Embed Size (px)
Citation preview
Customs Classics&
Rods
. .
. .Since 1988
Superior Products for your Woodie Wagon
2009
Tom FritzShop Phone: (763) 241 - 1252
email: [email protected]
catalog #7.2
Preston Wilson’s 1950 Ford Woodie
2008 SEMA Convention
Under construction
18618 145th streetElk River, MN
55330763 241-1252
[email protected] www.ccrod.com
Orders by mail or phone. Personal check, VISA or MASTERCARD arewelcome. Minimum shipping charge of $5.00 on all orders.
ustoms Classics and Rods was estabilished in 1988 by Tom Fritz. His passion and desire to work on and ressurrect a variety of vehicles started off with just a couple of cars in need of metal fabrication. Over the last 20 years, we have grown into doing full restorations and state of the art hot rods. We are doing a variety of things which include: metal fabrication, chassis work, machining special one of a kind parts and hard to find parts, engine modifications, and fully customised parts. Stock to not, it’s all done here. Tom is always looking to help the fellow car enthusiasts finish his project with any help that he can provide.
C
Customs Classics&
Rods
. .
. .Since 1988
Blind NutsBlind nuts for 1934 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Blind nuts for 1937-39 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Blind nuts for 1940 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Blind nuts for 1941-48 Ford wagons and 41 thru 48 Mercurys 303 stainless steel, knurled shank, highly polished, perfect.
Description Item number price1934 Ford blind nut, 5/16-18 thread .950 head dia. 0434-07 $4.651934 Ford blind nut set. 16 pieces 0434-08 $70.00
Blind nuts for 1949-51 Ford and Mercury wagons
303 stainless steel, knurled shank, highly polished, perfect.
-
2
Description Item number priceShort blind nut for upper doors, 5/16-18 thread .750 head dia. 034951-01 $4.35Long blind nut, 5/16-18 thread, .750 head dia. 034951-02 $4.35Blind nut set for metal gate wagons. 52 long nuts, 4 short nuts. 035051-03 $242.00Blind nut set for wooden gate wagons. 64 long nuts, 4 short nuts. 034950-04 $290.00Ford hardware kit for mounting the wood with a metal gate. With 80 seal washers 055051F-05 $49.50Mercury hardware kit for mounting the wood with a metal gate With 80 seal washers 055051M-05 $49.50Ford hardware kit for mounting the wood with a wooden gate. With 100 seal washers. 054950F-06 $57.00Mercury hardware kit for mounting the wood with a wood gate. With 100 seal washers. 054950M-06 $57.00
Description Item number price1937-39 Ford blind nut, 5/16-24 thread, .735 head dia. 043739-11 $4.351937-39 Ford Blind nut, 5/16-18 thread, .735 head 043739-97 $4.351937-39 Ford blind nut set 45 pcs. 12 5/16-24 , thread with .735 head and 33 5/16-18 coarse thread with .735 head 073739-98 $187.00
Description Item number price1940 Ford blind nut, 5/16-18 thread, .735 head dia. 0440-10 $4.351940 Ford blind nut, 5/16-24 thread .735 head dia. 0440-99 $4.351940 Ford blind nut set 50 pcs. 2 5/16-24 fine thrread and 48 5/16-18 coarse thread 0640-70 $205.00
Description Item number price1941-48 Ford blind nut, 5/16-24 thread, .735 head dia. 044148-12 $4.351941-48 Ford blind nut, 5/16-18 thread, .735 head dia. 044148-13 $4.351941-48 Ford blind nut, 3/8-24 thread, .950 head dia. 044148-14 $5.001941-48 Ford blind nut set, all three sizes 70 pieces, 4 large, 12 fine thread, 54 coarse thread. 044148-15 $290.00
Blind nuts for 1946-48 Cheverolet wagons and maybe some other General motors wagons 303 stainless steel, knurled shank, highly polished, perfect.
Blind nuts cont.
Description Item number price1946-48 Cheverolet blind nut. 5/16-18 thread, .740 head dia 044648-17 $4.351946-48 Cheverolet blind nut. 1/4-20 thread, .800 head dia. Used for door hinge screws 044648-18 $4.351946-48 Cheverolet blind nut set. 12 of the 5/16s and 8 of the 1/4 blind nuts. 20 pieces total. 044648-19 $82.00
Tube Screws for 42-48 Chevrolet wagons and maybe some other General motors wagons.303 stainless steel, correct head and tube dia.
