PSTC 101 (Method A~E) 180° PEEL STRENGTH …edehege.com.sg/pdf/ADH Product General Catalogue-2011.pdfPSTC 101 (Method A~E) 180° PEEL STRENGTH Measuring Unit : N/24mm (Force/Width)

This comprehensive guide is specially compiled for professionals in the fields of Electronic/Mechani-

cal designing & engineering, material converting/fabricating and most of all,

it is for YOU, who is reading it right now.

www.edehege.com

Wuxi, JiangSu, ChinaTai Seng Industrial Estate, Singapore

• INDUSTRIAL ADHESIVE TAPES

• STANDARD AND CUSTOMISED LAMINATES

• SHIELDING, INSULATING, CONDUCTIVE FILMS & MATERIALS

• PRECISION DIE-CUT MACHINES, LAMINATORS, TAPE SLITTERS

• ETCHING & ENGRAVING CUTTING TOOLS

EDEHEGE FILM PRODUCTS CO LTDNo. 3, Lane 6, Sec. 2, Chieh-Shou Rd, San Hsia Chen, Taipei, TAIWANTel : (886) 2-8676 8105 Fax : (886) 2-8676 3122 [email protected]

WUXI EDEHEGE BOND MATERIAL CO LTDNo.49 Zhujiang Road, Wuxi New District P.R.CHINA Wuxi, Jiangsu Province Zipcode 214028 Tel : (86) 510-82255 909 Fax : (86) 510-82255 917 [email protected]

EDEHEGE PRODUCTS CO LTD THAILAND22 Soi PhoKaew 3 Yae 6, Klongchan, Bangkapi, Bangkok 10240 Tel : (66)-2-946 7639 Fax : (66)-2-948 3590 [email protected]

Authorised distributor for

GENERAL TEST METHODS

PSTC 101 (Method A~E) 180° PEEL STRENGTHMeasuring Unit : N/24mm (Force/Width)General Test Conditions

1. SteelPanel :SUS302or304BAfinished2. Specimen size : 24 ± 0.5mm x 300mm3. Roller : Steel 85 ± 2.5mm diameter, 45 ± 1.5mm width, Rubber sleeve approx. 6mm thick & hardness 80 ± 5, Mass 2040 ± 45g.4. Peel Speed : 300 mm/min or 5.0 ± 0.2mm/sec.5. Environment : 23 ± 1°C & 50 ± 5% RH.

PSTC 101 (Method F)90° PEEL STRENGTH

PSTC 107 (Method A, B, C & G) SHEAR STRENGTH (HOLDING POWER)Measuring Unit : Hrs & mm (Drop & Creep)General Test Conditions

1. SteelPanel :SUS302or304BAfinished2. Specimen size : 12mm x 12mm or 24mm x 24mm (± 0.5mm).3. Roller : Steel 85 ± 2.5mm diameter, 45 ± 1.5mm width, Rubber sleeve approx. 6mm thick & hardness 80 ± 5, Mass 2040 ± 45g.4. Mass : 1000 ± 5g.5. Environment : 23 ± 1°C & 50 ± 5% RH.

PSTC 107 (Method D, E & F) SHEAR STRENGTH (HOLDING POWER)Measuring Unit : 48Hrs & mm (Creep)General Test Conditions

1. SteelPanel :SUS302or304BAfinished2. Specimen size : 12mm x 12mm or 24mm x 24mm (± 0.5mm).3. Roller : Steel 85 ± 2.5mm diameter, 45 ± 1.5mm width, Rubber sleeve approx. 6mm thick & hardness 80 ± 5, Mass 2040 ± 45g.4. Mass : 1000 ± 5g.5. Environment : 23 ± 1°C & 50 ± 5% RH.

PSTC 6 TACK ROLLING BALL (INITIAL TACK)Measuring Unit : Inches (Distance)General Test Conditions

1. Steel Ball : Diameter 7/16”2. Specimen size : 2” x 15”3. Environment : 23 ± 1°C & 50 ± 5% RH.

RESISTANCE MEASURING METHODMeasuring Unit : Ohm (R = V / I)General Test Conditions

1. Copper Electrodes : 1cm x 1cm square area2. Specimen size : >1cm x >1cm square area3. Environment : 23 ± 1°C & 50 ± 5% RH.

EDEHEGE ADHESIVE PRODUCTS PTE LTD

1022 Tai Seng Avenue, #07-3522 Tai Seng Industrial Estate, Singapore 534415

Tel : (65) 6894 4508 Fax : (65) 6894 4518 [email protected]

EDEHEGE REPRESENTATIVE OFFICESJakarta, Indonesia Tel : (62) 21-650 7118 Fax : (62) 21-650 8993 [email protected]

1104

-

IND

D

www.edehege.com

AvailableDependableHonest

Experience counts

Dependable always

Excellence is our objective

Honesty is our policy

Efficiency in execution

Global in outlook

Effective in solutionsSony Chemicals Singapore

EdehegeThe CompleteSolution Provider

ITEM NAME Characteristics

DESCRIPTIONTHICKNESS

(mm)

Important:Informationprovidedaboveisnotintendedforspecificationdevelopmentanddoesnotconstituteawarranty.Usersshoulddeterminethesuitabilityofapplicationindependentlypriortouse.

www.edehege.com

FEATURESConfigurations

LayerConstructions



(mm)

Note:A=Adhesive C=Carrier/Backing L/PL=ReleasePaper/Liner FL=ReleaseFilm/Liner ACR=AcrylicAdhesive Si=SiliconeAdhesiveRUB=RubberAdhesive PSA=PressureSensitiveAdhesive Code:ADH=Edehege SC=SonyChemicalsCME = Clean Manufacturing Environment Fast Moving Main Products


www.edehege.com


LayerConstructions


VISIONTo be a globally competitive enterprise, best known for providing viable solutions, quality products and reliable services.

