Resinas Tulsion Literatures

8/16/2019 Resinas Tulsion Literatures

1/112

STRONG ACID CATION EXCHANGE RESIN SODIUM CYCLETULSION® T-40 is a strong cation exchange resin of polystyrene sulphonated type supplied in sodium

form, specially developed for industrial and domestic softening applications.

TULSION® T-40 has combined properties of high exchange capacity, with excellent physical andchemical properties under varied operating conditions.

GO TO MENU

TULSION ® T-40

http://fullscreen/http://fullscreen/


2/112

TESTING

PACKING

The sampling and testing of ion exchange resins is done as per standard testing procedures, namely

ASTMD-2187 and IS-7330, 1998.

For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at ouroffices. The data included herein are based on test information obtained by Thermax Limited. These data are believed to bereliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are as per BIS/ASTM. Werecommend that the user should determine the performance of the product by testing on own processing equipment.

TYPICAL CHARACTERISTICS – T-40 Na

Type : Strong acid cation exchange resinMatrix structure : Polystyrene copolymerFunctional group : Nuclear SulphonicPhysical form : Moist spherical beadsIonic form : SodiumScreen size U.S.S. (wet) : 16 to 50Particle size (95% min.) : 0.3 to 1.2 mm Total Exchange Capacity : 1.8 Min Meq/mlMoisture content (approx.) : Na + to H + 10%Swelling (approx.) : 53 ± 3 %Backwash settled density : 50 to 52lbs/ft 3 (800 to 830g/l) Thermal stability : 280° F (140° C)pH range : 0 to 14Solubility : Insoluble in all common solvents

For further information, please contact:

THERMAX LIMITEDCHEMICAL DIVISIONAn ISO 9001 Company97-E, GENERAL BLOCK,M.I.D.C. BHOSARI,PUNE 411 026, INDIA TEL. : +91(20) 2712 0181, 2712 0169FAX : +91(20) 2712 0206E-mail : [email protected] : www.thermaxindia.com/chemical

In view of our constant endeavour to improve the quality of our products, we reserve the right to change their specifications without prior notice.

USA Office :THERMAX INC.40440 Grand River Avenue,Novi, Michigan 48375U.S.A. Tel : 248-474-3050Fax : 248-474-5790

T C D / P M G / J a n

‘ 0 6

Super sacks 1000 liters

MS drums 180 liters

HDPE lined bags 25 liters

Super sacks 35 cft

Fiber drums 7 cft

HDPE lined bags 1 cft

GO TO MENU



3/112

STRONG ACID CATION EXCHANGE RESIN – HYDROGEN/SODTULSION® T-42 is a premium quality strong acid cation exchange resin containing nuclear sulphonic acid

groups having high exchange capacity, combined with excellent physical and chemical stability and operatingcharacteristics. It is ideally suited for use in a wide range of pH and temperature conditions.TULSION® T-42 is supplied in hydrogen form for two stages and mixed bed demineralization and in sodiumform for softening. TULSION® T-42 is also used for de-alkalization and chemical processing.

GO TO MENU

TULSION ® T-42

TYPICAL CHARACTERISTICS – TULSION® T-42

Type : Strong Acid Cation Exchange ResinAppearance : Amber color beads.Functional group : Nuclear SulphonicPhysical form : Moist Spherical BeadsIonic form : Hydrogen/Sodium

Screen Size USS (wet) : 16 to 50Particle size (min 95%) : 0.3 to 1.2 mm Total Exchange Capacity (min) : 1.8 meq/ml (H +) & 2.0 meq/ml (Na +)Moisture content : 52 ± 3% (H +) & 45 ± 3% (Na+)Reversible Swelling (%) : Na + -> H+ : 7Backwash settled density : 800 – 840 g/l (50-52 lbs/cft) (H +) &

830 – 870 g/l (52-54 lbs/cft) (Na +) Temperature stability (max) : 280° F / 140° C (Na +) 250° F / 120° C (H+)pH range : 0 to 14Solubility : Insoluble in all common solvents

TYPICAL OPERATING CONDTION – TULSION® T-42

Maximum operating temp. : 120 C (250 F) in H + form140 C (280 F) in Na+ form

Resin bed depth ( minimum) : 600 mm (24")Maximum service flow : 120 m 3 /hr/m 3(15 gpm /ft 3)Backwash expansion space : 40 to 75 %Backwash flow rate for 40 – 70 % expansion : 9 to 25 m 3 /hr/m 3(4 to 10 gpm/ft 2)Regenerant : HCL and H 2SO4 for ‘H’ form and NaCl for ‘Na’formRegeneration level : 30 - 160 g HCl/l (1.9 to 1.0 lbs HCl/ft 3)

40 - 250 g H 2SO4 /l (2.5 to 15.6 lbs HCl/ft3)

60 - 160 g NaCl/l (3.7 to 1.0 lbs HCl/ft 3)Regenerant concentration : 1.5 to 5% for H 2SO4, 3.0 to 5.0% HCl &

5.0 – 15.0% NaClRegenerant flow rate : 2 to 16 m 3 /hr/m 3 (0.25 to 2 gpm/ft 3)Regeneration time : 20 to 60 minutesRinse flow rate : Slow : At regeneration flow rate

: Fast At service flow rateRinse Volume : 3 to 5 M 3 /M3 (25 to 40 gal/ft

3)



4/112






‘ 0 6

GO TO MENU

PACKING


TESTING

The sampling and testing of ion exchange resins is done as per standard testing procedures, namelyASTMD-2187 and IS-7330, 1998.