Description Item number price42-48 Chevrolet tube screws. 12 per car needed. Sold individually 064248-20 $4.50 ea.
Tube Screws for 49 Chevrolet wagons and maybe some other General motors wagons.303 stainless steel, correct head and tube dia.
Description Item number price49 Chevrolet tube screws. These are longer than the 42-48. 8 per car needed. Sold individually 0649-21 $4.75 ea.
Blind nuts for 1949 and 50 MOPAR wagons303 stainless steel, knurled shank, highly polished, perfect.
Description Item number price1949-50 MOPAR blind nut. Used on Plymouth, Dodge, Desoto and Chrysler. 5/16-18 thread, .960 head dia. 034950-09 $4.651949-50 MOPAR blind nut set. 26 pieces 034950-16 $115.001949-50 MOPAR hardware.3" pan head zinc plated screw. Cut to fit 064950-71 $1.351949-50 Mopar hardware set. 26 pieces of 3" pan head screws 064950-72 $30.00
3
-
Blind nuts for 52-54 Ford and Mercury wagons303 stainless steel, knurled shank, highly polished, perfect.
Description Item number priceThis set is designed to replace all your blind nuts when new wood is installed. 54 pieces. These nuts have a .800 head dia. And a 1/4-20 thread. 075254-93 $225.00
Blind nuts for your 55 thru 67 Ford of Mercury wagonCall and we can set you up with a replacement set.
1949-50 MOPAR034950-09
1946-1948 Chevrolet044648-17
1946-48 Chevrolet 1/4-20044648-18
Blind nuts cont.
034950-09 034950-09 1949-51 Ford Mercury034951-01 034951-02
1934 Ford0434-07
1941-48 Ford blind nuts044148-12-13-14
1940 Ford blind nut0440-10
1937-39 Ford blind nut043739-11
3b
51 Mercury rear0551-28
49-51 Ford/Mercury car/Woodie034951-26 034951-25
Bumper Bolts
1949-50 Mercury bumper bolts These bolts are produced from billet 303 stainless steel. They are the correct rectangular size and have the same multi directional radiuses as the originals. 7/16-20 threads, stainless flat and lock washers and a stainless nut..
1949-51 Ford woodie and Mercury woodie rear bumper bolt These are the same as above.
1949-1959 Ford bumper bolts These bolts are produced from billet 303 stainless steel. They are correct in diameter and head curvature. 7/16-20 threads. 1.010 head dia. Stainless flat and lock washers and a stainless nut. (Also used on some Mercurys such as 1951 fronts and 1953’s.)
1951 Mercury rear bumper bolt Larger in diameter than the Ford bolts, Used only in 51’. Produced from billet 303 stainless steel. They are correct in diameter and head curvature. 7/16-20 threads. 1.110 head dia. Stainless flat and lock washers and a stainless nut.
Description Item number price
1951 Mercury rear bumper bolt 0551-28 $10.50
Description Item number price1949-59 Ford round bumper bolt 044959-27 $8.75
Description Item number price1949-51 Ford woodie and Mercury woodie rear bumper bolt. 034951-26 $28.00
Description Item number price1949-50 Mercury bumper bolt. 034950-25 $28.00
51 Mercury rear0551-28
4
1949-59 Ford Bump Bolt044959-27
1949-51 Ford car and woodie door hinges
Remanufactured door hinges
1949-50 Mercury woodie door hinges Same as above except for the woodie wagon only. The upper A-post hinge is clipped and the bolt mounting locations are different for the wood clearance.
1950-51 Mercury door hinges Media blasted, bored out and SAE 841 sintered bronze bearings pressed in. New hinge pins and all new torx drive mounting screws, bevel lock washers and lock nuts.
1949-50 Mercury door hinges Media blasted, bored out and SAE 841 sintered bronze bearings pressed in. New hinge pins and all new torx drive mounting screws, bevel lock washers and lock nuts.
1950-51 Mercury woodie door hinges
Same as above except for the woodie wagon only. The upper A-post hinge is clipped and the bolt mounting locations are different for the wood clearance.
Ford door hinges are the same on all front doors, 2-doors, coupe, woodie. Media blasted, bored out and SAE 841 sintered bronze bearings pressed in. New hinge pins and all new torx drive mounting screws, bevel lock washers and lock nuts.
