Since 1883, Duff-Norton has manufactured quality ... · Since 1883, Duff-Norton has manufactured quality industrial lifting, positioning and material handling equipment. Today, Duff-Norton

Since 1883, Duff-Norton has manufactured quality industrial lifting, positioning and materialhandling equipment. Today, Duff-Norton continues this tradition through its dedication to theISO 9001 standard of excellence.

Duff-Norton Manufactures the Following Products:

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation Information . . . . . . . . . . . . . . . . . . . . . . . . 5

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Application Analysis Form . . . . . . . . . . . . . . . . . . . . . . .8

Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . 9

Technical Information100 Pound CapacitySeries TMD100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

250 Pound Capacity Series TMD250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Series TMA250-MP . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Series TMAL250-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Series TMD250-MP. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Series TMDL250-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 20

500 Pound CapacitySeries TMA500-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Series TMAL500-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Series TMD500-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Series TMDL500-MP . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Series TA500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

1000 Pound CapacitySeries TA1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Series TMAL1000-HD . . . . . . . . . . . . . . . . . . . . . . . . . 34

1500 Pound CapacitySeries TMAL1500-SP . . . . . . . . . . . . . . . . . . . . . . . . . 38

Series TMD1500-SP . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Series TMDL1500-SP . . . . . . . . . . . . . . . . . . . . . . . . . 42

2000 Pound CapacitySeries TMAL2000-SP . . . . . . . . . . . . . . . . . . . . . . . . . 44

Modular Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Digital Position Indicator . . . . . . . . . . . . . . . . . . . . . . . 62

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . 64

Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Contents

4 Duff-Norton • (800) 477-5002 • www.duffnorton.com

Introduction

Packaged Solutions, CountlessApplications

Duff-Norton Customer Service Programs

Duff-Norton gives you the benefit of over a century of customer service. From stocking distribu-tor programs, to expert application engineering, Duff-Norton is committed to providing youwith the right solution every time. Our staff works hard to make sure you always get the productyou need, when you need it.

The answer to all of your questions are always just a phone call away. Our Sales Engineers areready to answer any question you may have about price, volume orders, availability or delivery.Additionally, there is always a District Sales Manager near you, ready to discuss your applicationand any special requirements you may have. Duff-Norton’s Application Engineers will applytheir years of experience to determine the right product to fit your needs, or to design a completesystem to fulfill all of your requirements. This saves you time and money in the design, specifica-tion, procurement and installation of system components.

Whether you need a packaged solution, or one that has been custom designed to fit your specifi-cations, Duff-Norton offers the expertise that comes from working closely with our worldwidecustomers. Combined with this history is a commitment to technology. We strive to constantlyimprove our manufacturing methods and stay ahead of industry trends in both our products andour philosophies. This comprehensive approach to customer service makes Duff-Norton actua-tors an exceptional value; we are always aware that we must provide the right solution everytime.

Next time you have a linear motion need, call Duff-Norton first. Our Customer Service staff willtake it from there!

Duff-Norton • (800) 477-5002 • www.duffnorton.com 5

Installation Information

Tension Compression

Duff-Norton electromechanical actuators can be used intension, compression, or combination tension/compressionapplications. Examples of tension and compression areshown on right.

It is important to mount the actuator so that side loading and eccentric loading are avoided.To optimize the performance and life of the actuator, it should be mounted so that the load isapplied along the longitudinal axis of the translating tube. Examples of proper and improperloading arrangements are shown below.

Once the optimal mounting arrangement has been determined,Duff-Norton electromechanical actuators are mounted bysimply slipping a solid pin through the translating tube clevisand rear housing clevis. The pins must be parallel to eachother in order to avoid binding. The actuator restrainingbrackets and related hardware must be able to withstand thetorque generated by the actuator as it extends and retracts.Restraining torque varies with actuator family.

Side Loading Eccentric Loading

Improper LoadingProper Loading

Installation and Loading


Applications

Tilt /Pivot

Duff-Norton Electro-mechanical Actuatorscan be used to tiltobjects, fixed at oneend, up to 180° from their starting positions.The extension and retraction of the actuatorcauses the object to pivot about its stationaryend.

Portable Roadside LightingProblem: Construction and emergency crews need portablelighting for work at night. Lighting that is compact for traveland easily erected on location was difficult to find.

Solution: A Duff-Norton electromechanicalactuator mounted to the skeleton of thelighting system allows the lights to bedrawn flush against the vehicle, then fullyextended on location at the flip of aswitch.

Lift/Lower

Duff-Norton Electro-mechanical Actuatorscan handle any liftingand lowering applicationup to 2000 lbs (910 kgs). As the translatingtube of the actuator extends and retracts, theobject that the actuator is attached to israised and lowered at a constant speed.

