Series L-BV2 | L 200 Range 2BV2 060 Compressor (bv2).pdfRange 2BV2 060 Compressor Performance curves for ... The motors are designed according to DIN EN 60 034 / DIN ... EN 10088 -

10

0

m³/h

mbar abs.

1000

mbar abs.

0

kW

20

30

40

50

1200 1400 1600 1800 2000 2200 2400 2600

1000 1200 1400 1600 1800 2000 2200 2400 2600

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V

Discharge pressure p2

The characteristics are valid for the inlet of air with a relative humidity of 50 % and a temperature of 20 °C at a atmospheric pressure of 1013 mbar abs. and water at 15 °C as operating liquid.The tolerance is ± 10 %.

The motors are supplied as standard for the input voltage ranges of 50 and 60 Hz and for the protection category IP55 as well as approbated for UL and CSA. Compressors with ATEX 94/9 EG for category 2G are available, too.

Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft


0.5

1.0

2.0

1.5

1.5 kW

1.75 kW

1.5 kW

1.75 kW

© Gardner Denver Deutschland GmbH 1 Techn. data sheet 2BV2 060, edition 06/2005 En

Data sheet liquidring pump

Series L-BV2 | L_200

Range 2BV2 060 Compressor

Performance curves for compressor operation

ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7

Selection and ordering dataMaterials

Casing/port plate/impeller

Motor data Order-No. Quantity ofoperatingliquid

Soundpressurelevel **

Weightapprox.

Fre-quency

Rated

voltage current output

Hz V A kW m³/h dB(A) kg

3~ 50/60 Hz version, protection class IP 55, insulation class F *

cast iron/ceramic/bronze50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

6.97.1

4.04.1

1.51.75

2BV2060-8NH02-8S0.20.2

6769

21


345Δ...415Δ380Δ...480Δ

4.04.1

1.51.75

2BV2060-8NH02-7S0.20.2

6769

21


500ΔΔ575ΔΔ

2.92.9

1.51.75

2BV2060-8NH02-5S0.20.2

6769

21

Quantity of Operating LiquidFrequency for fresh water operation

at Inlet pressure ***

Hz m³/h

50 0.2

60 0.2

The motors are designed according to DIN EN 60 034 / DIN IEC 34-1 andtemperature class F. For the three phase machines the tolerances are ± 10 % for fixed voltage and ± 5 % for voltage range.For all three phase machines according to UL and CSA norm (UL 507 and CSA 22.2 No. 100) the maximum allowed voltage tolerances are -10 % resp. +6 %. The frequency tolerance is maximum ± 2 %.

All L-BV2 achieve the standards and norms of the low voltage directive 72/23/EWG,L-BV2 achieve the standards and norms of the low voltage directive 72/23/EWG,BV2 achieve the standards and norms of the low voltage directive 72/23/EWG,rotating electrotechnical motor EN 60034-1-34, electromagnetic compatibility (EMC)DIN EN 61000-0/-6/-4.

* For standard UL 507 and CSA 22.2 No 113 (Certificate Number E225239).** Measuring-surface sound-pressure level acc. to DIN EN 21680, measured at a distance of 1 m at medium inlet pressure and with connected pipes.*** The quantities of operating liquid apply for fresh water operation without discharge liquid separator.For partial recirculation operation the quantity of the fresh applied refrigerantcan be reduced by circulation of the operating liquid in a circuit (withdischarge liqiud separator and internal recirculation of the operating liquid,available as accessories).

N1.0 Inlet flangeN2.0 Pressure flangeN3.0 Connection operating liquidN4.2 DrainN8.7 Cavitation protection

2BV2 060-....2-.. a b b1 e g h1 h2 h3 h4 h6 m p1 p2 p3 r

[mm] 457 185 140 100 184 90 117 125 194 37 234 193 216 180 207

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

10 M25 x 1.5 M16 x 1.5 32 110 25 21 G1 x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12

Other voltages2BV72 060-..¨ ..-¨S

50 Hz 60 Hz

3~

185…220 V Δ / 320…380 V YΔ / 320…380 V Y / 320…380 V Y220…240 V Δ / 345…415 V YΔ / 345…415 V Y / 345…415 V Y345…415 V ΔΔ500 V ΔΔ


HHHH

0875

3~ ATEX Category 2G

230 V Δ / 400 V YΔ / 400 V Y / 400 V Y400 V Δ / 690 V YΔ / 690 V Y / 690 V Y500 V ΔΔ

---

DDD

165

---

460 V ΔΔ460 V Y575 V Δ

GGG

615


Dimensions

049

069

061

071

063

036

072 050

070

068

057

051

047

037

002

080

079

035

048

005

006

Exploded drawing

Materials of constructionPart-Nr. Designation Material

002 Casing Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN 1561

005 Pump shaft Chrome steel (X20Cr13 / 1.4021) EN 10088 - 3

006 Feather key Chrome-nickel-molybdenum steel (X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3

035 Mechanical seal Carbon / Ceramic / Viton (FPM) / Chrome-nickel steel

036 Washer Chrome-nickel steel (X10CrNiS 18-9 / 1.4305) EN 10088 - 3

037 Set screw Chrome-nickel-molybdenum steel (X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2

047 Impeller Cast aluminium bronze (G-CuAl10Fe5Ni5 / CC33G-GS) EN 1982

048 Tolerancering for impeller Chrome-nickel steel (X12CrNi 17-7 / 1.4310) EN 10088 - 2

049 Port plate Ceramic - C221 EN 60672 - 1

050 Valve plate Teflon (PTFE)

051 Intercepting plate Chrome-nickel-molybdenum steel (X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2

057 Gasket for cover Nitrile-butadiene-caotchouc (NBR)

061 Cover Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN1561

063 Screw Steel (DIN ISO 8992)

068 Plug screw Machining steel, lead alloyed (11SMnPb30 / 1.0718) EN 10087

069 Sealing ring Teflon (PTFE)

070 O-Ring FPM (flour rubber)

071 Pipe of cavitation protection Chrome-nickel-molybdenum steel (X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 3

