SQ 1 FINISH ROLLER - Square 1 Design

SQ-1 FINISH ROLLER

BR-SQ-FR-1710

• For use on Roof Trusses

• Final pressing of nail plates

• Heavy duty design

• Meets long term demand for continu-ous pressing of plates

• Produces at 119 feet per minute, alter-nate speeds are available

866-647-7771 [email protected] www.Square1Design.com

SIDE VIEW FRONT VIEW

PURPOSE

PROCEDURE • Activate start button

• Rolls will rotate for pressing nail plates

• Roof trusses or Jacks fed from build table

• Will feed trusses to be conveyed for stacking

• Emergency Shut-off on control panel

• Safety shut-off beams/bars or safety scanner located at the truss entrance and exit of the machine for safety

FOOTPRINT

Electrical Specifications

• Horsepower: 15 or 20

• Voltage: Amps

208 60 HZ 40.2

230 60 HZ 36.2

460 60 HZ 18

415 50 HZ 19.8

• E-stop with interlock

• Photo electric sensor e-stops, safety

bar, or safety scanner emergency

stop

• 20 HP motor upgrade

• Rapid change from 1 1/2” to 3 1/2” gap between rolls for floor trusses

• Soft start inverter

• Available in 10’, 12’, 14’, 15’ and 16’ lengths

• Roll height adjustment

• Customizations available

• Solid lubrication


Mechanical Specifications

• Speed: 119 FPM

• Operators Required: Continuous operation,

• Support: Phone

Onsite ($)

• Weight: 11,500 lbs

• Double row spherical roller bearings

• 24” roll diameter

• 4” stub shaft diameter

• 32” height to top of bottom roll

• Bottom roll height can be set at al-ternate dimensions at time of order

• #80 chain drive system

• Dual Motors

OPTIONS

SPECIFICATIONS


• Dual motors allows the machine to continue operation upon a motor failure, often al-lowing 90% of normal operations to occur

• Dual motors provides a shorter stopping distance in the event of hazardous situation

• All subcomponents may be sourced locally to ensure minimal downtime

• Customizations available

ADDITIONAL REASONS

TO PURCHASE

Documents

SQ 1 FINISH ROLLER - Square 1 Design