Drill Press TableProblem: When work pieces of different sizes require manualmachining, it is necessary to adjust the height of the drill presstable. Adjusting the height of the table manually is bothtime consuming and fatiguing.

Solution: A Duff-Norton electromechanical actuatormounted under the table allows the operator to changethe height of the table as often as needed using eitherhand or foot controls.

Position

When an applicationrequires periodic adjust-ment to the position ofan object or objects,Duff-Norton Electromechanical Actuators pro-vide the solution. The motion of the actuatorallows the operator to position an object bysimply pushing a button.

Dental ChairProblem: Dental chairs must be highly adjustable to positionpatients for different procedures. The movement of the chairmust be smooth and reliable.

Solution: Duff-Norton electromechanicalactuators are built into the frame of the chair.They are operated independently to allowprecise positioning of the patient.


Roll/Slide

When it is necessary toroll or slide an object ora mechanical assemblyinto position, a Duff-Norton electromechanical actuator is theanswer. The movement of the actuator caus-es the clamping, rolling or sliding of thedesired object.

Drum/Barrel LifterProblem: Hazardous material sealed in drums must be han-dled and processed for disposal. It is desirable to minimizehuman involvement in the process.

Solution: Two Duff-Norton electromechanical actua-tors are used in each assembly. One operates a setof ratcheting clamps that securely grasp the drum.The other actuator lifts the drum so it can be movedto its next location.

Open/Close

A Duff-Norton electro-mechanical actuatormounted on a door, gate,or valve allows openingand closing operations on either a timed, oron-demand basis. As the actuator retracts,the gate is opened at a steady rate; theextension of the actuator returns the gate toa closed position.

Industrial OvenProblem: Industrial oven doors can be very large and mustoften be opened and closed on a timed basis to allow for thesteady flow of material in and out.

Solution: A Duff-Norton electromechanicalactuator is connected to the oven doorand operated by an electronic control sys-tem. The actuator opens and closes thedoor to allow materials to enter and exitwhen prompted by the control system.

Tension

Duff-Norton Electro-mechanical Actuatorsoffer a perfect solution forapplications in which ten-sion on a conveyor or webb must be main-tained and adjusted. An actuator mounted ona frame or roller extends and retracts to con-trol the tension in the system.

Conveyor SystemProblem: The tension in conveyor belts must frequently beadjusted to allow for crates of different sizes and to take upslack in the system that develops with use.

Solution: A Duff-Norton electromechanical actuator is mountedto a roll at one end of the conveyor sys-tem. At the push of a button the actuatoradjusts the position of the roll, controllingthe tension in the entire system.Actuators can also be used to repositionconveyor systems.

Applications



Quick Reference Guide


RElectromechanical Actuator

100 Pound CapacitySeries TMD100

TMD01-1406-stroke12 VDC without Limit Switches


TMD01-1906-stroke12 VDC with Limit Switches


Model Number

Compact and economical. Timing belt drive for quiet,smooth operation. Low current draw and keyed translating tube simplify installation requirements.

Specifications

Capacity . . . . . . . . . .

Static Load . . . . . . . .

Motor . . . . . . . . . . .

AC Power Options . . . .

Stroke Lengths . . . . . .

Duty Cycle . . . . . . . .

Construction . . . . . . .

Mounting . . . . . . . . .

Load Screw . . . . . . . .

Limit Switches . . . . . .

Extend/Retract Control . .

Temperature Range . . . .

Restraining Torque . . . .

Pulse Generator . . . . . .

100 lbs (45.4 Kgf, 445 N) tension or compression loads.

300 lbs (136 Kgf, 1334 N) maximum.

12 VDC or 24 VDC permanent magnet type; electrically reversible by polarity reversal.

See power supplies, part no. PS1260 and part no. 4824.

2, 4, 6, 8, 10, and 12 inch (50, 102, 152, 203, 254, and 304 mm).

25% at full load and 77°F ambient

Aluminum housings, stainless steel translating tube.

Double clevis ends. Translating tube clevis threaded 10-32UNF to accept rod end.

Acme thread.

Independently adjustable. Includes control enclosure with relay, fuse and terminalblocks for power and switch connections. Enclosure may be mounted on actuator tubeor mounted separately.

Optional. See part no. EM1010-58.

-20°F to 120° F (-29°C to 50°C).

Keyed translating tube resists rotation.

Optional feedback device. Contact Application Engineering for specifications.

100 P

ou

nd

Ca

pa

cit

y

Note: Model number prefix for

pulse generator models is PTD01.


