SPUDWEB TECHNOLOGIES PVT LTD

WELD VOLUME AND COST CALCULATOR

SPUWELDWELD VOLUME AND COST CALCULATOR

Drawing inCAD – HRSDRAWING – DAYS

TIME

SPUWELD –WELD SOFTWARE - MINUTES

PRESENT SCENARIO for Weld Volume And Cost Calculator

• Engineer takes each drawing and calculates the weld requirement takes about one to two hours• Arriving at Bill of Material (BOM) takes one hour.•Total estimation typically takes 7 to 8 hours. Depending upon the complexity •Recreating the data in the excel sheet after the manual mapping and verification

SCENARIO with SPUWELD

• Weld Volume And Cost Calculation takes less than 5 minutes.• Interactive screens for ease of flow.• Bill of Material (BOM) and Costing of the vessel within 5 minute• Drawing to Weld Volume Estimation done within 5 minute.

SAVING PRECIOUS TIME - HOURS TO MINUTES

SPUWELD– WELD VOLUME AND COST CALCULATOR

SPUWELD – INPUT SHEET

• It is important to note that only .dwg drawings can be chosen.• It is also important the symbols used in the drawing needs to be

replaced with the default local templates that are available in the DB.

SPUWELD – OUTPUT SHEET

SPUWELD – ADMIN

• Weld Output takes you to the stored location of the files

• We can add a new symbol which is not available in the database

• We can also edit the existing symbol in the database

• We can also view the same

• Admin – has the options to set the user with the options like the editing the symbol, formulaes and other options as well.

SPUWELD – EDIT SYMBOL

• On clicking the edit symbol as shown in the previous screens , it opens the dialog box as shown above.

• We can make the necessary changes like attribute and we can also check the same by evaluating the expression.

• We can then save the same which may be used for the future transactions.

SPUWELD – ADMIN

• As shown above the user can be set the privileges which allows him / her to use the software as desired.

• You can allow the add, edit or view symbols , parse the drawing and also define the admin functions for the user.

SPUWELD – ADMIN

• In the first screen if we choose the welding calculator model, we can select the type of welding process like SMAW, GMAW or SAW.

• Select the welding process.

SMAW GMAW GTAW

SPUWELD – ADMIN

After selecting the welding process we can select the type of the weld preparation to be carried out in this regard. We can enlisted some of the major types which may be expanded on the custom requirement in this regard,

SPUWELD – ADMIN

After the selection of the welding process and weld preparation is selected we can get the block showing the typical diagram for the ease of the understanding also relating to the dimensions to be keyed for the weld volume calculation.

SPUWELD – OUTPUT SHEET

SPUWELD – OUTPUT SHEET

• Drawing to BOM and Weld Volume And Cost Calculation in less than 5 minutes.

• Precious time saved more than 4 man-hours per drawing.• Increases productivity complimenting project completion in time.• Helps in costing of Weld Volume to detail.

• Software architecture developed on robust platform.• Being used in Design of Metallic Bellows, Pressure Vessels Specific to

Water Treatment and Others.

SPUWELD – BENEFITS

CONTACT

SPUDWEB TECHNOLOGIES PVT LTD# 43/18, Ground Floor, Gandhi Nagar,3rd Main Road, Adyar,Chennai - 600 020  TN, INDIA  Tel: +91 44 4266-6364 Email: info@spudweb.co.inOur blog: http://apps.spudweb.co.in/blogs/

www.spudweb.co.in