REAR ENGINE RIDER EUROPEAN - web5.vade.ie …dealers.fgm.uk.net/PDFFiles/Snapper/Rear-engine/E281223...Table Of Contents TP 400-5019-02-RE-N REAR ENGINE RIDER Manual No. 06153 SERIES

Parts Manual for

Revision 02,

REAR ENGINE RIDER

SERIES 23

COPYRIGHT © 2004

McDonough, GA, 30253 U.S.A.

TP 400-5019-02-RE-N6/29/2004Manual No. 06153

SNAPPER PRODUCTS, INC.ALL RIGHTS RESERVED.

EUROPEAN

MODELE251023BVEE281123BVEE281223BVEE281323BVEE331523KVE

Table Of Contents

TP 400-5019-02-RE-NManual No. 06153REAR ENGINE RIDER

SERIES 23 3

PAGE GROUP4 WHEELS - FRONT6 WHEELS - REAR8 FRONT END, STEERING PT.1

12 FRONT END, STEERING (Bottle Holder)14 MAIN CASE PT.118 MAIN CASE PT.220 DIFFERENTIAL, R. H. FENDER22 CHAIN CASE, L. H. FENDER24 SMOOTH CLUTCH ASSEMBLY26 MAIN CASE YOKE VIEW28 FUEL TANK & SEAT30 ENGINE & EXHAUST MUFFLER32 DRIVE DISC ASSEMBLY34 THROTTLE CONTROL36 CUTTING DECKS, DEFLECTORS40 RAILS, LIFT ARMS, CAM LIFT42 BLADE STOP PEDALS44 BELTS, BRAKES, INTERLOCK46 SPINDLE48 DECALS PT. 150 DECALS PT. 252 DECALS PT. 354 DECALS PT. 456 ELECTRICAL SYSTEMS (For 11 & 13HP Briggs)58 ELECTRICAL SYSTEMS (Briggs Magneto Ground)60 ELECTRICAL SYSTEMS (Kohler Engine)62 ELECTRICAL SYSTEMS (Kohler Engine View)64 WIRING SCHEMATICS (8, 11 & 13 HP Briggs Engines)66 WIRING SCHEMATICS (15 HP Kohler Engines)68 HARDWARE BAGS72 ACCESSORIES & ATTACHMENTS

WHEELS - FRONT

TP 400-5019-02-RE-NManual No. 06153 REAR ENGINE RIDER

SERIES 234

WHEELS - FRONT

Footnotes:


SERIES 23 5

Part No DescriptionItem Qty Note

1 58943 2 ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2A, 3A, 4, 5 & 6)-- 58944 2 ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2B, 3B, 4, 5 & 6)2A 73563 1 TIRE, 11 x 4.00-4 (Kenda) per front tire ass'y.2B 73564 1 TIRE, 11 x 4.10-4, (Carlisle) per front tire ass'y.3A 17146 1 RIM (For 4.10/3.50 x 4 Tire) per front tire ass'y.3B 73588 1 RIM per front tire ass'y.4 11807 2 BALL BEARING, Flange (3/4” I.D.) per front tire ass'y.5 12234 1 VALVE STEM, Snap In per front tire ass'y.6 14669 1 LUBE Fitting per front tire ass'y.7 10935 2 WASHER, .77 x 1.13 x .06 Flat per front tire ass'y.8 11022 1 HUB CAP per front tire ass'y.9 11032 1 FELT SEAL per front tire ass'y.

10 31038 1 CAP, Dust per front tire ass'y.11 91516 1 COTTER PIN, 5/32 x 1” per front tire ass'y.12 10821 1 TUBE, Inner (For 4.10/3.50 x 4 Tire) per front tire ass'y.

WHEELS - REAR


SERIES 236

WHEELS - REAR

Footnotes:


SERIES 23 7


1 58951 2 ASSEMBLY, Rear Tire & Rim (33” Models) (Includes Items 2A, 3A & 4)-- 52269 2 ASSEMBLY, Rear Tire & Rim (25” Models) (Includes Items 2B, 3B & 4)2A 73584 1 TIRE, 16-6.50 x 8 (33” Models) (per rear tire ass'y)2B 23889 1 TIRE, 16 x 4.80-8 Turf (25” Models) (per rear tire ass'y)3A 17147 1 RIM, Extra Wide (For 16/7.50 x 8 Tire) (33”

Models)(per rear tire ass'y)

3B 17145 1 RIM (4.80/4.00X8) 3 LUG (per rear tire ass'y)4 12234 1 VALVE STEM, Snap In (per rear tire ass'y)5 12332 1 CLAMP, R. H. (for 2” Hose) (used on 8, 10 & 13

HP)(per rear tire ass'y)

-- 14542 1 CLAMP, R. H. (used on 12, 14 & 15 HP) (per rear tire ass'y)6 91502 3 BOLT, 1/2-20 x 3/4” Lug, GR5 (per rear tire ass'y)7 31732 1 BOOT, Right Hand (8 & 10 HP) (per rear tire ass'y)8 11817 1 SEAL (per rear tire ass'y)9 40433 1 HUB, Rear Wheel R. H. (Weldment) (per right rear tire ass'y)

10 23895 1 CAP, Hub (per rear tire ass'y)11 23522 1 CAP, Hub, L. H. (Long Axle) (per left rear tire ass'y)12 40434 1 HUB, Rear Wheel L. H. (Weldment) (per left rear tire ass'y)13 11201 1 NUT, Wheel Bolt 5/16-24 (per rear tire ass'y)14 11035 1 AXLE BOLT, Left Hand (per left rear tire ass'y)15 11013 1 WHEEL BOLT, Right Hand (per right rear tire ass'y)

FRONT END, STEERING PT.1


SERIES 238


Footnotes:


SERIES 23 9


1 58030 1 ASSEMBLY, Steering Wheel (for 5/8” shaft) Includes item 22 23781 1 LOGO, Steering Wheel3 13862 1 ROLL PIN, 1/4 x 1-1/2”4 38243 1 LATCH, Parking Brake5 22449 1 CABLE, Clutch/Brake (54.32” long) used on 25”, 28” & 30” Models-- 74131 1 CABLE, Clutch/Brake (55” long) used on 33" & 42" Models6 90122 2 WASHER, 3/8” Flat SAE7 11815 1 PAD, Pedal8 10694 1 BUSHING, Nylon9 47888 1 WELDMENT, Clutch Pedal

10 10986 4 BEARING, Nylon11 46232 1 WELDMENT, Steering Shaft12 13321 4 BUSHING, Tie Rod13 13023 1 TIE ROD, Left Hand (7.41” long)-- 12541 1 TIE ROD, Left Hand (9.91” long) used on 33" & 42" Models14 41687 1 KING PIN Weldment, Left Hand15 12933 1 TIE ROD, Right Hand (7.41” long)-- 12540 1 TIE ROD, Right Hand (9.91” long) used on 33" & 42" Models16 41688 1 KING PIN Weldment, Right Hand17 54378 1 WELDMENT, Front Axle, Narrow used on 25”, 28” & 30” Models-- 53266 1 WELDMENT, Front Axle, Wide used on 33” Models18 14049 2 FOOT PAD, Short-- 14048 2 FOOT PAD, Long19 15444 1 SPRING, Parking Brake Latch20 90183 2 WASHER, .66 x 1.31 x .09 Flat21 46158 2 BUSHING, Nylon22 11714 1 HAIR PIN 2-1/4”23 23667 1 FOAM COVER, Steering Shaft24 90296 1 PIN, 3/16 x 1” Cotter25 91514 2 WASHER, 3/8” Flat26 90753 1 PIN, 3/16 x 1-1/2” Cotter27 90364 2 PIN, 5/32 x 1” Cotter28 10776 1 RING, 1/2” External Retaining (Heavy Duty)29 10746 2 RING, 5/8” External Retaining30 90365 2 PIN, 1/8 x 3/4” Cotter31 10935 6 WASHER, .77 x 1.13 x .06 Flat32 23671 1 COVER, Steering Shaft36 72648 1 CABLE, Brake (29” long)37 34174 2 CONNECTOR, Cable38 91495 1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR5



SERIES 2310


Footnotes:


SERIES 23 11


39 90372 1 NUT, 1/4-20 Hex Center Lock, GR5 or B

FRONT END, STEERING (Bottle Holder)


SERIES 2312

FRONT END, STEERING (Bottle Holder)

Footnotes:


SERIES 23 13


33 74560 1 HOLDER, Bottle (Wire)34 90913 2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap

(Torx)35 74561 1 BOTTLE, Water

MAIN CASE PT.1


SERIES 2314

MAIN CASE PT.1

Footnotes:


SERIES 23 15


1 53697 1 WELDMENT, Main Case (Standard)-- 53698 1 WELDMENT, Main Case (Commercial) used on E331523KVE Model only2A 30798 2 BUMPER, Rear2B 36367 1 BUMPER (1-Piece) (33” Deck)3 37285 1 FENDER, Left Hand (Standard)

4A 36419 1 GUIDE, Belt used on E331523KVE Model only4B 17653 1 BELT GUIDE 25, 26, 28, 41”5 47189 1 BRACKET, Drive Support6 90595 2 BOLT, 5/16-18 x 3/4” Hex Flange Lock, GR57 10153 2 CAP, Bumper8 90585 6 NUT, 5/16-18 Hex Flange Lock, GR59 10969 1 NUT, 5/16-24 Flange Lock (Large)

10 23676 1 SHIFT LINK, Long11 41384 1 WELDMENT, Shift Arm12 33799 1 CROSS BRACE13 11018 1 SHFT LINK, Short (5/16-24 thread)19 91503 2 HAIR PIN, 3/32 x 1-1/2”21 34299 2 WING, Rear22 22509 1 BUSHING, Pilot23 73735 1 BRACKET, Switch29 90361 14 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap30 90981 2 SCREW, #10-32 x 1/4” Hex Washer Self-Tap31 91296 4 WASHER, 5/16” Flat32 12652 1 CLIP, Wire33 90391 1 WASHER, 5/16” Internal Tooth Lock34 90484 4 SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap35 91513 4 SCREW, 5/16-24 x 1-3/4” Hex Head Cap, GR536 11791 4 RETAINER, 5/16” Bolt37 90206 1 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR538 90793 4 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap39 28200 2 SWIVEL, Adjustable42 91272 7 FASTENER, 1/4” Ratchet47 22486 1 OIL DRAIN, Short48 27972 1 ASSEMBLY, Oil Valve49 74946 1 PLATE, Engine (Kohler Engine) used on E331523KVE Model only50 91315 7 WASHER, .32 x .58 x .08 Split Lock51 77692 1 BOLT, M8-1.25 x 25mm, Self-Tap (Kohler)52 90238 4 SCREW, 5/16-24 x 1” Hex Head Cap, GR553 91297 7 NUT, 5/16-24 Hex, GR554 31100 1 TUBE CLAMP

MAIN CASE PT.1


SERIES 2316

MAIN CASE PT.1

Footnotes:


SERIES 23 17


55 90358 1 SCREW, 5/16-24 x 2-1/2” Hex Head Cap, GR5

MAIN CASE PT.2


SERIES 2318

MAIN CASE PT.2

Footnotes:


SERIES 23 19


14 90196 1 NUT, 5/16-18 Hex, GR 5 or B15 40598 1 WELDMENT, Arm, Shift Handle16 10754 1 SPRING, Shift Detent17 58763 1 ASSEMBLY, Speed Adjustment Latch Includes Spring, Part Number 2629218 59212 1 WELDMENT, Shift Handle20 23656 1 GRIP, Shift Handle24 90037 1 PIN, 3/32 x 3/4” Cotter25 23914 1 PIN, 1/4 x 1-3/4” Tapered Clevis26 19245 1 BUSHING, 3/4 x 1.62 Flange (Nylon)27 31036 2 WASHER, Thrust28 19246 2 BUSHING, 3/4 x I.O. Flange (Nylon)29 90361 14 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap40 28989 1 COVER, Switch-- 73268 1 COVER, Solenoid (Kohler)41 28990 1 COVER, Battery43 15761 1 SHOULDER BOLT, 5/16-1844 73289 1 LEVER, Over-Ride45 91595 1 WASHER, .47 x .92 x .065 Flat46 91298 1 NUT, 5/16-18 Hex Nyloc50 91315 1 WASHER, .32 x .58 x .08 Split Lock53 91297 1 NUT, 5/16-24 Hex, GR5

DIFFERENTIAL, R. H. FENDER


SERIES 2320

DIFFERENTIAL, R. H. FENDER

Footnotes:


SERIES 23 21


1 14401 1 COLLAR, Lock (Includes P/N 90201 Set Screw)2 18822 1 BALL BEARING, Axle (R.H. Fender) used on 33” Models- 13, 14 & 15 HP

2A 12296 1 BEARING, Axle (R. H. Fender) used on 25” & 28” Models- 8, 10 & 13 HP3 10969 1 NUT, 5/16-24 Flange Lock (Large)4 31079 1 WASHER, Thrust5 38067 1 PLATE, Differential6 22115 4 SPACER, Pinion7 21127 4 GEAR, Differential Pinion (12T 12P)8 11072 1 WASHER, Thrust9 51584 1 ASSEMBLY, Drive Hex Tube

10 10988 1 WASHER, Nylon11 10964 1 GEAR, 11 Tooth, 10 Pitch12 10941 1 CHAIN, 46 Pitch (#35 Endless)13 21129 1 SPROCKET, 34T, 3/8P14 10965 1 RING, 1-3/16” External Retaining15 21128 1 SPACER, Differential Case16 12332 2 BOOT CLAMP (for 2” Hose)17 75115 1 BOOT, Oil Seal (Short Axle)18 11024 1 PLUG, 1/2” Cup Insert19 37279 1 CASE, Transmission20 28762 1 GASKET, Transmission Case21 37957 1 FENDER, Right Hand (2.498” Dia. Hole) 33” Deck Ball Bearing Differential Models-- 37280 1 FENDER, R. H. (1.62” Dia. Hole) 25” & 28” Deck Bushing Differential Models22 21158 1 GEAR, 63 Tooth 10 Pitch23 47763 1 ASSEMBLY, Long Axle (Includes Gear) Use only with Short Axle P/N 5739824 74431 1 SPACER, Differential Case25 57398 1 ASSEMBLY, Short Axle, 23T (Includes Gear) Use only with Long Axle P/N 4776326 12333 4 BOLT, 5/16-24 x 1-5/8” Hex Special Lock

(Vibresist)27 11156 2 5/16” O-RING28 11782 2 WASHER, 5/16” Belleville29 90395 1 WASHER, 5/16” External Tooth Lock30 90188 1 WASHER, .34 x .69 x .08 Flat31 11042 1 SCREW, 5/16-24 x 2-5/8” Hex Head Cap32 90361 11 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap33 90362 13 SCREW, 1/4-20 x 5/8” Hex Washer Head Self-

Tap34 32107 1 SPACER, Short Axle35 61017 GREASE, Transmission (24 oz. Required)-- 60411 1 KIT, Differential (Incl. Items 2A & 37280 Fender)-- 60662 1 KIT, Differential (Incl. Items 2 & 37957 Fender)

CHAIN CASE, L. H. FENDER


SERIES 2322

CHAIN CASE, L. H. FENDER

Footnotes:


SERIES 23 23


1 52683 1 ASSEMBLY, Primary Chain Case Includes Items 2 thru 13, 15, 16 & 31 thru 332 41136 1 WELDMENT, Primary Chain Case, Right Hand3 28761 1 GASKET, Primary Chain Case4 11121 2 WASHER, 5/8” Belleville5 10756 2 BEARING, .625 x 1.37 x .4356 18963 1 WELDMENT, Sprocket & Shaft7 10614 1 KEY,#5 Woodruff8 39778 1 CHAIN CASE HALF, Primary9 10942 2 BEARING, Needle

10 11086 2 THRUST WASHER, Nylon11 40355 1 WELDMENT, Hub & Sprocket12 10941 1 CHAIN, 46 Pitch (#35 Endless)13 90307 10 SCREW, 10-24 x 1/2” Hex Washer Self-Tap14 11024 1 PLUG, 1/2” Cup Insert15 22785 1 ROLLER, 1-3/8 Long16 10776 1 RING, 1/2” External Retaining (Heavy Duty)17 37285 1 FENDER, Left Hand (1.628” I. D. Hole) used on 25” & 28” Deck Models-- 37958 1 FENDER, Left Hand (1.744” I. D. Hole) used on 33” Deck Models18 14625 1 COLLAR, Lock (Incl. P/N 90776 Set Screw, 1/4-

20 x 1/4”)used with ball bearing, item 32 only

19 50918 1 BEARING, Left Hand Fender (Includes item 20) used on 25” & 28” Models- 8, 10 & 13 HP20 13324 1 FITTING, Lube, 45 Degree, 3/16” w/Hex21 11070 1 TIE ROD (5/16-24 thread- both ends)22 12332 2 BOOT CLAMP (for 2” Hose)23 75115 1 BOOT, Oil Seal24 11071 1 THRUST WASHER25 11072 1 WASHER, Thrust26 91505 1 NUT, 5/8-18 Hex Nyloc27 10969 1 NUT, 5/16-24 Flange Lock (Large)28 19260 2 O-RING, 1/2 x 5/8”29 23447 1 SPACER, Nylon30 12271 1 WASHER, Shim or quantity as required31 27981 6 WASHER, Shim .625 x .87532 14624 1 BALL BEARING, Left Hand Fender for 33” Deck Models-- 51451 1 ASSEMBLY, Left Hand Fender (Incl. Fender

37958 & Bearing 14624)for 33” Deck Models, 15 HP Engine

33 61017 GREASE, Transmission (Use 2 oz. Maximum)

SMOOTH CLUTCH ASSEMBLY


SERIES 2324

SMOOTH CLUTCH ASSEMBLY

Footnotes:


SERIES 23 25


1 53114 1 ASSEMBLY, Smooth Clutch (Incl. items 2 thru 6) Non-Asbestos2 54243 1 HUB, Driven Disc (assembly)3 53103 1 DISC, Driven (rubber tire bonded to rim)4 14523 1 THRUST WASHER5 32331 1 PLATE, Drive Disc6 90585 4 NUT, 5/16-18 Hex Flange Lock, GR57 52497 1 ASSEMBLY, Brake Lever (Includes brake pad &

rivet)8 12313 1 RING, 3/8” External Retaining9 90303 1 NUT, 1/4-28 Hex Top Lock

10 91294 1 WASHER, .28 x .63 x .06 Flat, GR511 72593 1 SPACER, Brake Arm Pivot12 91504 1 SCREW, 1/4-28 x 1” Hex Head Cap, (Washer

Face) GR513 72406 1 SPRING, Torsional Brake Return14 13885 1 SPRING, Clutch & Brake15 46162 1 LIFT, Yoke16 11048 2 BEARING, Yoke17 11201 2 NUT, 5/16-24 Hex Center Lock18 90238 2 SCREW, 5/16-24 x 1” Hex Head Cap, GR519 91198 1 SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap20 33291 1 COLLAR, Yoke21 11763 2 FENDER WASHER, 5/16”22 73733 1 ARM, Yoke23 90539 2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap24 15464 1 STUD, Clutch Link (3/8-24 thread)25 90390 1 WASHER, 3/8” Internal Tooth Lock26 91630 1 NUT, 3/8-24 Hex, GR5 or B27 47190 1 BRACKET, Slide28 90037 1 PIN, 3/32 x 3/4” Cotter29 14663 2 SLIDE HALF30 14664 1 BOLT, 5/16-18 Shoulder31 90187 1 WASHER, 5/16” Split Lock32 90196 1 NUT, 5/16-18 Hex, GR 5 or B33 90122 2 WASHER, 3/8” Flat SAE34 59068 1 ASSEMBLY, Leaf Spring

MAIN CASE YOKE VIEW


SERIES 2326

MAIN CASE YOKE VIEW

Footnotes:


SERIES 23 27


- - View showing assembled yoke parts

FUEL TANK & SEAT


SERIES 2328

FUEL TANK & SEAT

Footnotes:


SERIES 23 29


1 75071 1 SEAT, Operator (shown) used on 13HP & Higher Models-- 28650 1 SEAT, Operator (not shown) used on 9 thru 11HP Models2 51905 1 ASSEMBLY, Fuel Tank (Includes item 3) used on 9 & 10HP Models-- 52435 1 ASSEMBLY, Fuel Tank with Gauge (Includes

item 3A)used on 12, 14.5 & 15HP Models

3 12515 1 CAP, Fuel Tank3A 19377 1 CAP, Fuel Tank w/Gauge4 76272 1 HOSE, Fuel (1/4” I.D. x 8-1/2” long) used on Briggs 8-14HP-- 12912 1 HOSE, Fuel (1/4” I.D. x 12-1/2” long) used on Kohler Models only-- 41996 1 HOSE, Fuel (1/4” I.D. x 6-1/2” long) used on Kohler Models only5 14359 1 FILTER, Fuel (In-Line)6 29900 4 CLAMP, Fuel Line replaces 12222 clamp7 33377 1 BRACKET, Fuel Tank (Rear)8 91542 2 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx

#T-40)9A 23191 2 KNOB, Seat Adjusting9B 23735 2 KNOB, Seat Adjusting, 5/16-1810 13849 2 SPACER, .33 x .63 x .15611 24507 1 VALVE, Fuel Shut-Off (Accessory)12 91038 2 BOLT, 5/16-18 x 1/2” Hex Flange Nyloc

13A 29211 1 SWITCH, Seat (NC) used on E281123BVE Model only13B 23354 1 SWITCH, Seat (NC)14 77351 1 HOSE, Fuel (1/4” I.D. x 3-1/2” long)15 75018 2 BRACKET, Seat16 91714 4 BOLT, 5/16-18 x 1” Square Neck Carriage, GR517 90672 2 NUT, 5/16-18 Hex Flange Top Lock18 11791 4 RETAINER, 5/16” Bolt

ENGINE & EXHAUST MUFFLER


SERIES 2330

ENGINE & EXHAUST MUFFLER

Footnotes:


SERIES 23 31


-- -- 1 ENGINE, 11HP Briggs (Mod 21A907, Type 0123, Trim E1)

electric start

-- -- 1 ENGINE, 12HP Briggs (Mod 21A907, Type 0123, Trim E1)

electric start

-- -- ENGINE, 13HP Briggs (Mod 21A907, Type 0123, Trim E1)

electric start

-- -- ENGINE, 15HP Kohler (Mod CV15ST, Type PS-41584)

electric start

1 74453 1 MUFFLER w/Heat Shield (Briggs 11 & 13HP)2 90362 2 SCREW, 1/4-20 x 5/8” Hex Washer Head Self-

Tap3 91738 2 SET SCREW, 5/16-18 x 3/4” Socket Head, GR84 19358 1 MUFFLER (Kohler 14 & 15HP)5 15352 1 GASKET, Exhaust6 13849 2 SPACER, .33 x .63 x .1567 91065 1 NUT, 1/4-20 Hex Flange Lock8 74965 1 HEAT SHIELD, Muffler9 90052 2 WASHER, 1/4” Split Lock

10 90290 2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap11 91495 1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR512 24356 1 MUFFLER GUARD, Kohler13 33564 1 BRACKET, Muffler Guard (Kohler)14 91059 1 SCREW, 1/4-20 x 1” Hex Head Cap, GR515 91016 2 SCREW, 1/4-20 x 5/8” Hex Head w/Free

Spinning Washer17 91294 2 WASHER, .28 x .63 x .06 Flat, GR5

DRIVE DISC ASSEMBLY


SERIES 2332

DRIVE DISC ASSEMBLY

Footnotes:


SERIES 23 33


1 74187 1 WELDMENT, 5.25” O.D. Drive Disc used on 33” Deck Models-- 72658 1 WELDMENT, 5.75” O.D. Drive Disc used on 25”, 28”, 30” & 42” Models2 90132 2 SET SCREW, HRSS, 3/8-16 x 3/8”3 10210 1 KEY,1/4” Square x 2” Long

THROTTLE CONTROL


SERIES 2334

THROTTLE CONTROL

Footnotes:


SERIES 23 35


1 22751 1 CONTROL, Throttle (23.6” long) (Briggs Engines)-- 74320 1 CONTROL, Throttle (34.6” long) (Kohler Engines)2 90539 2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap3 33470 1 PLATE, Throttle Control4 90913 2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap

(Torx)

CUTTING DECKS, DEFLECTORS


SERIES 2336


Footnotes:


SERIES 23 37


1 73434 1 COVER, Spindle2 61969 1 DECK, 25” Replacement (Painted deck with

decals)-- 61970 1 DECK, 28” Replacement (Painted deck with

decals)-- 61972 1 DECK, 33” Replacement (Painted deck with

decals)3 58632 1 DEFLECTOR, Discharge (Incl. items 4, 5, 6, 7 &

10)used on 25” Deck Models

-- 57786 1 DEFLECTOR, Discharge (Incl. items 4, 5, 6, 7 & 10)

used on 28” & 33” Deck Models

4 22841 1 DECAL, Danger, (Cut Finger) International Symbol

5 33780 1 HINGE, Deflector6 16341 1 SPRING, Hinge7 26234 1 PIN, Hinge8 91070 1 NUT, 5/16-18 Hex Flange Lock, GR59 90583 1 NUT 1/4-20 Hex Flange Lock

10 26483 2 PUSH NUT, 1/4”11 90612 3 BOLT, 3/8-16 x 3/4” Hex Flange Lock12 91015 2 SCREW, 1/4-20 x 3-1/2” Hex Head w/Free

Spinning Washer13 91296 2 WASHER, 5/16” Flat14 90584 1 BOLT, 1/4-20 x 1/2” Hex Flange Lock15 60480 1 KIT, Air Lift (Includes items 16 thru 19) used on 25”, 28” & 33” Decks16 37723 2 AIR-LIFT (33” Models)17 90228 6 SCREW, 5/16-24 x 11/16” Oval Head Machine18 90391 6 WASHER, 5/16” Internal Tooth Lock19 90223 6 NUT, 5/16-24 Hex20 90392 2 SCREW, 1/2-20 x 1” Hex Head Cap, GR521 90509 2 WASHER, 1/2” Internal Tooth Lock22 90559 2 NUT, 1/2-20 Hex Jam23 91508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR524 91016 4 SCREW, 1/4-20 x 5/8” Hex Head w/Free

Spinning Washer25 91510 3 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR526 16968 1 COVER, 25” Mulcher-- 16983 1 COVER, 28” Mulcher-- 16984 1 COVER, 33” Mulcher27 90613 9 NUT, 3/8-16 Hex Flange Lock28 91518 3 NUT, 3/8-24 Hex Nyloc29 91532 3 SCREW, 3/8-24 x 3-3/4” Hex Head Cap, GR530 19190 3 WHEEL, Gage31 15272 3 SPACER



SERIES 2338


Footnotes:


SERIES 23 39


32 33570 1 BRACKET, Gage Wheel (Front)33 33571 2 BRACKET, Gage Wheel (Rear)34 90731 6 BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR535 91070 8 NUT, 5/16-18 Hex Flange Lock, GR536 90492 2 NUT, 5/16-18 Wing37 16967 1 BLADE, 25” Mulcher-- 16980 1 BLADE, 28” Mulcher-- 16982 1 BLADE, 33” Mulcher38 19518 1 BLADE, 25”-- 19515 1 BLADE, 28”-- 19523 1 BLADE, 33”39 29143 1 BLADE, Ninja, 25”-- 26453 1 BLADE, Ninja, 28”-- 24741 1 BLADE, Ninja, 33”

RAILS, LIFT ARMS, CAM LIFT


SERIES 2340

RAILS, LIFT ARMS, CAM LIFT

Footnotes:


SERIES 23 41


1 91503 2 HAIR PIN, 3/32 x 1-1/2”2 28200 2 SWIVEL, Adjustable3 28728 2 ADJUSTER, Chain (5/16-18 thread)4 90223 2 NUT, 5/16-24 Hex5 90854 1 NUT, 3/8-24 Hex Nyloc6 90122 1 WASHER, 3/8” Flat SAE7 34213 1 PIVOT, Leveling8 59324 1 WELDMENT, Rear Lift Arm9 90483 1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap, GR5

10 32030 2 WASHER, 13/32 x 1-1/4” Flat11 46155 1 LEVER, Height of Cut12 90289 1 NUT, 3/8-24 Hex Center Lock13 46159 1 SPRING, Lever14 12068 2 RING, Rear Lift Arm (Blue)15 31855 1 GUIDE, Belt16 46163 2 SPRING, Assist17 31838 1 BRACE, Top18 16122 1 ROD, Leveling (3/4-24 thread)19 90361 1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap20 58969 1 ASSEMBLY, Clutch Plate21 43848 1 RAIL, Deck Lift, Right Hand22 73269 1 RAIL, Deck Lift, Left Hand23 46157 1 DETENT, Height Adjust24 90324 2 SCREW, 3/8-16 x 1” Hex Washer Self-Tap25 46217 1 SPACER, Detent26 91198 3 SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap27 26420 1 GRIP, Height Adjustment Lever28 12067 2 RING, Front Lift Arm (Red)29 32997 1 ARM, Front Lift30 58041 1 WELDMENT, Front Lift Arm31 90365 1 PIN, 1/8 x 3/4” Cotter32 22717 1 ROD, Deck Support (Front Lift Arm to Front End)33 17847 1 RING, .438 External Retaining34 90858 2 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap35 71920 2 SPACER, Deck Lift36 92051 1 BOLT, #10-24 x 1” Flat Head Square Neck37 91290 1 NUT, #10-24 Hex Nyloc38 32243 1 ANCHOR39 90233 2 SCREW, 5/16-24 x 3/4” Hex Head Cap, GR540 90391 2 WASHER, 5/16” Internal Tooth Lock

BLADE STOP PEDALS


SERIES 2342

BLADE STOP PEDALS

Footnotes:


SERIES 23 43


1 73267 1 FOOT PEDAL, Blade Stop Control2 35669 1 SPRING, Latching3 15448 1 SPRING, Pedal4 15495 1 SHOULDER BOLT, 3/8-24 w/Nylon Patch, GR55 15446 1 SHOULDER BOLT, 3/8-24 x 9/16”6 12063 1 WASHER, 13/32” I.D. Cone7 90155 1 NUT, 3/8-24 Hex, GR B8 90250 2 WASHER, 1/2” Flat SAE9 90289 1 NUT, 3/8-24 Hex Center Lock

10 91584 1 NUT, 1/4-20 Hex Flange Lock, GR511 73216 1 CABLE ASSEMBLY, No Reverse in Mow12 73217 1 CLIP, Cable13 91776 1 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5

BELTS, BRAKES, INTERLOCK


SERIES 2344

BELTS, BRAKES, INTERLOCK

Footnotes:


SERIES 23 45


1 43844 1 BELT, Drive (73.75” AA Section) used on 33” Deck Models-- 22252 1 BELT, Drive (72.75” AA Section) used on 25”, 28” & 30” Decks2 74467 1 NUT, 3/4-16 Hex Jam, GR 83 32027 2 WASHER, 49/64” I.D. x 1-1/2” O.D. Flat4 18781 1 PULLEY, Deck5 15290 1 PULLEY, Hub (Powdered Metal)6 91299 2 NUT, 3/8-16 Hex Nyloc7 29624 2 IDLER PULLEY, 4” Idler8 91497 2 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR59 35728 1 BRACKET, Fixed Idler used on 33” Deck Models only

10 36526 1 BRACE, Fixed Idler Bracket used on 33” Deck Models only11 90858 5 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap12 46567 1 HANDLE, Blade Engagement (Flip)13 10740 2 RING, 2” External Retaining14 90037 3 PIN, 3/32 x 3/4” Cotter15 36521 1 SPRING, Extension, 4” x 1/2” Diameter16 47787 1 WELDMENT, Idler Arm17 14314 1 SPACER, .39 x 1.0 x .31 Nylon18 46874 1 GRIP, Handle19 91514 2 WASHER, 3/8” Flat20 35378 1 DRUM, Brake Spindle21 14304 1 PIN, 1/4 x 1-5/8” Clevis22 34852 1 BAND, Brake (Formed)23 90122 2 WASHER, 3/8” Flat SAE24 90055 4 WASHER, 1/4” Flat25 46677 1 EYE-BOLT, 1/4-20 x 4”26 46648 1 SPRING, Torsion, Flip Handle27 91974 1 PIN, 3/16 x 1” Clevis28 59254 1 WELDMENT, Blade Engagement Handle29 14168 1 SPRNG, Blade Handle30 12055 1 ROD, Idler Control31 90299 1 SCREW, #10-32 x 1” Hex Washer Head Self-Tap32 18524 1 SWITCH, Deck Interlock (NO)33 38021 1 MOUNT, Handle/Switch34 90362 2 SCREW, 1/4-20 x 5/8” Hex Washer Head Self-

Tap

35 90555 1 PIN, 3/32 x 1/2” Cotter36 90761 1 NUT, 1/4-20 Hex Top Lock37 14343 1 BUSHING, Flange .27 x .35 x .438 46782 1 SPRING, Rectangular Wire Die, Blue39 32111 1 RESTRICTOR, Belt

SPINDLE


SERIES 2346

SPINDLE

Footnotes:


SERIES 23 47


1 54531 1 ASSEMBLY, Spindle Housing (Incl. items 2 thru 13)

2 12491 2 RING, 1.85” Internal Retaining3 13313 2 BEARING, Spindle4 40460 1 WELDMENT, Spindle Housing5 10817 1 LUBE FITTING, 3/16” Press-In6 44785 1 SPINDLE, Rider (10.327” overall length)7 10935 1 WASHER, .77 x 1.13 x .06 Flat8 14407 1 WASHER, Spindle9 37751 1 HOLDER, Blade

10 44782 1 SPACER, Blade Centering11 90356 1 NUT, 5/8-18 Hex Center Lock Jam12 90491 2 SCREW, 1/2-20 x 1-1/4” Hex Head Cap, GR513 91939 2 NUT, 1/2-20 Hex, GR5 or B

DECALS PT. 1


SERIES 2348

DECALS PT. 1

Footnotes:


SERIES 23 49


1 22215 1 DECAL, Brake Operation (German)2 22216 1 DECAL, Brake Operation (French)3 22218 1 DECAL, Brake Operation (Dutch)4 22841 1 DECAL, Danger, (Cut Finger) International

Symbol5 74135 1 DECAL, European Noise Control (100 dB)6 35973 1 DECAL Safety Instructions (French/German)7 29776 1 DECAL, Euro Community (CE)8 24052 1 DECAL, Deflector French/German9 29948 1 DECAL, Battery Storage

DECALS PT. 2


SERIES 2350

DECALS PT. 2

Footnotes:


SERIES 23 51


10 35974 1 DECAL Safety Instructions (English/Dutch)11 29784 1 DECAL, Deck/Chute International Warning12 28514 1 DECAL, Clutch Brake13 29947 1 DECAL, Battery Caution, Multi-Language14 29470 1 DECAL, Patent Numbers15 29839 1 DECAL Deflector Caution (English/Dutch)16 23996 1 DECAL, 28 Inch (Hi-Vac)17 22991 1 DECAL, 33 Inch (Hi-Vac)-- 23992 1 DECAL, 25 Inch (Hi-Vac)

DECALS PT. 3


SERIES 2352

DECALS PT. 3

Footnotes:


SERIES 23 53


18 23980 1 DECAL, Back-Up Recoil (33” Kohler Engine Models)

19 23982 1 DECAL, OHV (33” Kohler Engine Models)20 71916 1 DECAL, SNAPPER21 73201 1 DECAL, Brake Operation (Italian)22 73202 1 DECAL, Brake Operation (Spanish)-- 74548 1 DECAL, 2002 Year of Manufacture-- 75378 1 DECAL, 2003 Year of Manufacture23 46218 1 DECAL, Height of Cut24 75608 1 DECAL, Service Parts, Euro

DECALS PT. 4


SERIES 2354

DECALS PT. 4

Footnotes:


SERIES 23 55


25 29113 1 DECAL, Caution, Fuel Leakage (English)26 29114 1 DECAL, Caution, Fuel Leakage (Dutch)27 29346 1 DECAL, Caution, Fuel Leakage (German)28 29345 1 DECAL, Caution, Fuel Leakage (French)29 73199 1 DECAL, Caution, Fuel Leakage (Italian)30 73200 1 DECAL, Caution, Fuel Leakage (Spanish)31 73206 1 DECAL, Safety Instructions (Spanish/Italian)32 74480 1 DECAL, No Mow in Reverse (Euro)33 75777 1 DECAL, Engine, B&S E10 Powerbuilt

ELECTRICAL SYSTEMS (For 11 & 13HP Briggs)


SERIES 2356

ELECTRICAL SYSTEMS (For 11 & 13HP Briggs)

Footnotes:


SERIES 23 57


1 60753 1 KIT, 12 Volt Dry Charge Battery2 75671 1 SOLENOID, Super-Trombetta replaces 188173 22788 1 HARNESS, Starter Wiring (Briggs Engines)4 73715 1 HARNESS, Ignition Wiring (Briggs Engines)5 16168 1 HOLDER, Fuse (Includes Fuse)-- 16169 1 FUSE, 10 Amp6 28606 1 INTERLOCK MODULE, Briggs7 28386 1 HARNESS (Deck Interlock Wiring)8 18524 1 SWITCH, Deck Interlock (NO)9 12444 1 COVER, Battery Cable

10 19326 1 WIRE, Positive (Red, 17” long)11 73797 1 SWITCH, Ignition, 4 Terminal, Indak12 90880 1 WASHER, 5/8” Internal Tooth Lock13 15438 1 NUT, 5/8-32 Hex14 11138 1 IGNITION KEY, Pair15 90539 3 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap16 22886 1 SWITCH, Operator Presence Control (OPC)

Traction (NC/NO)17 91576 5 NUT, 1/4-20 Hex, GR5 or B18 90053 2 WASHER,1/4” Internal Tooth Lock19 27172 2 SCREW, 1/4-20 x 5/8” Hex Head Cap. GR520 28027 1 WIRE, Negative, Black (15” long)21 28607 1 HARNESS, Operator Presence Control (OPC)

Wire22 12485 2 RETAINER, 1/4” Bolt23 12080 2 CABLE TIE, 7”24 90372 2 NUT, 1/4-20 Hex Center Lock, GR5 or B25 14451 1 CABLE TIE, 3.19” long26 29211 1 SWITCH, Seat (NC) used on 11 & 13HP Engines

ELECTRICAL SYSTEMS (Briggs Magneto Ground)


SERIES 2358

ELECTRICAL SYSTEMS (Briggs Magneto Ground)

Footnotes:


SERIES 23 59


- - View shows engine magneto ground connection on throttle plate

ELECTRICAL SYSTEMS (Kohler Engine)


SERIES 2360

ELECTRICAL SYSTEMS (Kohler Engine)

Footnotes:


SERIES 23 61


1 60753 1 KIT, 12 Volt Dry Charge Battery2 75671 1 SOLENOID, Super-Trombetta replaces 188173 19321 1 HARNESS, Starter Wiring (Kohler Engines)4 74405 1 HARNESS, Ignition Wiring (15HP Kohler

Engines)5 16168 1 HOLDER, Fuse (Includes Fuse)-- 16169 1 FUSE, 10 Amp6 28606 1 INTERLOCK MODULE, Briggs & Kohler7 28386 1 HARNESS (Deck Interlock Wiring)8 18524 1 SWITCH, Deck Interlock (NO)9 12444 1 COVER, Battery Cable

10 19326 1 WIRE, Positive (Red, 17” long)11 73797 1 SWITCH, Ignition, 4 Terminal, Indak12 90880 1 WASHER, 5/8” Internal Tooth Lock13 15438 1 NUT, 5/8-32 Hex14 11138 1 IGNITION KEY, Pair15 90539 3 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap16 14451 1 CABLE TIE, 3.19” long17 90063 4 NUT, 1/4-20 Hex18 90053 2 WASHER,1/4” Internal Tooth Lock19 27172 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR520 28027 1 WIRE, Negative, Black (15” long)21 28678 1 HARNESS, Operator Presence Control (OPC)

Wire22 91576 1 NUT, 1/4-20 Hex, GR5 or B23 12080 2 CABLE TIE, 7”24 90372 2 NUT, 1/4-20 Hex Center Lock, GR5 or B25 12485 2 RETAINER, 1/4” Bolt26 23354 1 SWITCH, Seat (NC)27 22886 1 SWITCH, Operator Presence Control (OPC)

Traction (NC/NO)

ELECTRICAL SYSTEMS (Kohler Engine View)


SERIES 2362

ELECTRICAL SYSTEMS (Kohler Engine View)

Footnotes:


SERIES 23 63


- - View shows engine magneto ground area

WIRING SCHEMATICS (8, 11 & 13 HP Briggs Engines)


SERIES 2364

WIRING SCHEMATICS (8, 11 & 13 HP Briggs Engines)

Footnotes:


SERIES 23 65


- - Wiring Schematic includes harness #'s 22788, 73715, 28386, & 28607

WIRING SCHEMATICS (15 HP Kohler Engines)


SERIES 2366

WIRING SCHEMATICS (15 HP Kohler Engines)

Footnotes:


SERIES 23 67


- - Wiring Schematic includes harness #'s 19321, 74405, 28386, & 28678

HARDWARE BAGS


SERIES 2368

HARDWARE BAGS

Footnotes:


SERIES 23 69


-- 61872 1 HARDWARE BAG (Includes the 15 items below) used on E281123BVE Model11024 2 PLUG, 1/2” Cup Insert13321 1 BUSHING, Tie Rod13849 2 SPACER, .33 x .63 x .15613862 1 ROLL PIN, 1/4 x 1-1/2”23667 1 FOAM COVER, Steering Shaft23671 1 COVER, Steering Shaft90372 2 NUT, 1/4-20 Hex Center Lock, GR5 or B91038 2 BOLT, 5/16-18 x 1/2” Hex Flange Nyloc90122 1 WASHER, 3/8” Flat SAE90296 1 PIN, 3/16 x 1” Cotter91516 2 PIN, 5/32 x 1” Cotter29211 1 SWITCH, Seat (NC)23191 2 KNOB, Seat Adjusting (5/16-18 thread)28395 2 SPACER, Pivot90913 2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap

(Torx)-- 63292 1 HARDWARE BAG (Includes the 18 items below) used on E281223BVE, E281323BVE &

E331523KVE75018 2 BRACKET, Seat91714 4 BOLT, 5/16-18 x 1” Square Neck Carriage, GR523735 2 KNOB, Seat Adjusting, 5/16-18 thread11791 4 RETAINER, 5/16” Bolt23354 1 SWITCH, Seat (NC)90951 2 NUT, 5/16-18 Hex Large Flange Center Lock11024 2 PLUG, 1/2” Cup Insert13321 2 BUSHING, Tie Rod13849 2 SPACER, .33 x .63 x .15613862 1 ROLL PIN, 1/4 x 1-1/2”23667 1 FOAM COVER, Steering Shaft23671 1 COVER, Steering Shaft90372 2 NUT, 1/4-20 Hex Center Lock, GR5 or B91038 4 BOLT, 5/16-18 x 1/2” Hex Flange Nyloc90122 2 WASHER, 3/8” Flat SAE90296 1 PIN, 3/16 x 1” Cotter91516 2 PIN, 5/32 x 1” Cotter

-- 63039 1 HARDWARE BAG, 2004 RER, Manual Start (Incl. 17 items below)

used on E251023BVE

11024 2 PLUG, 1/2” Cup Insert13321 2 BUSHING, Tie Rod13849 2 SPACER, .33 x .63 x .15613862 1 ROLL PIN, 1/4 x 1-1/2”23667 1 FOAM COVER, Steering Shaft

HARDWARE BAGS


SERIES 2370

HARDWARE BAGS

Footnotes:


SERIES 23 71


23671 1 COVER, Steering Shaft90372 2 NUT, 1/4-20 Hex Center Lock, GR5 or B91038 4 BOLT, 5/16-18 x 1/2” Hex Flange Nyloc91516 2 PIN, 5/32 x 1” Cotter90296 1 PIN, 3/16 x 1” Cotter90122 2 WASHER, 3/8” Flat SAE75018 2 BRACKET, Seat91714 4 BOLT, 5/16-18 x 1” Square Neck Carriage, GR523735 2 KNOB, Seat Adjusting, 5/16-18 thread11791 4 RETAINER, 5/16” Bolt23354 1 SWITCH, Seat (NC)90951 2 NUT, 5/16-18 Hex Large Flange Center Lock

ACCESSORIES & ATTACHMENTS


SERIES 2372

ACCESSORIES & ATTACHMENTS

Footnotes:


SERIES 23 73


60517 1 KIT, Wheel Weight (8” Wheels) used on All Rear Engine Riders60697 1 KIT, Dump Cart used on All Rear Engine Riders60737 1 KIT, Gage Wheel used on All 33” Deck Rear Engine Riders60941 1 KIT, Single Bag Catcher used on All 25” Deck Rear Engine Riders60943 1 KIT, Single Bag Catcher used on All 28” & 33” Deck Rear Engine Riders63281 1 KIT, Twin Bag Catcher used on All 28” & 33” Deck Rear Engine Riders60947 1 KIT, Bag-N-Wagon used on All 28” & 33” Deck Rear Engine Riders60948 1 KIT, 28” Thatcherizer used on All series 7 & Newer Rear Engine

Riders60964 1 KIT, Wagon Cover used on All 28” & 33” Deck Rear Engine Riders61190 1 KIT, Front Weight used on All series 7 & Newer Rear Engine

Riders60959 1 KIT, 36” Dozer Blade used on All Rear Engine Riders60357 1 KIT, Tire Chains (16 x 6.50-8 Tires) used on All Rear Engine Riders60358 1 KIT, Tire Chains (16 x 4.50-8 Tires) used on All Rear Engine Riders61049 1 KIT, Ninja Recycling Cover used on All 25” Deck Rear Engine Riders61253 1 KIT, Ninja Recycling Cover used on All 28” Deck Rear Engine Riders61255 1 KIT, Ninja Recycling Cover used on All 33” Deck Rear Engine Riders60325 1 KIT, Drive Disc Puller used on All RER Aluminum Drive Discs

Parts Manual for

REAR ENGINE RIDER

SERIES 23

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE

RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

Revision 02,

COPYRIGHT © 2004

TP 400-5019-02-RE-N6/29/2004Manual No. 06153

SNAPPER PRODUCTS, INC.ALL RIGHTS RESERVED.

McDonough, GA, 30253 U.S.A.

EUROPEAN

Documents

REAR ENGINE RIDER EUROPEAN - web5.vade.ie …dealers.fgm.uk.net/PDFFiles/Snapper/Rear-engine/E281223...Table Of Contents TP 400-5019-02-RE-N REAR ENGINE RIDER Manual No. 06153 SERIES