Dimensions

Wiring Connections

Performance Characteristics

Optional Rod EndPart #EM1010-56

100 P

ou

nd

Ca

pa

city

TMD100

[34 kgf] [45 kgf](333 N) (445 N)75 lbs 100 lbs

Load lbs. (N) [kgf]

(111 N)[11 kgf] [23kgf] [34 kgf] [45 kgf]

(222 N) (333 N) (445 N)25 lbs 50 lbs 75 lbs 100 lbs

Load lbs. (N) [kgf]

(111 N)[11 kgf] [23kgf] [34 kgf] [45 kgf]

(222 N) (333 N) (445 N)25 lbs 50 lbs 75 lbs 100 lbs

24 VDC

12 VDC

7

5

50%

45%

40%

35%

30%

25%

20%

7

6

5

4

3

2

1

AmpsAmp Draw vs. Load

Load vs. Duty Cycle

(12 & 24 VDC)Speed vs. Load


250 Pound CapacitySeries TMD250





Model Number

Compact and economical. Corrosion resistant materialsthroughout. Timing belt drive for quiet, smooth operation.Low current draw and keyed translating tube simplifyinstallation requirements.

Specifications

Capacity . . . . . . . . . .

Static Load . . . . . . . .

Motor . . . . . . . . . . .

AC Power Options . . . .

Stroke Lengths . . . . . .

Duty Cycle . . . . . . . .


Mounting . . . . . . . . .

Load Screw . . . . . . . .


Extend/Retract Control . .

Temperature Range . . .

Restraining Torque . . . .

Pulse Generator . . . . . .

250 lbs (113.4 Kgf, 1112 N) tension or compression loads.

300lbs (136 Kgf, 1334 N) maximum.

12 VDC or 24 VDC permanent magnet type; electrically reversible by polarity reversal.

See power supplies, part no. PS1260 and part no. 4824.

2, 4, 6, 8, 10, and 12 inch (50, 102, 152, 203, 254, and 304 mm).

25% at full load and 77°F ambient

Aluminum housings, stainless steel translating tube.

Double clevis ends. Translating tube clevis threaded 10-32UNF to accept rod end.

Acme thread.

Optional, customer installed. Independently adjustable. Includes control enclosure withrelay, fuse and terminal blocks for power and switch connections. Enclosure may bemounted on actuator tube or mounted separately.

Optional. See part no. EM1010-58.

-20°F to 120° F (-29°C to 50°C).

Keyed translating tube resists rotation.

Optional feedback device. Contact Application Engineering for specifications.

250 P

ou

nd

Ca

pa

cit

y

Note: Model number prefix for

pulse generator models is PTD02.



Dimensions

Wiring Connections


Optional Rod EndPart #EM1010-56

250 P

ou

nd

Ca

pa

city

TMD250

60(1524)

Speed (mm/min) in/min

Load lbs. (N) [kgf]

24 VDC

12 VDC

(1397)

(1270)

(1143)

(1016)

(889)

(762)

(635)

(508)

(222 N)[23 kgf] [45 kgf] [68 kgf] [91 kgf] [113 kgf]

(445 N) (667 N) (890 N) (1112 N)

55

50

50 lbs 100 lbs 150 lbs 200 lbs 250 lbs

Speed vs. Load

45 45

24

40

35

30

25

20

24 VDC

12 VDC

7 7

4.5

37%

35%

33%

31%

29%

27%

25%

6

5

4

3

2

1

0

Amps

Load lbs. (N) [kgf]


(445 N) (667 N) (890 N) (1112 N)50 lbs 100 lbs 150 lbs 200 lbs 250 lbs

Load lbs. (N) [kgf]


(445 N) (667 N) (890 N) (1112 N)50 lbs 100 lbs 150 lbs 200 lbs 250 lbs

Amp Draw vs. Load Load vs. Duty Cycle(12 & 24 VDC)



