximity Card

(a) Front Panel Indicator Lights

(b) 10 entry (button),two function keys : "#"&" ".

(c) Types of prox imity card

(1). POWER (red)

(2). OK (green)

(3). DENY (yellow)

(4). STATUS (yellow)

# key : input data confirm key (Enter)

key : clear or escape key (CLR/ESC)

: power indicator.

: door open indicator.

: operation error or unregis tered card indicator.

: system starts and setup mode indicator.

12345678

4

SC10 : Thin card , thickness 0.8 mm, ISO standardcard dimensions. It can be printed directlyfrom card printer. Read rangeEM 125KHz 10 15cm, Mifare 13.56MHz 3 7cm.

SC20 : Thick card , thickness 1.8 mm, ISO standardcard dimensions. Read rangeEM 125KHz 10 20cm

SC30 : Key tag, dimensions: 5.5L X 7.5H X 3.2W (mm).Ultrasonic connection, waterproof,shock proof. Read rangeEM 125KHz 6 10cm,Mifare 13.56MHz 1.5 4cm

3. Operation instructions

Start reader:It will begin selftesting function when power is switched on.Its operation

procedures are as follow:

LCD DISPLAY

SRAM TESTING

RTC TESTING

INITIAL FUNCTION

08:05

0010

INSTRUCTIONS

Memory tesying

Real time clock teseing

Init ial system setting

Model (ST680),present time (08:05),10 registrations.

Note:Card must not exceed the read range (refer to different models) to

gain induction.

a).OK (green) light is on to indicate registered card to gain access.

b).DENY (yellow) light is on and consecutive beeping sound is on to

indicate unregistered card or used under unauthorized time zone.

(Please refer to troubleshooting if neither of above statuses occurred)

Mode inquiry:Press , LCD will display: MD ADR YYYY/MM/DD2 001 1999 / 01 / 01

MD

ADR YYYY/MM/DD

: open door mode (2 shows door open by proximity card

sensing, 3 shows door open by proximity card sensing with

password.)

: main reader number. : current date.

Repress to escape.

Antiduress:When under duress, usermay press button before keyingin password to activate alarm.(Duress code presetting is, it can be changed by user)

Example : antiduress code is , password is ,then to activate antiduress alarm, the user should key in

.

Setup Mode:

SYSTEM FUNCTIONS SELECTION : _ _

User must get into setting mode first beforechanging any system functions. User mustkey in for systemfunction selection. is beingset initially by manufacturer.(Example: User can get into the set up modeby keying ).

system passwordSystem password

5

4. Quick setup:

5. SETTING MODES & FUNCTIONS

User will get into the setup mode as the right diagram shown for any setting

to be made.

(A) Add new card , key in then key in .

(B) Delete card, key in then key in .

(C) Door open time, key in then key in the seconds .

(D) Change reader number, key in then key in the reader number .

(E) Door open mode, key in then key in the mode code .

(F) Time setting, key in then key in the time .

(G) Date setting, key in then key in .

Note: (1)Sunday (2)Monday (3)Tuesday (4)Wednesday (5)Thursday (6)Friday

(7)Saturday

(H) Release alarm, key in , confirmed then press .

( I ) Release antiduress alarm, key in , confirmed then press .

8dig it card number

8digit card number

13:00:15

2000/01/01 (6)

FUNCTION (01) Add new card:

Either key in 8digit card number or use proximity card to register, both can beaccepted but should be registered prior using.

key in#system password# Key in 01

Key in # or

Key in the # or

Go into function 01.

Queuing 8dig it card number inputkey in manual ly or by proximity.

Registra tion successfulbeep sound occurred .

Registration repeated,beepsound on continuously.

back to system function selection.

Esc system function select ion.

SYSTEM FUNCTIONSELECTION : _ _

ADD ONE CARD_ _ _ _ _ _ _ _

ADD ONE CARD00000001

ADD ONE CARDACCESS DENIAL

Go into system function setup.sta tus loght on,displayfunction selection.

6

Function (02) Delete card:

Deletion of user's card (such as loss of card or to prevent specific user to gain

access) can be achieved by keying 8digit card number indicated on the

proximity card.

key in#system password#


Key in 02

Key in 04

Key in # or

Key in # or

Key in the # or

Key in the # or





Deletion successful,abeep sound occurred .