072 Washer for cavitation protection Chrome-nickel steel (X5CrNi 18-10 / 1.4301) EN 10088 - 3




Gardner Denver Schopfheim GmbH Gardner Denver Deutschland GmbH

Elmo Rietschle is a brand of theGardner Denver Blower Division

Roggenbachstraße 5879650 Schopfheim - Germany

Industriestraße 2697616 Bad Neustadt - Germany

[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000

Changes in particular the quoted performance curve, datas and weights without prior notice. The figures are without obligations.

10

0

m³/h

10 20 40 60 100 200 400 600 1000

mbar abs.

10 20 40 60 100 200 400 600 1000

mbar abs.

0

kW

20

30

40

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V

Inlet pressure p1

Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft

Inlet pressure p1

0.3

0.6

0.9

1.2

1.5




Range 2BV2 060 Vacuum pump

Performance curves for vacuum operation

Vacuum pumps of the L-BV2 range are suitable for evacuating gases and wet vapours down to inlet pressures of 33 mbar abs.(97% vacuum). All these vacuum pumps are equipped with built-in cavitation protection. For operation below 80 mbar abs. the cavita-tion protection should be connected to protect the vacuum pump.All pumps L-BV2 are especially space-saving in their monoblock design. They are available in cast iron (standard color RAL 9006). The motor is painted as standard in RAL 9006.

The motors are supplied as standard for the input voltage ranges of 50 and 60 Hz and for the protection category IP55 as well as approbated for UL and CSA. Vacuum pumps with ATEX 94/9 EG for category 2G are available, too.The characteristics are valid for the inlet of air with a relative humidity of 100 % and a temperature of 20 °C, compression to 1013 mbar abs. and water at 15 °C as operating liquid. The tolerance is ± 10 %.

ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7



Motor data Ser-vice-factor

Order-No. Quantity ofoperatingliquid


Weightapprox.

Fre-quency

Rated


Hz V A kW SF m³/h dB(A) kg



200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

4.95.1

2.852.95

0.811.3

1.361.0

2BV2060-0NH01-8S0.20.2

6265

20


345Δ...415Δ380Δ...480Δ

2.852.95

0.811.3

1.361.0

2BV2060-0NH01-7S0.20.2

6265

20


500ΔΔ575ΔΔ

2.652.6

0.811.3

1.361.0

2BV2060-0NH01-5S0.20.2

6265

20

Quantity of Operating LiquidFrequency for fresh water operation / partial recirculation Inlet pressure p (abs.) ***

< 200 mbar 200 - 500 mbar > 500 mbar

Hz m³/h m³/h m³/h

50 0.2/0.12 0.2/0.12 0.2/0.12

60 0.2/0.12 0.2/0.12 0.2/0.12

Max. add. water carry-over or permissible back pressure

Frequencymax. additionaladditionalwater carry-over

max. permissiblepermissibleback pressure

Hz m³/h mbar abs.

50 0.5 1200

60 0.5 1200



* For standard UL 507 and CSA 22.2 No 113 (Certificate Number E225239).** Measuring-surface sound-pressure level acc. to DIN EN 21680, measured at a distance of 1 m at medium inlet pressure and with connected pipes.*** The quantities of operating liquid apply for fresh water operation without discharge liquid separator.For partial recirculation operation the quantity of the fresh applied refrigerantcan be reduced by circulation of the operating liquid in a circuit (withdischarge liqiud separator and internal recirculation of the operating liquid,available as accessories).An inlet pressure of 10 mbar abs. can be achieved by connecting a gas ejector (seeaccessories). The gas ejector can be mounted directly onto the vacuum pump.



[mm] 402 185 125 100 152 80 107 115 184 27 221 177 200 161 194

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

9.5 M25 x 1.5 M16 x 1.5 32 110 25.5 21 G1 x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12


50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165


Dimensions

049

069

061

071

063

036

072 050

070

068

057

051

047

037

002

080

079

035

048

005

006

Exploded drawing

Materials of constructionPart-Nr. Designation Material

002 Casing Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN 1561

005 Pump shaft Chrome steel (X20Cr13 / 1.4021) EN 10088 - 3

006 Feather key Chrome-nickel-molybdenum steel (X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3

035 Mechanical seal Carbon / Ceramic / Viton (FPM) / Chrome-nickel steel

036 Washer Chrome-nickel steel (X10CrNiS 18-9 / 1.4305) EN 10088 - 3

037 Set screw Chrome-nickel-molybdenum steel (X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2

047 Impeller Cast aluminium bronze (G-CuAl10Fe5Ni5 / CC33G-GS) EN 1982

048 Tolerancering for impeller Chrome-nickel steel (X12CrNi 17-7 / 1.4310) EN 10088 - 2

049 Port plate Ceramic - C221 EN 60672 - 1

050 Valve plate Teflon (PTFE)

051 Intercepting plate Chrome-nickel-molybdenum steel (X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2

057 Gasket for cover Nitrile-butadiene-caotchouc (NBR)

061 Cover Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN1561

063 Screw Steel (DIN ISO 8992)



070 O-Ring FPM (flour rubber)

071 Pipe of cavitation protection Chrome-nickel-molybdenum steel (X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 3

072 Washer for cavitation protection Chrome-nickel steel (X5CrNi 18-10 / 1.4301) EN 10088 - 3








[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


10

0

m³/h

mbar abs.