250 Pound CapacitySeries TMA250-MP

SPB 3405115 VAC (60 Hz) with Clutch


HSPB 3405115 VAC (60 Hz) High Speed

with Clutch

Model Number

Specifications

250 P

ou

nd

Ca

pa

cit

y


Dimensions


250 P

ou

nd

Ca

pa

city

TMA250-MP



250 Pound CapacitySeries TMAL250-MP

MPB 3905115 VAC (60 Hz) with Limit Switches


HMPB 3905115 VAC (60 Hz) High Speed

with Limit Switches

PMPB 3905115 VAC (60 Hz) with Limit Switches and Potentiometer


PHMPB 3905115 VAC (60 Hz) High Speed

with Limit Switches and Potentiometer

Model Number

Specifications

250 P

ou

nd

Ca

pa

cit

y


Dimensions


250 P

ou

nd

Ca

pa

city

TMAL250-MP



250 Pound CapacitySeries TMD250-MP

MPD 340512 VDC with Clutch


HMPD 340512 VDC High Speed

with Clutch

Model Number

Specifications

250 P

ou

nd

Ca

pa

cit

y


Dimensions


250 P

ou

nd

Ca

pa

city

TMD250-MP



250 Pound CapacitySeries TMDL250-MP

MPD 390512 VDC with Limit Switches


HMPD 390512 VDC High Speed

Limit Switches

Model Number

Specifications

250 P

ou

nd

Ca

pa

cit

y


Dimensions


250 P

ou

nd

Ca

pa

city

TMDL250-MP



500 Pound CapacitySeries TMA500-MP



HSPB 6405115 VAC (60 Hz) High Speed

with Clutch

Model Number

Specifications

500 P

ou

nd

Ca

pa

cit

y


Dimensions


500 P

ou

nd

Ca

pa

city

TMA500-MP



500 Pound CapacitySeries TMAL500-MP



HMPB 6905115 VAC (60 Hz) High Speed

with Limit Switches



PHMPB 6905115 VAC (60 Hz) High Speed

with Limit Switches and Potentiometer

Model Number

Specifications

500 P

ou

nd

Ca

pa

cit

y


Dimensions


500 P

ou

nd

Ca

pa

city

TMAL500-MP



500 Pound CapacitySeries TMD500-MP



Model Number

Specifications

500 P

ou

nd

Ca

pa

cit

y


Dimensions


500 P

ou

nd

Ca

pa

city

TMD500-MP



500 Pound CapacitySeries TMDL500-MP



Model Number

Specifications

500 P

ou

nd

Ca

pa

cit

y


Dimensions


500 P

ou

nd

Ca

pa

city

TMDL500-MP



500 Pound CapacitySeries TA500

Specifications

500 P

ou

nd

Ca

pa

cit

y

TAL05-1A10115 VAC (60 Hz) with Limit Switches

TAP05-1A10115 VAC (60 Hz) with Limit Switches

and Potentiometer

TAL05-2A10220/230 VAC (50/60 Hz) with Limit Switches

TAP05-2A10220/230 VAC (50/60 Hz) with

Limit Switches and Potentiometer

TAC05-1D2012 VDC with Clutch

TAC05-2D2024 VDC with Clutch

Model Number

Capacity . . . . . . . . . .

Static Load . . . . . . . .

Motor . . . . . . . . . . .


Mounting . . . . . . . . .

Drive . . . . . . . . . . . .


Potentiometer . . . . . . .

Clutch . . . . . . . . . . .


500 lbs (227 Kgf, 2224N), tension or compression

1000 pounds maximum.

AC - TENV, permanent - split - capacitor design requiring externally mounted motorrun capacitor.DC - Permanent magnet. (Note: All models use automatically resetting thermal protectors)

Aluminum housing and outer tube, stainless steel translating tube with urethane wiper.Fully sealed and gasketed. Permanently lubricated and maintenance free in normaloperation.

Clevis each end.

All-metal gear drive with self-locking Acme screw. Bronze lifting nut.

(TAL & TAP models): Internal, fully adjustable. With terminal strip for all wiringconnections.

(TAP models): 5000Ω. Approx. 100Ω per inch change.

(TAC models): Internal to gearbox; provides overload and jam protection.

-20 to 120°F (-29 to 49°C)

TAC MODELS

TAL & TAP MODELS


Dimensions

Wiring

500 P

ou

nd

Ca

pa

city

Voltage115230

Rating50mfd, 370vac15mfd, 440vac

Stock No.SK6405-7-15SK6405-7-14

AC Motor Capacitors

TA500


7.5 (DC Motor)

ø2.5 (DC Motor)



1000 Pound CapacitySeries TA1000

Specifications

1000 P

ou

nd

Ca

pa

cit

y

TAL10-1A20115 VAC (60 Hz) with Limit Switches

TAP10-1A20115 VAC (60 Hz) with Limit Switches

and Potentiometer

TAL10-2A20220/230 VAC (50/60 Hz) with Limit

Switches

TAP10-2A20220/230 VAC (50/60 Hz) with Limit Switches

and Potentiometer

Model Number

Capacity . . . . . . . . . .

Motor . . . . . . . . . . .


Mounting . . . . . . . . .

Drive . . . . . . . . . . . .


Potentiometer . . . . . . .


1000 lbs (454 Kgf, 4448N), tension or compression

AC - TENV, permanent - split - capacitor design requiring externally mounted motorrun capacitor. (Note: All models use automatically resetting thermal protectors)

Aluminum housing and outer tube, stainless steel translating tube with urethane wiper.Fully sealed and gasketed. Permanently lubricated and maintenance free in normaloperation.

Clevis each end.

All-metal gear drive with self-locking Acme screw. Bronze lifting nut.

Internal, fully adjustable. With terminal strip for all wiring connections.

(TAP models): 5000Ω. Approx. 200Ω per inch change.