10.09.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.00.90.80.70.60.5

4 5 6 7 8 9 10 20 30 40 50 60 80 100

FLOW RATE m 3 /hr /m 2

FIG. 1 PRESSURE LOSS

p s i / f t

4.0

3.2

2.4

1.6

0.8

0.4

0.3

0.2

0.1

(41 0 F)

25 0 C(77 0 F)

40 0 C(104 0 F)

US gpm/ft 2

P R E S S U R E D R O P m

H 2

O / m

B E D D E P T H

8.020.0

0

2 3 4 8 12 16 24 32 40

5 0 C

B E D E X P A N S I O N %

O F B E D D E P T H

10 0

80

60

40

200 10 20 3 0 40

BACKWASH FLOW RATE m 3 /hr /m 2

FIG. 2 BACKWASH AND BED EXPANSION

US gpm/ft

2 3 8 12 16

5 0C 25 0 C 40 0 C(41 0 F) (77

0 F) (104 0F)

2

HYDRAULIC CHARACTERISTICS

Free chlorine : Not traceable Turbidity : Less than 2 NTUIron and heavy metals : Less than 0.1 ppm

INFLUENT LIMITATION


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




5/112

PREMIUM STRONG ACID CATION EXCHANGE RESINTULSION® T-52 is a premium quality strong acid cation exchange resin, having excellent resistance to oxidizing

agents for use in industrial water softening, demineralization, condensate polishing and other process applicationsinvolving rigorous operating conditions. It is a higher crosslinked product.

TULSION® T-52 is produced as moist spherical beads, containing nuclear sulphonic acid groups, having excellentphysical and chemical characteristics. Operating characteristics are virtually similar to those of TULSION® T-52.

GO TO MENU

TULSION ® T-52



6/112


7/112

WEAK ACID CATION EXCHANGE RESINTULSION® CXO-9 is a weak acid cation exchange resin having high exchange capacity, combined with excellent

physical, chemical stability and operating characteristics. The functional group is carboxylic acid. It is suitable forwater demineralization, de-alkalization and selective removal of heavy metals. It is ideally suited for use in a widerange of pH and temperature conditions. It is also used in sodium form for softening of water containing highhardness and high TDS as in oil well water treatment.

GO TO MENU

TULSION ® CXO-9

TYPICAL CHARACTERISTICS – CXO-9

Matrix Structure : Polyacrylic copolymerFunctional Group : CarboxylicPhysical Form : Moist spherical beadsIonic form : Hydrogen/SodiumScreen size U.S.S (wet) : 16 to 50

Particle Size (Min 95 %) : 0.3 to 1.2 mm Total exchange capacity : 4.0 meq/mlSwelling (approx) : H + to Na + 100%Moisture Content (approx) : 62 ± 3% Na + & 47 ± 3% H+

Backwash settled density : 46 to 48 lbs/ft 3 for H+ (730 to 770 g/l): 42 to 44 lbs/ft 3 for Na+ (670 to 710 g/l)

Thermal stability : 210° F (100° C)pH range : 5 to 14Solubility : Insoluble in all common solvents

TYPICAL OPERATING CONDITIONS

Maximum operating temperature. : 100° C (212° F)Resin bed depth (minimum) : 24” (600 mm)Maximum Service flow : 60 m 3 /hr/m 3

Backwash expansion space : 75 to 100 %Backwash expansion flow rate at 25° C (77° F) : 8 to 15 m 3 /hr/m 2

Regenerant : HCL/H 2SO4Regenerant level : 120% of operating capacityRegenerant concentration : 0.7 to 4% for H 2SO4 /2 to 4% for HCLRegeneration time : 20 to 60 minutesRinse flow rate : Slow : At regenerant flow rate

Fast : At service flow rateRinse Volume : 3 to 10 m 3 /m 3



8/112






‘ 0 6

GO TO MENU

PACKING





H 2

O / m

B E D D E P T H

20.0

10.0

5.0

4.0

3.0

2.0

1.0

0.55 10 20 30 40 50 60 70

50

C 250

C

350C

FLOW RATE m 3 /hr/m 2


100

80

60

40

20

0

BACKWASH FLOW RATE m 3 /hr/m 2

FIG. 2 BACKWASH AND BED EXPANSION (Ca +2 FORM)

0 5 10 15 20

5 0C

250C 35

0C

% B

E D E X P A N S I O N

TESTING


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




9/112

HIGH CAPACITY WEAK ACID CATION EXCHANGE RESINTULSION® CXO-12 is a premium quality high capacity weak acid cation exchange resin supplied as moist spherical

beads in the hydrogen form. The functional group of the resin is carboxylic acid.

TULSION® CXO-12 has excellent physical and chemical stability and operating characteristics especially lowerreversible swelling.

It is suitable for water demineralization, de-alkalization and selective removal of heavy metals. It is suited foroperation over wide pH range and temperature conditions. In sodium form this resin is used for softening of watercontaining high hardness and TDS.

GO TO MENU

TULSION ® CXO-12

TYPICAL CHARACTERISTICS – CXO-12

Matrix Structure : Polyacrylic copolymer

Functional Group : CarboxylicPhysical Form : Moist spherical beadsIonic form : HydrogenScreen size U.S.S (wet) : 16 to 50Particle Size (Min 95%) : 0.3 to 1.2 mm Total exchange capacity : 4.2 meq/mlSwelling (approx) : H + to Na + 75% (approx)Moisture Content (approx) : 44 ± 3 % (approx)Backwash settled density : 750 to 790 g/l (47-49 lbs/cft)Maximum operating temperature : 210° F / 100° CpH range : 5 to 14Solubility : Insoluble in all common solvents



10/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.





Regenerant : HCL/H 2SO4Regenerant level : 120% of operating capacityRegenerant concentration : 0.7 to 4% for H 2SO4 /2 to 4% for

HCLRegeneration time : 20 to 60 minutesRinse flow rate : Slow : At regenerant flow rate



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




11/112

HIGH CAPACITY MACROPOROUS WEAK ACID CATION EXCHATULSION® CXO-12 MP is a premium quality high capacity macroporous weak acid cation exchange resin supplied

as moist spherical beads in the hydrogen form. The functional group of the resin is carboxylic acid.

TULSION® CXO-12 MP has excellent physical and chemical stability and operating characteristics especially lowerreversible swelling.

It is suitable for water demineralization, de-alkalization and selective removal of heavy metals. It is suited foroperation over a wide pH range and temperature conditions. In sodiumform this resin is used for softening of water containing high hardness and TDS.