Description Item number price1949-51 Ford door hinges 034951-35 with core 255.00
without core 390.001949-51 Ford rear door hinges 034951R-35 with core 255.00
without core 335.00
Description Item number price1950-51 Mercury 8 bolt door hinges used on woodie wagons. 035051-34 with core 291.00
without core 539.00
Description Item number price1950-51 Mercury 8 bolt door hinges for 2-doors and the fronts of 4-doors 035051-32 with core 255.00
without core 440.001950-51 Mercury rear door hinges for your 4-door car 035051R-32 with core 255.00
without core 302.50
Description Item number price1949-50 Mercury 10 bolt door hinges used on woodie wagons 034950-31 with core 290.00
without core 539.00
Description Item number price1949-50 Mercury 10 bolt door hinges for 2 doors and the fronts of 4 doors 034950-30 with core 255.00
without core 440.001949-51 Mercury rear door hinges for your 4 door car. 034951R-30 with core 255.00
without core 302.50
5
1950-51 Mercury car035051-32
1949-51 Ford door hinges034951-35
1949-50 Mercury woodie hinges034950-31
1949-50 Mercury car034950-30
6
Hinge construction detail
Remanufactured door hinges cont.
1950-51 Mercury car
1949-50 Mercury woodie hinges034950-31
1949-50 Mercury car034950-30
1949-51 Ford door hinges034951-35
7
1950-51 Ford and Mercury door hinge screwsThese are new flat head philips screws
Door Hinges hardware
1949-51 Ford hinge pin Same as above except shorter for the Ford hinge.
1949-50 Ford and Mercury door hinge screws We have a supply of OEM. Style Philips dome headed screws.
1949-51 Mercury hinge pin A new pin that we make in house. This pin is exactly the same as the original Mercuryunit. The same small domed head, shank knurls and even the oil grooves. Case hardened..
1948 and earlier Ford and Mercury door hinge screws
Hinge screw for early Fords. Has the clipped head so it sits down in the hinge.
Miscellaneous door hinges The same care and procedures used for the 49-51 Ford and Mercury hinges are used on other makes and models. Please call with your needs. We can, if needed, recreate missing parts to complete the set.
Miscellaneous door hinge pins
Custom hinge pins for your unique application in stainless steel or plain steel
Description Item number priceCustom door hinge pin 06PIN-92 call for price
Description Item number priceRemanufactured door hinge 04HINGE-39 call for price
Description Item number price1949-51 Mercury door hinge pin. .280 dia. 044951-37 $6.501950-51 Mercury door hinge pin. .312 dia. 055051-80 $6.75
Description Item number price1949-51 Ford hinge pin. .280 dia. 044951-38 $6.501949-51 Oversized pin to use in case of oversized holes. Same construction as all other pins..312 Dia. 055051-80 $6.75
Description Item number priceEarly hinge screw. 3" long 5/16 thread, threaded all the way to the head 063248-91 $3.00
Description Item number price49-50 Ford screw set with proper style lock washers and OEM style nuts. [ 32 screws,32 lock washers and 4 lock units] 084951-83 $42.0049-50 Mercury screw set with proper style lock washers and OEM style nuts. [40 screws,40 lock washers and 12 lock units] 084950-81 $66.0050-51 Mercury screw set with proper style lock washers and OEM style nuts. [32 screws,32 lock washers and 4 lock nuts] 085051-94 $45.0050-51 Ford/Mercury OEM style NOS door screw with lock washer 084951-95 $1.25
Description Item number price49-51 Ford NOS screw set with proper style lock washers and OEM style nuts. [ 32 screws,32 lock washers and 4 lock units] 064951-73 $42.0049-50 Mercury NOS screw set with proper style lock washers and OEM style nuts. [40 screws,40 lock washers and 12 lock units] 064950-74 $66.0050-51 Mercury NOS screw set with proper style lock wshers and OEM style nuts. [32 screws,32 lock washers and 4 lock nuts] 065051-75 $45.0049-51 Ford/Mercury dome headed phillips NOS door screw with lock washer 064951-76 $1.25
Mid 30’s Ford Woodie hinges.An example of custome hinge repair
Early Ford hinge screw063248-91
OEM hinge screws, lock nuts and washers064951-76
Stainless pin for a Packard.An example of one of the manycustom parts we can produce
Door Hinges cont.