MISSIONEstablish long term business relationship with parts fabricators, material convertors and users in the electronic related industries by virtues of sincerity and modesty.

QUALITY POLICYTo provide products and services in their utmost consistent quality, so as to satisfy customers’ continuous needs and expectations.

OBJECTIVES1. To provide competitive products and services in our target markets.

2. To deliver our products in their utmost consistent quality.

3. To respond to customers’ queries and provide on time solutions.

4. To constantly review our business, create new products and services.

INTRODUCTION

Edehege (ADH) is a customer-oriented group of companies operating in this region. Due

to the ever growing demands in the market for better products and services, ADH was

established in the year 2000 by Edehege Adhesive Products Pte Ltd in Singapore, followed

by Edehege Film Products Co Ltd in Taipei Taiwan, Edehege Bond Material Co Ltd in Wuxi

China and Edehege Industrial Products in Bangkok Thailand.

Together, we strategically coordinated our products and services to satisfy our customers’

growing needs and expectations.

Through the optimisation of our expertise and resources, ADH is capable of ensuring price

competitiveness (bulk purchase), shorter delivery lead time (keep stock & minimise MOQ)

and quick response to our customers within our respective strategic locations.

ADH is also able to provide customised single or multilayered materials to improve our

customers’ production efficiency and effectiveness.

ADH always says “We stick to your requirements”.

Page 11/12

Tapes & Films Converting Machines

•High perfoamce specs

• Reputable brand in the tape and film industries

• Easy to operate

• Minimum maintenance needed

• Local service and parts

EdehegeisthesoleagentforSingapore&Malaysia.



(mm)


www.edehege.com


LayerConstructions



(mm)



www.edehege.com


LayerConstructions


Page 3/12

DO

UB

LE S

IDED

TA

PES

ADH 201HEconomical / Tissue

A : 0.115 L : 0.100

1,700 ACR / PSA

•Excellentforfelt, non-woven fabric and foams•Suitableformetals,plastics,glassandacrylicsetc.•Hightackiness•Releasepapersuitableforfull-cutprocess•Very cost effective for general purpose

PSATissuePSA

Release Paper

}Tape

KT 412ADEconomical / Tissue / UL

A : 0.120 L : 0.120

1,725 ACR / PSA

•ExcellentforPU foams (ester or ether-based)•Suitableformetals,plastics,fabricsetc.•Hightackiness•Releasepapersuitablefordie-cutprocess•Value for money

PSATissuePSA

Release Paper

}Tape

ADH 7701KSilicone&Acrylic/PETcarrier

A : 0.100 PL : 0.135 FL : 0.052

>1,000 (Si)

>1,200 (ACR) PSA

•Bonding silicone rubber to plastic/metal parts after tape die-cut•Goodweatherability•Releasepapersuitableforhalf-cutprocess•Commonlyuseinsilicone rubber keypad assemblies

PET Liner

Silicone PSAPET carrierAcrylicPSA

Release Paper

}Tape

ADH1038BEconomical / Tissue / Black

A : 0.100 L : 0.120

1,600 ACR / PSA

•Excellentforplastic nameplates•Black colour adhesive good for concealing•Suitableformetals,plastics,glassandpaintetc.•Releasepapersuitablefordie-cutprocess•Value for money

SC UT SeriesHighQuality/AcrylicFoamDST

Grey/White/Clear

A : Various L : Various

> 3,000 ACR / PSA

•Comesinvarious carriers, colours & bonding characteristics•Gooddampingandagingproperties•Excellentresistance to water, solvent, dust & sunlight•Releasepapersuitablefordie-cutprocess• UL File No. E63260

PSA

Release Paper

}Tape

ADH 3100 SeriesDurable/AcrylicFoamDST

Grey/White/Clear

A : 0.4, 0.5, 0.6,

0.8, 1.0, 1.1 & 1.5

L : 0.1

> 3,000 ACR / PSA

•High bonding strength on metals, plastics, glass etc.•Gooddampingandagingproperties•Excellentweatherability, resistant to water, solvent & sunlight•Formounting automotive emblem, bumper, step pad, visor etc.•RedPEreleaselinersuitablefordie-cutprocess

PSA

Release Paper

}Tape

ADH 2000 SeriesSuperClearPolyesterFilmTape

2001 : 1mil 2002 : 2mils 2003 : 3mils 2004 : 4mils A : 0.033 L : 0.11~0.18

1,000~1,200 ACR / PSA

•Adhereswellonplastics,metals,foilsandpaper•Usessuper clear polyester film for outstanding presentation•Suitableforlamination on metal foil parts•Comesinvariousfilmthicknessesandadhesivesystems•Suitablefordie-cutprocess

ADH 2000BFC Series

PigmentBlackPolyesterFilmTape

2001BFC : 1mil2002BFC : 2mils to2004BFC : 4mils A : 0.033L : 0.11~0.18

•Adhereswellonplastics,metals,foilsandpaper•Black polyester film exhibits dull black surface for general purpose•Suitableforconcealing, light blocking and overlay on other parts•Comesinvariousfilmthicknessesandadhesivesystems•Suitablefordie-cutprocess;Economical grade

ADH 2000BF Series

PigmentBlackPolyesterFilmTape

2001BF : 1mil 2002BF : 2mils to 20075BF : 7.5mils A : 0.033 L : 0.11~0.18

•Adhereswellonplastics,metals,foilsandpaper•Black polyester film exhibits smooth & dark surface•Suitableforconcealing, light blocking and overlay on other parts•Comesinvariousfilmthicknessesandadhesivesystems•Suitablefordie-cutprocess;High quality grade