GO TO MENU

TULSION ® CXO-12 MP

TYPICAL CHARACTERISTICS – CXO-12MP

Matrix Structure : Polyacrylic copolymer

Functional Group : CarboxylicPhysical Form : Moist spherical BeadsScreen size U.S.S (wet) : 16 to 50Particle Size (Min 95%) : 0.3 to 1.2 mm Total exchange capacity : 3.8 meq/mlSwelling (approx) : H + to Na + 70% (approx)Moisture Content (approx) : 47 ± 3 % (approx)Backwash settled density : 750 to 790 g/l (47 to 49 lbs/cft)Maximum operating temperature : 210° F / 100° CpH range : 5 to 14Solubility : Insoluble in all common solvents



12/112






‘ 0 6

GO TO MENU

TESTING

PACKING






Regenerant : HCL/H 2SO4Regenerant level : 120% of operating capacityRegenerant concentration : 0.7 to 4% for H 2SO4 /2 to 4% for HCLRegeneration time : 20 to 60 minutesRinse flow rate : Slow : At regenerant flow rate



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




13/112

‘Crack Free’ Strong Base Anion Exchange Resin Type ITULSION® A-23 is a strong base anion exchange resin based on polystyrene matrix, containing quaternary

ammonium Type I group. TULSION® A-23 has excellent chemical and operating characteristics along with excellentphysical properties due to its crack-free nature. TULSION® A-23 has a good operating capacity for weak acids likesilicic and carbonic along with strong mineral acids, when used in water treatment along with strong acid cationexchange resin Tulsion® T-42. It is ideally suited for use in a wide range of pH and temperatures.

TULSION® A-23 is supplied as moist spherical bead in the chloride form with a particle size distribution to providegood kinetics and minimum pressure drop.

GO TO MENU

TULSION ® A-23

TYPICAL CHARACTERISTICS – Tulsion® A-23

Type : Strong base anion exchange resinMatrix structure : Cross-linked polystyreneFunctional group : Quaternary ammonium Type IPhysical form : Moist spherical beadsIonic form : ChlorideScreen Size USS (wet) : 16 to 50Particle size (min 95%) : 0.3 to 1.2 mm Total Exchange Capacity (min) : 1.3 meq/ mlSwelling (approx) : Cl - to OH - 20%Moisture content : 53 ± 3%Backwash settled density : 42 to 44 lbs/ ft 3 (670 to 710 g/l)

Thermal stability °F/ °C : 175/80 Cl -

pH range : 0 to 14Solubility : Insoluble in all common solvents


Maximum operating temp. : 60° C (140° F)Resin bed depth (minimum) : 24” (600 mm)Maximum Service flow : 60 m 3 /hr/m 3


Regenerant : NaOHRegenerant level : 40 to 160g NaOH/lRegenerant concentration : 4 to 5 % NaOHRegeneration time : 30 to 60 minutesRinse flow rate : Slow : At regenerant flow rate




14/112






‘ 0 6

GO TO MENU

PACKING


TESTING


4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5



0 12 24 36 48 60 72

p s i / f t

2.0

1.5

1.2

0.9

0.6

0.3

US gpm/ft2

0 5 10 15 20 25 30

05 C (41 F)0

25 C0

(77 F)0

35 C0

(95 F)0


H 2

O / m

B E D D E P T H

90

80

70

60

50

40

30

20

US gpm/ft 2

0 1 2 3 4 5

5 C0 (41 F)0

25 C0

(77 F)0

35 C0(95 F)

0

% B


0 2 4 6 8 10 12



10



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




15/112

‘PREMIUM GRADE’ STRONG BASE TYPE IANION EXCHANGE RESIN IN SULFITE FORM

GO TO MENU

TULSION ® A-23P (Sulfite)

TULSION® A-23 P (Sulfite) is a porous, premium grade strong base anion exchange resin in sulfite form, based ona polystyrene matrix containing quaternary ammonium Type I groups.

TULSION® A-23 P (Sulfite) is used for oxygen scavenging from boiler feed water streams for use in high-pressureboilers and other process streams where oxygen removal is necessary.



16/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS – TULSION® A-23 P (Sulfite)

Type : Strong base anion exchange resinMatrix structure : Cross linked polystyreneFunctional group : Quaternary ammonium Type IPhysical form : Moist Spherical BeadsIonic form : Sulfite

Screen Size USS (wet) : 16 to 50Particle size : 0.3 to 1.2 mm Total Exchange Capacity : 0.8 meq/ ml (min). Resin has min 90%

sites in sulfite form and less than 2% sitesin chloride form

Max operating temp : 140° F /60° CMoisture content : 65± 3% (approx)Backwash settled density : 42 to 44 lbs/ft 3 (670 to 710 g/l)pH range : 0 to 14Solubility : Insoluble in all common solvents


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




17/112

‘Tough Gel’ Strong Base Anion Exchange Resin Type IITULSION® A-32 is a ‘Tough Gel’ strong base anion exchange resin based on polystyrene matrix

containing quaternary ammonium Type II groups. TULSION® A-32 has excellent physical characteristics due to itscrack-free nature. TULSION® A-32 has slightly lower basicity than Type I resin and as such shows greaterregeneration efficiency and operating capacity at equivalent regeneration levels compared to Type I resins.TULSION® A-32 is recommended where removal of strong as well as weak acids is necessary at high regenerationefficiencies. However, due to slightly lower basicity, silica leakage is marginally higher compared of Type I anionresin when used in two bed systems along with strong acid cation exchanger TULSION® T-42 in hydrogen form. Itis suited for use in a wide range of pH and temperature conditions. The bead surface of TULSION® A-32 is cracksfree and hence it exhibits very high bead trength. TULSION® A-32 is supplied in chloride form.

