Project Report Hotel Management New

A Minor Project

On

“COLLEGE MANAGEMENT”

For Partial Fulfillment of Diploma Course

Submitted To: Submitted By:Er. Sonu Dhalwal

Er.Manoj Sharma Amrinder- 0704108801

Project In-Charge Ravi Mishra- 0704108802

Deepak Saini- 074108006

Gurmeet Singh- 074108011

Kundan- 074108023

Department of Computer Science & TechnologyP.D.M. INSTITUTE OF ENGINEERING AND TECHNOLOGY

Karsindhu (Safidon)-126112(Affiliated to SBTE (Haryana)-Panchkula)

ACKNOWLEDGEMENT

PAGE µ1§

The submission of this project gives both of us an opportunity to convey our gratitude

to all those who have helped us reach a stage where we have immense confidence

to launch our career in the competitive world of information technology.

We have no second thought in admitting that it is our respected Lecturers who have

played a significant role in shaping our career and we would be miserably failing in

our duty if we don’ extend our heart filled gratitude and sincere acknowledgement to

our project guide Er. Sonu Dhalwal, who has been a source of perpetual inspiration

to us, gently guiding and paving our way towards a bright career. Both were ever

willing to give us all kind of support and encouragement. We are also very thankful

to both for being an inspired project in charge and for providing necessary help

throughout our project work. We also want to thank Er. Manoj Sharma who helped

us a lot during the complete project by giving us his precious time.

And in the end we would like to thank our parents and the almighty God for all the

things that they did to us.

Amrinder

0704108801

Ravi Mishra

0704108802

Deepak Saini

074108006

Gurmeet Singh

074108011

Kundan

074108023

PAGE µ1§

CERTIFICATE

It is certified that all these Final year, Computer Engineering students of PDM Institute of

Engineering & Technology have completed their minor project “COLLEGE

MANAGEMENT” successfully on time. I found them sincere & hardworking. Their

performance during this project development period is excellent & I wish all of them

successful carriers.

Er. Sonu Dhalwal

Er.Manoj Sharma

Project In –charge

Amrinder

0704108801

Ravi Mishra 0704108802

Deepak Saini 074108006

Gurmeet Singh 074108011

Kundan 074108023

PAGE µ1§

Table of Contents

1. Introduction………………………………………………………….…...….5-7

2. Introducing College Management……………….…………………...…....... 8-10

3. System Analysis…………………………………… ….………..……..…11-12

4. Requirement Specification……………………………....................................13

5. Design Specification…………………………………………………........14-16

6. Software Engineering Paradigm Applied for the system……………........16-18

7. Introduction to VISUAL BASIC 6.0……………………………........…...19-26

8. Introduction to MS ACCESS 2003……………...…………….………….27-28

9. Project Output………………………………………………….………....29-38

10. DataBase Table………………………………………………....…….......39-42

11. Coding...……………………………………………………………..........43-52

12. Testing........................................................................................................ 53-54

13. Future Scope……………………………………………………….…………55

14. Limitation of Project……………………………………………....…....….…55

15. References………………………………………………………..…...………56

16. Bibliography……………………………………………………........…...…..57

PAGE µ1§

INTRODUCTION

1.1 Abstract :

The project “COLLEGE MANAGEMENT” is made to use that management working in

P.D.M.I.E.T. COLLEGE. This Project is help full to Register of New records into the

“COLLEGE”. This Project Contain mainly following section:-

1. VIEW SECTION.

2. ALTER SECTION

3. STAFF INFORMATION.

4. STUDENT INFORMATION.

5. TIME-TABLE INFORMATION.

6. STAFF RECORDS(ADD / MODIFY / DELETE)

7. STUDENT RECORDS(ADD / MODIFY / DELETE)

8. ATTENDENCE RECORDS(ADD / MODIFY / DELETE).

The upper “EIGHT” Forms are mainly used in this project. View Section is used to view the

information of staff and student and Alter Section is used to modify the records.In staff

information we saw the genral and salary of staff member.In student information we are able

to saw his/her recods about their performance ,fees and attendance. In “TIME

TABLE”Section we can see the lecture of all branches. IF a new lecturer is appointed to

college we can add its genral information by using alter section. IF a new Student is addmited

to college we can add its genral information by using alter section. By using the attendance

PAGE µ1§

section we can see the monthly attendance of the student and also prepare monthly attendence

percentage.

The Software VISUAL BASIC 6.0 is used as front end for the designing and programming

and to create user friendly GUI forms. Microsoft Access 2003 is used as backend to create

the data tables required to store the information. At present there is no such system which

helps in addition, ensure, alteration and demonstration of information to the client. So this

system facilitates us to perform all these functions rather straightforwardly with no

supplementary specialization required.

1.2 Scope :

1. The project stores all the information about the staff and students.

2. The management must be able to get details of all their information after storing.

3. It is simple to use and it is Graphical user interface.

4. The management can also be able to modify the information.

5. It has self explanatory form.

6. Management can check all the information of any staff member and student.

7. It is user friendly.

8. It is very easy to modify .

1.3 Platform :

This project has been developed in one of the most popular and user friendly Microsoft

Windows’ environment. The following components are also used for a successful user

friendly effective development of this project:

1. FRONT END:- VISUAL BASIC .

2. BACK END:-MS ACCESS 2003.

1.4 Methodology :

The following approach is used to design this system, which is called "classic life cycle" or

"Waterfall model". This linear sequential model suggests a sequential, systematic approach to

PAGE µ1§

system development that begins at the system level and progress through the analysis, design,

coding, testing and maintenance. The linear sequential model encompasses the following

activities:

1. System/ Information engineering and modeling.

2. System requirement analysis

3. Design

4. Code generation

5. Testing

6. Maintenance

WATER FALL MODEL

These above phases mark the progress of a system analysis and design effort. It is an orderly

set of activities conducted and planned for each development project. In most business

situations the activities are closely related, usually inseparable, and even the order may be

difficult to determine.