1949-51 Ford door hinge pin044951-38
1949-51 Mercury himge pin044951-37
Mid 30’s Ford Woodie hinges.An example of custome hinge repair
Early Ford hinge screw063248-91
8
1937 Ford Woodie hinges.An example of custome hinge repair
Woodie tailgate hardware
1949-51 Ford and Mercury upper tailgate handle bushing Billet 303 stainless steel polished to a mirror. Used to fill the space between the interior handle and the tailgate.
1950-51 Ford and Mercury tailgate hook shoulder bolt 303 stainless steel, 1/4 –20 fine thread, same dimensions as the original.
1949-51 Ford and Mercury upper tailgate striker Billet 303 stainless steel polished to a mirror. All angles correctly machined for proper primary and secondary latch operation. Includes mounting screws in stainless steel.
1950-51 Ford and Mercury tailgate hook brackets 303 stainless steel or 16 gauge cold roll steel. Hook hole is rolled and squared. Like the original.
1949-51 Ford and Mercury tailgate arms shoulder screw 303 stainless steel, same large head with correct diameter and dome. Correct oversized screw driver slot and the correct shoulder to fit into lower tailgate arm limit strap.
1949-51 Ford and Mercury tailgate limit strap eye bolt
303 stainless steel, eye bolt used to attach the tailgate travel limit strap to the tailgate.
1949-51 Ford and Mercury upper tailgate latch tongue Replacement latch tongue for your upper gate latch.
Description Item number price1949-51 upper tailgate striker 034951-40 $50.00
9
Description Item number price1949-51 upper tailgate handle spacer 044951-24 $11.25
Description Item number price1950-51 Ford and Mercury tailgate hook shoulder bolt with stainless lock nut. 1/2" hex head. 045051-41 $12.501950-51 Ford and Mercury tailgate hook shoulder bolt with stainless lock nut. 9/16" hex head. 055051-29 $12.50
Description Item number price1950-51 Ford and Mercury tailgate hook bracket pair in stainless steel with correct style stainless steel mounting screws. 045051-42 $45.001950-51 Ford and Mercury tailgate hook bracket pair in plain steel with correct style mounting screws. 045051-43 $25.00
Description Item number price1949-51 Ford and Mercury tailgate limit strap shoulder screw. 044951-44 $19.50
Description Item number price1949-51 Ford and Mercury tailgate limit strap eye bolt. 044951-45 $29.50
Description Item number price1949-51 Ford and Mercury latch tongue. 064951-78 $26.501949-51 Ford and Mercury latch tongue in stainless steel. 064951-33 $55.00
Tailgate hook shoulder bolt045051-41
Stainless hook bracket045051-42
Plain steel hook bracket045051-43
1949-51 Upper handle bushing044951-24
1949-51 Ford, Merc shoulder screw044951-44
49-51 Tailgate eye bolt044951-45
1949-51 Latch tongue064951-78
10
Woodie tailgate hardware cont.
Tailgate hook shoulder bolt Stainless hook bracket
Plain steel hook bracket 1949-51 Upper handle bushing 1949-51 Ford, Merc shoulder screw1949-51 Upper handle bushing 1949-51 Ford, Merc shoulder screw1949-51 Ford, Merc shoulder screw
1949-51 Ford/Merc upper gate striker034951-40
49-51 Tailgate eye bolt 1949-51 Latch tongue
1949-51 Ford and Mercury tail lamp leg A replacement for your bent or missing leg. Comes with the foot, mounting gasket and
mounting screws. No rivets in joints
Woodie tailgate hardware cont.
1949-51 Ford and Mercury Tail Lamp Pad
wood gate tail lamp or replace your bad one.
Tail lamp pad, drivers side or passenger side with a wood gate. 064951-58
1949-51 Ford and Mercury tailgate wear strips Replacements for your dented originals. These are machined from Billet 304 stainless steel.
Not a stamped part. They come in a 5 piece set or a 3 piece set in plain steel or polished stainless steel.
1949-51 Ford and Mercury upper tailgate gas strut kit Replace the original poorly functioning factory lift kit with this direct bolt in replacement
kit. This kit fits exactly as the original but uses modern gas charged struts. The mounting brackets are available in stainless steel or plain
steel, with or without the blackgas struts.