-20 to 120°F (-29 to 49°C)


1000 P

ou

nd

Ca

pa

city

Dimensions

TA100

Wiring

Voltage115230

Rating50mfd, 370vac15mfd, 440vac

Stock No.SK6405-7-15SK6405-7-14

AC Motor Capacitors




1000 Pound CapacitySeries TMAL1000-HD

Specifications

1000 P

ou

nd

Ca

pa

cit

y

SPA 3410115 VAC (60 Hz) with Limit Switches


PSPA 3410115 VAC (60 Hz) with Limit Switches

and Potentiometer


and Potentiometer

Model Number


Dimensions


1000 P

ou

nd

Ca

pa

city

TMAL1000-HD

Wiring


NOTES:


NOTES:



1500 Pound CapacitySeries TMAL1500-SP

Specifications

1500 P

ou

nd

Ca

pa

cit

y




and Potentiometer


and Potentiometer

Model Number

115 VAC motor is an enclosed, permanent split capacitorinduction type. Speeds remain approximately constantregardless of the load. The motor is equipped with a ther-mal overload device that opens and resets automatically.The standard motor requires 72-88 mfd capacitor suppliedby Duff-Norton.

220 VAC motor is a totally enclosed, permanent splitcapacitor induction type. Load/no-load speeds areapproximately equal. Equipped with thermal overloaddevice that opens and resets automatically. Standard motorrequires 20 ufd 440VAC, 60/50 Hz metalized polypropy-lene capacitor supplied by Duff-Norton.

- Some actuator surface temperatures may reach 230°F at or near maximum allowable duty cycle.- Do not operate actuator before setting limit switches.- Position hooded vent to prevent moisture and dirt from entering the actuator.- Actuators are not recommended for applications where the unit can be jammed. Examples of jamming include over travel-

ing the limit switches and jamming the nut and screw internally at the extreme ends of the stroke, or driving the actuatoragainst an immovable object causing the actuator to overload severely.

3, 6, 12, 18 and 24 inch75, 150, 300, 450, 610 mmAutomatic reset thermaloverload in motorDual adjustable-20° F. to 120° F Ambient-29° C to 50° CDouble lead screw

Stroke Lengths

Motor Protection

Limit SwitchesTemperature Range

Drive

Aluminum alloy1/2” NPTDouble Clevis190 in lbs.21.47 N-mPotentiometerBi-Directional SpringType

HousingCable EntranceStandard MoutingRestraining Torque

FeedbackBrake

Note:


Dimensions


1500 P

ou

nd

Ca

pa

city

TMAL1500-SP



1500 Pound CapacitySeries TMD1500-SP

Specifications

1500 P

ou

nd

Ca

pa

cit

y

SPD 641512 VDC with Clutch

Model Number

12 VDC motor is a totally enclosed, weather resistant, per-manent magnet type. Magnets act as a secondary brake foradded safety. This type of motor is smaller, cooler running,more efficient and has higher duty cycles than series-wound motors. Lower current draw provides for longerbattery life. The motor is also equipped with a thermaloverload device that opens and resets automatically. Therotation is reversible by reversing the two color codedleads, and torque is the same in either direction.

3, 6, 12, 18 and 24 inch75, 150, 300, 450, 610 mmThermal protectionprovided by fuse-20° F. to 120° F Ambient-29° C to 50° CDouble lead screw

Stroke Lengths

Motor Protection

Temperature Range

Drive

Aluminum alloyLoad Limiting FrictionDiscDouble Clevis190 in lbs.21.47 N-mBi-Directional SpringType

HousingClutch

Standard MoutingRestraining Torque

Brake

- Some actuator surface temperatures may reach 230°F at or near maximum allowable duty cycle.All ratings are nominal and based on the actuator being broken-in for approximately 2500 inches of travel.

Note:

Duff-Norton Controls are also available for the actuator model as follows:- Control Package PDC-1R for SPD 6415

Controls


Dimensions


1500 P

ou

nd

Ca

pa

city

TMD1500-SP



1500 Pound CapacitySeries TMDL1500-SP

Specifications

LSPD 641512 VDC with Limit Switches

Model Number

1500 P

ou

nd

Ca

pa

cit

y


Dimensions


TMDL1500-SP

1500 P

ou

nd

Ca

pa

city



2000 Pound CapacitySeries TMAL2000-SP

Specifications

2000 P

ou

nd

Ca

pa

cit

y




and Potentiometer


and Potentiometer

Model Number

115 VAC motor is an enclosed, permanent split capacitorinduction type. Speeds remain approximately constantregardless of the load. The motor is equipped with a ther-mal overload device that opens and resets automatically.The standard motor requires 72-88 mfd capacitor suppliedby Duff-Norton.

220 VAC motor is a totally enclosed, permanent splitcapacitor induction type. Load/no-load speeds areapproximately equal. Equipped with thermal overloaddevice that opens and resets automatically. Standard motorrequires 20 ufd 440VAC, 60/50 Hz metalized polypropy-lene capacitor supplied by Duff-Norton.

- Some actuator surface temperatures may reach 230°F at or near maximum allowable duty cycle.- Do not operate actuator before setting limit switches.- Position hooded vent to prevent moisture and dirt from entering the actuator.- Actuators are not recommended for applications where the unit can be jammed. Examples of jamming include over travel-

ing the limit switches and jamming the nut and screw internally at the extreme ends of the stroke, or driving the actuatoragainst an immovable object causing the actuator to overload severely.

3, 6, 12, 18 and 24 inch75, 150, 300, 450, 610 mmAutomatic reset thermaloverload in motorDual adjustable-20° F. to 120° F Ambient-29° C to 50° CBall Screw and Nut

Stroke Lengths

Motor Protection

Limit SwitchesTemperature Range

Drive

Aluminum alloy1/2” NPTDouble Clevis190 in lbs.21.47 N-mPotentiometerAutomatic Set SpringType

HousingCable EntranceStandard MoutingRestraining Torque

FeedbackBrake

Note:


Dimensions


2000 P

ou

nd

Ca

pa

city

TMAL2000-SP

TRAVEL + 18.9” (+ .13)

TRAVEL + 16.8” (+ .13)


RModular Actuators

100 to 2000 Pound Capacity

Series M2400 and BM2400

Specifications

Mo

du

lar

Ac

tua

tor

Rotating Machine Screw

M-2462M-2463

Translating Tube Machine Screw

M-2464M-2465

Rotating Ball Screw

BM-2462BM-2463

Translating Tube Ball Screw

BM-2464BM-2465

Model Number


Clevis Accessories

Mo

du

lar A

ctu

ato

r

Ordering Information

Limit Switch

M2400 / BM2400


Rotating

Machine Screw Models

Dimensions

Specifications

Mo

du

lar

Ac

tua

tor

R


Translating Tube

Machine Screw Models

Dimensions

Specifications

Mo

du

lar A

ctu

ato

r

R


Rotating

Ball Screw Models

Dimensions

Specifications

Mo

du

lar

Ac

tua

tor

R


Translating Tube

Ball Screw Models

Dimensions

Specifications

Mo

du

lar A

ctu

ato

r

R


NOTES:


R

Accessories

DPDT Center offmomentaryswitch rated at16 amps (VDC) Max.

1.965”

2.550”

6 ft. Cable

EXTEND

RETRACT

• For use with TMD01, PTD01, TMD02and PTD02 12 VDC and 24 VDC actuators

• NEMA 1 polycarbonate enclosure

• Can be used as a handheld pendant stationor surface mounted

Model No. EM1010-58Extend / Retract Control

Co

ntro

ls

Model No. EM534Reversing Switch

• Use for Forward-Off-Reverse switching ofDC motors

• Switch has momentary action with springreturn to Off

• Rated 15 amps max

• Has built in jumpers for easy 2-wire-in,2-wire-out connection

• #6 screw terminals

• Use with models TMD, PTD, MPD, TAC orother actuators with direct connections tomotor leads


R Electromechanical ActuatorControl Packages

EMCP-1For TMA & TMAL 250/500 lb. Series

AC Units • Standard Speed

Specifications

Co

ntr

ols

BAC-1C115 VAC with Capacitor

BAC-2C220 VAC with Capacitor

Model Number


Dimensions

Wiring Diagrams

Co

ntro

ls

EMCP-1

Model BAC-1C and BAC-2C


R

Electromechanical ActuatorControl Packages

EMCP-2For TMAL 1000 lb. Series

AC units

Specifications

Co

ntr

ols

PAC-1CR115 VAC with Capacitor and Relays

PAC-2CR220 VAC with Capacitor and Relays

Model Number


Dimensions

Wiring Diagrams

Co

ntro

ls

EMCP-2

Model PAC-1CR and PAC-2CR


R


EMCP-3For 1500 lb. and 2000 lb. 115 VAC

AC units

Specifications

Co

ntr

ols

BAC-1115 VAC

Model Number


Dimensions

Wiring Diagrams

Co

ntro

ls

EMCP-3

Model BAC-1 and BAC-2


R


EMCP-4All DC Units

Specifications

Co

ntr

ols

PDC-1R12 VDC with Wired Relays

PDC-2R24 VDC with Wired Relays

Model Number


Dimensions

Wiring Diagrams

Co

ntro

ls

EMCP-4

Model PDC-1R and PDC-2R


R

Dig

ita

l P

osit

ion

In

dic

ato

r

Digital PositionIndicator

The Duff-Norton model SK6300-4K Digital Position Indicator processes a feedback signal from a 1K-ohmto 10K-ohm potentiometer to provide position readout with user selectable scaling factor. By running theactuator to two positions in its stroke and keying in the desired readout at each point, the indicator auto-matically scales the input signal to provide linear readout over the full travel of the actuator. The SK6300-4Khas a universal, 85-250 Vac power input and generates a regulated 24vdc excitation signal to the poten-tiometer. The SK6300-4K operates seamlessly with any potentiometer equipped Duff-Norton actuator.