PAGE µ1§

Analysis

Design

Code

Testing

Maintenance

System

INTRODUCTION TO COLLEGE

MANAGEMENT

COLLEGE MANAGEMENT:--

This project(College Management) is made into the VISUAL BASIC 6.0 .It is used to

modify / add / delete.The data into the project after submission is store into the MS

ACCESS 2003.

. This Project Contain mainly following forms:-

1 VIEW SECTION.

2 ALTER SECTION

3 STAFF INFORMATION.

4 STUDENT INFORMATION.

5 TIME-TABLE INFORMATION.

6 STAFF RECORDS(ADD / MODIFY / DELETE)

7 STUDENT RECORDS(ADD / MODIFY / DELETE)

8 ATTENDENCE RECORDS(ADD / MODIFY / DELETE).

Detail of these forms…………

VIEW SECTION:- .

View Section is used to view the student and staff information their

salary information, genral information, attendance information of student.We can check

the semester wise information of student. We can also find the student who have not

deposit their fees at time. . This form is fill by the user in alter section and user can see

its data in view section..On this form there is a commend button by which we can select

PAGE µ1§

an id to see information . In this form there is some text boxes, command buttons,

labels, , combo box .

TEXT BOX:-A text box is use to receive the information from the user by typing into it. A

text box generally used in conjunction with a label

LABEL :-A label is a control used to display text on the form. The value of label button will

be given on design time or can be change on the run time.

COMMAND BUTTON:-A command button is used to initiate an action when user clicks on

it. The code for the action to be performed is provide by the programmer

COMBO BOX:-It is Similar to the list box. Most of what you know about list box will apply

to combo boxes. Item are added, Remove and clear with the add item, remove item and clear

method.

The user can fill following Fields

1. Name 2. Address3. Phone No4. Sem.5. Branch6. F.Name7. Roll No.8. Sex etc.

2. ALTER SECTION:- Alter section is used to add the

genral,fees,attendances,result information accoring to their needs.Manegement can

add,modify,delete the information about their staff.Lecter can add monthly attendensce.

1. E-id

2. Name

3. Depdt. NAme.

PAGE µ1§

4. Desgnation

5. Salary

6. Date of Joining

7. Qulification

8. Sex

9. Age

10. Add.

SYSTEM ANALYSIS

3.1 IDENTIFICATION OF NEED

This Project is use to store information of new visitors.

Into past the data will be stored into the conventional file system and it is very costly and

time consuming. IN today time have very importance. so, to save our time and money we

need this project .Because this project is used into the computer and store information into the

memory of computer, and save our TIME and MONEY.

3.2 PROBLEM ANALYSIS

Problem analysis is done to obtain a clear understanding of the needs of the users and what

exactly is desired from the software information and documentation and so forth. One of the

major problems during analysis is how to organize the information obtained that can be

effectively evaluated for completeness and consistency. Second major during analysis is

resolving the contradiction that may exists in the information from different sources.

3.3 FEASIBILITY ANALYSIS

PAGE µ1§

Feasibility of a system refers to the potentiality and workability of the system. A system is

said to be a feasible one if its development is beneficial to an organization.

Feasibility analysis is the process of analyzing the system so as to determine whether would

be feasible or not. Feasible analysis should be performed throughout the system development

life cycle.

3.4 FEASIBILITY CHECKPOINTS

Feasibility study is done at various points in the system development life cycle. The scope

and complexity of an apparently feasible project can change after the current problems are

fully understood, after the end-user’s needs have been defined in detail, or after the technical

requirements have been established. The project feasible at one stage may become infeasible

or less feasible at any other checkpoint.

Various checkpoints in the system development life cycle where feasibility study is

performed are:

1. Survey phase checkpoint

2. Study phase checkpoint

3. Selection phase checkpoint

4. Acquisition phase checkpoint

5. Design phase checkpoint

3.5 Hardware Requirements

Processor Pentium-IV

RAM 256 MB

Hard Disk 40 GB

3.6 Software Requirements

Front End VISUAL BASIC 6.0

Back End MICROSOFT ACCESS 2003.

PAGE µ1§

REQUIREMENT SPECIFICATION

PAGE µ1§

4.1 OUTCOME OF REQUIREMENT ANALYSIS (SRS)

1) There should some password validation to allow only authorized users to access

the system.

2) It will fulfill the perspective request of every user according to their requirements.

3) The administrator can also login from client side and can do all type of updation.

4) The administrator can do testing of server’s working as a client.

Requirement Gathering

Quick Design

Refine Requirement Build Prototype

Customer Evaluation

Design

Implement

Test

Maintain

PAGE µ1§

DESIGN SPECIFICATION

System design is the first step in software development, which needs careful and intricate

planning. It helps us to prepare detailed technical design of the application-based system. It is

based on Requirement Analysis. It provides the specification and design for system giving a

brief overview of user functions, requirements and their actual implementation.

5.1 DESIGN OBJECTIVES : The goal that was kept in mind while designing the system

are:

1. To make the system user friendly as much as possible.

2. To make the flow of program comprehensible to the user.

3. To have transparency in work i.e. show how everything is being

done by the system stepwise.

5.2 DATA FLOW DIAGRAM:

The DFD serve these purposes:

1. A D.F.D. clarifies system requirements and identifies transformations that will

become programs in system design.

2. It is the starting point of design phase that functionally decomposes the requirements

down to the lowest level of detail.

PAGE µ1§

Register User

5.3 ARCHITECTURAL DESIGN

Architectural design represents the data structure and program components that are required to

build the computer based system. It consider the structures and properties

Of the components that constitute the system and relationship that exist between all

architectural components of the system.