Description Item number price5 piece set in stainless steel with the 20 mounting screws 044951-46 $265.003 piece set in stainless steel with the 12 mounting screws 044951-47 $265.005 piece set in plain steel with the 20 mounting screws 044951-48 $265.003 piece set in plain steeel with the 12 mounting screws 044951-49 $265.00
Description Item number priceReplacement tail lamp leg assembly 044951-53 $69.00
Description Item number priceTail lamp pad, passenger side for a metal gate. 065051-57 $29.90Tail lamp pad, drivers side or passenger side with a wood gate. 064951-58 $29.90
Description Item number priceStrut kit in polished stainless steel with polished stainless hardware and black struts. 044951-54 $185.00Strut kit in plain steel with plain steel hardware and black struts. 044951-55 $110.00Strut kit in polished stainless steel with polished stainless hardware and no struts. $150.00Strut kit in plain steel with plain steel hardware and no struts. 044951-100 $69.00 11
1949-51 Ford and Mercury Tail Lamp Leg Foot Replacement foot for your tail lamp leg.
Description Item number price
Replacement foot 074951-50 $18.90Replacement foot gasket 074951-51 $1.65Replacement stainless foot mounting screw with lock washer 074951-52 $1.25 ea
Description1949-51 Ford and Mercury tail lampsThese tail lamps are a replacement for your missing lamps. They have highly polished stainless metal housing, glass lenses and a stainless lenses retainer. Available with a black housing or a stainless one.
1949-51 Ford and Mercury tail lamp wire coverThis is the wire cover that attaches tothe back side of the tail lamp housing. It directs the wires down and away from the rear of the sheet metal cover.
Description Item number priceStainless tail lamp housing with license lamp. Driver side. 044951-22L $44.00Stainless tail lamp housing no license lamp. Passenger side 044951-22R $44.00Blue dot lenses for above lamps. 044951-23 $15.95
Description Item number priceTail lamp wire cover in plain steel 044951-36 $11.00
044951-35
Replacement tail lamp to tailgate mounting pad. Use to change a metal gate tail lamp to a
Strut kit stainless
0449515-54
1949-51 Tail lamp foot and leg044951-53
Woodie tailgate Parts
1949-51 Tail gate wear strips044951-46
Strut kit stainless
1949-51 Tail lamp foot and leg
Strut kit without struts in stainless044951-
Strut kit installed in a 49-51 Ford/Mercury
12
Interior Parts
1949-51 Ford and Mercury woodie linoleum retainers Linoleum retainer used around the rear wheel tubs in your woodie.
1949-51 Ford and Mercury woodie fuel pipe retainer
1949-51 Ford cowl kick panel retainers Cowl kick panel retainers for cardboard and plywood panels used in woodies. Available in plain steel or in polished stainless steel.
1946-48 Chevrolet interior handle escutcheons These are beautiful. Two pieces of billet stainless steel with a spring inside. These work and look exactly like the original escutcheons for the door handles and window crank handles.
1937-40 Ford and Mercury woodie rear window lock pins The pins used to latch the rear windows in woodie wagons. Machined from 303 stainless steel.
1949-51 Ford and Mercury woodie rear window lock pins The pins used to latch the rear windows in woodie wagons.
Description Item number priceShort pin used on the latch attached to the glass. Stainless steel. 054951S-66 $9.50Long pin used on the latch attached to the B-post. Stainless steel. 054951L-66 $9.50
Description Item number priceLong pin - machine finish 063740-85 $9.50Short pin - machine finish 063740-86 $9.50Knob for above pins - highly polished 063740-87 $8.00
Description Item number priceKick panel retainers set in plain steel for cardboard kick panels. 044951-60 $45.00Kick panel reatiner set in polished stainless steel for cardboard panels 044951S-60 $80.00Kick panel retainer set in plain steel for plywood kick panels. 044951-61 $45.00Kick panel retainer set in polished stainless steel for plywood kick panels. 044951S-61 $80.00
Description Item number priceLinolium retainer set of 2 in plain steel. 054951-62 $49.00Linolium retainer set of 2 in stainless steel.. 074951S-62 $80.00
Description Item number priceFuel pipe grommet retainer in plain steel with new screws. 044951-63 $19.50Fuel pipe grommet retainer in brushed stainless steel with new stainless screws. 044951S-63 $29.50Fuel pipe to floor grommet. 044951-64 $7.50
Description Item number priceStainless Chevrolet escutcheon 064648-81 $39.00Complete set of 10 escutcheons 064648-82 $325.00
13
Used to seal the fuel filter pipe to the floor
37-40 Ford window lock pins063740-85063740-86063740-87
49-51 Window lock pins054951S-66054951L-66
46-48 Chev Escutcheon064648-81
46-48 Chev Escutcheon064648-81 14
Interior Parts cont.