ADH 2000W Series

WhitePolyesterFilmTape

2001W : 1mil 2002W : 2mils 2003W : 3mils 2004W : 4mils A : 0.033 L : 0.08~0.18

•Adhereswellonplastics,metals,foilsandpaper•Opaque white polyester film exhibits bright & glossy surface•Suitablefor light reflecting, concealing and ink printing•Comesinvariousfilmthicknessesandadhesivesystems•Suitablefordie-cutprocess

ADH 2000HSSeries

Clear Film Tape / Heat Sealing

FullyCustomised

Various HSA

•Special coating on polyester film forspecificpurpose• Various adhesive systems; Peel strength, heating, thickness etc.•Customisedtosuitmostapplicationneeds•Typicallyforsealing new laser toner cartridge afterfilling•Supplyinnarrowwidthsorlogrolls

POLY

ESTE

R F

ILM

TA

PES

ADH 1720Differential Tape / PET carrier

A : 0.09 L : 0.078

>1,500 (Air Side)

>600 (Liner Side)

•Forbondingmetals,plastics,glassetc.•Differentialadhesionleveltoprovide reposition of substrates•Goodagingproperties•Excellectfordie-cuttingprocess

PSAPETPSA

Release Paper

}Tape

ADH 1415Differential Tape / PET carrier

A : 0.085 L : 0.110

>1,300 (Air Side)

<600 (Liner Side)

•Forbondingmetals,plastics,glassetc.•Differentialadhesionleveltoprovide reposition of substrates•Residue free removablility•Goodagingproperties•Excellectfordie-cuttingprocess

PSAPETPSA

GlassinePaper

}Tape

Black PSATissueBlack PSA

Release Paper

}Tape

ACRY

LIC FO

AM TA

PES

ADH 1463Transfer Tape / Non-carrier

A : 0.030 L : 0.110

600 ACR / PSA

•Thinguageforgeneralbondingapplicationssuchaslabelstocks•Forbondingplastic,metal,paperandsomefabricsandfoams•Goodholdingpower•Excellentfordie-cuttingprocess•CheckoutADH1467asthe50µmversion

PSA

Release Paper

}Tape

PEEL STRENGTHAdhesive Base

PET

HSA

}Tape

PET

PSA

Release Paper

}Tape

PET

PSA

Release Paper

}Tape

PET

PSA

Release Paper

}Tape

PET

PSA

Release Paper

}Tape

ADH 1025Economical / PET carrier

A : 0.08 L : 0.130

>1,300•Forbondingmetals,plastics,glass&foamsetc.•Gooddimensionstability•Highbondingstrength•Excellectfordie-cuttingprocess•Very cost effective for general purpose

PSAPETPSA

Release Paper

}Tape

Page 10/12

Material Converting MachinesLocal service & parts • One year local guarantee

Precision Multi-stage Laminators• Range from Single to 3-stage laminating stations• Material width 200, 300 and 400mm• Standard steel shafts or air shafts combination• Single phase power supply• Cascade with any other machines

Single Stage3-Shafts

2-Stage5-Shafts

3-Stage7-Shafts

TopSeller!

Precision High-speed Die-cut Machines• Platform size : Small 200(IN) x 180mm; Medium 280(IN) x 250mm; Large 420(IN) x 320mm• Up to 220 strokes per minute• Feeding tolerance below 0.1mm• Full Functions : Input tension guide; 7in colour touch panel; Auto oil lubrication; Sheet cutter; Mark tracing sensor; Online sensors; Non-tension unwind and rewind etc.• Standard steel shafts or air shafts combination• Easy to operate• Compact saves space!

TopSeller!

Precision Sheet Cutting Machines• Material Width : Small 320mm; Medium 420mm; Large 700mm• Up to 120 strokes per minute• Workable Length from 1 to 999mm• Feeding tolerance below 0.2mm at 500mm.• Full Functions : Input tension guide; 5in colour touch panel; Online sensors; Non-tension unwind etc.• Standard steel shafts or air shafts combination• Single phase power supply• Plug & play, no hassle!

Laminate-Diecut Combo Setup

Edehege is the sole agent for all export markets



(mm)


www.edehege.com


LayerConstructions



(mm)



www.edehege.com


LayerConstructions


Page 4/12

SILI

CO

NE

TAPE

S

ILLUSTRATION

ADH F-PI Series F-PI025 =0.025mm F-PI050 =0.050mm F-PI075 =0.075mm F-PI100 =0.100mm F-PI125 =0.125mm

> 650 ACR / PSA

•High thermal resistance Polyimide films (PI): -269 to 260°C •Excellent electrical insulation •UL94V-0 flameretardantgrade•Mechanicallymoresuperiorthanmostplastics•Costeffectivecomparedtootherleadingbrands•Suitablefordie-cutandlaminationprocess

Polyimide

ADH F-PI K SeriesBlackPolyimideFilms

F-PI025K =0.025mm F-PI050K =0.050mm F-PI075K =0.075mm F-PI100K =0.100mm F-PI125K =0.125mm

•High thermal resistance Polyimide films (PI): -269 to 260°C •Excellent electrical insulation •UL94V-0 flameretardantgrade•Black colour•Costeffectivecomparedtootherleadingbrands•Suitablefordie-cutandlaminationprocess

SC T4082SSiliconePolyesterTape

C : 0.038 A : 0.033

960 Si / PSA BLUE

•High adhesion strength to silicone coated surfaces•No adhesive residue at removal even after long period of aging•Mostsuitableforsplicingreleasepaperorfilm•For temporary masking, holding and securing movable parts