PAGE µ1§

5.4 PROCEDURAL DESIGN

Procedural design or component level design occur after data, architectural, and

interface design have been established. The intent is to translate the design model into

operational software. But the level of abstraction of the existing design model is relatively high,

and the abstraction level of the operational program is low.

SOFTWARE ENGINEERING PARADIGM APLIED FOR THE

SYSTEM

For this project we have used the incremental model paradigm. Because the company needs

to add functionality as per the need. We choose incremental model because this model

combines elements of the linear sequential model or water fall model (applied repetitively)

with the iterative philosophy.

When an increment model is used, the first increment is often a core product. That is basic

requirements are addressed, but many supplementary features (some known, other unknown)

remain undelivered. The core product is used by the customer and as a result of use and

evaluation; a plan is developed for the next increment.

PAGE µ1§

Incremental Model (Software Engineering Paradigm)

Software Engineering

1st Increment

Requirement Analysis

System Design

Implementation & testing

Operation & Maintenance

2nd Increment


System Design



3rd Increment


System Design



Incremental Model (Software Engineering Paradigm)

Software Engineering

1st Increment


System Design



2nd Increment


System Design



3rd Increment


System Design



6.1 Code efficiency

With the help of data abstraction it tried to reduce the code size as much as possible.

The information flow is made through arguments and returned values and global variables are

avoided as much as possible. Coding is maintained in terms of hierarchy of classes and can

be extended to greater code readability.

6.2 Optimization of Code

Optimization of code means improvement in performance to maximum extent.

Optimization coding is done in terms of multithreading software development. The design is

flexible as it permits the execution of the processes in simultaneous manner. The OOPS code

is more manageable. The server software is optimized to the best utilization of resources such

as CPU and main memory.

6.3 Validation check

In the software design, special attention is given to the validation of the data entry. All

the data entry is done keeping the validation check in mind. All the fields are checked for

consistency and integrity of the data. The module interfaces are checked for argument

validation and returned values. The validation is done in such an appropriate manner, so that

invalid data entry can be fully denied.

6.4 SYSTEM SECURITY MEASURES

In the development and operation of the software is protected against the intentional

disclosures. Various types of security provisions are applied so that unauthorized users can

not enter the system. The system is protected with individual password provision. The

requisite condition for using system is that you must be the valid (authorized) user of the

system.

PAGE µ1§

Introduction to VISUAL BASIC 6.0:

7.1 The Development Environment

Earning the ins and outs of the Development Environment before you learn visual basic is

somewhat like learning for a test you must know where all the functions belong and what their

purpose is. First we will start with

PAGE µ1§

7.1.1 labeling the development environment.

The above diagram shows the development environment with all the important points labeled. Many

of Visual basic functions work similar to Microsoft word eg the Tool Bar and the toolbox is similar

to other products on the market, which work off a single click then drag the width of the object

required. The Tool Box contains the control you placed on the form window. All of the controls that

appear on the Tool Box controls on the above picture never runs out of controls as soon as you place

one on the form another awaits you on the Tool Box ready to be placed as needed.

7.2 The project explorer window

The Project explorer window gives you a tree-structured view of all the files inserted into the

application. You can expand these and collapse branches of the views to get more or less detail

(Project explorer). The project explorer window displays forms, modules or other separators, which

are supported by the visual basic like classes and Advanced Modules. If you want to select a form on

its own simply double click on the project explorer window for a more detailed look. And

PAGE µ1§

It will display it where the Default form is located.

7.3 Properties Window

Some programmers prefer the Categorisized view of the properties window. By defaulting, the properties window displays its properties alphabetically (with the exception of the name value) when you click on the categorized button the window changes to left picture.

7.3.1 The Default Layout

When we start Visual Basic, we are provided with a VB project. A VB project is a collection of the

following modules and files.

The global module (that contains declaration and procedures)

The form module (that contains the graphic elements of the VB application along with the

instruction)

The general module (that generally contains general-purpose instructions not pertaining to

anything graphic on-screen)

The class module (that contains the defining characteristics of a class, including its properties

and methods)

The resource files (that allows you to collect all of the texts and bitmaps for an application in

one place)

On start up, Visual Basic will displays the following windows:

The Blank Form window

The Project window

PAGE µ1§

7.4Understanding the tool box.

You may have noticed that when you click on different controls the Properties Window

changes slightly this is due to different controls having different functions. Therefore more options are needed for example if you had a picture then you want to

Show an image. But if you wanted to open a Internet connection you would have to fill in the remote host and other such settings. When you use the command () you will find that a new set of properties come up the following will provide

PAGE µ1§

7.5 Opening an existing Visual Basic project.

Microsoft has included some freebies with visual basic to show its capabilities and functions. Dismantling or modifying these sample projects is a good way to understand what is happening at runtime. These files can be located at your default directory /SAMPLES/

To Open these projects choose 'Open Project' from the 'File' menu. Then Double click on

the samples folder to open the directory then Double click on any project to load it.

7.5.1 Opening a new visual basic file & Inserting Source code.

From looking at the examples it time to make your own application. Choose 'New Project'

from the 'File' menu. Use the blank form1 to design a simple interface for an estate agents

database, have some textboxes for names and other details. Insert some controls and make it

look professional. Textboxes can be used to store there name and other details, make sure

you put a picture box in for a picture of the house.

Now insert the following source code for your application.

Private Sub Form_Load ()

Picture1.Picture = LoadPicture("C:\Program Files\VB\Graphics\Icons\Misc\MISC42.ICO")

End Sub

7.5.2 Running and viewing the project in detail.

Once an application is loaded it can be run by click on the icon from the toolbar, to pause

press and to terminate use .

Once a project is loaded, the name of the form(s) that it contains is displayed in the project

window. To view a form in design mode, select the form required by clicking with

PAGE µ1§

In this example the project has been loaded and the maillist.frm has been selected for

viewing. This Ms Mail example project useds 6 forms and 1 modules.

In Design mode, when the form is viewed, the code attached to any screen object may be

inspected by double clicking on that object. The screen shots below show the interface of the Ms

Mail example (.../samples/Comtool/VBMail/MaiLLST.FRM) to view the code for this form

select from the project window item.

Private Sub SetupOptionForm (BasePic As Control)

BasePic.Top = 0

BasePic.Left = 0

BasePic.Visible = True

BasePic.enabled = True

OKBt.Top = BasePic.Height + 120

Me.width = BasePic.Width + 120

Me.Heigh = OkBt.Top + OkBt.Height + 495

End Sub

Button Properties for reference

,Command Button & labels properties

Property

Description

Name

The name of the object so you can call it at runtime

Back Color

This specifies the command button's background color. Click the Back Color’s palette

down arrow to see a list of common Windows control colors, you must change this to the

style property from 0 - standard to 1 - graphical

Cancel

Determines whether the command button gets a Click event if the user presses escape

Caption

Holds the text that appears on the command button.

Default

PAGE µ1§

Determines if the command button responds to an enter keypress even if another control has

the focus

Enable

Determines whether the command button is active. Often, you'll change the enable property

at runtime with code to prevent the user pressing the button

Font

Produces a Font dialog box in which you can set the caption's font name , style and size.

Height

Positions the height of the object - can be used for down

Left

Positions the left control - can be used for right

Mouse Pointer

If selected to an icon can change the picture of the mouse pointer over that object

Picture

Hold's the name of an icon graphic image so that it appears as a picture instead of a Button

for this option to work the graphical tag must be set to 1

Style

This determines if the Command Button appears as a standard windows dialog box or a

graphical image

Tab index

Specifies the order of the command button in tab order

Tab Stop

Whether the object can be tabbed to

PAGE µ1§

7.6 DATA TYPE SUMMARY

Visual Basic recognize following six types of variables as Numeric, String, Boolean, Date, Object, Variant.

NUMERIC

Like other Programming Language Visual Basic provide Numeric Variables. They are:- Integers, Single, double, Byte, Long, Currency

Integer Variables are used for the Non Fractional Values. It stores values in the range from – 32768 to 32767. Long Data type is used for the range –2147483648 to 2147483647. Single Data Type is used for Fractional Values from –3.402 e 38 to 1.40 e 45. Double Precision Floating Point Numbers is capable of containing values from –1.797 e 308 to 4.940 e 324 and positive numbers. Currency is used for fixed-point numbers with four decimal digits. It can represent numbers in the range –922377203685477.5808 to 922377203685477.5807. Byte data type is used for representing numbers from 0 to 255. String variables are used to store string type data.

BOOLEAN

Boolean Data Type stores True/ False values. Boolean variables are used in testing conditions.

DATE

Date and Time variables are stored internally in a special format, but you don’t need to know the exact format. Date variables are declared by following statements.

VARIANT

Special Types of Variables declare without any data type treated as variant they are capable of containing any type of value. If one can ski data type in variable declaration statement then variable will treated as a variant

INTRODUCTION TO DATABASE:

Definition of Database: A collection of inter- related data stored together without

harmful or unnecessary redundancy to serve multiple applications.

Definition of Database Management System: A collection of inter-related files and set

of ore-written programs that allow users to access and modify these files.

PAGE µ1§

Need of DBMS: DBMS needed in order to eliminate the disadvantage of a file based

system, which are as follows:-

(a) Data duplication

(b) No integrity checks

(c) Accuracy not possible

(d) Data not secure

(e) Quick retrieval not possible

Major functions of DBMS: The major functions of DBMS are as follows: -

(a) Ability to represent inherent data structure

(b) Ease of use

(c) Time related performance enhancement

(d) Minimal cost

(e) Minimal redundancy

(f) Search capability

(g) Integrity

(h) Data privacy and security

Advantages of DBMS:

(a) Centralized control

(b) Data independence allows dynamic changes and growth potential

(c) Data duplication elimination with controlled redundancy

(d) Data quality enhanced

(e) Security enforcement

(f) Security enforcement possible

PAGE µ1§

Disadvantages of DBMS:

(a) Problem associated with centralization

(b) Cost of hardware, software and migration

(c) Complexity of backup and recovery

Project Output:

LOADING FORM:-

1. This is the first form which is firstly appear on the running of project.

2. It contain some information about the project such as:

TOOL USED:

FRONT END:- VISUAL BASIC 6.0.

BACK END:- MS ACCESS 2003.

PROGRAMMER:

PAGE µ1§

9.2Login Form: After sometime a new form is loaded. Its name is loginform. In this form user

name and password is given by the user.

PAGE µ1§

9.3 VIEW SECTION:-

PAGE µ1§

PAGE µ1§

PAGE µ1§

PAGE µ1§

9.5 FORM5-:-

9.6 FORM-6:-

PAGE µ1§

FORM-7

PAGE µ1§

FORM-8

PAGE µ1§

9.7 FORM-9:-

PAGE µ1§

FORM-10:-

PAGE µ1§

FORM-11:-

PAGE µ1§

FORM-12:-

PAGE µ1§

ALTER SECTION:-

PAGE µ1§

FORM-13:-

PAGE µ1§

FORM:-14:-

PAGE µ1§

FORM-15:-

PAGE µ1§

FORM-16:-

PAGE µ1§

FORM -16:-

PAGE µ1§

FORM-17:-

PAGE µ1§

FORM-18:-

PAGE µ1§

FORM-19:-

PAGE µ1§

FORM-20:-

PAGE µ1§

FORM-21:-

PAGE µ1§

FORM-22:-

PAGE µ1§

FORM-23:-

PAGE µ1§

FORM-24:-

PAGE µ1§

FORM-25:-

PAGE µ1§

FORM-26:-

PAGE µ1§

PAGE µ1§

FORM-28:-

FORM-29:-

PAGE µ1§

FORM-30:-

PAGE µ1§

FORM-31:-

PAGE µ1§

FORM-34:-

PAGE µ1§

FORM-34:-

PAGE µ1§

FORM-35:-

PAGE µ1§

FORM35-:-

PAGE µ1§

FORM-35:-

PAGE µ1§

FORM-36:-

PAGE µ1§

FORM-:37-

PAGE µ1§

9.9 About Us Form

PAGE µ1§

This form only give information about the Programmer.