GO TO MENU

TULSION ® A-32

TYPICAL CHARACTERISTICS – TULSION ®A-32

Type : Strong Base Anion Exchange ResinMatrix structure : Polystyrene CopolymerFunctional group : Quaternary Ammonium Type IIPhysical form : Moist Spherical BeadsIonic form : ChlorideScreen Size USS (wet) : 16 to 50Particle size (95% min) : 0.3 to 1.2 mm Total Exchange Capacity (min) : 1.3 meq/ mlSwelling (approx) : Cl - to OH - 12%Moisture content : 47 ± 3%Max. Temp Stability : 60° C (140° F)Backwash settled density : 43 to 45 lbs/ft 3 (690 to 720 g/l)pH range : 0 to 14Solubility : Insoluble in all common solvent


Maximum operating temp. : 60° C (140° F)Resin bed depth (minimum) : 24” (600 mm)Maximum Service flow : 60 m 3 /hr/m 3Backwash expansion space : 50 to 70 %Backwash expansion flow rate at 25° C (77° F) : 5 to 10 m 3 /hr/m 2Regenerant

NaOHRegenerant level : 40 to 160g NaOH/lRegenerant concentration : 4 to 5 % NaOHRegeneration time : 30 to 60 minutes

Rinse flow rate : Slow : At regenerant flow rateFast At service flow rate

Rinse Volume : 4 to 10 m 3 /m 3



18/112






‘ 0 6

GO TO MENU

PACKING


TESTING



H 2

O / m B E D D E P T H

10

8

6

4

2

00 10 20 30 40

p s i / f t

US gpm/ft 2

10 C0 (50 F)0

25 C0(77 F)0

40 C0

(104 F)0

0 4 8 12 14

4

3

2

1

0

FLOWRATE m 3 /hr/m 2


3 4 5 6 7 8 9 10

% B


90

80

70

60

50

40

US gpm/ft 2

1.5 2.0 2.5 3.0 3.5 4.0

05 C(41 F)0

25 C0

(77 F)0

35 C0

(95 F)0

BACKWASH FLOWRATE m 3 /h r/ m 2


HYRAULIC CHARACTERISTICS


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




19/112

Macroporous Strong Base Type I Anion Exchange ResinTULSION® A-27 MP is a highly efficient and durable strong base Type I macroporous anion exchange resin having

capacity equivalent to gel type anion resin. TULSION® A-27 MP belongs to the second generation macroporous ionexchange resins which have a distinctly different matrix structure from that of the gel type and conventionalmacroporous resins. TULSION® A-27 MP has a controlled pore structure which provides high operating capacitywhen used in demineralization of water along with strong acid cation exchanger TULSION® T-42 in hydrogen formin two bed or mixed bed units. TULSION® A-27 MP is capable of reducing both strong and weak acids to very lowlevels. It is ideally suited for use in a wide range of pH and temperature conditions. TULSION® A-27 MP is suppliedin chloride form.

GO TO MENU

TULSION ® A-27 MP

TYPICAL CHARACTERISTICS – TULSION ®A-27 MP

Type : Macroporous strong base anion exchangeresin

Matrix structure : Polystyrene copolymerFunctional group : Quaternary ammonium Type IPhysical form : Moist Spherical BeadsIonic form : ChlorideScreen Size USS (wet) : 16 to 50Particle size (min 95%) : 0.3 to 1.2 mm Total Exchange Capacity (min) : 1.2 meq/mlSwelling (approx) : Cl - to OH - 9%Moisture content : 58 ± 3%Backwash settled density : 42 to 44 lbs/ft 3 (670 to 710 g/l) Thermal Stability °F/ °C : 175/80pH range : 0 to 14Solubility : Insoluble in all common solvents


Maximum operating temp. : 175° F (80° C)Resin bed depth minimum : 24” (600 mm)Maximum service flow : 7.5 gpm/ft 3 (60 m 3 /hr/m 3)Backwash expansion space : 50 to 70 %Backwash expansion flow rate 77° F (25° C) : 2 to 4 gpm/ft 2 (5 to 10 m 3 /hr/m 2)Regenerant : NaOHRegeneration level : 2.5 to 10 lbs NaOH/ft 3

(40 to 160g NaOH/l)Regenerant concentration : 4 to 8% NaOHRegeneration time : 15 to 60 minutesRinse flow rate Slow : At regeneration flow rate

Fast At service flow rateRinse volume : 30 to 75 gal/ft 3

(4 to 10 m 3 /m 3)



20/112






‘ 0 6

GO TO MENU

PACKING


TESTING


ASTMD-2187 and IS-7330, 1998.

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0.0



0 12 24 36 48 60 72

p s i / f t

2.0

1.5

1.2

0.9

0.6

0.3

US gpm/ft 2

05 C (41 F)0

025 C (77 F)0

035 C (95 F)0

5 10 15 20 25 30


H 2

O / m

B E D D E P T H

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0.0



0 12 24 36 48 60 72

p s i / f t

2.0

1.5

1.2

0.9

0.6

0.3

US gpm/ft 2

05 C (41 F)0

025 C (77 F)0

035 C (95 F)0

5 10 15 20 25 30


H 2

O / m

B E D D E P T H

HYDRUALIC CHARACTERISTICS

INFLUENT LIMITATIONS



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




21/112

Macroporous Strong Base Type II Anion Exchange ResinTULSION® A-36 MP is a highly efficient and durable strong base type II macroporous anion exchanger

offering an exceptionally high operating capacity equivalent to gel type anion resin. TULSION® A-36 MPhas slightly lower basicity than Type I resins and as such shows greater regeneration efficiency andoperating capacity at equivalent regeneration levels compared to Type I resins. The macroporous natureof TULSION® A-36 MP ensures consistent long-term performance in demineralization andde-alkalization of water. TULSION® A-36 MP is recommended where removal of strong as well as weak acids is necessary at high regeneration efficiencies. However, due to slightly lower basicity, silica leakageis marginally higher compared to Type I anion resins.

GO TO MENU

TULSION ® A-36 MP


Type : Macro-porous strong base anion exchangeresin

Matrix structure : Polystyrene copolymerFunctional group : Quaternary ammonium Type IIPhysical form : Moist Spherical BeadsIonic form : ChlorideScreen Size USS (wet) : 16 to 50Particle size (min 95%) : 0.3 to 1.2 mm Total Exchange Capacity (min) : 1.2 meq/mlSwelling (approx) : Cl - to OH - 9%Moisture content : 50 ± 3%Backwash settled density : 42 to 44 lbs/ft 3 (670 to 710 g/l) Thermal Stability °F/ °C : 140 / 60pH range : 0 to 14

Solubility : Insoluble in all common solvents


Maximum operating temp. : 145° F (60° C)Resin bed depth minimum : 24” (600 mm)Maximum service flow : 7.5 gpm/ft 3 (60 m 3 /hr/m 3)Backwash expansion space : 50 to 70 %Backwash expansion flow rate 77° F (25° C) : 1 to 4 gpm/ft 2 (3 to 10 m 3 /hr/m 2)Regenerant : NaOHRegeneration level : 2.5 to 10 lbs NaOH/ft 3 (40 to 160g NaOH/l)Regenerant concentration : 4 to 8% NaOH

Regeneration time : 15 to 60 minutesRinse flow rate Slow : At regeneration flow rateFast At service flow rate

Rinse volume : 30 to 75 gal/ft 3

(4 to 10 m 3 /m 3)



22/112






‘ 0 6

GO TO MENU

PACKING


TESTING



H 2

O / m

O F D E B D E P T H

10.0

7.0

6.05.0

4.0

3.0

2.0

1.00.90.80.70.6

0.5

0.4

0.3

0.2

0.14 5 6 7 8 9 10 20 30 40 50 60



p s i / f t

2.8

2.4

2.0

1.60

1.20

0.80

0.40

0.30

0.20

0.15

0.10

0.05

US gpm/ft 2

1.5 2 2.5 3 4 8 12 16 20 24

10 0C (50 0F)

20 0C (68 0 F)

40 0C (104 0 F)

% B


100

90

80

70

60

50

40

30

20

10

0

0 2 4 6 8 10 12 14BACKWASH FLOW RATE m 3 /hr/m 2


US gpm/ft 2

0 1 2 3 4 5 6

10 0C (50 0F)

200C 68

0F)

400C (104 0F)





MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




23/112

Macroporous Weak Base Anion Exchange ResinTULSION® A-2X MP is an extremely durable macro-porous week base anion exchange resin characterized by

tertiary amine groups attached to a styrene divinyl benzene copolymer matrix. It has unique physical structure thatgives it superior kinetics and greater resistance to osmotic shock than gel type weak base anion exchangers.

TULSION® A-2X MP yields exceptionally high operating capacity on caustic soda regeneration and has low rinserequirements. It has a higher resistance to organic matter than gel type anion exchangers. TULSION® A-2X MP issupplied as spherical moist beads in the free base form, ready to use.

GO TO MENU

TULSION ® A-2XMP

TYPICAL CHARACTERISTICS – TULSION ®A-2X MP

Type : Macro-porous weak basic anion exchangeresin

Matrix structure : Polystyrene copolymer

Functional group : Tertiary aminePhysical form : Moist Spherical BeadsIonic form : Free baseScreen Size USS (wet) : 16 to 40Particle size (min 95%) : 0.3 to 1.2 mm Total Exchange Capacity (mm) : 1.5 meq/ mlSwelling (approx) : Free base to Cl - 20%Moisture content : 47±3%Backwash settled density : 40 to 42 lbs/ft 3 (640 to 670 g/l) Temperature stability (max) : 175° F (80° C)pH range : 0 to 9Solubility : Insoluble in all common solvents

TYPICAL OPERATING CONDITIONS – TULSION ®A-2X MP

Maximum operating temperature : 175° F (80° C)Resin Bed depth (minimum) : 24” ( 600 mm )Maximum service flow : 40 m 3 /hr /m 3

Backwash expansion space : 50 – 70 %Backwash expansion flow rate at 77° F (25° C) : 4 – 6 m 3 /hr/m 2

Regenerant : NaOH, Na 2CO3, NH4OHRegeneration level : 120 % of the operating capacity for NaOHRegeneration concentration : 1 to 5 %Regeneration time : 20 to 60 minutesRinse flow rate : Slow : At regeneration flow rate

: Fast At service flow rateRinse volume : 2 to 7 m 3 /m 3



24/112






‘ 0 6

GO TO MENU

PACKING


TESTING


5 8 10 20 40 60

10.08.0

6.0

4.0

2.0

1.0

0.8

0.6

0.4

5 0 C 25 0C

40 0C



L

m

2

m

0 2 6 10 12

100

90

80

70

60

50

40

30

20

10

5 0C 25 0 C 40 0C



B E D E X P A N S I O N %





MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




25/112

High Capacity Weak Base Anion ExchangeResin for High Organic WatersTULSION® A-10X MP is a specially developed, premium grade weak base anion exchange resin based on poly-acrylic matrix containing polyamine functional group having exceptionally high total exchange capacity. It has anexcellent physical and chemical stability for use in water treatments with high organic contents than theconventional weak base resins.

TULSION® A-10X MP has the lowest SBC content as compared to other conventional weak base anions due towhich this resin offers the exceptionally higher operating capacities in plants having Ammonium Hydroxide asregenerant.

TULSION® A-10X MP is supplied as moist robust beads in free base form and specially recommended for plantsusing weak alkali namely NH 4OH as regenerant.

GO TO MENU

TULSION ® A-10X MP

TYPICAL CHARACTERISTICS – A-10X MP

Type : Weak base Anion Exchange resinMatrix Structure : Cross Linked PolyacrylicFunctional Group : PolyamineIonic form supplied : Free BaseScreen Size U.S.S (wet) : 16 to 50Particle size : 0.30 to 1.2 mmUniformity coefficient : Max 1.70 Total Exchange Capacity (min) : 2.50 meq/mlWeak Base Exchange Capacity : 95% minimum

Strong Base Component : 5% MaximumMoisture content : 52 ± 3%Reversible swelling : FB to Cl 23%Max operating temperature : 140° F / 60° CFines Content : Less than 1% through US meshBackwash settled density : 690-720 g/l (43-45 lbs/cft)Suitable pH range : 0 to 9Solubility : Insoluble in all common solvents



26/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL OPERATING CONDITIONS – TULSION ®A-10X MP

Maximum operating temperature : 175° F (80° C)Resin Bed depth (minimum) : 24” ( 600 mm )Maximum service flow : 40 m 3 /hr /m 3

Backwash expansion space : 50 – 70 %Backwash expansion flow rate at 77° F (25° C) : 4 – 6 m 3 /hr/m 2

Regenerant : NaOH, Na 2CO3, NH4OHRegeneration level : 120 % of the operating capacity for NaOHRegeneration concentration : 1 to 5 %Regeneration time : 20 to 60 minutesRinse flow rate : Slow : At regeneration flow rate

: Fast At service flow rateRinse volume : 2 to 7 m 3 /m 3




MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




27/112

Nuclear Grade Mixture Of Strong Acid Cation (Li+ form) Strong BaseAnion (OH- form) Exchange Resin

TULSION® MB-104 is a mixture of strongly acidic cation exchange resin TULSION® T-46 in Lithium form and stronglybasic anion exchange resin TULSION® A- 33 in hydroxide form in stoichiometric equivalent quantities. TULSION®MB-104 is designed for use in circulatory water chemistry control in nuclear power operations. This resin combineshigh capacity with excellent physical properties.