Deletion successful,abeep sound occurred .

NO such card,beepsound on continuously.

NO such card,beepsound on continuously.



Esc sys tem function selection.




DELETE ONE CARD_ _ _ _ _ _ _ _

SET SHUNT TIME(1255):003_ _ _

SET SHUNT TIME(1255):003 000

SET SHUNT TIME(1255):003 005

DELETE ONE CARD00000001

DELETE ONE CARDACCESS DENIAL

Go into system function setup.


sta tus light on,displayfunction selection.


Function (04) Shunt time:

Setting of relay's ON/OFF time in the proximity reader can be set from 01255

seconds. (presetting time is 003 )

7

Function (05) Door open mode:

Reader has 2 types of identification modes. (presetting figure is 002)

Card proximity door opening: The door will be opened, when the card

is sensed.

Door open by proximity card and password: The door will be opened

by keying additional 4digit password after sensing the registered

card.

Mode (2).

Mode (3).



Key in 05

Key in 07

Key in # or

Key in # or

Key in the # or

Press other keys



Queuing the identificationmode input.

Queuing the alarm inputis reset or not.

Wrong input beepsound on continuously.

Setting successfully,ala rm is released.

Setting successful ly,beep sound occurred.







ALARM RELEASEDYES => "#"

Key in the #





Function (07) Reset to release alarm:

User sets to release the alarm.

IDENTIFICATIONMODE (23) :2



8

Function (08) Change system password:

The reader's password is being set at initially by manufacturer.In order to enter into system setting mode for the first time, user mustkey in the initial system password . User may change the systempassword after entering into system setting mode.


Key in # or

Key in the # or

Go into func tion 08.Queuing new systempassword input.

Input successfully (4 digits).

Error input.

Esc system function selection.

Esc system function selecti on.


Go into system function setup.sta tus light on,d isplayfunction selection.

INPUT NEW SYSTEMPASSWORD : _ _ _ _

CONFIRM SYSTEMPASSWORD : _ _ _ _

CONFIRM SYSTEMPASSWORD : 0000

CONFIRM SYSTEMPASSWORD : 1234

INPUT NEW SYSTEMPASSWORD : 1234

INPUT NEW SYSTEMPASSWORD : _12#

Beep sound on consecutively,error input.(first last 4digit password different) Reenter new system

password for confirmation.

Input successfully,(same password)

Function (09) Reset to release antiduress alarm:

User sets to release the antiduress alarm.


Key in # or

Press other keys

Go into function 09.Queuing for anti duressalarm released or not.

Setting successfully,antiduress a larm is released.




ALARM RELEASEDYES => "#"

Key in the #

Go into system function setup.sta tus light on,displayfunction selection.

9

Function (10) Reader ID number:

Each reader has a reader ID number for computer identification and the number

should not be repeated. (presetting figure is 001)



Key in 10

Key in 11

Key in # or

Key in # or

Key in the # or

Key in the # or

Go into func tion 10.

Go into func tion 11 .





Setting successfully,beep sound occurred.


back to system function selec tion.

back to system function selec tion.







sta tus light on,d isplayfunction selection.


READER ID NUMBER(1255) : 001 _ _ _

ERROR TIMES(1255) : 003 _ _ _

ERROR TIMES(1255) : 003 256

ERROR TIMES(1255) : 003 002

READER ID NUMBER(1255) : 001 256

READER ID NUMBER(1255) : 001 002

Function (11) Password error times:

Alarm will be activated when "N" times of consecutive error password entering

occurred. (presetting figure is 003)

10

Function (12) Antiduress code :

Set up of antiduress code ( , ). (presetting code is )




Key in 12

Key in 13

Key in 14

Key in # or

Key in # or

Key in # or




Queuing for antiduresscode input.

Display total number ofcurrent registered cards.

Display program version.

Setting successfully,beep sound occurred .










SET DURESS CODE09, : _

USER CARD COUNT0200

VERSION : V1.08

SET DURESS CODE09, : 9

Key in the # or

Press any key

Press any key







Function (13) Total cards:

Display total number of current registered cards.

Function (14) Program version:

Display program version.

11

Function (15) Set time:

Example: 18 hour 00 minute 00 second => 18:00:00 (presetting figure is

00:00:00)



Key in 10

Key in 16

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for systemtime input.