SK6300-4K

Model Number


R Glossary


R FrequentlyAsked Questions


R FrequentlyAsked Questions


All sales by Seller are made pursuant to the following terms. No other or additional terms or conditions are or will be accepted.

ACCEPTANCE OF ORDERS - All orders, whether placed directly or through an agent, and all subsequent amendments thereto, are subject to a final approval and acceptance by Seller’s main office.

LIMITATION OF WARRANTIES, REMEDIES AND DAMAGES –THE WARRANTY STATED BELOW IS GIVEN IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE OR OTHERWISE. NO PROMISE OR AFFIRMATION OF FACT MADE BY ANY AGENT OR REPRESENTATIVE OF SELLER SHALL CONSTITUTE A WARRANTY BYSELLER OR GIVE RISE TO ANY LIABILITY OR OBLIGATION.

Seller warrants that on the date of its delivery to carrier the goods are free from defects in workmanship and materials.SELLER’S SOLE OBLIGATION IN THE EVENT OF BREACH OF WARRANTY OR CONTRACT OR FOR NEGLIGENCE OR OTHERWISE WITH RESPECT TO GOODS SOLD

SHALL BE EXCLUSIVELY LIMITED TO REPAIR OR REPLACEMENT, F.O.B. SELLER’S POINT OF SHIPMENT, OF ANY PARTS WHICH SELLER DETERMINES TO HAVE BEENDEFECTIVE or if Seller determines that such repair or replacement is not feasible, to a refund of the purchase price upon return of the goods to Seller.

Any action against Seller for breach of warranty, negligence or otherwise must be commenced within one year after such cause of action accrues.NO CLAIM AGAINST SELLER FOR ANY DEFECT IN THE GOODS SHALL BE VALID OR ENFORCEABLE UNLESS BUYER’S WRITTEN NOTICE THEREOF IS RECEIVED

BY SELLER WITHIN ONE YEAR FROM THE DATE OF SHIPMENT.Seller shall not be liable for any damage, injury or loss arising out of the use of the goods if, prior to such damage, injury or loss, such goods are (1) damaged or misused

following Seller’s delivery to carrier; (2) not maintained, inspected, or used in compliance with applicable law and Seller’s written instructions and recommendations; or (3)installed, repaired, altered or modified without compliance with such law, instructions or recommendations.

UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES AS THOSE TERMS ARE DEFINED IN SECTION 2-715OF THE UNIFORM COMMERCIAL CODE.

TERMS OF PAYMENT - Unless otherwise stated herein, payment of each invoice is required within thirty (30) days after date of shipment. Any balance unpaid after the required payment date

shall be subject to a service charge of 1% per month from such date.

PRICE ADJUSTMENTS -Amendments made by the Buyer to orders already placed shall, without formal notice to the Buyer, be subject to extra charges. If the estimated shipping date for the

goods is more than sixty (60) days after date of order, the price of the goods are subject to increase by Seller.

TAXES -Any sales, use, excise, and other taxes applicable to this transaction and the goods and/or services furnished by Seller are not included in the price and shall be paid by

Buyer when due. If Seller pays any such taxes, Buyer shall reimburse Seller upon demand.

INDEMNIFICATION AND SAFE OPERATION -Buyer shall comply with and require its employees to comply with directions set forth in instructions and manuals furnished by Seller and shall use and require its employ-

ees to follow such instructions and manuals and to use reasonable care in the use and maintenance of the goods. Buyer shall not remove or permit anyone to remove anywarning or instruction signs on the goods. In the event of personal injury or damage to property or business arising from the use of the goods, Buyer shall, within forty-eight(48) hours thereafter, give Seller written notice of such injury or damage. Buyer shall cooperate with Seller in investigating any such injury or damage and in the defense of anyclaims arising therefrom.

If Buyer fails to comply with this section or if any injury or damage is caused, in whole or in part, by Buyer’s failure to comply with applicable federal or state safety require-ments, Buyer shall indemnify and hold Seller harmless against any claims, loss or expense for injury or damage arising from the use of the goods.

GOVERNING LAW -This agreement shall be governed by and construed under the laws of the State of New York.

