Sistemas de Transmissão via Redes de Celular e IP

PHASE | VISLINK: Sistemas de Transmissão via Redes de Celular e IP

IPLink Digital Video/Data Microwave Systems…………………..p. 2

IPLink-SM Split Mount Indoor/Outdoor Microwave Systems…..p. 4

NewStream Multi-mode Van/OB Transmit System……………...p. 6

LGR-1000 LiveGear Receiver……………………...……………...p. 8

Key Features

■ All-indoor, space efficient 2RU x 19” (48cm) rack-mount ■ Ultra-high linear broadband RF power amplifiers ■ Exceptional System Gain Performance ■ High capacity ASI & Gigabit Ethernet IP data transport ■ Automatic Transmitter Power Control ■ Adaptive Code Modulation ■ User selectable modulations from QPSK to 256 QAM ■ ANSI and ETSI channel bandwidths ■ Intuitive Web-based GUI for monitoring/control

Typical Applications

■ Studio-to-Transmitter Links (STL) ■ Transmitter-to-Studio Links (TSL) ■ Inter-city Relay Backhauls (ICR) ■ Multi-hop Microwave Relay Systems ■ High-capacity IP Microwave Systems

IPLink combines the features of a broadcast digital microwave point-to-point radio system with the modern efficiencies of a high-capacity long-distance bi-directional IP microwave radio design. It allows the broadcaster to smoothly migrate from the traditional ASI transport platform to a future IP-centric system architecture.

The system delivers ultra-high linear RF output performance coupled with the reliability that LDPC forward error correction (FEC) affords in controlling errors in data transmissions over long or unreliable microwave paths.

A key advantage of the IPLink is that it allows BAS 7 & 13 GHz simplex links to be transformed into affordable duplex IP Ethernet microwave systems within a T/R channel spacing as close as 75 MHz; a Vislink first.

Systems are available in Simplex, Duplex, Hot-Standby and *Spatial Diversity Receive configurations.

*Seamless switching available for non-protected duplex space diversity receive system configurations only.

IPLinkNext Generation Digital Video/Data Microwave Systems

Phase Engenharia

Capa2

© 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to

change specifications without notice. Please contact your representative to confirm current specifications.

www.vislink.com • [email protected]

RD001881 Rev 2.411/02/16 ENG

SPECIFICATIONS

RF PARAMETERS

RF Power Output Level (prior to filter branching)

■ +34dBm to +27dBm* @ 6 GHz BAS

■ +33dBm to +26dBm @ 7 GHz ■ +32dBm to +25dBm @ 8 GHz ■ +29dBm to +22dBm @ 13 GHz BAS

* (Modulation dependent)

RF Band Support* ■ 6.425 – 7.125 GHz (FCC TV-BAS)

■ 7.100 – 7.900 GHz (ETSI) ■ 7.725 – 8.500 GHz (ETSI) ■ 12.700 – 13.250 GHz (FCC TV-BAS)

* Consult factory for additional RF band support

Channel Filter Branching Network Assemblies*

■ 50 MHz typ. T/T & R/R @ 7 & 13 GHz FCC-BAS

■ 75 MHz typ. T/R @ 7 & 13 GHz FCC-BAS

■ Waveguide Interface: WR137 @ 7 GHz, WR75 @ 13 GHz

* Consult factory for additional WG interface availability

DATA TRANSPORT PARAMETERS

Modulations ■ QPSK, 8PSK, 16 QAM, 32 QAM, 64 QAM, 128 QAM, 256 QAM

Data Throughput Capacity (one-way)

■ 10 Mbps to 360 Mbps

Automatic Transmitter Power Control (ATPC)

Adaptive Code Modulation (hitless 0ms)

Encryption ■ AES 256

PRIME POWER (MAINS) PARAMETERS

100W (power consumption) switching

■ AC (90-132V & 180-264V @ 47 – 63 Hz)

USER INTERFACE PARAMETERS

Ethernet (payload) ■ 2 x 100/1000 Base-T, RJ-45 ■ Gigabit Ethernet line rates scalable up to 360 Mbps

■ IPv4 and IPv6 ■ VLAN 802.1Q ■ 64 level DiffServ (DSCP) QoS or 8 level 802.1p in 4 prioritization queues with VLAN support

ASI (payload) ■ 4 x ASI simplex transmit (BNC-F)

■ 4 x ASI simplex receive (BNC-F)

■ 4 x ASI individually configured per direction for duplex (BNC-F)

Hot-Standby ASI Transmit Switch ■ 2 x 1 DA

Hot-Standby ASI Receive Switch ■ 2 x 1 A/B typ. 40 msec.