Queuing for systemdate input.

Wrong input, beepsound on continuously.














SET TIME17 : 50 : 50

SET DATA1999/01/01(5)

SET TIME17 : 50 : 99

SET DATA1999/03/29(0)

SET TIME18 : 00 : 00

SET DATA1999/03/29(1)

Function (16) Set date:

Example 2000/04/30 Sunday => 2000/04/30 (1) (presetting is 2000/01/01 (5))

12

Function (17) Auto Record range:

This is to set under what kind of status to save by stand alone operation.

(presetting figure is 003). There are 4 kinds of status to choose:

A. Detect point / output action. (+1) B. Computer special command. (+2)

C. Single reader operation status. (+4) D. User error status. (+8)

Example:

If A and B statuses are chosen, the setting figure for auto record range is 3 (1+2)

If A, B, and D statuses are chosen, the setting figure for auto record range

is 11 (1+2+8)



Key in 17

Key in 18

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for autorecord range input.

Queuing for main readerlocation input.















AUTO REC RANGE(1255) : 012 _ _ _

READER=>0/INDOOR1/OUTDOOR :1



AUTO REC RANGE(1255) : 012 256

AUTO REC RANGE(1255) : 012 011

Function (18) Main reader location:

To show the location of the reader: (0) Indoor, (1) outdoor. (presetting location

is 001)

13

Function (19) Door shutting time:

Time setting for sensing doorshutting time as to activate the alarm when

exceeding the set value. (presetting value is 030)



Key in 19

Key in 20

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for doorshuntting time input .

Queuing for alarmmode input.















DOOR SENSOR SEC(1255) : 030 _ _ _

ALARM MODE(0/ON,1/OFF) :1



DOOR SENSOR SEC(1255) : 030 256

DOOR SENSOR SEC(1255) : 030 015

Function (20) Alarm mode:

(0)shows "ON",(1) shows "OFF ". (presetting figure is 000)

Once set at "OFF" , alarm will not function.

14

Function (21) Antiduress alarm mode:

(0) shows "ON" ,(1) shows "OFF", (presetting figure is 000). Once set at

"OFF", antiduress alarm will not funct ion.



Key in 21

Key in 22

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for antiduress mode input.

Queuing for doorsensing mode input.















ANTIDURESS MODE(0/ON,1/OFF) :1

DOOR SENSOR MODE(0/ON,1/OFF) :0





Function (22): Door sensing mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 000). Once set at "OFF",

the sensing mode will not function at any abnormal door opening.

15

Function (23) Antitheft sensing mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 000). Once set at

"OFF", the sensing mode will not funct ion at any cases of broken in.



Key in 23

Key in 24

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for antitheft mode input.

Queuing for push buttonswitch mode input.















ANTITHEFT MODE(0/ON,1/OFF) :0

PUSH BUTTON MODE(0/ON,1/OFF) :0


PUSH BUTTONMODE(0/ON,1/OFF) :2


PUSH BUTTONMODE(0/ON,1/OFF) :1

Function (24) Push button door opening sensing mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 000). Once set at

"OFF', the sensing mode will not function if the push button is pressed.

16

Function (25) BEEP sound mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 000). Once set at "OFF"

, the BEEP sound will not function.



Key in 25

Key in 26

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for BEEPsound mode input.

Queuing for BEEPsound mode input.















BEEP MODE(0/ON,1/OFF) :0






Function (26) Print mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 001) Once set at "ON",

stored data can be printed out immediately.

17

Function (27) Antipass mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 001) Once set at "ON"

, the card could only be used for matching single entry and exit. This is to

prevent double entry by using the same card if card has been duplicated.



Key in 27

Key in 28

Key in # or

Key in # or

Key in the # or

Key in the # or



Queuing for antipass mode input.

Queuing for d isplay cardunmber mode input.















ANTIPASS MODE(0/ON,1/OFF) :1

D ISPLAY USER ID(0/ON,1/OFF) :0





Function (28) Display card number mode:

(0) shows "ON", (1) shows "OFF". (presetting figure is 000). Once set at "OFF",

LCD will not display the card number.

18

Function (00) Instant door open:

Authorized personnel could get into the setup mode to open the door when any

emergency cases happened.