37-40 Ford window lock pins
49-51 Window lock pins
49-51 Ford Kick panel retainers in stainless steel044951S-60
1949-53 Ford Mercury hood bolts054953-90
49 Ford Merc. door handle push rod0549-68
1949-53 Ford Mercury hood bolts 49 Ford Merc. door handle push rod
Small Items
1949 Exterior door handle pivot pin Pivot pin inside the exterior door handle of 49 Mercury cars, woodies and Ford woodies.
Push rod for Mercury and Ford woodies. Used between door handle and latch.
1949-51 Ford and Mercury woodie door lock cyl. rods The extra long rod used in woodies to reach from lock cylinder to latch.
1949-53 Ford and Mercury hood bolts New hood bolts in polished stainless steel.
1949-51 Ford and Mercury overdrive cable retainers
Description Item number priceStainless hood bolt 054953-90 $9.50
Description Item number priceExterion door handle push rod 0549-68 $3.50
Description Item number pricePivot pin 0549-67 $3.50
Description Item number priceDoor lock cyl. Rod. 054951-65 $8.50
1949 Exterior door handle push rod
Description Item number priceHoop clamp for cable 064951-88 $5.25Double hole bracket for cable end. 064951-89 $4.25
15
1949-1951 Ford and Mercury Woodie and Ford car sheet metal repair and replacement panels.
1949-51 Ford/Mercury woodie rocker panel extensions.These are hand formed in our shop and fitted to a buck so each one is correct. This Part goes from the seam under the B-post to the rear wheel opening. From the underside of the inner rocker to up and under the wood on the side of the car. They are 23 inches long. Longer than needed to allow for trimming at the B-post. These replacement panels are constructed from 19 guage stock as the originals were.
Description Item number priceLeft hand side (drivers) 064951-500L $95.00Right hand side 064951-500R $95.00
1949 early 1950 Ford/Mercury woodie 2nd seat area floor pan.This is a near exact replacement of the floor section where the seat plugs in. This panel goes from the front floor seam back to the upright transission where the 3rd seat passengers feet go. From the seam along the drop area along the outside edge, up to and along the wheel tub over to the edge of the tranny tunnel. The flaps to cover the seat hole plugs are solid riveted on as original was if you have that style. The other style has the seat latches bolted to the bottom of the floor pan. The beads in the panel are the same width and depth. This panel is constructed from 15-gauge stock. Please specify your style.
Description Item number priceLeft hand side (drivers) 064951-501L $290.00Right hand side 064951-501R $290.00
1949-51 Ford/Mercury woodie C-post filler panelThis is the little ¼ round panel that fills the gap at the rear of the floor in the rear corners of the car. The C-post panel comes with the correct bead, and wire harness pass through holes. The felt seals are also included with each one. These filler panels are constructed from 19-gauge stock just like the originals.
Description Item number priceLeft rear corner (drivers) 074951-502L $45.00Right rear corner 074951-502R $45.00
1949-51 Ford car or woodie front fender outer skin patch.This is a 19-gauge repair panel. The folded seam along the door edge is present and prebent to allow the inner brace to slip in. The bottom edge has the step formed as the original did. This panel is 16.25 inches tall from the very bottom edge up and around and onto the side. It is 10 inches wide from the door edge to the wheel opening.
Description Item number priceLeft fender repair panel (drivers) 074951-503L $49.00Right fender repair panel 074951-503R $49.00
1949-51 Ford car or woodie front fender inner brace repair.This is a 19-gauge repair section. This panel has the curve in it to match the bottom of the fender. The mounting flange is there and it is long enough for you to install it where the inner brace is straight and easy to work at. Just above the lower cowl mounting bolt. Overall length is 13 inches.
Description Item number priceLeft fender inner brace repair (drivers) 074951-504L $99.00Right fender inner brace repair 074951-504R $99.00
16
All of the replacement parts on these pages are referenced from these terms. The A-post: The door hinge post. The B-post: The door striker post. The C-post: The post where the tailgate is. The left side: The drivers side, and the right side: The passenger side.