PSA

Pigmented PET

HIG

H T

EMPE

RAT

UR

E FI

LMS EconomicalPolyimideFilms

Release LevelsU :VerylightT : TightTT :VeryTight

DIE

-CU

T SU

PPO

RTI

NG

MAT

ERIA

LS

ADH AL-PT Series

Non-StaticSiPolyesterReleaseLiners

0.025 0.05 0.075 0.100

Silicone Release CoatingAnti-Static Treatment

PETfilm

ADH L-PTF Series

FlouroPolyesterReleaseLiners

0.050 0.075 0.100

•Stable release coating matches most silicone base adhesives •Usedasadhesivetransfermediumoradhesiveprotectionlayer•Designedfor smoother release feature•3 main film thickness & 3 releasing levels to suit most requirements

Flouro Release Coating

PETfilm

ADH L-PT NS Series

HighQualitySilicone-FreePolyesterReleaseLiners

0.025 0.05 0.100

•UsingQuilon as release coating•For applications that require silicone-free characteristics•Consistentandreliable•3 main film thickness to suit most requirements

Quilon Release Coating

PETfilm

ADH L-PT SeriesSiliconisedPolyesterReleaseLiners

0.025 0.038 0.05 0.075 0.100

•Stable release coating matches most adhesives during die-cutting•Used as adhesive transfer medium or adhesive protection layer•Economicalandreliable•5 releasing levels to suit most requirements•5 main film thickness to suit most requirements

Silicone Release Coating

PETfilm

ADH 2330 SeriesSlug Pullers / Pick-up Tapes

C : 0.05 A : 0.01

•Auto-removal of waste materials during rotary die-cutting•Good picking-up properties matching most materials•Economicalcomparingtoconventionalcellophanetapesmethod•Replacestheconventionalslowmanualprocess•Several adhesion levels to suit most materials

PSA

PET

ADH 2310 SeriesCarrier Tapes

C : 0.05 A : 0.01

•Support for filmsy materials during rotary die-cutting•Damage-proof packaging for sensitive components & parts such asthinfilms,FPCs,softfabrics,thinelastomersetc.duringtransporta-tion•AdditionalPETlinertypealsoavailable

Weak PSA

PET

Polyimide

ADH 2352LSuper Clear Protection Film

PET : 0.05A : 0.007FL : 0.023

•Temporary protective film for windows or lens of equipments•Specialremovableadhesivewithnon-bubblelaminationproperties•High consistency adhesive coatings in CME•Economicalandeffective•Suitablefordie-cutprocess•SeeADH2354Lforthe100µmbasetype

PET

PSA

PET Release Liner

}Tape

ADH 2354LSuper Clear Protection Film

PET : 0.1 A : 0.010FL : 0.023

•Temporary protective film for windows or lens of equipments•Specialremovableadhesivewithnon-bubblelaminationproperties•High consistency adhesive coatings in CME•Economicalandeffective•Suitablefordie-cutprocess•SeeADH2352Lforthe50µmbasetypeSU

RFA

CE

PRO

TEC

TIO

N

PET

PSA

PET Release Liner

}Tape

PLA

STIC

C

OR

ES PLASTIC CORESPolyethylene&Polypropylene

Wall Thickness3, 4, 5, 6 &

9mm

•For cleanroom use•For 1, 3 and 6 inches ID shafts•Standardlogwidthorcutsize

ADH 3396 SeriesFingerLift/IdentificationTape

C : 0.025 A : 0.030

Red, Blue, Green, Yellow, Beige, Black

& White

•Vivid colours for finger lift tabs and identification purpose•200mrolland3”PEcoredesignedfor cleanroom and rotary cutter•Easytoslitintonarrowwidths•Goodadhesiontomostplasticfilmliners•Fully RoHS compliant

Pigmented PSA

PET

•Stable release coating matches most adhesives during die-cutting•Usedasadhesivetransfermediumoradhesiveprotectionlayer• Designed for static-free environments•5 releasing levels to suit most requirements•4 main film thickness to suit most requirements

Pigmented PSA

PET

ADH 9347SiliconePolyesterTape C : 0.035

A : 0.030

700 Si / PSA GREEN

•Ableto withstand high temperature up to 180°C• No adhesive residue at removal even after long period of aging•Mostsuitableforpowder coating and paint masking in hot oven.•Fortemporarymasking,holdingandsecuringmovableparts•Economicalandeffective

ADH 7347SiliconePolyesterTape

C : 0.025 A : 0.065

700 Si / PSA RED / GREEN / BLUE / YELLOW

•Ableto withstand high temperature up to 180°C• No adhesive residue at removal even after long period of aging•Mostsuitableforsplicing oftapesandfilmrolls.•Fortemporary holding and securing movable parts•Economicalandeffective

Pigmented PSA

PET

Page 9/12

Blade Height & Base Thickness

A : Steel 1.2mm 1.5mm 2.0mm 2.5mm

B : Blade Height < 0.9mm < 1.2mm < 1.6mm < 2.0mm

C : Base Thickness > 0.3mm > 0.3mm > 0.4mm > 0.5mm

D : Edge Angle 30 ~ 60° 30 ~ 60° 30 ~ 60° 30 ~ 60°

Dimension Limits

F : Min Radius 0.1mm

G : Min Gap 0.5mm

H : Min Edhge Flatness 0.2mm

I : Min Extrusion 0.2mm

J : Min Diameter 0.5mm

Height & Spacing

A : Min Edge Spacing 0.5mm

B : Max Height Tolerance 0.1mm

Cut & Press Lines

A : Min Gap 0.5mm

B : Max Height Tolerance 0.1mm

C : Min Press Width 0.1mm

Perforated / Serrated Blade

A : Min Spacing 0.5mm

B : Max Blade Dent 0.25mm

90° Back Bevel Blade

Steel 1.2mm 1.5mm 2.0mm 2.5mm

Min Gap 1.2mm

100° Back Bevel Blade

Steel 1.2mm 1.5mm 2.0mm 2.5mm

Min Gap 0.8mm

Stock Steel Sizes

Thickness x Size Max Blade Thickness

1. 1.2T x 600 x 400mm 0.8mm

2. 1.5T x 570 x 390mm 1.2mm

3. 2.0T x 600 x 400mm 1.5mm

4. 2.5T x 600 x 500mm 2.0mm

Air Suction2-Stage

Guide Pins

Drop-off

Etched & Engraved Die-Tools

Order to Deliverytakes only 3 days!



(mm)


www.edehege.com


LayerConstructions



(mm)



www.edehege.com


LayerConstructions


Page 5/12

EMI S

HIE

LDIN

G &

TH

ERM

AL

MAT

ERIA

LS

ALGT & ALGKConductiveALFoamGaskets Customised NA

•Cost effective EMI/RFI interference shielding•Provides cushion & grounding of noisebetweenbulkycomponents•Connects without soldering;Highlyreworkable•Suffix“ALGT”=Normaltape;“ALGK”=Conductivetape•Comesinvariouswidths,heights,shapes&withorwithoutadhesive

RFID AbsorberMFH-NS

Metal Sheet

0.01 ~ 1.2 NA•Specially designed to absorb 13.56MHz•Providessingle side data readout on RFID labels•Canbetunetooptimumperformanceaccordingtotypesofloopantennas

56GT & 56GKConductiveFabricFoamGaskets

Customised NA

•Shielding EMI/RFI interference•Provides cushion & grounding of noisebetweenbulkycomponents•Connects without soldering;Highlyreworkable•Suffix“GT”=Normaltape;“GK”=Conductivetapeuseforpositioning•Comesinvariouswidths,heights,shapes&withorwithoutadhesive

ADH 1410Conductive Fabric TapeRipstop Cu+Ni Based

C : 0.10 A : 0.03 L : 0.18

1,000 COND-ACR / PSA

•ShieldingEMI/RFI interference. Connects without soldering.•Surface Resistivity <0.08 Ohm; Shield >60dB at 30MHz~1GHz•Formaking conductive foam and cushion gaskets•Veryflexible;Suitableforadheringtounevensurfacesinsidechasis•Releasepapersuitablefordie-cutprocess

TIM seriesThermal Conductive Rubber

0.25 ~ 20.0

•Transferheatenergyawayfromheatsourcetoheatsink•Siliconerubberwithhighperformancethermalconductivefillers•Conductivity from 1.5 to 7.0W/mK•Working temperature from -60 to 200°C•Veryconforming;Maximisecontactareaonunevensurfaces•Comeswithorwithoutadhesiveandreleaseliners

CM seriesConductive Mesh

Mesh : 80, 130 & 200 NA

•ShieldingEMI/RFIinterference.•Resistivity 0.02~0.1 Ohm;Shield 31~34dB at 500MHz •Microphonenetfordust filtering•Ironizing air moleculesinairconditionersorpurifyers•Polyesterbasemesh 80, 130 & 200 with Cu+ Ni combinations

CFT seriesConductive Non-woven Tape

/ Cu+Ni Based

C : 0.15 A : 0.02 L : 0.18


•ShieldingEMI/RFI interference. Connects without soldering.•DC Resistivity <0.1 Ohm•Forlayeringintocuashion gaskets•Good cushioning properties•Releasepapersuitablefordie-cutprocess

Cu+Ni Fabric

Conductive PSA

Release Paper

}Tape

Cu+Ni Non-Woven

Conductive PSA

Release Paper

}Tape

Cu+Ni Conductive Mesh

Release Liner

TIM

Release Liner

Zoom in view

Zoom in view

POLY

IMID

E TA

PES

ILLUSTRATION

ADH 1470 SeriesPolyimideFilmTapes

HighTempAcrylicAdhesive

C: 1, 2, 3, 4 & 5mils

A : 0.03

> 650 ACR / PSA

•Economicalpolyimidefilm(PI)coatedwithacrylicadhesive•Serves up to 120°C•Designedforelectrical and thermal insulation•Suffix “L” comes with release paper

Polyimide

PSA}Tape

ADH 1450 SeriesPolyimideFilmTapes

High Temp Silicone Rubber Adhesive

C: 1, 2, 3, 4 & 5mils

A : 0.04

> 600 Si / PSA

•Veryhighheat resistance: >200°C•Mostsuitableforsoldermaskingasfilmcanwithstandtheheatand adhesive leaves no residue after removal•Designedforelectrical and thermal insulation•Suffix “L” comes with release liner

Polyimide

PSA}Tape

ADH 1470L SeriesPolyimideFilmTapes

HighTempAcrylicAdhesive

C : 1, 2, 3, 4 & 5mils

A : 0.03 L : 0.12

> 650 ACR / PSA

•Economicalpolyimidefilm(PI)coatedwithacrylicadhesive•Serves up to 120°C•Designedforelectrical and thermal insulation•ComeswithSilicone release paperforeasydie-cutprocess

Polyimide

PSA

Release Paper

}Tape

ADH 1450L SeriesPolyimideFilmTapes

High Temp Silicone Rubber Adhesive

C : 1, 2, 3, 4 & 5mils

A : 0.04 L : 0.075

> 600 Si / PSA

•Veryhighheat resistance: >200°C•Mostsuitableforsoldermaskingasfilmcanwithstandtheheatand adhesive leaves no residue after removal•Designedforelectrical and thermal insulation•Comeswithflouro release polyester liner for easy die-cut process

Polyimide

PSA

Release Liner (PET)

}Tape

SC SP7600Heat Bondable Speaker Net (Fabric)

0.095~0.100

•ModifiedEVAbasedadhesivecoatedonpolyester fibre (70 mesh)•Suitableforuseinspeaker inner mesh as a protection from dust •Goodsoundtransmission;verylowdamping•Easytoassemble;justapply heat on the desire bonding areas•Adhereswelltoplastics,metalsandpaper.