Key in 00

Key in 90

Key in

Date Time

0001 12345678 17

04/01/01 16:30

OPEN DOORYES = > " # "

Key in # or

Key in # or



Queuing for dooropen input.







Key in the #

Press other key



status light on,displayfunction selection.

status light on,displayfunct ion selection.

Function (90) Historical Data Inquiry:

Inquiring historical data from standalone unit.

Press 1: Minus one 2: Add one 3: Minus 10 4: Add 10 5: MiddleState:01 Enter 06 Push Button Door Open02 Exit 17 Invalid Card No.03 Reader has already been taken apart 24 System Door Open

19

6. Reader instal lation instructions

(1)Reader connector

YellowPurpleBlueGreenBrownRed

PurpleBlueGreenBrownRed

PWMSub Reader connector 1.Sub Reader connector 2.Output power,positive 5VOutput power,negative GND

GNDAntiduress output terminal (low active)Door sensing terminal 2Door sensing terminal 1Antitheft sensing termina l (low active)Push button door open point terminal

PurpleBlueGreenYellowOrangeBrownBlackRed

Alarm Relay terminal N.O or N.CAlarm Relay terminal COMDoor open relay (N .O or N.C) terminalDoor open relay (Common) terminalSigna l (data) receiverSigna l (data+) transmitterInput power,negative GNDInput power,posit ive 12V

ST680 Wiring diagram

6 PINCONNECTOR

5 PIN CONNECTOR

8 PIN CONNECTOR 6 PIN CONNECTOR

Push butt on switch

Diode s white color termina l

Nude typeelectrica l lock

RS232/RS485 Swi tch

RS232 RS485

8 PINCONNECTOR

Note: (1) Door open relay electrical rating is 2A/24 VDC.

(2) Push button door open / door sensing / antitheft sensing all are

connection terminal. Any other power supplying is not al lowed.

(3) In order to avoid any disturbance of read range, user is advised to

use two separate adaptors.

(4) Related position of reader connector: Please refer to Appendix A.

(2) Wiring connection for additional electric lock and push button door open

switch.

As of different types of electric lock, the wiring methods are also different .

Overall, there are two types of wiring instructions as below:

(a) Fail secure :

Jump Adjustment(JP10)

R BK BR O Y G BL P R BR G BL P Y

AP10DC 12V

AP10DC 12V

A EL

- -N.O Output

20


6 PIN CONNECTOR

6 PIN CONNECTOR

6 PIN CONNECTOR

Push butt on switch

Diode s white color termina l

Electro Magnetic lock

(b) Fail safe :

Jump Adjustment(JP10)


AP10DC 12V

AP10DC 12V

- -N.C Output

Note:User must ensure the polarity (Diode) of the wiring connection for

additional electric lock is arranged correctly so that it is functional.

(3)Wiring connection for additional magnetic door sensing.

(a) N.O. type magnetic spring : (b) N.C. type magnetic spring :

R BR G BL P Y

R BR G BL P Y

R BR G BL P YN.O. type

magnet ic spring

N.O. type magnetic spring

N.C. type magnet ic spring

(4) Wiring connection for antitheft sensing. ( N.O. type )

21

(5) Wiring connection for additional alarm.

(a) Alarm :

(b) Antiduress alarm :

8 PIN CONNECTOR

Diode s whitecolor terminal

Diode s whitecolor te rminal Eternal Relay

Connection DC12V

Alarm powersupply DC12V

Alarm powersupply DC12V

Jump Adjustment(JP10) R BK BR O Y G BL P

N.C OutputN.O Output

+

-

Note User must ensure the polarity (Diode) of the wiring connection for

additional alarm is arranged correctly so that it is functional. User

must also ensure that Setting Mode (20) Alarm Mode is set ON.

:



K

ANO

NCCOM

Note User must ensure the polarity (Diode) of the wiring connection for

additional antiduress alarm is arranged correctly so that it is

functional. User must also ensure that Setting Mode (21) Anti

Duress Alarm Mode is set ON.

