Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
1.98 hrs
1 pcs
f
0.30 mm
k
0.40 mm
h
1
41.00 g
d
MK3/S
Summary
Since the corona virus outbreak I have placed soap dishes at every sink inour household.
But why yet another soap dish design?
This one is modeled 100% PrusaSlicer. Both posing as a showcase for whatcan be done with all of its great features and being super easy to modifyand adapt.
It is using zero infill volumes. This gives you perfect perimeter only wallswithout any mushed infill between. The mesh the soap is resting on isusing actual infill for its pattern. This means you can finally show everyonewhat you and your prints are made out of! Are you a Stars, triangle or agood old grid person?
Household > Bathroom
washing soaptray soapholder soapdish soap sink
kitchen covid19 covid corona bathroom
C Christoph
Soap dish modeledin PrusaSlicer
VIEW IN BROWSER
updated 28. 3. 2020 | published 28. 3. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
277.0 KB
1.98 hrs f 0.30 mm k 0.40 mm h PLA 40.80 g d MK3/S
updated 28. 3. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
33.4 KBupdated 28. 3. 2020
It is fairly easy to print. You can easily change any settings if youencounter any problems. Just honor the following things:
Use PrusaSlicer 2.2 or aboveDisable “Only retract when crossing perimeters”; all you see is infill,so it should be printed nicelyI have printed it with the part cooling fan completely off. It help withbed adhesion and it will give you a stronger part.
What to keep in mind when making changes
Print speed of the top solid infill layer is reduced for a nicer finishPrint speed of the mesh infill is reduced as well“Only infill where needed” and “Ensure vertical shell thickness“ aredisabled
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
• •
•
• • •
soap_dish_1h59m.gcode
soap_dish.3mf
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition