Embed Size (px)
Citation preview
PulsePak® V
E N V I R ONMEN TA LSO L U T I O N S
The PulsePak® V is the optimal solution for the removal of contaminates and fumes from metalworking applications.
The PulsePak® V can deliver superb air cleaning and extended filter life using REDClean® Media Technology. The AAF REDClean® media has been specifically developed to withstand the rigors of pulse cleaning with superior dust release, and outperforms all standard media.
REDClean® Media Technology and optimized inlet air management provide superior performance and extended filter life.
The PulsePak® V Advantage
2
Typical Applications | Thermally generated dusts and fumes
| Laser Cutting | Plasma Cutting | Welding | Thermal Spraying
| Grinding
| Cutting
| Shot Blasting/Peening
| Sand Blasting
3
4
PulsePak® VLeading the Way in Dry Dust Collection Technology
Intergral Spark Trap The intergral spark trap extinguishes sparks and directs contaminants into the roll away dust bin.
Compact Dust Bin The compact dust bin with recessed wheels allows for quick and easy disposal of collected dusts.
Quick Release Door The verticle sliding door reduces floor space requirements allowing for a truly compact design. Save manpower with one person changeout.
Optimized Filter Design The optimized filter design and pulsing system provides industry leading dust release and operational life.
Integral Fan The integral fan allows for indoor operation below 70dB.
HEPA Filter The HEPA after filter delivers clean exhaust air that can be recirculated into the working environment.
Standard Sprinkler Piping Allows for quick and easy installation of fire suppression.
Control Panel | Unit mounted and factory wired ready for use.
| Fan and Pulse Control included, along with Disconnect and Solenoid Valves
Inlet Section | Spark arrestor extinguishes sparks and directs the dust away from the filter media, reducing the loading to allow for longer filter utilization and reduced compressed air usage.
| Delivers equal distribution of air across the V-Pak filters reducing operational pressure drop.
Integral Fan
Pulsing System
Optimized Filter Design
Integral Spark Trap
HEPA
5
Vertical Sliding Door
Single Operator Filter Change-Out
Compact Dust Bin
6
Filtration
OEM Solutions
REDClean Media combined with the V-Pak filter design provides enhanced dust release and extended filter life.
| Vertical pleat configuration eliminates blinding of media allowing for longer operational life compared to horizontally pleated cartridge filters
| V-shaped design maximizes pulse power improving dust release
| Single gasket header reduces potential for bypass
The PulsePak® V is designed with original equipment manufacturers in mind. Our compact design and easy to integrate controls allows for easy installation and set-up. We also offer customizable branding options and volume guarantees. Our goal is to help you increase your sales and to stand out from your competition.
Standard Media | REDClean® NFR High performance proprietary media with nanofiber layer and flame retardant finish
Media Options | REDClean® C Proprietary high-strength media with antistatic characteristics
| REDClean® M Proprietary synthetic media with excellent resistance to humidity
7
Dimensions and Specifications
Please speak to your AAF representativefor an operational animation.
| Dedicated sales and engineering support| Global manufacturing and sales office| Industry leading filtration technology| Customization to fit the OEM needs| Private labeling and integration into existing equipment
Media Area 750 sq. ft. 69.7 m2
Flow Range 1,500-1,900 CFM 2,500-3,200 m3/h
Height 8'-7 1/2' 2,629 mm
Depth 48 9/16" 1,234 mm
Width 49 12/16" 1,264 mm
Weight 1,350 lbs 613 kg
Inlet Size 10" 254 mm
Number of Filter 3 3
Filter Eff. MERV15 F9
Filter Depth 24" 610 mm
Filter Length 26" 660 mm
Filter Width 11" 279 mm
Filter Weight 32.1 lbs 14.6 kg
After Filter 1 1
Dimensions 24"x24"x12" 610x610x305 mm
Dust Loading 1 gr/ft3 @ 2:1 A/C 2.3 g/m3 @ 36 m/h
Noise Level < 75 dB @ 1' < 75 dB @ 3m
Bin Capacity 7 gallons 26.5 L
W
H
D
Sales Offices:
www.aafintl.com
The information in this document is the property of AAF® International and may not be copied or distributed to any third party, or used for any purpose other than that for which it is supplied, without the express written consent of AAFCI. While the information herein is provided in good faith based on information available when the document was created, it should not be relied upon as being complete or accurate, and the products advertised within this document, and their components and accessories, are subject to change without notice. AAFCI provides this information on an AS IS basis and makes no warranties, expressed or implied, or representations regarding same. This document does not establish, and should not be taken as establishing, any contractual or other commitment binding upon AAFCI or any of its subsidiaries or associated companies.
