Sliding Door Operator

CSL series automatic sliding door upholds the concept of European product design, Following the

structure of modern industry to provide you a perfect solution for the entrance. CSL series sliding

door operator combines all the advantages of the top sliding door technology who can offer you the

most professional sliding door system of the world.

Ps: Our Group CNBM (China National Building Material) who is the no.1 building material supplier in

China can also supply various of automatic revolving door and high quality interior & exterior steel &

wooden door as well as kinds of window product with high cost performance.

CSL-1 Sliding Door Operator

The main control unit of CSL-1 adopts advanced PHILIPS computer

control chip and fuzzy control technology which can measure the weight

and surrounding obstacles automatically, Accordingly, The unit will

calculate the appropriate parameter of the system to ensure perfect

operating. The system can achieve human - machine interaction,

security detection, error display and other functions.

1. Main Control Unit

The module-style driving circuit and DC permanent magnet servo motors as well DC chopper control

technology is used on the drive to ensure proper speed, low noise (noise in 40DB), stable operation

and free of maintenance. Insulation class: F class.

2. Drive Unit

The lock adopts loop detection style and flip-flop control mode to

shorten the power on time of the electromagnetic coil, That ensures not

only energy saving but also prolonged life span of the lock.

3. Electro-mechanical Lock

- 1 -

When power failure, The backup battery (24V DC) can support the door continuous operating for 30

minutes, If any emergency, the battery can open the electromechanical lock to ensure panic breakout.

4. Backup battery

BEA photocell, Maximum open door captured area is 5 meters.

5. Infrared photo cell (Safety beam)

SDC control panel is a two-lane data communication dedicated

remote controller (the substitute of hand held terminal) which can

be directly connected to the main control unit BUS, it can be used

within 50 meters:

* Program select

* Setting for system parameter

* Function Status indication

* Fault self-diagnosis

6. SDC control panel (Program selector)

The finished aluminum is used for

the guide rail which can meet the

standard of VDE700T.238, The high

strength nylon is attached to reduce

the noise.

7. Guide rail

- 2 -

■ Open Mode: 1. Sensor Open Mode The infrared sensor or microwave sensor can be adopted. The effective monitoring area is: Maximum

3m × 1.5 m, Minimum 1 m × 0.3 m.

2. Coded Lock Open Mode

Advanced code identification system is used to improve the security of the entrance.

3. Card Swiping Open Mode

4. Button Open Mode Elbow-touch, foot-touch and magic touch can be chose.

■ Function Description 1. Self-test Function

When first time initiating of the system, The door will self learning the weight, opening width and

other surrounding status to calculate the best opening speed, closing speed, accelerating time,

decelerating time, low speed distance etc. to place the door into an excellent working mode.

2. Automatic fault diagnosisThanks to the embedded fault display system, The operating status of the door can always be

monitored, If any abnormal of the working parts (especially the electrical components), The system

will indentify the problem automatically and indicates the error code on the SDC control panel.

3. Function selected

1) Control Function (Operating Mode)

* Manual

* Keep open

* Automatic

* Partial open

* One-way access

* Night security

2). Parameter adjusted function

* Reset - Back to the initial &#118 value;

* Opening Speed - Adjustment Range: 0.4 ~ 0.7m / s;

* Closing Speed - Adjustment Range: 0.3 ~ 0.6m / s;

* Partial Opening Width - Adjustment Range: 25 ~ 99%;

* Open Time for Maintenance- Adjustment Range: 0 ~ 10s.

- 3 -

3). Programmed Setting Function (31 items can be set), including:

* When the external power source fails, the door status will: Run / Open / Close;

* PSA panel is locked with a password: Option for Yes / No;

* Two-way door chain control: Option for Yes / No;

* Motor Direction: Positive Rotation / Reverse Selection; etc.

4. Instant reaction functionWhen the door wing hit the obstacle at the process of closing, The door will reverse open

automatically, The standard settings are four times of back and forth, the door wing won’t move to

fully open position and close softly until the fifth time and if there is still obstacle exist, The door will

indicate fault information and stop running.

■ Others * Centralized control and management for a series of doors.

* Emergency stop and panic breakout.

Technical Parameters

* Applied Voltage: 220V, 50Hz, Current: 5A * Rated Power: 100W * Maximum Power Consumption: 200W * Maximum Driving Force (Static): 300KG * Ambient Temperature: -25℃ ~ +75℃

* Relative Humidity: 65% Maximum * Maximum Clear Opening Width: 3000mm* Largest Load capacity: 100kg × 2 * Running Noise: ≤ 40db

- 4 -

CSL-1 Sliding Door Operator Component List

Item Content Quantity Brand Type and Specification

CNBM - CMAX

Length of operator:4300 -6100mmWidth of operator:165mmHeight of operator:200mm

1 set CMAX

ONE Control System

1 Motor 1 set Dunkermotoren 100W with position and speed feedback, PWM drive

2 Decelerator 1 set Dunkermotoren SG80K RTAIO

3 Control unit 1 set PHILIPS PHILIPS chip, Module design

4 Radar 2 sets BEA MW-6 Microwave/Infrared

5 Control Panel 1 set CNBM 50m wire control, with error display function

TWO Mechanical parts

1 Rail profile 1 set CNBM High strength, 5mm thickness

2 Durable rail 1 set CNBM Special nylon, durable, quiet and self-lubricated

3 Carriage wheel 4 sets CNBM Galvanized and adjustable

4 Belt clip 2 sets CNBM Galvanized

5 Drive timing belt 1 pcs CNBM Durable and anti-expanded

6 Reversed wheel 1 set CNBM Galvanized

7 Stopping device 4 pcs CNBM Galvanized, shock absorbing treatment

Three Optional Parts

1 Double motor drive device 1 set Dunkermotoren 100W with position and speed feedback, PWM drive

2 Safety beam 1 set BEA BCL Infrared

3 Control circuit of electromechanical lock 1 set Holland 24V Bi-static working mode

4 Control chip of backup battery 1 set CNBM 24V 30 min keep operating

capacity

- 5 -

Electrocircuit

- 6 -

Electrocircuit

- 7 -

CSL-2 Main control unit adopts original microprocessor control chip which imported from US, The all

intelligent control technology and scientific operating data as well as man-machine dialogue, safety

check and error display features ensures the system to process information more precisely and

promptly.

1. Main control Unit

CSL-2 series sliding door operator which designed and manufactured by CNBM is a type of heavy

sliding door operator which can hold up to 2X200KG weight of door wings.

3. Electromechanical Lock 4. Backup Battery

5. SDC Control Panel

CSL-2 Sliding Door Operator

- 8 -

6. Supporting Rail

* Applied Voltage: 220V, 50Hz, Current: 5A

* Rated Power: 100W

* Maximum Power Consumption: 100W

* Maximum Driving Force (Static): 400KG

* Ambient Temperature: -25℃ ~ +75℃

Technical Parameter

- 9 -

CNBM component list sliding door operator CSL-2Item Content Quantity Brand Type and Specification

CNBM - CMAXLength of operator: 4200 -6100mmWidth of operator: 195 mmHeight of operator: 200 mm

1 set CMAX

1 Supporting beam 1 pcs2 Rubber rail vibration isolator 1 pcs3 Guide rail 1 pcs4 Carriage wheel 4 sets5 Main control unit 1 set6 Detecting sensor 2 sets BEA7 voltage-stabilized source for drive unit 1 set2 Hardware package 1 setOptional Parts1 Electromechanical lock 1 set2 Backup battery 1 set

* Relative Humidity: 65% Maximum

* Maximum Clear Opening Width: 3000mm

* Largest Load of movable wing: 120kg × 2

* Running Noise: ≤ 30db

Electrocircuit

- 10 -

Add: 17th Floor, No.4 Building, Zhuyu Business Center,

Shouti South Road, Haidian District, Beijing 100048, China.

Tel: +86 10 68796508 Fax: +86 10 68796655

E-mail: dennislin@icnbm.com Mobil: +86 15011463411

Website: www.icnbm.com