Hot-Standby Ethernet TCP/IP Switch

■ 600 - 1100 msec.

Local and Remote Link Web-browser Management

■ 1 x 100/1000 Base-T (RJ-45)

System Management Interface Parameters

■ Hot-Standby and Space Diversity (1+1)

■ 1x DB9 for Alarm Fault switching – RF PA, RSL, etc.

MECHANICAL PARAMETERS ■ Weight: 18 lbs. (8.2 kg) (approx)

■ 2 RU x 19” (48cm) EIA Rack Mount

■ 15.0” depth (38cm) exclusive of filter branching

ENVIRONMENTAL PARAMETERS

Operating to full specifications ■ 0 ˚ to +50˚ C (32˚ to 122˚ F) ■ Humidity up to 95% non-condensing

Operational ■ -10˚ to +60˚ C (14˚ to 140˚ F)

Storage ■ -40˚ to +70˚ C (-40˚ to +158˚F)

REGULATORY PARAMETERS ■ FCC Type Certification in accordance with CFR 47 Part, subpart J including:

■ CFR 47, Part 74, subpart J ■ CFR 47, Part 101, subparts C, H and I

■ FCC part 15 EMC unintentional emission radiators

■ ETSI; EN 301 489-1, 489-28, EN 302 064-1

■ Safety per EN/CE EN60950

LICENSE KEY UPGRADES: ■ IPLink-365-LIC

■ 200 Mbps to 360 Mbps data throughput license (per non-protected terminal)

IPLink-SMSplit-Mount Indoor/Outdoor Digital Video/Data Microwave Systems

The radio system is available for Ethernet only, Ethernetplus ASI or Ethernet plus E1/T1 applications with half-duplex data rates (payload) up to 360 Mbps and in 1+0,1+1 and 2+0 configurations.

The IPLink-SM supports a wide range of frequency bandsbetween 3.5 and 38 GHz for ETSI and FCC operation andcovers channel bandwidths from 3.5 to 56 MHz.

Key Features

■ Split-mount, space efficient 1RU x 19” (48cm)rack-mount IDU and tower mounted ODU (IP65 rated)


■ Studio-to-Transmitter Links (STL)■ Transmitter-to-Studio Links (TSL)■ Inter-city Relay Backhauls (ICR)■ Multi-hop Microwave Relay Systems■ High-capacity IP Microwave Systems

■ Standard & High RF linear broadband RF power outputs ■ Automatic Transmitter Power Control■ Adaptive Code Modulation■ User selectable modulations from QPSK to 256 QAM■ High capacity Gigabit Ethernet IP data transport■ Optional high stability ASI or multiple E1/T1 IDU versions■ Intuitive Web-based GUI for monitoring/control

IPLink-SM is a “split-mount” bi-directional point-to-point IPmicrowave system consisting of a tower mounted RF unit(ODU) and an indoor rack-mounted baseband Ethernetmodem (IDU). The ODU is powered via a low lossinterconnecting IF coaxial cable for distances up to 1000feet (300m). Mounting the RF ODU directly to, or in close proximity to the antenna maximizes system gain performance over that of an all-indoor system that incursthe transmission line loss associated with waveguide infrastructures.

SPECIFICATIONS

© 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by thetrademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to



NewStreamMulti-mode Van/OB Transmit System

THE NEWSTREAM ADVANTAGE: Cost effective, space saving and user-friendly multi-purpose Van/OB microwave transmission system.

■ Compact: Space-efficient 2RU x 19" EIA all-inclusive rack mount design for ENG, CNG and SNG control.

■ Operator-friendly: Ergonomic programmable multi-function OLED push button switches minimize front panel controller congestion.

■ Backwards Compatibility: Use existing ENG Nycoil Assemblies configured for Type ‘N,’ Triax connections.