:

22

(6) Wiring connection for linking with computer

8 PIN CONNECTOR 8 PIN CONNECTOR 8 PIN CONNECTOR

R BK BR O Y G BL P R BK BR O Y G BL P R BK BR O Y G BL P

POWERTXDRXD

AP30 CONVERTERRS232 to RS485

RS232

RS485

RS232

+-

RS485 interface transit connector

PC

PC

RS232communication line

RS232commun ication line

8 PIN

RedBlackBrownOrangeYellowGreenBluePurple

1

2

3

4

5 9

8

7

6

23

7. HARDWARE SPECIFICATIONS

8. ATTENTIONS

9. TROUBLESHOOTING

Power supplyWorking enviromentLCDButtonsReal time clockRAMPower backup systemCommunication system

Output control system

Input sensinsystem

(A) Alarm output terminal can be connected with additional external alarm unit forsounding.

(B) Open door output terminal can be matching used with electric lock for accesscontrol.

(C) Antiduress output terminal can be connected with hidden alarm to send helpsignal to the nearest police station.

(A) Push button door open sensing point.Door wil l open instantly when button ispressed.

(B) Door status terminal can be connected with external magnetic spring for sensingif the door is closed or not.

(C) Antitheft sensing terminal can be connected with external magnetic spring forsensing if any appliances are closed or not.

(D) Antitamper sensing terminal used to sense if the reader is being tampered byforce.

DC 12V/1A,Adapter.Temperature 0 C6

0 C,Humidity 15%85%.16*2 STN LCD display with 4 LED's indicators.12 stainless steel buttons.Internal equipped with a Real Time Clock(RTC)IC.128 KB memory.Equipped with standby battery for saving if power is cut.Equipped intermally with RS485 interface.It can beexpanded to 255 terminals linking with computer operationsimultaneously.

1. Confirm the power supply voltage and polarly before installation to prevent anywrong connection that causedamage to the reader.

2. Use separate power supply to the electric lock and the proximity reader.3. Do not install the reader nearly any metal equiments or detector area to prevent

interference of read distance.4. Do not try to fix or modify the reader without authorized electrician.The reader is

guaranteed for one year.

1. Reader has no reaction or door does not open with proximity card.Solution: (1) Please check if the POWER light(red)is on.If not,p lease check the power

supply to run the reader on.(2) Please check if the proximity card is defected.User may use another proximity

card to test.(3) Please check if personal password is entered incorrectly or the user is still in

the setup mode.(4) Continuous proximity.Please remove the card from the reader and try again.(5) Check if the DENY light(yellow) is on and continuous beep sound occur. This

indicates the user's proximity card is not registered yet.(6) Please check if OK Light(green) is on and dooropening sound can be heard

at the same time.If door is still not opened,please ensure that if the wiring or

24

power supply of electric lock is instal led properly or broken.

2. System password is entered but user cannot enter into various function selection ofthe setting mode.

3. How to use antiduress setting?

Solution: (1) System password is entered incorrectly.Please check if the fol lwing step hasbeen entered correctly. # XXXX # .(XXXX represent system password),orpress button first and then enter the correct system password # 5678 # .

(2) Bad wiring arrangement may affect key enter data.Please confirm that thepower supply wire and the control wire have been arranged to the space at theback of the LCD (this is the wiring arrangement area of this unit).This is toprevent the wires pressing on the wiring on the PC board causing bad contact,short circuit and interference.

Solution: (1) Please change the door open mode to mode 3.Therefore,door will be openedonly by keying additional 4digi t password after sensing the registeredproximity card.

(2) When the door open mode is set,press antiduress code (user can preset theantiduress code)before entering 4digit password,thus the antiduress alarmwill be activated.

25

APPENDIX A

Installat ion Steps :Step 1,2Secure power supply wire and control wire through the base panel.Step 3 Fit the reader on the base panel (power supply wire and control wire

must first be inserted and the wires must be arranged correctly)Step 4 Use enclosed key wrench and screws to mount the reader up.

JP8

JP10 JP11

5 PIN

6 PIN 8 PIN

RS232/RS485 SWITCH

Related posit ion of reader connector :

26

Wiring diagram of ST680 and ST110ERB/ST120ERB

AP10DC 12V

R BK BR O Y GR BL P

8Pin

ST680

R BR GR BL P

GND

SP0

DATA0

SP1

DATA1

Wiegand input

ST680 5Pin

AP10DC 12V

ReaderST110ERB/ST120ERB

27

AP10DC 12V

1

2

3

4

5 9

8

7

6

Documents

ST-680 - Installation Manual - Eng