Data Base Tables

10.1 TIME-TABLE (TABLE)

PAGE µ1§

This Application form table. This table contains the fields—

SESSION which describe the year. SR NO is provided as primary key and it describes the Sr

no of the form., STUDENT ID which contains the id of that student, LAST DATE contains the

Last date for receipt of compete Application Form .NAME OF COLLEGE contains Name of

the college in which student take admission. BRANCH NO contain the number of the

branch .DATE OF ISSUE contain the date of submission of form.

NAME OF STUDENT contain the name of the student. F’NAME contain name of father.

M’NAME contain name of mother. NAME OF COURSE contain the name of the branch.

10.2 RESULT TABLE:-

PAGE µ1§

SALARY TABLE:-

PAGE µ1§

FEES INFORMATION TABLE:-

PAGE µ1§

.

.

GENERAL INFORMATION:-

PAGE µ1§

STAFF INFORMATION:-

PAGE µ1§

PAGE µ1§

1. Coding

Private Sub Command1_Click()If Text1.Text = "pdmprj" And Text2.Text = "pdmprj" ThenMsgBox "welcome to pdmiet safidon"Form2.ShowUnload Me

ElseMsgBox "invalid username or password"EndEnd IfEnd Sub

FORM2:Private Sub Command1_Click()Form3.ShowEnd Sub

Private Sub Command2_Click()Dim a, b As Stringa = InputBox("enter adminstrator user")b = InputBox("enter password")If a = "kundan" And b = "01234" ThenMsgBox "most welcome to alter section"Form8.ShowElseMsgBox "not authorised person"Exit SubEnd IfEnd Sub

Private Sub Command3_Click()Unload MeEnd Sub

Private Sub Command4_Click()EndEnd Sub

FORM 3:

PAGE µ1§

Private Sub Command1_Click()Form5.ShowEnd Sub





FORM 4







PAGE µ1§

FORM 5





FORM6

Private Sub Combo1_Click()Data1.RecordSource = "select * from tt"Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("class") ThenText1.Text = Data1.Recordset.Fields("fir")Text2.Text = Data1.Recordset.Fields("sec")Text3.Text = Data1.Recordset.Fields("trd")Text4.Text = Data1.Recordset.Fields("frh")Text5.Text = Data1.Recordset.Fields("ffh")Text6.Text = Data1.Recordset.Fields("six")Text7.Text = Data1.Recordset.Fields("sev")Text8.Text = Data1.Recordset.Fields("egt")End IfData1.Recordset.MoveNextLoopEnd Sub



Private Sub Label1_Click()

End Sub

PAGE µ1§

FORM8

Private Sub Command4_Click()

End Sub





FORM9





FORM10



PAGE µ1§





FORM-11

Private Sub Combo4_Click()Combo4.List = Data1.Recordset.fEnd Sub





FORM-12

Private Sub Command1_Click()Data1.RecordSource = "select * from sinfo"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("eid") = CInt(Text1.Text)Data1.Recordset.Fields("name") = Text2.TextData1.Recordset.Fields("dname") = Combo1.TextData1.Recordset.Fields("dest") = Combo2.TextData1.Recordset.Fields("sal") = CInt(Text3.Text)

PAGE µ1§

Data1.Recordset.Fields("qli") = Text4.TextData1.Recordset.Fields("sex") = Combo3.TextData1.Recordset.Fields("age") = CInt(Text5.Text)Data1.Recordset.Fields("doj") = CDate(Text6.Text)Data1.Recordset.Fields("add") = Text7.TextData1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""Combo1.Text = ""Combo2.Text = ""Combo3.Text = ""End Sub




End SubFORM-13

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sinfo")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("dname")Text3.Text = Data1.Recordset.Fields("dest")Text4.Text = Data1.Recordset.Fields("sal")Text5.Text = Data1.Recordset.Fields("qli")Text6.Text = Data1.Recordset.Fields("sex")Text7.Text = Data1.Recordset.Fields("age")Text8.Text = Data1.Recordset.Fields("doj")Text9.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoopEnd Sub

PAGE µ1§

Private Sub Command1_Click()Data1.RecordSource = ("select * from sinfo")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenData1.Recordset.EditData1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("dname") = Text2.TextData1.Recordset.Fields("dest") = Text3.TextData1.Recordset.Fields("sal") = CInt(Text4.Text)Data1.Recordset.Fields("qli") = Text5.TextData1.Recordset.Fields("sex") = Text6.TextData1.Recordset.Fields("age") = CInt(Text7.Text)Data1.Recordset.Fields("doj") = CDate(Text8.Text)Data1.Recordset.Fields("add") = Text9.TextData1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""Text8.Text = ""Text9.Text = ""End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sinfo"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("eid")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


PAGE µ1§

End Sub

FORM 14

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sinfo")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("dname")Text3.Text = Data1.Recordset.Fields("dest")Text4.Text = Data1.Recordset.Fields("sal")Text5.Text = Data1.Recordset.Fields("qli")Text6.Text = Data1.Recordset.Fields("sex")Text7.Text = Data1.Recordset.Fields("age")Text8.Text = Data1.Recordset.Fields("doj")Text9.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from sinfo")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenData1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""Text8.Text = ""Text9.Text = ""End Sub


Private Sub Command3_Click()End

PAGE µ1§

End Sub



End Sub

FORM-15






FORM-16

Private Sub Command1_Click()Data1.RecordSource = "select * from sal"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("eid") = CInt(Combo1.Text)Data1.Recordset.Fields("bs") = CInt(Text1.Text)Data1.Recordset.Fields("ta") = CInt(Text2.Text)Data1.Recordset.Fields("da") = CInt(Text3.Text)Data1.Recordset.Fields("ha") = CInt(Text4.Text)

PAGE µ1§

Data1.Recordset.Fields("gs") = CInt(Text5.Text)Data1.Recordset.Fields("ns") = CInt(Text6.Text)Data1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Combo1.Text = ""End Sub





End Sub

FORM -17

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sal")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("bs")Text2.Text = Data1.Recordset.Fields("ta")Text3.Text = Data1.Recordset.Fields("da")Text4.Text = Data1.Recordset.Fields("ha")Text5.Text = Data1.Recordset.Fields("gs")Text6.Text = Data1.Recordset.Fields("ns")End If

PAGE µ1§

Data1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from sal")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenData1.Recordset.EditData1.Recordset.Fields("bs") = CInt(Text1.Text)Data1.Recordset.Fields("ta") = CInt(Text2.Text)Data1.Recordset.Fields("da") = CInt(Text3.Text)Data1.Recordset.Fields("ha") = CInt(Text4.Text)Data1.Recordset.Fields("gs") = CInt(Text5.Text)Data1.Recordset.Fields("ns") = CInt(Text6.Text)Data1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sal"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("eid")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

PAGE µ1§

FORM-18

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sal")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("bs")Text2.Text = Data1.Recordset.Fields("ta")Text3.Text = Data1.Recordset.Fields("da")Text4.Text = Data1.Recordset.Fields("ha")Text5.Text = Data1.Recordset.Fields("gs")Text6.Text = Data1.Recordset.Fields("ns")End IfData1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from sal")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenData1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sal"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("eid")

PAGE µ1§

Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

FORM-19






FORM-20





Private Sub Command5_Click()

PAGE µ1§

Unload MeEnd Sub

FORM-21






FORM-22




PAGE µ1§



FORM-23


Private Sub Command2_Click()Data1.RecordSource = "select * from sgen"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("rollno") = CInt(Text1.Text)Data1.Recordset.Fields("name") = Text2.TextData1.Recordset.Fields("fname") = Text3.TextData1.Recordset.Fields("Branch") = Combo1.TextData1.Recordset.Fields("sem") = Combo2.TextData1.Recordset.Fields("sex") = Combo3.TextData1.Recordset.Fields("pno") = Int(Text4.Text)Data1.Recordset.Fields("add") = Text5.TextData1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Combo1.Text = ""Combo2.Text = ""Combo3.Text = ""End Sub



End Sub

FORM-24

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sgen")

PAGE µ1§

Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rollno") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("fname")Text3.Text = Data1.Recordset.Fields("class")Text4.Text = Data1.Recordset.Fields("sec")Text5.Text = Data1.Recordset.Fields("sex")Text6.Text = Data1.Recordset.Fields("pno")Text7.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoopEnd Sub


Private Sub Command2_Click()Data1.RecordSource = ("select * from sgen")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rollno") ThenData1.Recordset.EditData1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("fname") = Text2.TextData1.Recordset.Fields("Branch") = CInt(Text3.Text)Data1.Recordset.Fields("sem") = Text4.TextData1.Recordset.Fields("sex") = Text5.TextData1.Recordset.Fields("pno") = Int(Text6.Text)Data1.Recordset.Fields("add") = Text7.TextData1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""End Sub


Private Sub Form_Load()

PAGE µ1§

Dim a As IntegerData1.RecordSource = "select * from sgen"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rollno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

FORM-25

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sgen")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rollno") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("fname")Text3.Text = Data1.Recordset.Fields("class")Text4.Text = Data1.Recordset.Fields("sec")Text5.Text = Data1.Recordset.Fields("sex")Text6.Text = Data1.Recordset.Fields("pno")Text7.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoop

End Sub


Private Sub Command2_Click()Data1.RecordSource = ("select * from sgen")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rollno") ThenData1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""

PAGE µ1§

Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""

End Sub


Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sgen"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rollno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

FORM-26

Private Sub Command1_Click()Data1.RecordSource = "select * from sfee"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("rno") = CInt(Combo1.Text)Data1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("Branch") = CInt(Combo2.Text)Data1.Recordset.Fields("mon") = Combo3.TextData1.Recordset.Fields("fee") = CInt(Text2.Text)Data1.Recordset.Fields("tfee") = CInt(Text3.Text)Data1.Recordset.Fields("sfund") = CInt(Text4.Text)Data1.Recordset.Fields("total") = CInt(Text5.Text)Data1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Combo1.Text = ""Combo2.Text = ""Combo3.Text = ""End Sub

PAGE µ1§





End Sub

FORM-27

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sfee")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("class")Text3.Text = Data1.Recordset.Fields("mon")Text4.Text = Data1.Recordset.Fields("fee")Text5.Text = Data1.Recordset.Fields("tfee")Text6.Text = Data1.Recordset.Fields("sfund")Text7.Text = Data1.Recordset.Fields("total")End IfData1.Recordset.MoveNextLoop

End Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from sfee")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenData1.Recordset.Edit

PAGE µ1§

Data1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("class") = CInt(Text2.Text)Data1.Recordset.Fields("mon") = Text3.TextData1.Recordset.Fields("fee") = CInt(Text4.Text)Data1.Recordset.Fields("tfee") = CInt(Text5.Text)Data1.Recordset.Fields("sfund") = CInt(Text6.Text)Data1.Recordset.Fields("total") = CInt(Text7.Text)Data1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sfee"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

FORM-28

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sfee")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") Then