ISO Certified Firm ©2017 AAF InternationalAPC-1-600
Europe, Middle East & Africa
UK Bassington Lane, CramlingtonNorthumberland, NE23 8AF UKTel: +44 1670 713 477Email: [email protected]
Spain C/ Urartea, 11Polígono Ali-Gobeo01010 Vitoria, SpainTel: +34 945 214851Email: [email protected]
France Rue William Dian27620 Gasny, FranceTel: +33 2 32 53 60 60Email: [email protected]
Italy Via Lario, 122070 – Fenegrò (CO), ItalyTel: +39 031 35 25 311Email: [email protected]
Austria Campus 21Europaring F12 4012345 Brunn am Gebirge, AustriaTel: +43 (0) 2236 677 628 0Email: [email protected]
The Netherlands Sales BeneluxP.O. Box 1017800 AC EmmenThe NetherlandsTel: +31 (0) 591 66 4466Email: [email protected]
Germany Robert-Bosch-Str. 30-3264625 BensheimGermanyTel: +49 (0) 6251 80368 0Email: [email protected]
Greece 1, Ifaistou & Kikladon15354- Glika Nera, GreeceTel: +30 2106632015Email: [email protected]
Turkey Hürriyet MahallesiYakac1k D-100 Kuzey Yan Yol No: 49/1-234876 Kartal, Istanbul, TurkeyTel: +90 216 4495164/65Email: [email protected]
UAE FZS1BC01-BC04, Jebel Ali Dubai, UAETel: 009714 8894886Email: [email protected]
Saudi Arabia P.O. Box 59336 Riyadh 11525,Kingdom of Saudi ArabiaTel: +966 1 265 0883Email: [email protected]
Americas
USA 9920 Corporate Campus Drive, Suite 2200Louisville, KY 40223-5000, USATel: 1 502 637 0011Toll Free: 1 800 477 1214Email: [email protected]
México Av. Primero de Mayo No. 85,Col. San Andrés Atenco,C.P. 54040 Tialnepantla Edo. De Mexico, MéxicoTel: +52 55 5565 5200Email: [email protected]
Brasil Rua Dr. Bacelar, 173-12°-andar-cj.121Vila Clementino-CEP 04026-000São Paulo-SPTel: +55 11 5567 3000Email: [email protected]
Asia Pacific
China (Suzhou) Ruisu Science and Technology Park2 Kecheng RoadSIPSuzhouJiangsu ProvinceChina 215100Tel: +86 512 62385973Email: [email protected]
China (Tianjin)Jinta Building, Unit 1162 Zhangzizhong RoadHeping DistrictTianjinChina 300041Tel: +86 22 58630245Email: [email protected]
China (Wuhan) 33 Che Cheng RoadWuhan Economic & Technological Development ZoneWuhan, Hubei Province PR,China 430056Tel: +86 27 8447 3671 +86 27 8447 3672Email: [email protected]
Malaysia Lot 6, Jalan Pengapit, 15/19,Seksyen 1540000 Shah Alam Selangor Darul EhsanMalaysiaTel: +60 3 5039 7777Email: [email protected]
Australia 2 Arctic CourtKeysborough Victoria 3173AustraliaTel: +61 439 442 464Email: [email protected]
E N V I R ONMEN TA LSO L U T I O N S