1000

mbar abs.

0

kW

20

30

40

50

1200 1400 1600 1800 2000 2200 2400 2600

1000 1200 1400 1600 1800 2000 2200 2400 2600

60

70

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V




Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft


0.5

1.0

2.0

1.5

3.0

2.5

2.2 kW

2.55 kW

2.0 kW

1.75 kW

2.2 kW

2.55 kW

2.0 kW

1.75 kW






ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7





Weightapprox.

Fre-quency

Rated





200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

5.97.8

3.44.5

1.752.0

2BV2061-8NH03-8S0.250.25

7072

25


345Δ...415Δ380Δ...480Δ

3.44.5

1.752.0

2BV2061-8NH03-7S0.250.25

7072

25


500ΔΔ575ΔΔ

4.54.55

2.22.55

2BV2061-8NH03-5S0.250.25

7072

25

CrNi steel/ceramic/CrNi steel50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

5.97.8

3.44.5

1.752.0

2BV2061-8MH03-8S0.250.25

7072

25


345Δ...415Δ380Δ...480Δ

3.44.5

1.752.0

2BV2061-8MH03-7S0.250.25

7072

25


500ΔΔ575ΔΔ

4.54.55

2.22.55

2BV2061-8MH03-5S0.250.25

7072

25



Hz m³/h

50 0.25

60 0.25






[mm] 475 181 140 100 184 90 118 126 195 37 253 195 218 180 226

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

10 M25 x 1.5 M16 x 1.5 32 110 25 21 G1 x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12


50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165

---

460 V ΔΔ460 V Y575 V Δ

GGG

615


Dimensions

049

069

061

071

063

036

072 050

070

068

057

051

047

037

002

080

079

035

048

005

006

Exploded drawing

Materials of constructionPart-Nr. Designation Material combination

cast iron/ceramic/bronze CrNi steel/ceramic/CrNi steel

002 Casing Grey cast iron(EN-GJL HB 195 / EN-JL2030) EN 1561

Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 / 1.4408) EN 10213-4

005 Pump shaft Chrome steel(X20Cr13 / 1.4021) EN 10088 - 3

Chrome steel(X20Cr13 / 1.4021) EN 10088 - 3

006 Feather key Chrome-nickel-molybdenum steel(X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3

Chrome-nickel-molybdenum steel(X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3

035 Mechanical seal Carbon / ceramic / Viton (FPM) / chrome- nickel steel(EN 12756 - BVVGG)

Carbon / ceramic / Viton (FPM) / chrome- nickel steel(EN 12756 - BVVGG)

036 Washer Chrome-nickel steel(X10CrNiS 18-9 / 1.4305) EN 10088 - 3

Chrome-nickel steel(X10CrNiS 18-9 / 1.4305) EN 10088 - 3

037 Set screw Chrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2

Chrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2

047 Impeller Cast aluminium bronze(G-CuAl10Fe5Ni5 / CC33G-GS) EN 1982


048 Tolerancering for impeller Chrome-nickel steel(X12CrNi 17-7 / 1.4310) EN 10088 - 2

Chrome-nickel steel(X12CrNi 17-7 / 1.4310) EN 10088 - 2

049 Port plate Ceramic - C221 EN 60672 - 1 Ceramic - C221 EN 60672 - 1

050 Valve plate Teflon (PTFE) Teflon (PTFE)

051 Intercepting plate Chrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2

Chrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2

057 Gasket for cover Nitrile-butadiene-caotchouc (NBR) ISO 1629 Viton (FPM)

061 Cover Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN1561Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 / 1.4408) EN 10213-4

063 Screw Steel (DIN ISO 8992) Steel (DIN ISO 8992)

068 Plug screw Machining steel, lead alloyed(11SMnPb30 / 1.0718) EN 10087


069 Sealing ring Teflon (PTFE) Teflon (PTFE)

070 O-Ring FPM (flour rubber) FPM (flour rubber)

071 Pipe of cavitation protection Chrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 3


072 Washer for cavitation protection Chrome-nickel steel(X5CrNi 18-10 / 1.4301) EN 10088 - 3










[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


10

0

m³/h

10 20 40 60 100 200 400 600 1000

mbar abs.

10 20 40 60 100 200 400 600 1000

mbar abs.

0

kW

20

30

40

50

60

70

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V

Inlet pressure p1

Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft

Inlet pressure p1

0.5

1.0

1.5

2.0

2.5








ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7






Weightapprox.

