Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
solarspan®
Leaders in Thermal & Architectural Building Solutions
Technical Drawings v2 - Current 20/08/2018
2 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Contents
Panel Detail - SOL13-PR01-1.............................................................. 3
Barge Capping Detail - SOL13-BC01-1 ............................................... 4
Barge/Parapet Detail - SOL13-BC02-1 ................................................ 5
Head Flashing Detail - SOL13-HF01-2 ................................................ 6
Ridge Detail - SOL13-RD03-3 ............................................................. 7
Insulated Box Gutter Detail - SOL13-RD05-1 ...................................... 8
Roof Expansion Joint - SOL13-RJ01-3 ................................................ 9
Insulated Valley Box Gutter - SOL13-RV01-1 ..................................... 10
Eaves Gutter Detail ‘1’ - SOL13-WC03-2 ........................................... 11
Eaves Gutter Detail ‘2’ - SOL13-WC04-2 ........................................... 12
3
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Panel Detail - SOL13-PR01-1
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSPR01
PANEL DETAIL
1
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
4 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Barge Capping Detail - SOL13-BC01-1
ANGLE BRACKETTO FIX WALL PANEL
COLORBOND CAPPINGFIXED TO WALL PANEL
INSULATEDSOLARSPAN ROOF
CLEAT &STRUCTURALSTEEL
PURLINS
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER ENGINEER FORASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSBC01
BARGE CAPPING DETAIL
IND.ROOFING & CLADDING 1
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
5
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Barge/Parapet Detail - SOL13-BC02-1
14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER TO ENGINEERFOR ASSESSMENT.
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSBC02
BARGE / PARAPET DETAIL
IND.ROOFING & CLADDING 1
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
6 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Head Flashing Detail - SOL13-HF01-2
PROFILED FILLERSEALED TOP AND
BOTTOM IF REQUIRED
TURN UP ROOF PANSTO FULL RIB HEIGHT
(SPECIAL TOOLAVAILABLE)
FOAM SEAL IFREQUIRED
ROOF HEAD FLASHING
PROFILED FILLERSEALED TOP AND
BOTTOM IF REQUIRED
2° MINIMUM PITCH.
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAYBE REQUIRED, REFERENGINEER FOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSHF01
HEAD FLASHING DETAIL
IND.ROOFING & CLADDING 2
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
7
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Ridge Detail - SOL13-RD03-3
2° MINIMUM PITCH.
COLORBOND RIDGECAPPING
TURN UP PANS TO FULLRIB HEIGHT
14g TEK SCREWS TOEVERY RIB. ADDITIONAL
FIXINGS MAY BEREQUIRED, REFER
ENGINEER FORASSESSMENT
ROOF SUPPORTSTRUCTURE.
SOLARSPANROOF
CYCLONE WASHER (OPTION FORCYCLONIC REGIONS)
COLORBONDCOVERFLASHING
MINERAL WOOLOR FIBRE INFILL
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSRD03
RIDGE DETAIL
IND.ROOFING & CLADDING 3
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
8 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Insulated Box Gutter Detail - SOL13-RD05-1
2° MINIMUM PITCH.
BOX GUTTER(INDEPENDENTLYSUPPORTED)
OVERFLOWSPITTERS / SPIGOT
6x4mm BUTYLRUBBER
COLORBOND "Z"FLASHING
14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE
REQUIRED, REFER ENGINEERFOR ASSESSMENT
INSULATED SOLARSPANROOF ROOF PANEL "CUTBACKS" CARRIED OUTON SITE.
50mm INSULATEDPANEL
CONCRETE PARAPETWALL
PARAPET AND COVERFLASHINGS
ROOF SUPPORTSTRUCTURE
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSRD05
INSULATED BOX GUTTER DETAIL
IND.ROOFING & CLADDING 1
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
9
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Roof Expansion Joint - SOL13-RJ01-3
INSULATEDSOLARSPANROOF
TURN UP PAN TO FULL RIBHEIGHT (SPECIAL TOOLAVAILABLE)
TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)
COLORBONDFLASHING
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE
REQUIRED, REFER ENGINEERFOR ASSESSMENT
2° MINIMUM PITCH.