TULSION® MB-104 resins are Nuclear Grade Resins and manufactured using special processing procedures, toproduct material of ultimate purity meeting the exacting demands of the nuclear industry.

GO TO MENU

TULSION ® MB-104



28/112

PACKING


TYPICAL CHARACTERISTICS – MB-104

TULSION® T-46 TULSION® A-33 Type : Strong acid cation exchange resin Strong base anion exchange resinMatrix structure : Cross linked polystyreneFunctional group : Sulphonic acid Quaternary ammonium Type IPhysical form : Moist Spherical BeadsIonic form : Lithium HydroxideScreen Size US S (wet) : 16 to 50Particle size : 0.3 to 1.2 mmFines content : Less than 0.5% passing through

50 US mesh Total exchange capacity : 1.8 meq/ml min of 99% in 1.0 meq/ml min of 90% in

Lithium form Hydroxide form and max of 3% inchloride form

Organic leachable : Less than 0.2 mg KMnO4/ ml ofwet resin

Temperature stability (max) : Maximum 175° F (80° C)Backwash settled density : 44 – 47 (700 – 750) (lbs/cft , g/l)

Bead strength : Average not less than 500 Average not less than 250 g/beadg/bead by Chatillion test by Chatillion testImpurities : Fe not more than 200 ppm

Cu not more than 100 ppmHeavy metals not more than100 ppm



TESTING






‘ 0 6


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft



‘ 0 6

GO TO MENU



29/112

Nuclear Grade Mixed Bed Ion Exchange ResinTULSION® MB-106 is a mixture nuclear grade strongly acidic cation exchange resin TULSION® T-46 in Hydrogen

form and nuclear grade strongly basic anion exchange resin TULSION® A-33 in hydroxide form in stoichiometricequivalent quantities.

TULSION® MB-106 is designed for use in the final polishing of circulating water in the nuclear power industry. These resins combine high capacity with excellent physical properties.

TULSION® MB-106 resin is a Nuclear Grade Resin and manufactured using special processing procedure to producematerial of ultimate purity meeting the exacting demands of the nuclear industry.TULSION® MB-106 is recommended in any non-regenerable mixed bed application where reliable production of the highest quality water is required and where the supplied resin must have an absolute minimum of ionic andnon-ionic contamination.

GO TO MENU

TULSION ® MB-106



30/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.


TYPICAL CHARACTERISTICS – MB-106

TULSION T-46 TULSION A-33 Type : Strong acid cation exchange resin Strong base anion exchange

resinMatrix structure : Polystyrene copolymerFunctional group : Sulphonic acid Quaternary ammonium Type I

Physical form : Moist Spherical BeadsIonic form : Hydrogen HydroxideScreen Size USS (wet) : 16 to 50Particle size : 0.3 to 1.2 mmFines content : Less than 0.5% passing through

50 US mesh Total exchange capacity : 1.8 meq/ml min of 99% in1.0 m 1.0 meq/ml min of 90% in

Hydrogen form Hydroxide form and max of 3%in chloride form

Temperature stability (max) : 175° F (80° C)

Backwash settled density : 44 to 47 lbs/ft 3 (700 to 750 g/l)Organic leachable : Less than 0.2 mg KMnO4/ ml of

wet resinImpurities : Fe not more than 200 ppmCu not more than 100 ppmHeavy metals not more than100 ppm

Bead strength : Average not less than 500 Avg. not less than 250 g/bead byg/bead by Chatillion test Chatillion test



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




31/112

Mixed Bed Ion Exchange for Production of Ultra Pure WaterTULSION® MB-108 (BG) is a mixture of strongly acidic cation exchange resin TULSION® T-46 (Black) in Hydrogen

form and strongly basic anion exchange resin TULSION® A-33 (Gold) in hydroxide form in stoichiometric equivalentquantities (1:1).

TULSION® MB-108 (BG) is designed for use in the production of water of the highest purity applications.TULSION® MB-108 (BG) is the ideal choice for electronic industries which manufacture semi conductors andtelevision tubes etc. This resin combines high capacity with excellent physical properties.

GO TO MENU

TULSION ® MB-108 BG



32/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.


TYPICAL CHARACTERISTICS – MB-108(BG)

TULSION T-46 H TULSION A-33 OH Type : Strong acid cation exchange resin Strong base anion exchange

resinMatrix structure : Cross-linked polystyreneFunctional group : Sulphonic acid Quaternary ammonium Type I



Hydrogen form Hydroxide form and max of 3%in chloride form

Temperature stability (max) : 175° F (80° C)Backwash settled density : 44 to 47 lbs/ft 3 (700 to 750 g/l)Organic leachable : Less than 0.2 mg KMnO4/ ml of

wet resinImpurities : Fe not more than 200 ppm




Super sacks 1000 litersMS drums 180 litersHDPE lined bags 25 liters

Super sacks 35 cftFiber drums 7 cftHDPE lined bags 1 cft



33/112

Mixed Bed Ion Exchange for Production of Ultra Pure WaterTULSION® MB-108 P is a mixture of strongly acidic cation exchange resin TULSION® T-42 in Hydrogen form and

strongly basic anion exchange resin TULSION® A-23 P in hydroxide form in 1:1 volumetric ratio.

TULSION® MB-108 P is designed for use in the production of water of the highest quality.TULSION® MB-108 P is the ideal choice for electronic industries which manufacture semi conductors and televisiontubes etc.

GO TO MENU

TULSION ® MB-108 P



34/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS – MB-108P

TULSION T-42 H TULSION A-23 OH Type : Strong acid cation exchange resin Strong base anion exchange resinMatrix structure : Cross-linked polystyreneFunctional group : Sulphonic acid Quaternary ammonium Type IPhysical form : Moist Spherical Beads

Ionic form : Hydrogen HydroxideScreen Size USS (wet) : 16 to 50Particle size : 0.3 to 1.2 mmFines content : Less than 0.5% passing through


Hydrogen form Hydroxide form and max of 3% inchloride form

Temperature stability (max) : 175° F (80° C)Backwash settled density : 44 to 47 lbs/ft 3 (700 to 750 g/l)Organic leachable : Less than 0.2 mg KMnO4/ ml of






MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




35/112

Mixed Bed Ion Exchange Resin for Production of Ultra Pure WaterTULSION® MB-115 (BG) is a mixture of strongly acidic black cation exchange resin TULSION® T-42 in Hydrogen

form and strongly basic type I anion exchanger resin TULSION® A-23 in hydroxide form in 1:1.5 volume ratioquantities.TULSION® MB-115 (BG) is designed for use in the final polishing for production of ultra pure water.

TULSION® MB-115 (BG) is the ideal choice for electronic industries, which manufacture semi conductors andtelevision tubes etc where ultra pure water is required. This resin combines high capacity with excellent physicalproperties.

GO TO MENU

TULSION ® MB-115 BG



36/112


37/112

Mixed Bed Ion Exchange Resin for Production of Ultra Pure WaterTULSION® MB-115 is a mixture of strongly acidic cation exchange resin TULSION® T-42 in Hydrogen form and

strongly basic type I anion exchanger resin TULSION® A-23 in hydroxide form in 1:1.5 volume ratio quantities.TULSION® MB-115 is designed for use in the final polishing for production of ultra pure water.

TULSION® MB-115 is the ideal choice for electronic industries, which manufacture semi conductors and televisiontubes etc where ultra pure water is required. This resin combines high capacity with excellent physical properties.

GO TO MENU

TULSION ® MB-115



38/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS – MB- 115


resinMatrix structure : Polystyrene copolymerFunctional group : Sulphonic acid Quaternary ammonium Type II



Hydrogen form hydroxide form Temperature stability (max) : 40° CBackwash settled density : 710 to 750 g/lOrganic leachable : Less than 0.2 mg KMnO4/ ml of

wet resin

Impurities : Fe not more than 200 ppmCu not more than 100 ppmBead strength : Average not less than 500 Avg. not less than 300 g/bead by

g/bead by Chatillion test Chatillion testpH range : 0 to 14Solubility : Insoluble in all common solvents


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




39/112

Mixed Bed Ion Exchange Resin for Production of Ultra Pure WaterTULSION® MB-114 is a mixture of strongly acidic cation exchange resin TULSION® T-46 in Hydrogen form and

strongly basic type II anion exchanger resin TULSION® A-32 in hydroxide form in 1:2 volumetric quantities.TULSION® MB-114 is designed for use in the final polishing in production of ultra pure water.

TULSION® MB-114 is the ideal choice for electronic industries, which manufacture semi conductors and televisiontubes etc where ultra pure water is required. This resin combines high capacity with excellent physical properties.

GO TO MENU

TULSION ® MB-114



40/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS – MB- 114


resinMatrix structure : Polystyrene copolymerFunctional group : Sulphonic acid Quaternary ammonium Type II



Hydrogen form hydroxide form Temperature stability (max) : 40° CBackwash settled density : 710 to 750 g/lOrganic leachable : Less than 0.2 mg KMnO4/ ml of


Cu not more than 100 ppmBead strength : Average not less than 500 Avg. not less than 300 g/bead byg/bead by Chatillion test Chatillion test



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




41/112

Strong Acid Cation Exchange ResinTULSION® T-48 is a powder form premium grade strong acid cation exchange resin containing nuclear sulphonic

acid groups having high exchange capacity, combined with excellent physical and chemical stability and operatingcharacteristics. It is ideally suited for use in a wide range of pH and temperature conditions.

TULSION® T-48 is supplied in hydrogen form. This is also used for de-alkalization and chemical processing. It ismainly used in condensate polishing for deploying precoat filter process i.e. candles coated with resin.

GO TO MENU

TULSION ® T-48



42/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.


TYPICAL CHARACTERISTICS – TULSION ®T-48

Type : Strong Acid Cation Exchange ResinAppearance : Amber color beads.Functional group : Nuclear SulphonicPhysical form : Moist Spherical BeadsIonic form : HydrogenScreen Size US mesh : 400-100Particle size (min 95%) : 0.03 to 0.15 mm Total Exchange Capacity (min) : 4.5 meq/gmMoisture content : 53 ± 3% (H +) & 45 ± 3% (Na+)Reversible Swelling (%) : Na + -> H+ : 7Backwash settled density : 800 – 840 g/l (50-52 lbs/cft)(H +) & NA Temperature stability (max) : 320° F / 160° CpH range : 0 to 14Solubility : Insoluble in all common solvents


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




43/112

Strong Acid Cation Exchange Resin for Condensate PolishingTULSION® T-50 is a premium quality strong acid cation exchange resin, containing nuclear sulphonic acid groups

having high exchange capacity, combined with excellent physical and chemical stability used for removal of cationin condensate polishing plant.

TULSION® T-50 is supplied as moist robust beads in hydrogen form and has controlled particle size cut forminimizing pressure loss in high flow column operations. It is also used as cation fraction in mixed bed whereTULSION® TA-100 is used as inert separating media along with anion TULSION® A-21 or TULSION® A-21 MP .

GO TO MENU

TULSION ® T-50



44/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS

Matrix Structure : Polystyrene copolymerFunctional Group : Nuclear SulphonicPhysical Form : Moist spherical beadsIonic form : HydrogenScreen size U.S.S (wet) : 20 to 40Particle Size (85 % min) : 0.42 to 0.85 ( 95 % min ) Total exchange capacity : 1.8 meq/mlMoisture Content (approx) : 52 ± 3%Backwash settled density : 51 to 53 lbs/ft 3 (800 to 840 g/l;) Thermal stability : 250° F / 120° CReverse swelling : Na + to H + 7% approx.pH range : 0 to 14Solubility : Insoluble in all common solvents


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




45/112

Macroporous Strong Acid Cation Exchange ResinTULSION® T-42 MP is a high capacity macro-porous cation exchange resin supplied as moist spherical beads in the

hydrogen/sodium form for use in water softening, de-alkalisation, de-mineralisation, condensate polishing andchemical processing applications. This resin combines the high exchange capacity of a gel type resin like TULSION®T-42 with the exceptional physical and chemical stability of macro-porous resin.

TULSION® T-42 MP can be used most effectively in installations where the system’s aggressiveness does not permitthe use of gel type resin, as in condensate polishing.

GO TO MENU

TULSION ® T-42 MP



46/112






‘ 0 6

GO TO MENU

TESTING

PACKING



TYPICAL CHARACTERISTICS – T-42 MP

Matrix Structure : Polystyrene copolymerFunctional Group : Nuclear SulphonicPhysical Form : Moist spherical beadsIonic form : HydrogenScreen size U.S.S (wet) : 16 to 50Particle Size (Min 95%) : 0.3 – 1.2 mm Total exchange capacity : 1.6 meq/mlSwelling (approx) : Na + to H+ 6%Moisture Content (approx) : 56 ± 3 %(H) / 44 ± 3 %(Na)Backwash settled density : 50 to 52 lbs/ft 3 (800 to 830 g/l) Thermal stability ; 250° F / 120° C (H +)pH range : 0 to 14Solubility : Insoluble in all common solvents


MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




47/112

‘Tough Gel’ Strong Base Type I Anion Exchange Resin for CondensatePolishing and Mixed Bed ApplicationsTULSION® A-21 is a premium quality gel strong base anion exchange resin containing quaternary ammonium TypeI, having high bead strength combined with excellent physical and chemical stability, used in condensate polishingplants or in mixed beds used in demineralization plants.

TULSION® A-21 is supplied as moist robust beads in chloride form and has a controlled particle size cut forminimizing pressure loss in high flow column operations. It is also used as the anion fraction in mixed bed whereTULSION® TA-100 is used as inert separating media along with cation TULSION® T-50 . TULSION® A-21 offerscombined properties of high capacity and excellent resistance to attribution and osmotic shock.

GO TO MENU

TULSION ® A-21



48/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.



Type : Strong Base Anion Exchange ResinMatrix structure : Polystyrene CopolymerFunctional group : Quaternary Ammonium Type IPhysical form : Moist Spherical BeadsIonic form : Chloride/CarbonateScreen Size USS (wet) : 20 to 40Particle size (min 95%) : 0.4 to 0.85 mm (80% min) Total Exchange Capacity (min) : 1.30 meq/ mlSwelling (approx) : Cl - to OH - 20%Moisture content : 53 ± 3%Backwash settled density : 670 to 710 g/l (42-44 lbs/cft) Cl -

Thermal Stability °F/ °C : 175/80 Cl -



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




49/112

Macroporous Strong Base Type I Anion ExchangeResin for Condensate PolishingTULSION® A-21 MP is a premium quality macroporous strong base anion exchange resin containing quaternaryammonium Type I group attached to polystyrene matrix; has high bead strength combining excellent physical andchemical stability and is used in condensate polishing plants.

TULSION® A-21 MP is supplied as moist beads in chloride form and has a controlled particle size cut for minimizingpressure loss in high flow column operations. It is also used as anion fraction in mixed bed where TULSION® TA-100is used as inert separating media along with strong acid cation exchange resin TULSION® T-50 . TULSION® A-21 MPoffers combined properties of high capacity with excellent resistance to attrition and osmotic shock.

GO TO MENU

TULSION ® A-21 MP



50/112






‘ 0 6

GO TO MENU

TESTING

PACKING


ASTMD-2187 and IS-7330, 1998.



Type : Macroporous strong base anion exchange resinMatrix structure : Cross-linked polystyreneFunctional group : Quaternary ammonium Type IPhysical form : Moist Spherical BeadsIonic form : Chloride/CarbonateScreen Size USS (wet) : 20 to 40

Particle size (min 95%) : 0.42 to 0.85 mm (95% min) Total Exchange Capacity (min) : 1.2 meq/ mlSwelling (approx) : Cl - to OH - 10%Moisture content : 58 ± 3%Backwash settled density : 42 to 44 lbs/ft 3 (670 to 710 g/l)

Thermal Stability °F/ °C : 175/80 Cl -



MS drums 180 liters


Super sacks 35 cft

Fiber drums 7 cft




51/112

Strong Base Anion Exchange Resin for condensate polishingTULSION® A-29 is a strong base anion exchange resin based on polystyrene matrix, containing quaternary

ammonium Type I group. TULSION® A-29 is powder form cation has excellent chemical and operatingcharacteristics along with excellent physical properties. TULSION® A-29 has a good operating capacity for weak acids like silicic and carbonic along with strong mineral acids, when used in water treatment along with strong acidcation exchange resin TULSION® A-29 . It is ideally suited for use in a wide range of pH and temperatures.

TULSION® A-29 is supplied as moist powder mainly used for deploying precoat filter process.

GO TO MENU

TULSION ® A-29



52/112






‘ 0 6

GO TO MENU

TESTING

PACKING

The sampling and testing of ion exchange resins is done as per standard testing procedures, namely ASTMD-2187 and IS-7330, 1998.



Type : Strong Base Anion Exchange ResinMatrix structure : Cross-Linked PolystyreneFunctional group : Quaternary Ammonium Type IPhysical form : Moist Spherical BeadsIonic form : ChlorideScreen Size US mesh : 400 - 100Particle size mm (min 95%) : 0.03 to 0.15 Total Exchange Ca

Documents

Resinas Tulsion Literatures