PET Fibre Mesh

Zoom in view

ADH PEMO MESH100%PolyesterMonofilament

Speaker Mesh

420

Black or White

•Forminiature speaker or microphone use•Commonlyusedinmobilephones,GPSnavigators,portablesoundsystems•Excellentacoustic performance•Excellentasadustfilter

Zoom in view

PET Filament Mesh

ADH MNO MESH100%Nylon6Monofilament

Filter Mesh

Mesh : 20~188

White

•Heavy duty and resilient•Goodacousticperformance•Excellentasadust filter•Economical and reliable

Zoom in view

NylonFilamentMesh

MES

H /

NET

Page 8/12

BU seriesConductive Bonded Urethane

0.3, 0.5 & 0.7

•ShieldingEMI/RFIinterference.•Resistivity : Vertical <0.05 Ohm;Surface<0.1Ohm• Shield >60dB at 500MHz •Toreplaceconductivefoamgasketsorconductivefabric/feltcombifor thickness below 1mm applications.

Cu+Ni Conductive Mesh

Product Code Film Type Thick-ness Top Coat Adhesive Standard Size MOQ/

sqm UL TDS RoHs

High Temperature 280°C

ADH PIL-2605A

Polyimide

50 micron Gloss

Solvent Acrylic 1013mm x 100m 500

Y Y Y

ADH PIL-2615A 50 micron Matte Y Y Y

ADH PIL-6014A 25 micron Gloss Y Y Y

ADH PIL-6114A 25 micron Matte Y Y Y

ADH PIL-2465A 50 micron PremiumGloss Y Y Y

Destructible

ADH PPD-4421A

Destructible White PP

70 micron

Matte

PermanentAcrylic

1180mm x 100m 500

N Y Y

ADH PPD-4442A 70 micron Permanent Rubber N Y Y

ADH PPD-4423A 70 micron PermanentAcrylic N Y Y

ADH PSD-1422A 150 miron PermanentAcrylic N Y Y

Extreme Durability

ADH SXD-1721A SilverPolyster 50 micron MattePermanent Acrylic 1180mm x 100m 500

N Y Y

ADH XD-1824A WhitePolyester 50 micron Gloss N Y Y

ADH XD-1721A WhitePolyester 50 micron Matte N Y Y

Premium Polyester

ADH PTL-1101A Transparent PET 25 micron Gloss

Permanent Acrylic 1180mm x 100m 500

Y Y Y

ADH PTL-1201A Transparent PET 50 micron Gloss N Y Y

ADH PTL-2201A WhitePolyester 50 micron Gloss Y Y Y

ADH PTL-2241A WhitePolyester 50 micron Matte Y Y Y

ADH PTL-2321A VeryWhitePET 50 micron Gloss Pending Y Y

ADH PTL-5123A WhitePolyester 25 micron Gloss Pending

ADH SPT-3241A SilverPolyester 50 micron Matte Y Y Y

Overlamination TT Printable

ADH POL-1101A Polyester 25 micron ClearGlossPermanent Acrylic

1180mm x 100m

500

Y Y Y

ADH POL-1201A Polyester 50 miron ClearGloss 1180mm x 100m N Y Y

ADH POL-3410B UV Authentication 12 micron Clear Matte 700mm x 100m N Y Y

Static Dissipative

ADH PISD-7847 Polyimide 25 micron Semi-gloss SolventAcrylic 1180mm x 100m 500 N Y Y

High Performance Labelstocks• Thermal Transfer & Flexo printable

• RoHS & REACH compliant

• Halogen-Free

• High Temperature

• Abrasion Resistant

• Chemical & Solvent Resistant

• Permanent & Removable

• Temper Evident

• Authentication



(mm)


www.edehege.com


LayerConstructions



(mm)



www.edehege.com


LayerConstructions


ADH 5450CConductive R/A Copper Foil Tape

C : 0.050 A : 0.030 L : 0.135

800 COND-ACR / PSA

•ShieldingEMI/RFI.Resistivity <0.3 Ohm•Rolled/AnnealedCopperfoilpurity>99.92%•Adhereswellonmostsurfaces•Solderablecoppersurface•Releasepapersuitablefordie-cutprocess

CU Foil (Dead Soft)

Conductive PSA

Release Paper

}Tape

PEEL STRENGTHAdhesive Base

Page 6/12

ADH 6420DDouble-Sided Conductive

Aluminium Foil Tape

C : 0.02 A : 0.06 L : 0.14


• Shielding EMI/RFI;Grounding and draining noise signals•DC Resistivity <0.5 Ohm •Gooddimensionstability;•Bonding conductive components together without soldering•Releasepapersuitablefordie-cutprocess

ALU

MIN

IUM

FO

IL T

APE

S

ADH 5400Rolled Annealed Copper Foil Tape

C : 0.035 A : 0.03 L : 0.11

1,200 ACR / PSA

•Shielding EMI/RFI;Grounding and draining noise signals•DeadsoftCopperfoilpurity>99.92%•Electrical & Thermal conductive foil layer•Adhereswellonmostsurfaces•Releasepapersuitablefordie-cutprocess

ADH 5420Conductive R/A Copper Foil Tape /

C : 0.035 A : 0.04 L : 0.13

900 COND-ACR / PSA

•Shielding EMI/RFI. Resistivity <0.3 Ohm•DeadsoftCopperfoilpurity>99.92%•Gooddimensionstability;•Bonding conductive components together without soldering•Releasepapersuitablefordie-cutprocess

ADH 5430EConductive Embossed

Rolled Annealed Copper Foil Tape

C : 0.035 A : 0.04 L : 0.14

900 COND-ACR / PSA

•Embossed surface promotes shielding performance.•Resistivity<0.5Ohm.•Shielding EMI/RFI, grounding and draining noise signals•Adhereswellonmostsurfaces•Releasepapersuitablefordie-cutprocess