Fre-quency

Rated





200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

5.97.8

3.44.5

1.452.0

1.211.0

2BV2061-0NH03-8S0.230.23

6569

25


345Δ...415Δ380Δ...480Δ

3.44.5

1.452.0

1.211.0

2BV2061-0NH03-7S0.230.23

6569

25


500ΔΔ575ΔΔ

4.54.55

1.452.0

1.521.28

2BV2061-0NH03-5S0.230.23

6569

25


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

5.97.8

3.44.5

1.452.0

1.211.0

2BV2061-0MH03-8S0.230.23

6569

25


345Δ...415Δ380Δ...480Δ

3.44.5

1.452.0

1.211.0

2BV2061-0MH03-7S0.230.23

6569

25


500ΔΔ575ΔΔ

4.54.55

1.452.0

1.521.28

2BV2061-0MH03-5S0.230.23

6569

25


< 200 mbar 200 - 500 mbar > 500 mbar


50 0.23/0.12 0.23/0.12 0.23/0.12

60 0.23/0.12 0.23/0.12 0.23/0.12




Hz m³/h mbar abs.

50 0.57 1200

60 0.57 1200






[mm] 475 181 140 100 184 90 118 126 195 37 253 195 218 180 226

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

10 M25 x 1.5 M16 x 1.5 32 110 25 21 G1 x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12


50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165

---

460 V ΔΔ 460 V Y575 V ΔΔ

GGG

615


Dimensions

049

069

061

071

063

036

072 050

070

068

057

051

047

037

002

080

079

035

048

005

006

Exploded drawing

Materials of constructionPart-Nr. Designation Material combination

cast iron/ceramic/bronze CrNi steel/ceramic/CrNi steel

002 Casing Grey cast iron(EN-GJL HB 195 / EN-JL2030) EN 1561


005 Pump shaft Chrome steel(X20Cr13 / 1.4021) EN 10088 - 3

Chrome steel(X20Cr13 / 1.4021) EN 10088 - 3

006 Feather key Chrome-nickel-molybdenum steel(X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3


035 Mechanical seal Carbon / ceramic / Viton (FPM) / chrome- nickel steel(EN 12756 - BVVGG)

Carbon / ceramic / Viton (FPM) / chrome- nickel steel(EN 12756 - BVVGG)

036 Washer Chrome-nickel steel(X10CrNiS 18-9 / 1.4305) EN 10088 - 3

Chrome-nickel steel(X10CrNiS 18-9 / 1.4305) EN 10088 - 3

037 Set screw Chrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2


047 Impeller Cast aluminium bronze(G-CuAl10Fe5Ni5 / CC33G-GS) EN 1982


048 Tolerancering for impeller Chrome-nickel steel(X12CrNi 17-7 / 1.4310) EN 10088 - 2


049 Port plate Ceramic - C221 EN 60672 - 1 Ceramic - C221 EN 60672 - 1

050 Valve plate Teflon (PTFE) Teflon (PTFE)

051 Intercepting plate Chrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2


057 Gasket for cover Nitrile-butadiene-caotchouc (NBR) ISO 1629 Viton (FPM)

061 Cover Grey cast iron (EN-GJL HB 195 / EN-JL2030) EN1561Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 / 1.4408) EN 10213-4

063 Screw Steel (DIN ISO 8992) Steel (DIN ISO 8992)




070 O-Ring FPM (flour rubber) FPM (flour rubber)

071 Pipe of cavitation protection Chrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 3


072 Washer for cavitation protection Chrome-nickel steel(X5CrNi 18-10 / 1.4301) EN 10088 - 3










[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


0

m³/h

mbar abs.

1000

mbar abs.

0

kW

20

40

1400 1800 2200 2600 3000 3400 3800

60

80

100

120

2

4

6

8

1000 1400 1800 2200 2600 3000 3400 3800

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V




Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft


3.0 kW

6.3 kW

5.5 kW

5.5 kW

6.3 kW

3.0 kW






ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7





Weightapprox.

Fre-quency

Rated




cast iron/ceramic/bronze 50 200Δ...240Δ 345Y...415Y 12.5 7.2 3.0 2BV2070-8NH01-8S 0.5 72 35

cast iron/ceramic/bronze 50 500Δ 5.6 3.0 2BV2070-8NH01-5S 0.5 72 35

CrNi steel/ceramic/CrNi steel 50 200Δ...240Δ 345Y...415Y 12.5 7.2 3.0 2BV2070-8PH01-8S 0.5 72 35

CrNi steel/ceramic/CrNi steel 50 500Δ 5.6 3.0 2BV2070-8PH01-5S 0.5 72 35

CrNi steel/CrNi steel/CrNi steel 50 200Δ...240Δ 345Y...415Y 12.5 7.2 3.0 2BV2070-8HH01-8S 0.5 72 35

CrNi steel/CrNi steel/CrNi steel 50 500Δ 5.6 3.0 2BV2070-8HH01-5S 0.5 72 35


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

5.56.3

2BV2070-8NH03-8S0.50.5

7375

70


500ΔΔ575ΔΔ

10.010.0

5.56.3

2BV2070-8NH03-5S0.50.5

7375

70


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

5.56.3

2BV2070-8PH03-8S0.50.5

7375

70


500ΔΔ575ΔΔ

10.010.0

5.56.3

2BV2070-8PH03-5S0.50.5

7375

70

CrNi steel/CrNi steel/CrNi steel50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

5.56.3

2BV2070-8HH03-8S0.50.5

7375

70


500ΔΔ575ΔΔ

10.010.0

5.56.3

2BV2070-8HH03-5S0.50.5

7375

70



Hz m³/h

50 0.5

60 0.5





[mm] a b b1 e g h1 h2 h3 h4 h6 m p1 p2 p3 r

2BV2 070-....1-.. 545 232 196 140 189 100 128 146 222 33 299,5 178 236 201 262

2BV2 070-....3-.. 551 266 216 140 224 133 160 178 254 65 271 240 300 266 233

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

2BV2 070-....1-.. 12 M32 x 1.5 M32 x 1.5 42 110 33 27 G1½ x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12

2BV2 070-....3-.. 14 M32 x 1.5 M32 x 1.5 42 110 33 27 G1½ x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12


50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165

---

460 V ΔΔ460 V Y575 V Δ

GGG

615


Dimensions

072080063 061

057 070 051049

047048

035037

002 005

006

036

050071

069068

079

Exploded drawing

Materials of construction

Part-No.

