Upload
matupa
View
222
Download
0
Embed Size (px)
Citation preview
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 1/6
SAMSUNG Proprietary-Contents may change without notice
11. Disassembly and Assembly Instructions
11-1
This Document can not be used without Samsung's authorization
1) Disjoint HANDSET back side 4 points SCREW.
(Pay attention to scratch and damage.)
1) Lifts and separates Rear with picture after
separate all Lockers.
(Takes care and lifts top HooK.)
1) Disjoint HANDSET back side 2 points SCREW.
(Pay attention to scratch and damage.) 1) Separate Main connector and Side Key.
11-1. Disassembly Instructions
1) Disassemble Screws
1) Remove REAR
3
1) Disassemble Screws
4
1) Separate PBA Ass'y and side key
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 2/6
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-2
This Document can not be used without Samsung's authorization
1)Separate shield-Can after SCREW of 2 points
decomposition.1)Separates Keypad from Front.
1) Hinge part beats to strong pin end and disjoints
Front.
1) Separates SCREW CAP and disjoints SCREW.
2) Separate with arrow direction using instrument.
5 6
7 8
1) Remove Shield-Can 1)Remove Keypad
1)e Front1)Remove UPPER and LOWER
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 3/6
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-3
This Document can not be used without Samsung's authorization
1) Speaker and Receiver are detached easily
because there is no Tape, and separates using
tweezers in the case of Motor.
1) Pays attention to back side two faces Tape of
camera and separates camera.
Pays attention to Lower LCD placing area
circumference moisture prevention Tape and
separates LCD Ass'y.
(When separate, pay attention to Con To Con damage)
9
1) MOTOR/SPEAKER/RECEIVER 1) Separate LCD Ass'y
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 4/6
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-4
This Document can not be used without Samsung's authorization
1) Assemble Speaker, Receiver, Motor after
LCD assembly.
(When assemble, pay attention to Con To Con
damage. )
1) Pay attention to both Hook of Lower and
Upper and assembles.
1) Tighten a Screw after Lower assembly.
2) Attach Screw Cap.
1) Assemble Front and LCD Ass'y.
(When assemble, pay attention to hinge and
Con To Con damage)
11-2. Assembly Instructions
2
3 4
LCD Ass'y Front Ass'y
SCREW UP Lower
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 5/6
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-5
This Document can not be used without Samsung's authorization
1)Assemble so that keypad is arrived safe to all
2) In particular, when assemble center of keypad,
take care so that it is same picture and assembles.
1) Tighten a Screw of 3 points as picture after
Shield-Can assembly.
1) Assemble connector and Side Key after
Board safe arrival.1) Tighten Screw 2 points.
5 6
8
Put on the Keypad Shield-Can
Put up SIDE KEY and CON TO CON Assemble Screws
7
8/19/2019 Samsung GT-M2310 11 Disassembly and Assembly Instructions
http://slidepdf.com/reader/full/samsung-gt-m2310-11-disassembly-and-assembly-instructions 6/6
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-6
This Document can not be used without Samsung's authorization
1) When assemble Rear, pay attention to top
portion Hook and assembles with picture.
1) Confirm after Rear safe arrival that all hooks are
combined.
2) Tighten Screw 4 points.
9
Assemble Rear Assemble Screws