ADH 5400CConductive R/A Copper Foil Tape

C : 0.025 A : 0.035 L : 0.135 1,000

COND-ACR / PSA

•ShieldingEMI/RFI.Resistivity <0.3 Ohm•Rolled/AnnealedCopperfoilpurity>99.92%•Lower cost than ADH5420 due to copper surface colour tone•Solderablecoppersurface•Releasepapersuitablefordie-cutprocess

CO

PPER

FO

IL T

APE

S

ADH 5500E/D HTE Copper Foil Tape

C : 0.036 A : 0.043 L : 0.11

1,200 ACR / PSA

•Shielding EMI/RFI;Grounding and draining noise signals•HTEcopperfoilless prone to damage corners & wrinkles•Highoperatingtemperature130°C•Solderablecoppersurface•Releasepapersuitablefordie-cutprocess

ADH 6440EConductive Embossed Aluminium Foil Tape

C : 0.04 A : 0.03 L : 0.14

800 COND-ACR / PSA

• Shielding EMI/RFI;Grounding and draining noise signals• DC Resistivity <0.5 Ohm • Embossed foil surface for better performance•Connectswithoutsoldering;EconomicalcomparingtoCopperFoil•Releasepapersuitableforfull-cutprocess

ADH 6400 SeriesAluminium Foil Tape

1,200 ACR / PSA

•Shielding EMI/RFI;Grounding and draining noise signals•Thermal insulation / Heat reflective•Adhereswellonmostsurfaces•EconomicalcomparingtoCopperFoil•Releasepapersuitablefordie-cutprocess

Foil Thickness 6400 : 0.04 6450 : 0.05 6475 : 0.075 64100 : 0.100 Acrylic PSA 30~40µm

ADH 6400C Series

Conductive Aluminium Foil Tape 1,000 COND-ACR / PSA

•Shielding EMI/RFI;Grounding and draining noise signals•DC Resistivity <0.5 Ohm •Connectswithoutsoldering•EconomicalcomparingtoCopperFoil•Releasepapersuitablefordie-cutprocess

Foil Thickness 0.04 ~ 0.07mm Conductive PSA 30~40µm

ADH 2064HS Se-ries

Toner Cartridge Sealing Tape

Multi-layers AL/PE/PET

•Shields UV lights while keeping the package sealed•Heat sealable on PC, PS, PVC and metal surfaces•Smooth,reliableandelegantappearance•Goodadhesionstrengthwithadequate peeling-feel•CustomisedlaminatesofPET,PE,ALandHSAcombinations

ADH AxPx SeriesCustomised AL + PET Laminates

Dual-layers Aluminium Polyester

Customised

•Shielding EMI/RFI, Grounding and draining noise signals•Membraneswitch,wrappingcables,lightormoisturebarrieretc.•Full range of combinations of PET and AL thicknesses•MorecosteffectivecomparingtoCopperfoiltype•Suitablefordie-cutprocess;Supplyinslittedrollsorsheetform

ADH VxPx SeriesCustomised VMPET + PET Laminates Multi-layers

•Super low-noise,bright,lightweightandhighlyconformingdesign•Madeforlow-noiseflexible insulated ducts & other HVAC products•Minimumcostimpact•Better performancecomparingtobaremetalisedfilm•Suitableforheatgummingprocess

ADH CxPx SeriesCustomised CU + PET Laminates

Dual-layers Copper Polyester

Customised

•Shielding EMI/RFI, grounding and draining noise signals•Full range of combinations of PET and CU thicknesses•MoreeffectiveinperformancecomparetoAluminiumfoiltype•Suitablefordie-cutprocess;•Supplyinslittedrollsorsheetform

CU

STO

MIS

ED L

AM

INAT

ES

AL Foil (Dead soft)

PSA

Release Paper

}Tape

AL Foil (Dead soft)

Conductive PSA

Release Paper

}Tape

Conductive PSAAL FoilConductive PSA

Release Paper

}Tape

EmbossedAL Foil (Dead soft)Conductive PSA

Release Paper

}Tape

CU Foil (Dead soft)

PSA

Release Paper

}Tape

EmbossedCU Foil (Dead soft)Conductive PSA

Release Paper

}Tape

CU Foil (HTE)

PSA

Release Paper

}Tape

CU Foil (Dead Soft)

Conductive PSA

Release Paper

}Tape

PE FilmAL FoilPET Film Typical LayoutHSA

AL Foil (Dead Soft)

DryAdhesive

PET Film

CU Foil (Dead Soft)

DryAdhesive

PET Film

Metalised Film

Adhesive

PET Film

CU Foil (Dead Soft)

Conductive PSA

Release Paper

}Tape

Page 7/12

OMPC G21 / G21BGraphicGradePolycarbonateFilms/

Matte/ Polished / Clear or Black

•Highly printable PCfilms&sheets•Matte / Polished clear translucent or black•ProtectedbythermoformablePEmaskingsonthepolishedsides•UL94V-2 approved; UL File No. E249605•Mostsuitableformakingdiffusers,nameplates,coverlaysetc.•Suitablefordie-cutandsilkscreenprintingprocess

0.125 0.175 0.2 0.25 0.3

0.375 0.4 0.5 0.8 1.0

FUN

CTI

ON

AL

PLA

STIC

FIL

MS

/ SH

EETS

F-PT B SeriesPolyesterFilmBlack

0.025 0.050 0.075 0.125

•Pigmented black polyester (PET) films•Goodmechanicalproperties•Suitableforwiderangeofapplications•Economical and reliable•Commonlyused in the packaging industries