Designation Material combination

cast iron/ceramic/bronze CrNi steel/ceramic/CrNi steel CrNi steel/CrNi steel/CrNi steel

002 CasingGrey cast iron(EN-GJL HB 195 / EN-JL2030) EN 1561



005 Pump shaftChrome steel(X20Cr13 / 1.4021) EN 10088 - 3



006 Feather keyChrome-nickel-molybdenum steel(X6CrNiMoTi 17-12-2 / 1.4571) EN 10088 - 3



035 Mechanical sealCarbon / Ceramic / Viton (FPM) /Chrome-nickel steel (EN 12756 - BVVGG)

SIC / Carbon / Viton (FPM) / Teflon (PTFE)sheated / Chrome-nickel-molybdenum steel(EN 12756 - Q1BM1GG)


036 WasherChrome-nickel steelX10CrNiS 18-9 / 1.4305 / EN 10088 - 3

Chrome-nickel steelX10CrNiS 18-9 / 1.4305 / EN 10088 - 3


037 Set screwChrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 / 1.4401) EN 10088 - 2


not applicable

047 ImpellerCast aluminium bronze(G-CuAl10Fe5Ni5 / CC33G-GS) EN 1982



048Tolerance ringfor impeller




049 Port plate Ceramic - C221 EN 60672 - 1 Ceramic - C221 EN 60672 - 1Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 / 1.44.08)EN 10213-4

050 Valve plate Teflon (PTFE) Teflon (PTFE) Teflon (PTFE)

051 Intercepting plateChrome-nickel-molybdenum steel(X10CrNiMoTi 18-10 / 1.4571) EN 10088 - 2



057 Gasket for coverNitrile-butadiene-caotchouc (NBR)ISO 1629

Viton (FPM)flat gasket: Teflon (PTFE) and O-ring:silicone-caotchouc / Teflon (PTFE) sheathed

061 CoverGrey cast iron(EN-GJL HB 195 / EN-JL2030) EN1561



063 Screw Steel (DIN ISO 8992) Steel (DIN ISO 8992) Steel (DIN ISO 8992)

068 Plug screwMachining steel, lead alloyed(11SMnPb30 / 1.0718) EN 10087



069 Sealing ring Teflon (PTFE) Teflon (PTFE) Teflon (PTFE)

070 O-Ring FPM (flour rubber) FPM (flour rubber) FEP (Perfluorethylenpropylen) & Silicon

071Pipe of cavitationprotection




072Washer forcavitationprotection







080 Dichtring Teflon (PTFE) Teflon (PTFE) Teflon (PTFE)






[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


0

m³/h

10 20 40 60 100 200 400 600 1000

mbar abs.

10 20 40 60 100 200 400 600 1000

mbar abs.

0

kW

20

40

60

80

100

120

60 Hz50 Hz

60 Hz50 Hz

1.0

2.0

3.0

4.0

Suc

tion

cap

acity

V

Inlet pressure p1

Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft

Inlet pressure p1








ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7






Weightapprox.

Fre-quency

Rated



3~/50/60 Hz version, protection class IP 55, insulation class F*


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

12.512.8

7.27.4

2.353.45

1.251.0

2BV2070-0NH01-8S0.280.34

6570

35


345Δ...415Δ380Δ...480Δ

7.27.5

2.353.45

1.251.0

2BV2070-0NH01-7S0.280.34

6570

35


500ΔΔ575ΔΔ

5.65.6

2.353.45

1.251.28

2BV2070-0NH01-5S0.280.34

6570

35


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

12.512.8

7.27.4

2.353.45

1.251.0

2BV2070-0PH01-8S0.280.34

6570

35


345Δ...415Δ380Δ...480Δ

7.27.5

2.353.45

1.251.0

2BV2070-0PH01-7S0.280.34

6570

35


500ΔΔ575ΔΔ

5.65.6

2.353.45

1.251.28

2BV2070-0PH01-5S0.280.34

6570

35


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

12.512.8

7.27.4

2.353.45

1.251.0

2BV2070-0HH01-8S0.280.34

6570

35


345Δ...415Δ380Δ...480Δ

7.27.5

2.353.45

1.251.0

2BV2070-0HH01-7S0.280.34

6570

35


500ΔΔ575ΔΔ

5.65.6

2.353.45

1.251.28

2BV2070-0HH01-5S0.280.34

6570

35


< 200 mbar 200 - 500 mbar > 500 mbar


50 0.28/0.15 0.28/0.15 0.28/0.15

60 0.34/0.18 0.34/0.18 0.34/0.18




Hz m³/h mbar abs.

