SN74LS145-D.pdf

Embed Size (px)

Citation preview

  • 8/11/2019 SN74LS145-D.pdf

    1/9

    Semiconductor Components Industries, LLC, 2001

    October, 2001 Rev. 7

    1 Publication Order Number:

    SN74LS145/D

    The SN74LS145, 1-of-10 Decoder/Driver, is designed to acceptBCD inputs and provide appropriate outputs to drive 10-digitincandescent displays. All outputs remain off for all invalid binaryinput conditions. It is designed for use as indicator/relay drivers or asan open-collector logic circuit driver. Each of the high breakdownoutput transistors will sink up to 80 mA of current. Typical powerdissipation is 35 mW. This device is fully compatible with all TTLfamilies.

    Low Power Version of 74145 Input Clamp Diodes Limit High Speed Termination Effects

    GUARANTEED OPERATING RANGES

    Symbol Parameter Min Typ Max UnitVCC Supply Voltage 4.75 5.0 5.25 V

    TA Operating AmbientTemperature Range

    0 25 70 C

    VOH Output Voltage High 15 V

    IOL Output Current Low 24 mA

    LOWPOWER

    SCHOTTKY

    SOICD SUFFIX

    CASE 751B

    PLASTICN SUFFIXCASE 648

    16

    1

    16

    1

    SOEIAJM SUFFIXCASE 966

    16

    1

    Device Package Shipping

    ORDERING INFORMATION

    SN74LS145N 16 Pin DIP 2000 Units/Box

    SN74LS145D SOIC16 38 Units/Rail

    SN74LS145DR2 SOIC16 2500/Tape & Reel

    SN74LS145M SOEIAJ16 See Note 1

    SN74LS145MEL SOEIAJ16

    1. For ordering information on the EIAJ version ofthe SOIC package, please contact your localON Semiconductor representative.

    See Note 1

    http://onsemi.com

  • 8/11/2019 SN74LS145-D.pdf

    2/9

    SN74LS145

    http://onsemi.com

    2

    CONNECTION DIAGRAM DIP (TOP VIEW)

    HIGH LOW

    (Note a)LOADING

    PIN NAMES

    VCC = PIN 16GND = PIN 8

    LOGIC SYMBOL

    P 0 P 1 P 2 P 3

    VCC

    Q0

    P 0 P 1 P 2 P 3 Q8Q9 Q7

    Q1 Q2 Q3 Q4 Q5 Q6 GND

  • 8/11/2019 SN74LS145-D.pdf

    3/9

    SN74LS145

    http://onsemi.com

    3

    LOGIC DIAGRAM

    INPUTS

    INPUTINVERTERS

    DECODE/DRIVERGATES

    OUTPUTS

    P 0 P1 P 2 P 3

    0 1 2 30 1 2 3

    Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9

    TRUTH TABLE

    INPUTS OUTPUTS

    P 3 P 2 P 1 P 0 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9

    L L L L L H H H H H H H H HL L L H H L H H H H H H H HL L H L H H L H H H H H H HL L H H H H H L H H H H H HL H L L H H H H L H H H H HL H L H H H H H H L H H H HL H H L H H H H H H L H H HL H H H H H H H H H H L H H

    H L L L H H H H H H H H L HH L L H H H H H H H H H H LH L H L H H H H H H H H H HH L H H H H H H H H H H H HH H L L H H H H H H H H H HH H L H H H H H H H H H H HH H H L H H H H H H H H H HH H H H H H H H H H H H H H

    H = HIGH Voltage LevelL = LOW Voltage Level

  • 8/11/2019 SN74LS145-D.pdf

    4/9

    SN74LS145

    http://onsemi.com

    4

    DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)

    Limits

    Symbol Parameter Min Typ Max Unit Test Conditions

    VIH Input HIGH Voltage 2.0 VGuaranteed Input HIGH Voltage forAll Inputs

    VIL Input LOW Voltage0.8

    VGuaranteed Input LOW Voltage forAll Inputs

    VIK Input Clamp Diode Voltage 0.65 1.5 V V CC = MIN, IIN = 18 mA

    IOH Output HIGH Current 250 A VCC = MIN, VOH = MAX

    0.25 0.4 V I OL = 12 mA V = V MINVOL Output LOW Voltage 0.35 0.5 V I OL = 24 mA

    = ,VIN = VIL or VIH

    2.3 3.0 V I OL = 80 mAper Truth Table

    p20 A VCC = MAX, VIN = 2.7 V

    IIH Input HIGH Current0.1 mA V CC = MAX, VIN = 7.0 V

    IIL Input LOW Current 0.4 mA V CC = MAX, VIN = 0.4 V

    ICC Power Supply Current 13 mA V CC = MAX, VIN = GND

    AC CHARACTERISTICS (TA = 25 C)

    Limits

    Symbol Parameter Min Typ Max Unit Test Conditions

    tPHLtPLH

    Propagation DelayP n Input to Q n Output

    5050 ns

    VCC = 5.0 VCL = 45 pF

    AC WAVEFORMS

    Figure 1. Figure 2.

    VIN

    VOUT

    1.3 V

    tPHL

    1.3 V

    1.3 V

    tPLH

    1.3 V

    VIN

    VOUT

    1.3 V

    tPHL

    1.3 V

    1.3 V

    tPLH

    1.3 V

  • 8/11/2019 SN74LS145-D.pdf

    5/9

    SN74LS145

    http://onsemi.com

    5

    PACKAGE DIMENSIONS

    N SUFFIXPLASTIC PACKAGE

    CASE 64808ISSUE R

    A

    B

    F C

    S

    HG

    D

    J

    L

    M

    16 PL

    K

    T

  • 8/11/2019 SN74LS145-D.pdf

    6/9

    SN74LS145

    http://onsemi.com

    6

    PACKAGE DIMENSIONS

    D SUFFIXPLASTIC SOIC PACKAGE

    CASE 751B05ISSUE J

    F

    JM

    R X 45

    G

    8 PLP B

    A

    T

    D

    K

    C

    16 PL

  • 8/11/2019 SN74LS145-D.pdf

    7/9

    SN74LS145

    http://onsemi.com

    7

    PACKAGE DIMENSIONS

    HE

    A1

    LEQ1

    M

    L

    DETAIL P

    VIEW P

    cA

    b

    e

    DZ

    E

    M SUFFIXSOEIAJ PACKAGE

    CASE 96601ISSUE O

  • 8/11/2019 SN74LS145-D.pdf

    8/9

    SN74LS145

    http://onsemi.com

    8

    ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changeswithout further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particularpurpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/orspecifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must bevalidated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicationsintended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a sit uation where personal injury ordeath may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and holdSCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonableattorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claimalleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

    PUBLICATION ORDERING INFORMATIONJAPAN : ON Semiconductor, Japan Customer Focus Center

    4321 NishiGotanda, Shinagawaku, Tokyo, Japan 1410031Phone : 81357402700Email : [email protected]

    ON Semiconductor Website : http://onsemi.com

    For additional information, please contact your localSales Representative.

    SN74LS145/D

    Literature Fulfillment :Literature Distribution Center for ON SemiconductorP.O. Box 5163, Denver, Colorado 80217 USAPhone : 3036752175 or 8003443860 Toll Free USA/CanadaFax : 3036752176 or 8003443867 Toll Free USA/CanadaEmail : [email protected]

    N. American Technical Support : 8002829855 Toll Free USA/Canada

  • 8/11/2019 SN74LS145-D.pdf

    9/9

    This datasheet has been download from:

    www.datasheetcatalog.com

    Datasheets for electronics components.

    http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/