Upload
margery-butler
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
Senior Design ProjectEt 493
Design of a Two-story Office/Apt
For: Dr. Cris Koutsougeras
Advisor: Mr. R.E. Rode
Prepared by Joshua Price
Abstract
● My project was to designing a two-story office/apartment.
● It required knowledge that was acquired throughout courses in the construction concentration.– Largest concentration being in Autocad
Introduction
● Purpose of this project was to design a building within budget that incorporated certain materials– Design a steel framed building– Most steel being used is steel that I already have– Had to plan the structure to incorporate these materials
● Research on materials– what will be the best materials based on feasibility and
cost
Predesign Phase
● Predesign phase also known as the planning phase– Project was defined based on function and size– First task of this phase was the project definition
● Includes activities, functions, and spaces required– This included approximate sizes and relationships
Project Definition
● Function of building– Serve as an office, pool house, and apartment
● First floor– Includes office, half bath, full bath, and laundry room
● Office will be approximately 25’x20’● Half bath approximately 6’x6’6”● Full bath approximately 6’x14’● Laundry room approximately 6’x14’
Project Definition
● Relationships of first floor– Office will be the front of the building – Bathrooms and laundry room will be on the backside of
the office– Access to the half bath and laundry room will be from
office and outside● Full bath will only have access from outside
Project Definition
● Second floor– Includes bedroom, closet, bathroom, and area for
kitchen, living room, and dining● Bedroom – 15’x15’● Closet – 6’x15’● Bathroom – 13’8”x15”● Remaining area – 39’x35’
Design Phase
● Consists of schematic design stage, design development stage, and construction documents stage– Schematic design
● Bubble/block diagram● Preliminary sketch● Spaces were optimized by laying out the building according to
its uses
Design Phase
● Design Development Stage– Schematic design developed further
● Preliminary working drawings– Includes floor plans and elevations
● Construction Documents stage– Construction drawings developed
● Finalized steel design, stairwells, electrical, etc.
Preconstruction Phase
● Budget/cost analysis– Used to evaluate feasibility and impact of materials and
techniques● Decide between metal or wood framing● Went with wood – prices were close and wood is stronger
● Estimate– Materials and labor broken down to develop projected
cost
● Schedule– Planning of activities
Budget/Cost Analysis
● Budget for Project is $80,000● Estimated total cost is $155,905.18● Due to total running over budget, project will be
broken into phases– Phase 1 – Slab, Structural, and Framing
● Total estimate - $114,705.18● Savings - $34,532.00● New total for Phase 1 - $80,173.18
– Slightly over budget