1949-1951 Ford and Mercury Woodie
Sheet Metal
1949-51 Ford or Mercury woodie rear tail pan assembly.These panels are 19-gauge steel, the same as Ford used. They have all the oval mounting holes punched in them. The left and right side panels have the correct bracing on the backside as Ford did them. The middle pan comes unassembled and all the pieces are sold separately.
1949-51 Ford car or woodie dimmer switch cover plateThese are constructed from 20-gauge sheet stock. They are formed up like the originals. They have the holes for the dimmer switch but do not have the holes for mounting the plate to the toe kick. We have found that those holes will vary from car to car and so you should match the cover plate up to the old holes and then drill them out.
Description Item number priceDimmer switch cover plate 074951-509 $45.00
1949-50 Ford woodie A-post floor supportThese are constructed out of 16-gauge steel as Ford had done and are the correct length for the woodie floor pan. These go from the bottom of the A-post (where the door hinges mount) to the center of the car at the opening in the floor for the transmission. These are not like the other ones that are too short and constructed from 20-gauge stock. The drivers side support has the recess for the removal of the clutch pedal just as the original or order the one with out if you are building a hot rod.
Description Item number priceA-Post floor support left side with clutch recess. 074950-510L $230.00A-Post floor support left side without clutch recess. 074950-511L $190.00A-Post floor support right side (passenger) 074950-510R $190.00
1949-50 Ford woodie B-post floor supportThese are constructed out of 16-gauge steel as Ford had done and are the correct length for the woodie floor pan. The sides with the large holes in them are also 16 gauge, instead of 19 guage, to add stiffness to the whole structure. Unlike the car ones or the aftermarket ones they are the correct length and gauge of metal for the wider woodie. These go from the B-post (where the door striker is) to the center tunnel of the wagon.
Description Item number priceB-Post floor support leftside (drivers) 074950-512L $290.00B-Post floor support right side 074950-512R $290.00
17
Description Item number priceLeft side tail pan with tail lamp threaded holes (drivers) 074951-505L $195.00Right side tail pan with tail lamp threaded holes 074951-505R $195.00Right side tail pan with No tail lamp holes 074951-506R $175.00
Center tail pan. The outer cover. 074951-507 $180.00Center tail pan inner panel used in 49, early 50 but works well in any years to stiffen assembly 074950-507 $120.00
Left side inner brace, repair section for the lower 3/4'a of the brace 074951-508L $24.50Center inner brace, repair section for the lower 3/4'a of the brace 074951-508C $24.50Right side brace, repair section for the lower 3/4'a of the brace 074951-508R $24.50
Left side tail pan with No tail lamp holes 074951-506L $175.00
Sheet Metal
Sheet Metal cont.
1949-51 Ford woodie B-post to wheel tub floor panelThese are constructed from 18-gauge steel. These panels have the stepped edge going from front to rear on the floor side and have the 90-degree flange on the inner rocker side. The panel has the wedge shaped step in it that goes from the middle of the panel to the wheel tub end and is about 3 13/16” at the wheel tub. The upper part of the panel at the wheel tub has the curved flange to meet up with the wheel tub edge.
Description Item number priceB-Post floor (drivers) 074951-513L $149.00B-Post floot 074951-513R $149.00
1949-51 Ford woodie lower A-post interior extension repair This repair section is constructed from 20-gauge material. This repair panel is 8 inches long and goes from the bottom (the floor) up 8 inches. It has the first rectangular hole in it and has the same taper as the original for a smooth fit. This repair panel is designed to be butt welded into place.
Description Item number priceA-Post extension repair (drivers) 074951-514L $89.00A-Post extension repair 074951-514R $89.00
1949-51 Ford/ Mercury rear floor side extensionsThis replacement panel goes from the wheel tub to the C-post. From the edge of the main floor out to the inside edge of the outer body. The driver’s side has the flanged hole for the gas filler pipe. Both panels have the stepped edge to go under the center floor like Ford did it. They have the 1/8” deep stepped recess that goes front to rear and ends at the tailgate hinge.
Description Item number priceRear floor extension (drivers) 074951-515L $145.00Rear floor extension 074951-515R $125.00
1949-51 Ford/ Mercury woodie wheel tub forward body mountThis replacement mount goes in front of the wheel tub and behind the B-post. It is constructed from 12-gauge material. The original is constructed from thinner 13 gauge. This part is designed to replace your bent or rusted original.