50 0.7 1200

60 0.7 1200






[mm] 545 232 196 140 189 100 128 146 222 33 299.5 178 236 201 262

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

12 M32 x 1.5 M32 x 1.5 42 110 33 27 G1½ x 20 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12


50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165

---

460 V ΔΔ 460 V Y575 V ΔΔ

GGG

615


Dimensions

072080063 061

057 070 051049

047048

035037

002 005

006

036

050071

069068

079

Exploded drawing


Part-No.



002 CasingGrey cast iron(EN-GJL HB 195 / EN-JL2030) EN 1561









035 Mechanical sealCarbon / Ceramic / Viton (FPM) /Chrome-nickel steel (EN 12756 - BVVGG)








not applicable













057 Gasket for coverNitrile-butadiene-caotchouc (NBR)ISO 1629


061 CoverGrey cast iron(EN-GJL HB 195 / EN-JL2030) EN1561


























[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


0

m³/h

mbar abs.

1000

mbar abs.

0

kW

30

60

1500 2000 2500 3000 3500 4000

90

120

150

180

2

4

6

8

1000 1500 2000 2500 3000 3500 4000

10

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V




Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft


7.5 kW

8.6 kW

5.5 kW

6.3 kW

7.5 kW

8.6 kW

5.5 kW

6.3 kW

© Gardner Denver Deutschland GmbH 1 Techn. data sheet 2�V2 071, edition 06/2005 EnTechn. data sheet 2�V2 071, edition 06/2005 En





ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7





Weightapprox.

Fre-quency

Rated


Hz V A kW m³/h d�(A) kg

3~ 50/60 Hz version. protection class IP 55. insulation class F *

cast iron/ceramic/bronze5060

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.8ΔΔ20.8ΔΔ

12.0Y12.0Y

5.56.3

2BV2071-8NH04-8S0.70.7

7475

55

cast iron/ceramic/bronze5060

500Δ575Δ

10.010.0

5.56.3

2BV2071-8NH04-5S0.70.7

7475

55

CrNi steel/ceramic/CrNi steel5060

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.8ΔΔ20.8ΔΔ

12.0Y12.0Y

5.56.3

2BV2071-8PH04-8S0.70.7

7475

55

CrNi steel/ceramic/CrNi steel5060

500Δ575Δ

10.010.0

5.56.3

2BV2071-8PH04-5S0.70.7

7475

55

CrNi steel/CrNi steel/CrNi steel5060

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.8ΔΔ20.8ΔΔ

12.0Y12.0Y

5.56.3

2BV2071-8HH04-8S0.70.7

7475

55

CrNi steel/CrNi steel/CrNi steel5060

500Δ575Δ

10.010.0

5.56.3

2BV2071-8HH04-5S0.70.7

7475

55


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

32.0ΔΔ32.0ΔΔ

18.5Y18.5Y

7.58.6

2BV2071-8NH05-8S0.70.7

7677

79


500ΔΔ575ΔΔ

13.012.5

7.58.6

2BV2071-8NH05-5S0.70.7

7677

79


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

32.0ΔΔ32.0ΔΔ

18.5Y18.5Y

7.58.6

2BV2071-8PH05-8S0.70.7

7677

79


500ΔΔ575ΔΔ

13.012.5

7.58.6

2BV2071-8PH05-5S0.70.7

7677

79


200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

32.0ΔΔ32.0ΔΔ

18.5Y18.5Y

7.58.6

2BV2071-8HH05-8S0.70.7

7677

79


500ΔΔ575ΔΔ

13.012.5

7.58.6

2BV2071-8HH05-5S0.70.7

7677

79



Hz m³/h

50 0.7

60 0.7


All L-�V2 achieve the standards and norms of the low voltage directive 72/23/EWG,L-�V2 achieve the standards and norms of the low voltage directive 72/23/EWG,�V2 achieve the standards and norms of the low voltage directive 72/23/EWG,rotating electrotechnical motor EN 60034-1-34, electromagnetic compatibility (EMC)DIN EN 61000-0/-6/-4.



[mm] a b b1 e g h1 h2 h3 h4 h6 m p1 p2 p3 r

2�V2 071-....4-.. 558 266 203 180 224 133 160 178 254 65 278 240 300 265 240

2�V2 071-....5-.. 558 266 203 180 224 133 160 178 254 65 278 240 300 265 240

s2 s3/s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

2�V2 071-....4-.. 14 M32 x 1.5 M32 x 1.5 42 110 33 27 G1½ x 22 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12

2�V2 071-....5-.. 14 M32 x 1.5 M32 x 1.5 42 110 33 27 G1½ x 22 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12

Other voltages2�V2 071-..¨ ..-¨S

50 Hz 60 Hz

3~



HHHH

0875

3~ ATEX Category 2G


---

DDD

165

---

460 V ΔΔ460 V Y575 V Δ

GGG

615


Dimensions

072080063 061

057 070 051049

047048

035037

002 005

006

036

050071

069068

079

Exploded drawing


Part-No.



002 CasingGrey cast iron(EN-GJL H� 195 / EN-JL2030) EN 1561









035 Mechanical sealCarbon / Ceramic / Viton (FPM) /Chrome-nickel steel (EN 12756 - �VVGG)

SIC / Carbon / Viton (FPM) / Teflon (PTFE)sheated / Chrome-nickel-molybdenum steel(EN 12756 - Q1�M1GG)

SIC / Carbon / Viton (FPM) / Teflon (PTFE)sheated / Chrome-nickel-molybdenum steel(EN 12756 - Q1�M1GG)






not applicable













057 Gasket for coverNitrile-butadiene-caotchouc (N�R)ISO 1629


061 CoverGrey cast iron(EN-GJL H� 195 / EN-JL2030) EN1561

























Industriestraße 2697616 �ad Neustadt - Germany

[email protected]

Tel.: +49 7622 392-0Fax: +49 7622 392-300

Tel.: +49 9771 6888-0Fax: +49 9771 6888-4000


0

m³/h

10 20 40 60 100 200 400 600 1000

mbar abs.