■ Expandable: Purchase a NewStream system initially configured for ENG operation and then add CNG and/or SNG functionality at a later time.

■ Space Efficient ENG ODU: 2, 4, 7, 13, 2/7 GHz mast-mounted single enclosure with built-in RF coaxial relay for omni-directional antenna selection.

■ Broadband Cellular ODU: Lightweight mast or roof-mounted cellular ODU equipped with multiple bonded cellular modems and integral high-gain broadband cellular antennas.

■ HD/SD Broadcast Video Quality: User selectable MPEG-2 or H.264 (AVC) encoding available in 4:2:0 and 4:2:2 profiles.

■ CNG Encoding: H.264 AVC high-profile @ level 4.1 adaptive bit-rate coding (ABR) encoding.

■ SNG: DVB-S and DVB-S2 modulation with optional 10 MHz.

■ Video Inputs: Composite video & HD/SD-SDI.

■ Audio: Two embedded SDI MPEG-2 layer II and two Analog stereo pairs.

■ Future-proof: NewStream is based upon a software defined platform employing high capacity dual-core ARM® Cortex-A9™ FPGAs (field-programmable gate arrays) which allow for the future implementation of emerging communication technologies.

NewStream raises the bar as the most comprehensive mobile broadcast microwave transmission system available today. It combines both licensed and unlicensed RF technologies together, all within an operator-friendly platform.

The NewStream IDU (Indoor Unit) offers a unique type of multi-mode operation which can include ENG (Electronic News Gathering), SNG (Satellite News Gathering) and CNG (Cellular News Gathering) in a space efficient 2-RU (3 ½") by 19" EIA rack-mount chassis. The system includes both MPEG-2 and H.264 AVC (MPEG-4) HD/SD video/audio encoding for ENG and SNG applications and for CNG operations, H.264 ABR (adaptive bit rate) coding to compensate for the dynamic signal fluctuations commonly associated in cellular network infrastructures.

NewStream’s IDU employs advanced programmable OLED (organic light-emitting diode) push button switches which automatically configure themselves based upon the user’s desired mode of operation. The use of OLED smart switches significantly reduces front panel congestion by repurposing otherwise dedicated switches for different operating modes. In addition, they can also provide a color or graphic change-of-status indication in the same switch.

For ENG applications, NewStream includes an all-inclusive mast-mounted ODU (Outdoor Unit) providing 2 GHz or 2 & 7 GHz ultra-linear high RF power output digital amplifiers. It interconnects with the IDU via coaxial or triaxial cable and contains an ancillary RF coax relay to switch between a high-gain directional or optional Omni-directional antenna.

For CNG operations the IDU communicates with a separate cellular ODU that is either roof-top or mast-mounted by means of a MoCa Power over Ethernet (PoE) bridge connection utilizing any standard RG-58 or RG-59 coaxial cable, typically found in most legacy Nycoil assemblies. Mast-mounting the cellular ODU potentially increases broadband cellular connectivity that could be weakened in more congested roof-top mounted installations. Multiple cellular modems inside the ODU are “bonded” together for the seamless transmission of high quality HD (high-definition) video over 3G/4G LTE network service providers such as Verizon, AT&T and T-Mobile.

For SNG applications the NewStream IDU provides control of a fully featured integrated satellite upconverter with L-band output, DVB-S and DVB-S2 modulation.

Key Features

■ Operator-friendly OLED switches ■ Backwards Compatibility ■ Industry-First Cellular ODU ■ Future-Proof ■ Space Efficient 2 rack Unit


■ Electronic Newsgathering ■ Satellite Newsgathering ■ Cellular Newsgathering

SPECIFICATIONS




10/14 ENGRD001096 Rev 7

ENG CELLULAR SNG

OUTDOOR UNIT (ODU)-RF Mast-mounted (single enclosure) Mast-mounted (single enclosure)Optional: Roof-mounted NewSwift, Mantis

2-2.5 GHz 8 Watts (typ.) +/- 1dB @ QPSK, 64 QAM

N/A N/A

4.5-5.0, 6.4-7.1, 6.9-7.5 GHz5 Watts (typ.) +/- 1dB @ QPSK, 64 QAM

N/A N/A

12.7-13.25 GHz 1.5 Watts (typ.) +/- 0.5 dB @ QPSK N/A N/A

CDMA, UMTS, HSPA+, LTE N/A 6-modems, Bonded N/A

IDU to ODU interconnection RG-6/U minimum or better RG-58/U or RG-59/U LMR-400 or equivalent

Size and Weight, ODU 7" w x 10" l x 6" h 16 lbs. (max. @ 2/7 GHz)

10" w x 14" l x 5" h 10 lbs.