PAGE µ1§

Text1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("class")Text3.Text = Data1.Recordset.Fields("mon")Text4.Text = Data1.Recordset.Fields("fee")Text5.Text = Data1.Recordset.Fields("tfee")Text6.Text = Data1.Recordset.Fields("sfund")Text7.Text = Data1.Recordset.Fields("total")End IfData1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from sfee")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenData1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""End Sub





PAGE µ1§

End Sub

FORM-29

Private Sub Command1_Click()Data1.RecordSource = "select * from exam"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("emn") = Combo2.TextData1.Recordset.Fields("rno") = CInt(Combo1.Text)Data1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("total") = CInt(Text2.Text)Data1.Recordset.Fields("scr") = CInt(Text3.Text)Data1.Recordset.Fields("per") = Text4.TextData1.Recordset.Fields("result") = Combo3.TextData1.Recordset.Fields("grade") = Combo4.TextData1.Recordset.Fields("position") = Combo5.TextData1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Combo1.Text = ""Combo2.Text = ""Combo3.Text = ""Combo4.Text = ""Combo5.Text = ""

End Sub




PAGE µ1§


End Sub

FORM-30

Private Sub Combo1_Click()Data1.RecordSource = ("select * from exam")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("emn")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("total")Text4.Text = Data1.Recordset.Fields("scr")Text5.Text = Data1.Recordset.Fields("per")Text6.Text = Data1.Recordset.Fields("result")Text7.Text = Data1.Recordset.Fields("grade")Text8.Text = Data1.Recordset.Fields("position")End IfData1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from exam")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenData1.Recordset.EditData1.Recordset.Fields("emn") = Text1.TextData1.Recordset.Fields("name") = Text2.TextData1.Recordset.Fields("total") = CInt(Text3.Text)Data1.Recordset.Fields("scr") = CInt(Text4.Text)Data1.Recordset.Fields("per") = Text5.TextData1.Recordset.Fields("result") = Text6.TextData1.Recordset.Fields("grade") = Text7.TextData1.Recordset.Fields("position") = Text8.TextData1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""Text8.Text = ""

PAGE µ1§

End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from exam"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub


End Sub

FORM-31

Private Sub Combo1_Click()Data1.RecordSource = ("select * from exam")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("emn")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("total")Text4.Text = Data1.Recordset.Fields("scr")Text5.Text = Data1.Recordset.Fields("per")Text6.Text = Data1.Recordset.Fields("result")Text7.Text = Data1.Recordset.Fields("grade")Text8.Text = Data1.Recordset.Fields("position")End IfData1.Recordset.MoveNextLoopEnd Sub

Private Sub Command1_Click()Data1.RecordSource = ("select * from exam")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") Then

PAGE µ1§

Data1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""Text7.Text = ""Text8.Text = ""End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from exam"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub

FORM-32


Private Sub Command2_Click()Data1.RecordSource = "select * from att"Data1.RefreshData1.Recordset.AddNewData1.Recordset.Fields("rno") = CInt(Combo1.Text)Data1.Recordset.Fields("mon") = Combo2.TextData1.Recordset.Fields("name") = Text1.TextData1.Recordset.Fields("tad") = CInt(Text2.Text)Data1.Recordset.Fields("pa") = CInt(Text3.Text)Data1.Recordset.Fields("ab") = CInt(Text4.Text)Data1.Recordset.Fields("per") = Text5.Text

PAGE µ1§

Data1.Recordset.UpdateText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Combo1.Text = ""Combo2.Text = ""End Sub


Private Sub Form_Load()Dim a As IntegerData2.RecordSource = "select * from sgen"Data2.RefreshDo While Not Data2.Recordset.EOFa = Data2.Recordset.Fields("rollno")Combo1.AddItem (a)Data2.Recordset.MoveNextLoop

End Sub

FORM-33

Private Sub Combo1_Click()Data1.RecordSource = ("select * from att")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("mon")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("tad")Text4.Text = Data1.Recordset.Fields("pa")Text5.Text = Data1.Recordset.Fields("ab")Text6.Text = Data1.Recordset.Fields("per")End IfData1.Recordset.MoveNextLoopEnd Sub


Private Sub Command2_Click()Data1.RecordSource = ("select * from att")

PAGE µ1§

Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenData1.Recordset.EditData1.Recordset.Fields("mon") = Text1.TextData1.Recordset.Fields("name") = Text2.TextData1.Recordset.Fields("tad") = CInt(Text3.Text)Data1.Recordset.Fields("pa") = CInt(Text4.Text)Data1.Recordset.Fields("ab") = Text5.TextData1.Recordset.Fields("per") = Text6.TextData1.Recordset.UpdateEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""End Sub


Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from att"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub

FORM-34

Private Sub Combo1_Click()Data1.RecordSource = ("select * from att")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("mon")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("tad")Text4.Text = Data1.Recordset.Fields("pa")Text5.Text = Data1.Recordset.Fields("ab")Text6.Text = Data1.Recordset.Fields("per")

PAGE µ1§

End IfData1.Recordset.MoveNextLoopEnd Sub


Private Sub Command2_Click()Data1.RecordSource = ("select * from att")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenData1.Recordset.DeleteEnd IfData1.Recordset.MoveNextLoopText1.Text = ""Text2.Text = ""Text3.Text = ""Text4.Text = ""Text5.Text = ""Text6.Text = ""End Sub



FORM-35

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sinfo")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("dname")

PAGE µ1§

Text3.Text = Data1.Recordset.Fields("dest")Text4.Text = Data1.Recordset.Fields("sal")Text5.Text = Data1.Recordset.Fields("qli")Text6.Text = Data1.Recordset.Fields("sex")Text7.Text = Data1.Recordset.Fields("age")Text8.Text = Data1.Recordset.Fields("doj")Text9.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoop

End Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sinfo"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("eid")Combo1.AddItem (a)Data1.Recordset.MoveNextLoop