Description Item number priceWheel tub body mount left side (drivers) 074951-516L $29.00Wheel tub body mount right side 074951-516R $29.00
18
1949-51 Ford woodie B-post to wheel tub floor access panelThis is the panel that is screwed to the floor along the outside edge of the floor between the B-post and the wheel tub. This part is the one that goes on top ot the 074951-513. Constructed from 18-guage material just like Henry’s was.
1949-51 Ford woodie B-post interior bottomThis is the little angle part that is welded to the bottom of the B-post and to the floor and part #522 sets on top of it. Constructed from 18 guage steel.
Description Item number priceB-post access panel 084951-522L $49.00B-post access panel (passenger) 084951_522R $49.00
Description Item number priceB-post interior bottom 084951-523L $45.00B-post interior bottom (passenter) 084951-523R $45.00
Sheet Metal cont.
1949-51 Ford/ mercury woodie rear wheel tub repair panelsThese panels are the lower tails of the wheel tub that rust off or are crushed. They are constructed from 18-gauge sheet stock and formed in our shop. The rear tail panel is 13” tall from the bottom lowest edge and 15” wide. The front panel is 9” tall from its lowest edge and 14” wide. These panels have the formed edge that buts into the quarter panel.
Description Item number priceLeft side (drivers) front repair panel 074951-517LF $145.00Right side front repair panel 074951-517RF $145.00
Left side (drivers) rear repair panel 074951-518LR $120.00Right side rear repair panel 074951-518RR $120.00
We custom make panels for customers all the time. Call us with your needs
18b
1949-51 Ford/Mercury woodie metal to wood gate conversionThis is a kit to convert your metal gate to a wood gate. With the removal of the outer skin and then the addition of these parts your gate is now the same as a wood gate. These panels are 19 gauge. The main center panel is designed to be but welded into place and the filler tabs get welded on top of the old gate in the slot at the top of the gate. A wood gate inner spare tire-mounting bracket has a higher profile than the one used with a metal gate. An original wood gate one will work if you have one or use our duplicate reproduction. The reproduction one is constructed from 13 gauge stock and has the ribs formed in the bottom just as the original. The reproduction also has the four shouldered studs welded in place. The outer bracket is an exact copy of the original, use ours or find and original. The outer bracket is different for a wood gate than the one used on the metal gate. The reproduction outer bracket comes with the tire-mounting studs welded in place. The inner spare tire-mounting bracket is 13 gauge material just like Henry made them. The outer spare tire-mounting bracket is 11 gauge as the original one was.
Description Item number priceMetal to wood gate conversion kit. 075051-519 $99.00This kit contains the following: Upper cross rail filler panel, 5 upper groove filling tabs, 3 spacers for the wood under the blind nuts and, 6 spacers for the wood at wood screw locations.Inner spare tire mounting bracket for a wood gate 074950-520 $365.00Outer spare tire mounting bracket for a wood gate. 074950-521 $365.00
Sheet Metal Pictures
19
A-post floor supports
074951-510L 074951-510L
C-post filler panels Front fender outer skin patch 074951-502L and - 502R 074951-503L and 074951-503R
B-post floor supports Rocker panel extensions 074950-512L 074950-512L and -512R 064951-500L and -500R
Rocker panel extension Rear wheel tub forward repair panel 064951-500R 074951-517LF and -517RF 074951-517RF
Sheet Metal Pictures
Center tail pan inner panel Center tail pan outer panel 074950-507IN 074951-507
A-post interior repair bottoms Left and right side tail pans 074951-514R and -514L 074951-505L and -505R 074951-505R
A-post interior repair bottom Rear floor side extensions Front fender inner brace repair 074951-514L 074951-151L and -515R 074951-504R
Inner spare tire mounting bracket Outer spare tire mounting bracket 074950-520 074950-521
Sheet Metal Pictures
21
B-post to wheel tub floor panel Wheel tub forward body mount 074951 -513L and 074951-513R 074951-516L and 516R
B-post to wheel tub floor access panel Dimmer switch cover plate
084951-522L and 084951-522R 074951-509
Left, right and center tail pan braces B-post interior bottom 074951-508L and 074951-508C and 074951-508R 084951-523L and -523R
Second seat floor pan for 1949 and early 1950
064950-501L and 064950-501R