TBD

Temperature -20º to +50ºC -20º to +50º C TBD

INDOOR UNIT (IDU) Rack-mount chassis, single

Operator Controls(5) Programmable OLED (organic light-emitting diode) push-button switches, (2) rocker-style switches, (3) LED push-button switches, (1) On/Off push-button switch

Displays (1) Capacitive color touch TFT 5.0" diagonal 800 x 480 white LED backlight display, (2) 16 x 2 segment mono-chromatic blue OLEDs

Presets Up to 99 User configurable3 Operating Modes-Interview, Standard, Mobility

Up to 99 User configurable

Rear panel I/O

BNC - (ASI In, ASI Out, SDI In, CV in, 75 Ω audio, spare)Weidmuller - (analog audio 1L/1R, 2L/2R, digital audio D1, D2, MW ODU power, Ant.)Type ‘N’ or Triax (ODU 2/7 GHz or 2 GHz and 7 GHz legacy MTX ODUs)Type ‘N’ - (L-band Mod. & L-band Mon.); TNC - (to cellular ODU)Miscellaneous- (1) SMA Wi-Fi, (3) RJ45 Ethernet, (1) 115 VAC IEC C14, (1) DB-9 data, (1) USB

Size and Weight, IDU 17.0" W x 16.2" L x 3.5" H (2RUx 19" EIA standard rack-mount), 16 lbs/.45 kg

Prime operating power 115/230 VAC, 2.0 A (typ)

Temperature -10º to +40º C

MODULATION COFDM (DVB-T) OFDMA, CDMA DVB-S QPSK, DVB-S2 QPSK

Optional Modulations LMS-T 10/20 N/A DVB-S2 8PSK, 16/32 APSK

VIDEO INPUT FORMATS HD/SD-SDI HD/SD-SDI HD/SD-SDI

VIDEO RESOLUTIONS HD & SD HD & SD HD & SD

High Definition 1080i, 1080p, 720p 1080i, 1080p, 720p 1080i, 1080p, 720p

Standard Definition 720 x 480i (NTSC), 720 x 576i (PAL) 720 x 480i (NTSC), 720 x 576i (PAL)720 x 480i (NTSC), 720 x 576i (PAL)

VIDEO ENCODING PROFILE MPEG-2, H.264 HD/SD, 4:2:2/4:2:0H.264 AVC HD/SD 4:2:0 High Profile @ Level 4.1

MPEG-2, H.264 HD/SD, 4:2:2/4:2:0

HD Encoding Rate @ 4:2:2 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps

HD Encoding Rate @ 4:2:0 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps

SD Encoding Rate @ 4:2:2 (MPEG-2) 2.0 to 50 Mbps N/A 2.0 to 50 Mbps

SD Encoding Rate @ 4:2:0 (MPEG-2) 1.5 to 15 Mbps N/A 1.5 to 15 Mbps

HD Encoding Rate @ 4:2:2 (H.264) 1.5 to 20 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps

HD Encoding Rate @ 4:2:0 (H.264) 1.5 to 20 Mbps 128 Kbps to 10 Mbps 1.5 to 20 Mbps

SD Encoding Rate @ 4:2:2 (H.264) 1.5 to 15 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps

SD Encoding Rate @ 4:2:0 (H.264) 1.5 to 15 Mbps 128 Kbps to 10 Mbps 1.5 to 15 Mbps

AUDIO ENCODING2- analog stereo/4-mono, AES/EBU (up to 4 pairs embedded in SDI)

1-analog stereo/2-mono, AES/EBU (AAC) (up to 2 pairs embedded in SDI)

2-analog stereo/4-mono, AES/EBU (up to 2 pairs embedded in SDI)

Audio Input (Analog) +8 dBm (avg.) @ 600 Ω bal. +8 dBm (avg.) @ 600 Ω bal. +8 dBm (avg.) @ 600 Ω bal.