DELIVERY AND DELAYS -Unless otherwise specified herein, deliveries shall be F.O.B. Seller’s point of shipment and risk of loss shall pass to Buyer upon Seller’s delivery to carrier. All shipping

dates are approximate and Seller shall not be liable for loss or damage because of delays occasioned by labor disputes, damage to facilities, or failure of suppliers or subcon-tractors to meet scheduled deliveries or any other cause beyond Seller’s reasonable control or making its performance commercially impracticable.

Not withstanding other provisions hereof, if shipment is delayed at Buyer’s request, the goods shall be deemed to be stored at Buyer’s risk and expense and Seller maythereupon bill Buyer for the full price and storage costs. Buyer shall pay such bill within 30 days after mailing thereof.

BUYER’S INSPECTION UPON RECEIPT OF SHIPMENT - Buyer shall inspect the goods as soon as received. If any loss or damage is discovered, Buyer must notify both the carrier and Seller at once. Seller will cooperate with

Buyer in filing claims with the carrier.

CHANGES AND CANCELLATION -Seller reserves the right to change or cancel any order whenever circumstances require allocation of production or delivery or Seller deems change or cancellation to be

necessary to comply with applicable laws, ordinances, regulations, directives or administrative actions. Seller reserves the right to make changes in materials or design whichit determines appropriate for the goods.

SECURITY INTEREST AND REPOSSESSION -Until full payment has been made therefor, Seller shall have a security interest in goods shipped to Buyer and the goods shall remain personal property. Upon request

Buyer shall execute and deliver to Seller security agreements and financing statements further evidencing Seller’s security interest. Buyer authorizes Seller to file a financingstatement or statements relating to the goods, without Buyer’s signature thereon, as Seller may deem appropriate and appoints Seller as Buyer’s attorney-in-fact for the limit-ed purpose of executing (without requiring Seller to do so) financing statements in Buyer’s name and performing other acts which Seller deems appropriate to perfect andcontinue its security interest and to protect and preserve the goods.

In the event Buyer defaults in making any payment due Seller, Seller in addition to any other rights or remedies provided by law, shall have the right, with or without legalprocess, to enter the place where said goods are located and to repossess the goods in accordance with the Uniform Commercial Code.

ASSURANCES - Shipment by Seller shall at all times be subject to the prior approval of its credit personnel and Seller may, at any time, decline to make shipment except upon receipt of

prior payment or upon other terms and conditions or security satisfactory to such personnel.

PATENTS - Except as to goods manufactured according to design supplied by Buyer, Seller will defend and hold Buyer free and harmless in a suit or proceeding brought against

Buyer insofar as it is based on a claim that use of the goods by Buyer constitutes an infringement of any existing U.S. Patents, provided, however, that Buyer gives Sellerprompt written notice of such suit or proceeding; permits Seller, through its counsel, to defend and/or settle the same; and gives Seller all necessary information, assistanceand authority to enable Seller so to do. If Buyer’s use of the goods is held to constitute infringement and further use is enjoined, Seller shall, at its option, either (i) procure forBuyer the right to continue using the goods; or (ii) replace the goods with non-infringing goods; or (iii) modify the goods to non-infringing goods. The foregoing states Seller’sentire liability for patent infringement and shall not be construed to render Seller liable for damages based on product output.

MISCELLANEOUS -This instrument constitutes the entire agreement between Seller and Buyer, superseding all previous understandings and writings regarding this transaction. Any amend-

ment or modification of this Agreement shall be void unless in writing and signed by Seller.No delay or omission by Seller in exercising any right or remedy hereunder shall be a waiver thereof or of any other right or remedy, and no single or partial exercise there-

of shall preclude any other or further exercise thereof or the exercise of any other right or remedy. All rights and remedies of Seller are cumulative.Sales made pursuant to this Agreement shall be governed by the Uniform Commercial Code as the same may from time to time be construed and in effect in the state

wherein Seller has its main office.

ARBITRATION - All disputes that may arise between the parties regarding the interpretation of the contract and the legal effect of the contract shall, to the exclusion of any court of law, be

arbitrated and determined in accordance with the latest Commercial Arbitration Rules of the American Arbitration Association. The arbitration proceeding shall be held in thecity in that state where the principal office of the Seller is located. The parties recognize and consent to the above mentioned arbitration association’s jurisdiction over eachand every one of them.

USTS rev. 2/98

Terms of SaleSupersedes all previously published terms

Notes

EMCAT3M 1/08

© Duff-Norton 2008

Duff-NortonP.O. Box 7010Charlotte, NC 28241-1070Ph: 800-477-5002 • 704-588-0510Fax: 704-588-1994WebSite: www.duffnorton.comEmail: [email protected]

Documents

Since 1883, Duff-Norton has manufactured quality ... · Since 1883, Duff-Norton has manufactured quality industrial lifting, positioning and material handling equipment. Today, Duff-Norton