F-PT SeriesClearPolyesterFilms 0.025~0.35

•AwiderangeofPolyester(PET)filmsfromJapan,Korea&China•Variety of gauges, surface treatments, colours and functionalities•Forapplicationsthatrequireelectricalinsulation,coverlay,windowetc.•MechanicallymoresuperiorthanOPP,PE,PP,PVC,PSfilms•Suitablefordie-cutandlaminationprocess

ADH VMPET Series

VacuumMetalisedPolyesterFilms

0.012~0.10

•AluminiummetalizedPolyesterfilms•Highly reflective to light source and thermal radiation•CommonlyusedasthermalinsulationlayerinHVACs products•EconomicalcomparingtoAluminiumFoil•Comesinseverallevelsofsurfacebrightnessandmatte

PETfilmTexture:NaturalGloss

PETfilm

AL Metalized

PETfilm


2 Side Polished / Clear or Black

•Highly printable PCfilms&sheets•Polished clear transparent or black•ProtectedbythermoformablePEmaskingsonthepolishedsides•UL94V-2 approved;ULFileNo.E249605•Mostsuitableformakingdisplaywindows,nameplates,coverlaysetc.•Suitablefordie-cutandsilkscreenprintingprocess

0.125 0.175 0.2 0.25 0.3

0.375 0.4 0.5 0.8 1.0

ILLUSTRATION

High Speed Die-Cut Machine MultilayerLaminator Warehouse

OMPC SE11 / SE21 / SE41 / SE42

FlameRetardantGradePolycarbonateFilms/Clear

•Flame retardant gradePCfilms&sheets•Polished / textures and clear translucent •UL94V-0 approved;ULFileNo.E249605•Mostsuitableformakingelectricalandheatinsulatorsetc.•Suitablefordie-cutprocess

0.1 0.125 0.175 0.25 0.375

0.43 0.50 0.76


Velvet / Polished / Clear or Black

•Highly printablePCfilms&sheets•Velvet / Polished clear translucent or black•ProtectedbythermoformablePEmaskingsonthepolishedsides•UL94V-2 approved;ULFileNo.E249605•Mostsuitableformakingdiffusers,nameplates,coverlaysetc.•Suitablefordie-cutandsilkscreenprintingprocess

0.125 0.175 0.2 0.25 0.3

0.375 0.4 0.5 0.8 1.0


Velvet / Matte / Clear or Black

•Highly printable PCfilms&sheets•Velvet / Matte clear translucent or black•UL94V-2 approved;ULFileNo.E249605•Mostsuitableformakingframes&panels,nameplates,diffuserssetc.•Suitablefordie-cutandsilkscreenprintingprocess

0.125 0.175 0.2 0.25 0.3

0.375 0.4 0.5 0.8 1.0

PE protective masking

PCfilm


F-PT W SeriesPolyesterFilmWhite

0.025 0.050 0.075 0.100

•Pigmented white polyester (PET) films•Goodmechanicalproperties•Suitableforwiderangeofapplications•Economical and reliable•Commonlyused in the packaging industries

PETfilmTexture:NaturalGloss

OMPC SE21B / SE42B

FlameRetardantGradePolycarbonateFilms/Black

•Flame retardant gradePCfilms&sheets•Polished / textures and black•UL94V-0 approved;ULFileNo.E249605•Mostsuitableformakingelectricalandheatinsulatorsetc.•Suitablefordie-cutprocess

0.05 0.075 0.1 0.125 0.175 0.25

0.375 0.43 0.5 0.76

OMPC V11 / 21 /41 / 42 / 32

Non-HalogenFlameRetardantGradePolycarbonateFilms/Clear

•Halogen-Free Flame retardant grade PCfilms&sheets•Polished / textures and clear translucent •UL94V-0 approved;ULFileNo.E249605•Mostsuitableformakingelectricalandheatinsulatorsetc.•Suitablefordie-cutprocess

0.1 0.125 0.175 0.2 0.25

0.3 0.375 0.43 0.5

OMPC V11B / 21B /41B / 42B / 32B

Non-HalogenFlameRetardantGradePolycarbonateFilms/Black

•Halogen-Free Flame retardant grade PCfilms&sheets•Polished / textures and black•UL94V-0 approved;ULFileNo.E249605•Mostsuitableformakingelectricalandheatinsulatorsetc.•Suitablefordie-cutprocess

0.05 0.075 0.1 0.15 0.175 0.2

0.25 0.3 0.375 0.43 0.5 0.76


PCfilm

Textured Surface


PCfilm

Textured Surface

Textured Surface

PCfilm

Textured Surface


PCfilm

Textured Surface


PCfilm

Textured Surface


PCfilm

Textured Surface


PCfilm

Textured Surface

Tensile Tester

ADH 5126HighTensilePolypropyleneTape

Chemical Resistant

C : 0.040 A : 0.025

•Designedforrechargeable Ni-Cd & Ni-MH cylindrical batteries leads insulation and wrapping purposes•High tensile strength; Low stretch properties•Very low in iron and high resistance to Alkaline Electrolyte•EconomicalandreliableSP

ECIA

L TA

PE

PolypropylenePP

Special PSA

ADH MD12F Series

Conductive Heat SensistiveMetalisedPolyesterTape

5,000 COND-ACR / HSA

•Shielding EMI/RFI•Grounding and draining noise signals for FFC & FPC•Volume Resistivity <0.1 Ohm/cm² •Connectswithoutsoldering•EconomicalcomparingtolaminatedFoil

Metalised PET Film

Conductive HSA

Release Paper

}Tape C : 0.012 A : 0.020 L : 0.150

Documents

PSTC 101 (Method A~E) 180° PEEL STRENGTH …edehege.com.sg/pdf/ADH Product General Catalogue-2011.pdfPSTC 101 (Method A~E) 180° PEEL STRENGTH Measuring Unit : N/24mm (Force/Width)