THD @ 1 KHz TT <.1% to +18 dBm max. .3% to +18 dBm max. <.1% to +18 dBm max.

S/N (Signal to Noise) >66 db RMS >65 db RMS >66 db RMS

Frequency Response .03-18 KHz ± 1.0 dB .03-12 KHz ± 1.0 dB .03-18 KHz ± 1.0 dB

AES Input (digital) 1.0 V P/P @ 75 Ω unbalanced N/A 1.0 V P/P @ 75 Ω unbalanced

Key Features

■ Receives AirCam and AirStream IP transmissions ■ Utilizes Public Infrastructure to Reduce Costs ■ H.264 Video Quality with HD/SD-SDI Output ■ Web Browser Remote Control ■ Reception Integrity


■ Cellular Newsgathering ■ Rapid Deployment Newsgathering ■ Special Interest Stories ■ High School and College Sports ■ Community Events

LGR-1000LiveGear ReceiverThe LGR-1000 is a receiver and playout device designed to receive AirStream or AirCam IP transmissions via the internet and provide an HD/ SD-SDI output. It can receive up to 4 AirStream, AirCam or NewStream transmissions simultaneously, providing a cost-effective means to receive live, remote Cellular Newsgathering content, which can then be viewed locally on a HD-SDI monitor or streamed to your favorite content delivery networks. There are no expensive receive site infrastructures to support as with traditional electronic newsgathering systems.

The Vislink Hybrid Newsgathering Solution (outlined in the diagram below) combines cellular and microwave transmission technologies at the scene of the event, the LGR-1000 receiver unit at the broadcast studio for IP transmission, and the Video Media Server for push to edge devices, such as smartphones and tablets.

Mobile Networks

Internet

AirCam Max

Livevideo

Microwave or 3G/4G LTE

Broadcast Studio

Streamed to Website

AirStream AirCam Plus 3G/4G LTE or Wi-Fi Video Media Server (optional)

IP

IPLiveGear Receiver

Playout Unit

Edge Devices(PC, Smartphone, Tablet)

HD/SD-SDI

Hybrid Bonded Video Solutions

SPECIFICATIONS




PHYSICALDimensions (excl. connectors):

■ 2 RU ■ 19” w x 3.5” h x 17” d 48.3cm w x 8.9cm h x 43.2cm d

Weight ■ 17.3 lbs. (7.68 kg)

POWER3-Prong IEC C14

■ 100-240 VAC

HARD DISK STORAGEInternal320 GB

CONTROL/DISPLAYSLocal User InterfaceAlphanumeric LCD display and 6-key button controller

Advanced Remote UserPC or laptop via LAN port (web browser interface) sets network control parameters

RECEIVERLANSupported via Ethernet ports remote control

WANRJ-45 ISP connectivity

VIDEO & AUDIOInterfacesHD/SD-SDI standard

FormatsHD, SD

Resolution ■ 1080p: 30 / 29.97 / 25 / 24 / 23.98

■ 1080i: 60 / 59.94 / 50 ■ 720p: 60 / 59.94 / 50 / 24 / 23.98 ■ SD-SDI (480i) NTSC ■ SD-SDI (576i) PAL

Decoding

■ H.264 AVC high profile 4.1 @ 256 kbps to 10 Mbps 4:2:0 (one video output standard)

Digital Audio (Embedded)Dual

IFB Audio2 ea. 1/8” (3.5mm)

9/14 ENGRD000480 Rev B

PHASE ENGENHARIA

Wireless Camera Systems

EXCLUSIVE REPRESENTATIVE:

PHASE Engenharia Ind. e Com. Ltda.

Av. Olegário Maciel 231, Lojas 101 a 105

Barra da Tijuca | Rio de Janeiro, RJ | CEP 22 621 200 Tel +55.21.2493.0125

Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza – Torre C

Indianópolis | São Paulo-SP | CEP 04029-200 Tel +55 11 3589-0125

[email protected] | www.phase.com.br

Documents

Sistemas de Transmissão via Redes de Celular e IP