10 20 40 60 100 200 400 600 1000

mbar abs.

0

kW

20

40

60

80

100

120

140

160

60 Hz50 Hz

60 Hz50 Hz

Suc

tion

cap

acity

V

Inlet pressure p1

Pow

er r

equi

rem

ent

Pon

the

pum

p s

haft

Inlet pressure p1

1.0

2.0

3.0

4.0

5.0

6.0

7.0

© Gardner Denver Deutschland GmbH 1 �echn. data sheet 2�V2 071�� edition 12�2004 �n�echn. data sheet 2�V2 071�� edition 12�2004 �n





Vacuum pumps of the L-�V2 range are suitable for evacuating gases and wet vapours down to inlet pressures of 33 mbar abs.(97% vacuum). All these vacuum pumps are equipped with built-in cavitation protection. For operation below 80 mbar abs. the cavita-tion protection should be connected to protect the vacuum pump.All pumps L-�V2 are especially space-saving in their monoblock design. �hey are available in cast iron (standard color RAL 9006). �he motor is painted as standard in RAL 9006.

�he motors are supplied as standard for the input voltage ranges of 50 and 60 Hz and for the protection category IP55 as well as approbated for UL and CSA. Vacuum pumps with A��X 94�9 �G for category 2G are available�� too.�he characteristics are valid for the inlet of air with a relative humidity of 100 % and a temperature of 20 °C�� compression to 1013 mbar abs. and water at 15 °C as operating liquid. �he tolerance is ± 10 %.

ab

b1e

g

h1 h2 h3h4

h6

m

p2

p3 p1

rs2

s3s4

s5

w w1

w2 w3

d N1.0N2.0 N3.0

N4.2

N8.7


Casing�port plate�impeller




Weightapprox.

Fre-quency

Rated


Hz V A kW SF m³�h d�(A) kg


cast iron�ceramic�bronze50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

3.856.3

1.41.0

2BV2071-0NH04-8S0.450.45

7276

55


345Δ...415Δ380Δ...480Δ

12.012.0

3.856.3

1.41.0

2BV2071-0NH04-7S0.450.45

7276

55


500ΔΔ575ΔΔ

10.010.0

3.856.3

1.41.0

2BV2071-0NH04-5S0.450.45

7276

55

CrNi steel�ceramic�CrNi steel50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

3.856.3

1.41.0

2BV2071-0PH04-8S0.450.45

7276

55


345Δ...415Δ380Δ...480Δ

12.012.0

3.856.3

1.41.0

2BV2071-0PH04-7S0.450.45

7276

55


500ΔΔ575ΔΔ

10.010.0

3.856.3

1.41.0

2BV2071-0PH04-5S0.450.45

7276

55

CrNi steel�CrNi steel�CrNi steel50 60

200Δ...240Δ220Δ...275Δ

345Y...415Y380Y...480Y

20.820.8

12.012.0

3.856.3

1.41.0

2BV2071-0HH04-8S0.450.45

7276

55


345Δ...415Δ380Δ...480Δ

12.012.0

3.856.3

1.41.0

2BV2071-0HH04-7S0.450.45

7276

55


500ΔΔ575ΔΔ

10.010.0

3.856.3

1.41.0

2BV2071-0HH04-5S0.450.45

7276

55

Quantity of Operating LiquidFrequency for fresh water operation � partial recirculation Inlet pressure p (abs.) ***

< 200 mbar 200 - 500 mbar > 500 mbar

Hz m³�h m³�h m³�h

50 0.45 � 0.25 0.45 � 0.25 0.45 � 0.25

60 0.45 � 0.25 0.45 � 0.25 0.45 � 0.25




Hz m³�h mbar abs.

50 1.12 1200

60 1.12 1200

�he motors are designed according to DIN �N 60 034 � DIN I�C 34-1 andtemperature class F. For the three phase machines the tolerances are ± 10 % for fixed voltage and ± 5 % for voltage range.For all three phase machines according to UL and CSA norm (UL 507 and CSA 22.2 No. 100) the maximum allowed voltage tolerances are -10 % resp. +6 %. �he frequency tolerance is maximum ± 2 %.

All L-�V2 achieve the standards and norms of the low voltage directive 72�23��WG��rotating electrotechnical motor �N 60034-1-34�� electromagnetic compatibility (�MC)DIN �N 61000-0�-6�-4.

* For standard UL 507 and CSA 22.2 No 113 (Certificate Number �225239).** Measuring-surface sound-pressure level acc. to DIN �N 21680�� measured at a distance of 1 m at medium inlet pressure and with connected pipes.*** �he quantities of operating liquid apply for fresh water operation without discharge liquid separator.For partial recirculation operation the quantity of the fresh applied refrigerantcan be reduced by circulation of the operating liquid in a circuit (withdischarge liqiud separator and internal recirculation of the operating liquid��available as accessories).An inlet pressure of 10 mbar abs. can be achieved by connecting a gas ejector (seeaccessories). �he gas ejector can be mounted directly onto the vacuum pump.


2�V2 071-....4-.. a b b1 e g h1 h2 h3 h4 h6 m p1 p2 p3 r

[mm] 558 266 203 180 224 133 160 178 254 65 278 240 300 265 240

s2 s3�s4 s5 w w1 w2 w3 d (N1.0, N2.0) N3.0 N4.2 N8.7

14 M32 x 1��5 M32 x 1��5 42 110 33 27 G1½ x 22 G³⁄8 x 12 G¼ x 12 G³⁄8 x 12

Other voltages2�V2 071-..¨ ..-¨S

50 Hz 60 Hz

3~

185…220 V Δ � 320…380 V YΔ � 320…380 V Y � 320…380 V Y220…240 V Δ � 345…415 V YΔ � 345…415 V Y � 345…415 V Y345…415 V ΔΔ500 V ΔΔ

200…254 V Δ � 345…440 V YΔ � 345…440 V Y � 345…440 V Y220…275 V Δ � 380…480 V YΔ � 380…480 V Y � 380…480 V Y380…480 V ΔΔ575 V ΔΔ

HHHH

0875

3~ ATEX Category 2G

230 V Δ � 400 V YΔ � 400 V Y � 400 V Y400 V Δ � 690 V YΔ � 690 V Y � 690 V Y500 V ΔΔ

---

DDD

165


Dimensions

072080063 061

057 070 051049

047048

035037

002 005

006

036

050071

069068

079

Exploded drawing


Part-No.


cast iron�ceramic�bronze CrNi steel�ceramic�CrNi steel CrNi steel�CrNi steel�CrNi steel

002 CasingGrey cast iron(�N-GJL H� 195 � �N-JL2030) �N 1561

Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 � 1.4408) �N 10213-4


005 Pump shaftChrome steel(X20Cr13 � 1.4021) �N 10088 - 3

Chrome-nickel-molybdenum steel(X6CrNiMo�i 17-12-2 � 1.4571) �N 10088 - 3


006 Feather keyChrome-nickel-molybdenum steel(X6CrNiMo�i 17-12-2 � 1.4571) �N 10088 - 3



035 Mechanical sealCarbon � Ceramic � Viton (FPM) �Chrome-nickel steel (�N 12756 - �VVGG)

SIC � Carbon � Viton (FPM) � �eflon (P�F�)sheated � Chrome-nickel-molybdenum steel(�N 12756 - Q1�M1GG)

SIC � Carbon � Viton (FPM) � �eflon (P�F�)sheated � Chrome-nickel-molybdenum steel(�N 12756 - Q1�M1GG)

036 WasherChrome-nickel steelX10CrNiS 18-9 � 1.4305 � �N 10088 - 3

Chrome-nickel steelX10CrNiS 18-9 � 1.4305 � �N 10088 - 3

Chrome-nickel steelX10CrNiS 18-9 � 1.4305 � �N 10088 - 3

037 Set screwChrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 � 1.4401) �N 10088 - 2

Chrome-nickel-molybdenum steel(X5CrNiMo 17-12-2 � 1.4401) �N 10088 - 2

not applicable

047 ImpellerCast aluminium bronze(G-CuAl10Fe5Ni5 � CC33G-GS) �N 1982



048�olerance ringfor impeller

Chrome-nickel steel(X12CrNi 17-7 � 1.4310) �N 10088 - 2



049 Port plate Ceramic - C221 �N 60672 - 1 Ceramic - C221 �N 60672 - 1Cast chrome-nickel-molybdenum steel(G-X6CrNiMo 18-10 � 1.44.08)�N 10213-4

050 Valve plate �eflon (P�F�) �eflon (P�F�) �eflon (P�F�)

051 Intercepting plateChrome-nickel-molybdenum steel(X10CrNiMo�i 18-10 � 1.4571) �N 10088 - 2

Chrome-nickel-molybdenum steel(X10CrNiMo�i 18-10 � 1.4571) �N 10088 - 2


057 Gasket for coverNitrile-butadiene-caotchouc (N�R)ISO 1629

Viton (FPM)flat gasket: �eflon (P�F�) and O-ring:silicone-caotchouc � �eflon (P�F�) sheathed

061 CoverGrey cast iron(�N-GJL H� 195 � �N-JL2030) �N1561




068 Plug screwMachining steel�� lead alloyed(11SMnPb30 � 1.0718) �N 10087



069 Sealing ring �eflon (P�F�) �eflon (P�F�) �eflon (P�F�)

070 O-Ring FPM (flour rubber) FPM (flour rubber) F�P (Perfluorethylenpropylen) & Silicon









079 Plug screwMachining steel�� lead alloyed(11SMnPb30 � 1.0718) �N 10087



080 Dichtring �eflon (P�F�) �eflon (P�F�) �eflon (P�F�)





Industriestraße 2697616 �ad Neustadt - Germany

[email protected]

�el.: +49 7622 392-0Fax: +49 7622 392-300

�el.: +49 9771 6888-0Fax: +49 9771 6888-4000

Changes in particular the quoted performance curve�� datas and weights without prior notice. �he figures are without obligations.

Documents

Series L-BV2 | L 200 Range 2BV2 060 Compressor (bv2).pdfRange 2BV2 060 Compressor Performance curves for ... The motors are designed according to DIN EN 60 034 / DIN ... EN 10088 -