End Sub

FORM-36

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sal")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("eid") ThenText1.Text = Data1.Recordset.Fields("bs")Text2.Text = Data1.Recordset.Fields("ta")Text3.Text = Data1.Recordset.Fields("da")Text4.Text = Data1.Recordset.Fields("ha")Text5.Text = Data1.Recordset.Fields("gs")Text6.Text = Data1.Recordset.Fields("ns")End IfData1.Recordset.MoveNextLoopEnd Sub

PAGE µ1§



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sal"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("eid")Combo1.AddItem (a)Data1.Recordset.MoveNextLoopEnd Sub

FORM-37

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sgen")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rollno") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("fname")Text3.Text = Data1.Recordset.Fields("class")Text4.Text = Data1.Recordset.Fields("sec")Text5.Text = Data1.Recordset.Fields("sex")Text6.Text = Data1.Recordset.Fields("pno")Text7.Text = Data1.Recordset.Fields("add")End IfData1.Recordset.MoveNextLoopEnd Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from sgen"

PAGE µ1§

Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rollno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoop

End Sub

FORM-38

Private Sub Combo1_Click()Data1.RecordSource = ("select * from sfee")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("name")Text2.Text = Data1.Recordset.Fields("class")Text3.Text = Data1.Recordset.Fields("mon")Text4.Text = Data1.Recordset.Fields("fee")Text5.Text = Data1.Recordset.Fields("tfee")Text6.Text = Data1.Recordset.Fields("sfund")Text7.Text = Data1.Recordset.Fields("total")End IfData1.Recordset.MoveNextLoopEnd Sub




FORM-39

Private Sub Combo1_Click()

PAGE µ1§

Data1.RecordSource = ("select * from exam")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("emn")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("total")Text4.Text = Data1.Recordset.Fields("scr")Text5.Text = Data1.Recordset.Fields("per")Text6.Text = Data1.Recordset.Fields("result")Text7.Text = Data1.Recordset.Fields("grade")Text8.Text = Data1.Recordset.Fields("position")End IfData1.Recordset.MoveNextLoopEnd Sub



Private Sub Form_Load()Dim a As IntegerData1.RecordSource = "select * from exam"Data1.RefreshDo While Not Data1.Recordset.EOFa = Data1.Recordset.Fields("rno")Combo1.AddItem (a)Data1.Recordset.MoveNextLoop

End Sub

FORM-40

Private Sub Combo1_Click()Data1.RecordSource = ("select * from att")Data1.RefreshDo While Not Data1.Recordset.EOFIf Combo1.Text = Data1.Recordset.Fields("rno") ThenText1.Text = Data1.Recordset.Fields("mon")Text2.Text = Data1.Recordset.Fields("name")Text3.Text = Data1.Recordset.Fields("tad")Text4.Text = Data1.Recordset.Fields("pa")Text5.Text = Data1.Recordset.Fields("ab")

PAGE µ1§

Text6.Text = Data1.Recordset.Fields("per")End IfData1.Recordset.MoveNextLoop

End Sub




INFORMATION ABOUT COMMON BUTTONS PRESENT ON THE SCREEN

Command Buttons:-

FIRST: - When we click on the FIRST button then the First record Will be displayed.

NEXT: - When we click on the NEXT button then the Next record Will be displayed.

PAGE µ1§

PREVIOUS : - When we click on the PREVIOUS button then the Previous record will be displayed.

LAST : - When we click on the LAST button then the Last record Will be displayed.

ADD: - This button is used to add a new record in Database.

SAVE : -When we click on SAVE button Record will save in Database File.

DELETE: - This command button is used to delete the selected Record

CLOSE:- This command button is used to un load the form.

12. TESTING

Testing is a very critical aspect of the Software Quality Assurance (SQA) and

represents the ultimate review of specification, design and code generation .The design process

focuses on the logical internals of the software, ensuring that all the statements have been

tested and all the functional externals i.e. defined input will produce actual results that agree

with the required results.

There are two types of testing

1. WHITE BOX TESTING

2. BLACK BOX TESTING

WHITE BOX TESTING

It is also called as glass-box testing. It is predicted on the close examination of the

procedural details. Here providing test cases that exercise specific sets of condition and for

loops tests the logical paths through the software. It demonstrate that each function operational

at the same searching for errors in each function.

BLACK BOX TESTING

This is also called as the behavioral testing and it focuses on the functional

requirements of the software. It enables the software engineer to derive set of input conditions

PAGE µ1§

that will fully exercise all functional requirements for a program. These sets are used to

demonstrate that software functions are operational and output is correctly produced and

integrity of external database is maintained. It helps to ensure that the internal operations are

performed according to specification and all components have been adequately exercised.

TESTING IN OUR SYSTEM

When our system will be fully operational we will perform the following types of tests:

1. INTEGRATION TESTING

2. VALIDATION TESTING

Moreover the user will be asked to used this system in parallel with their existing system and

notify the end user of any exceptions and errors that they experiences. The rectification of all

these will be the developer’s responsibility.

Just now we are implementing the incremental integrated testing, where the programs are

constructed and tested in small increments that facilitates the easier detection of the errors,

isolation and correction.

14. Limitation of the project

Every system may be developed by a professional can not be said to be ideal in its own. The

present project implement by us is not an exception. There are different types of constraints

that have led to a system with limitation. But these can be removed with some modification.

Because of limited time some of these limitations remain in system.

PAGE µ1§

The limitations of the project are described below:

1. We have not used Bus Facility form so Student can not register for bus facility from

this project

2. Student can not register for hostel join with this project.

15. REFERENCES

1. www.google.com

2. www.yahoo.com

16. BIBLIOGRAPHIES

The following BOOKS are used to make this project.

[1] VISUAL BASIC 6.0(Dhanpat Rai & Co.)

[2] BLACK BOOK

[3] MASTERING VISUAL BASIC 6

PAGE µ1§

PAGE µ1§

Documents

Project Report Hotel Management New