ROOF SUPPORTSTRUCTURE
MINERAL WOOL INFILL(IF REQUIRED) COLORBOND TRIM
FLASHING (IF REQUIRED)14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER ENGINEERFOR ASSESSMENT
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSRJ01
ROOF EXPANSION JOINT
COMMERCIAL / DOMESTIC ROOFING 3
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
10 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Insulated Valley Box Gutter - SOL13-RV01-1
BOX GUTTER DIMENSIONS AS REQUIRED
BOX GUTTER SUPPORT
TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)
ROOF SUPPORTSTRUCTURE
14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE REQUIRED,
REFER ENGINEER FOR ASSESSMENT
SILICONE SEALANTEACH SIDE
2° MINIMUM PITCH.2° MINIMUM PITCH.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSRV01
INSULATED VALLEY BOXED GUTTER
COMMERCIAL / DOMESTIC ROOFING 1
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
11
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Eaves Gutter Detail ‘1’ - SOL13-WC03-2
"Z" FLASHING TO SEALCORE IF REQUIRED.
FASTEN GUTTER BRACKETTHROUGH PANEL WITH BOLT
WASHER AND NUT ASSEMBLY
EAVES GUTTER
ROOF PANEL CUT BACKS CARRIED OUT ON SITE.
SOLARSPANINSULATED ROOF
2° MINIMUM PITCH.
ROOF SUPPORTSTRUCTURE
14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAY
BE REQUIRED, REFERENGINEER FOR ASSESSMENT.
4mmALUMINIUMRIVETS@300CRS(TYP)
TURN DOWN PANAPPROX 20° (SPECIAL
TOOL AVAILABLE)
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSWC03
EAVES GUTTER DETAIL 1
IND. ROOFING & CLADDING 2
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
12 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
Eaves Gutter Detail ‘2’ - SOL13-WC04-2
"Z" FLASHING TO SEALCORE IF REQUIRED
SOLARSPANINSULATED ROOF
14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAY
BE REQUIRED, REFERENGINEER FOR ASSESSMENT.
2° MINIMUM PITCH.
ROOF SUPPORTSTRUCTURE
4mm ALUMINIUMRIVETS @300CRS (TYP)
EAVES GUTTER
ROOF PANEL CUT BACKS CARRIED OUT ON SITE.
TURN DOWN PANAPPROX 20° (SPECIAL
TOOL AVAILABLE)
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
SOL13-
Description
Title
06.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
SOLARSPAN - ROOFING
NTSWC04
EAVES GUTTER DETAIL 2
IND. ROOFING & CLADDING 2
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
13
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
14 SolarSpan® - Technical Drawings v2 - Current 20/08/2018
Standard Constructionsolarspan®
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
15
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
SolarSpan® - Technical Drawings v1 - Current 20/08/2018
Standard Constructionsolarspan®
www.bondor.com.au
1300 300 099
BRISBANE/EXPORT 103 Ingram Road Acacia Ridge QLD 4110 Ph: (07) 3323 8500 Fax: (07) 3323 8501
PERTH 17 Gauge Circuit Canning Vale WA 6155 Ph: (08) 9256 0600 Fax: (08) 9256 0620
ADELAIDE 70-72 Rundle Road Salisbury South SA 5106
Ph: (08) 8282 5000 Fax: (08) 8282 5099
MELBOURNE 329A St Albans Road Sunshine VIC 3020 Ph: (03) 8326 8000 Fax: (03) 8326 8099
LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249
Ph: (03) 6335 8500 Fax: (03) 6335 8544
SYDNEY 49-53 Newton Road Wetherill Park NSW 2164
Ph: (02) 9609 0888 Fax: (02) 9729 1114
Leaders in Thermal & Architectural Building Solutions
** Limited availability. ^ Darker colours warranted for use in limited regions. Metecno Pty Limited. ABN 44 096 402 934. The manufacturer reserves the right to change the specification without notice. Bondor®, LuxeWall®, MetecnoInspire®, Equitilt®, BondorPanel®, FlameGuard®, MetecnoPanel®, EconoClad®, MetecnoKasset®, InsulWall®, LuxeWall®, DesignerWall®, SolarSpan®, InsulRoof®, MetecnoSpan®, Purline®, Equideck®, InsulLiving®, EconoClad®, Metecno are trademarks of Metecno Pty Limited. BlueScope, Colorbond®, Permagard® and colour names are trademarks of BlueScope Steel Limited. Microban® is a registered trade mark of the Microban Products Company. The colours shown in this publication have been reproduced to represent actual product colours as accurately as possible. However, given printing limitations, we recommend checking your chosen colour against an actual sample before placing orders. This advice is of a general nature only. Designers must provide for adequate structural performance and other Building Code requirements. This information is subject to change. Refer to Bondor® website for latest version. Consult Bondor® for your application. BON0535 Drawing Pack - SolarSpan v2 20/08/2018