Program at a Glance - Indian Institute of Technology GuwahatiJonaki Mukherjee, Probal Kumar Das, Rajat Banerjee, Ashoke Ranjan and A.K. Saxena 11 Dec 2012 Session 4A (14.00-15.30)

Program at a GlanceDay 1, Saturday, 10th December 2012

10.00 - 13.00 Registration

14.00 - 14.30 Symposium Inaugural Session

14.30 – 15.00 High Tea

15.00 – 17.00 Session 1 Keynote Lectures

Day 2, Sunday, 11th December 2012

9.00 – 10.10Keynote and Invited

LecturesKeynote and Invited



Lectures

10.10 – 10.30 Tea Break

10.30 – 12.30Advanced Materials

Biomaterials and Bio-composites & Failure

AnalysisComposite materials Thin films and Coatings

12.30 – 14.00 Lunch Break

14.00 – 15.30 Composite materialsAdvanced Manufacturing

ProcessesNano-structured Materials Materials Characterization

15.30 – 16.00 Tea Break

16.00 – 18.00 Session Poster Presentation

18.00 – 21.00 Cultural Program and Dinner

Day 3, Monday, 12th December 2012





Lectures

10.10 – 10.30 Tea Break

10.30 – 12.00 Composite materials Thin films and CoatingsAdvanced Manufacturing

Processes

Modeling and Sim & Nano-Structured materials &

Semi Conductor materials

13.00 – 16.00 Boat Cruise in River Brahmaputra and Lunch

Day 4, Tuesday, 13th December 2012





Lectures

10.10 – 10.30 Tea Break

10.30 – 12.30 Composite materialsThin films and Coatings & Modeling and Simulation

Metals and Alloys & Advanced Manufacturing

ProcessesModeling and Simulation

12.30 – 13.00 Valedictory Function

Map: Important Destinations

Presentation Program

10 Dec 2012 Session 1 (15.00 – 17.00) Hall 1

15:00 - 16:00 KY-AM-02 Prof. Mitsuo NiinomiImprovement of Mechanical Strength of Titanium Alloys by Microstructural Refinement Down to Nano-Size through High Pressure TorsionMitsuo Niinomi, Masaki Nakai, Junko Hieda and Ken Cho

16:00 - 17:00 KY-NC-01 Prof. Anil K. BhowmickNatural and Synthetic Nanoparticles in Polymer Composites Anil K. Bhowmick

11 Dec 2012 Session 2A (09.00 – 10.10) Hall 1

09:00-09:40 KY-AM-01 Dr. B.C. PaiAdvances and Trends inMaterials and Process DevelopmentB.C. Pai and T.P. D. Rajan

09:40 -10:10 IN-MA-01 Dr. J.K. ChakravarttyEffect of alloying elements on Dynamic Recrystallization of Zirconium AlloysJ.K. Chakravartty, Rajeev Kapoor and Apu Sarkar

11 Dec 2012 Session 2B (09.00 – 10.10) Hall 2

09:00-09:40 KY-CM-02 Prof. Jung II SongCurrent Trend and Industrial Applications of Natural Fiber CompositesVenkata Prasad Chavidi and Song Jung II

09:40 -10:10 IN-MP-01 Dr. P P DateSheet Metal Formability and Dimensional ControlP P Date

11 Dec 2012 Session 2C (09.00 – 10.10) Hall 3

09:00-09:40 KY-CM-01 Dr. Mayank DwivediAssemblies of Advanced CompositesMayank Dwivedi

09:40 -10:10 IN-MMC-01 Dr. S R BakshiDevelopment of Al/CNT composites by powder metallurgy techniques-A Review

S. R. Bakshi

11 Dec 2012 Session 2D (09.00 – 10.10) Hall 4

09:00-09:40 KY-MP-02 Prof. Suhas JoshiPhysics-based Machining of Aerospace MaterialsSuhas Joshi

09:40 -10:10 IN-CM-02 Prof. M. KamarajTribological characterization of a Nickel Based Hardfacing AlloyD. Kesavan and M. Kamaraj

11 Dec 2012 Session 3A (10.30-12.30) Advanced Materials Session Chair: Prof. Mitsuo Niinomi Hall 1

10:30 - 10:45 AM_07 Oxygen Partial Pressure Influenced Structural, Electrical and Optical Behavior of Magnetron Sputtered CuNiO2 FilmsA. Sreedhar, M. Hari Prasad Reddy and S. Uthanna and J. F. Pierson

10:45 - 11:00 AM_08 Effect of Reduced Particle Size on Spin-Phonon and Magnetoelectric Coupling of Chemically Synthesized BiFeO3 NanocrystalsPankaj Poddar, Raja Das and Adhish Jaiswal

11:00 - 11:15 AM_13 Synthesis of Functionally Graded Materials by Centrifugal Casting MethodA. D. Bhatt, Dinesh Kumar, Rajeev Srivastava and Anil G.Patil

11:15 - 11:30 AM_14 Selective long-wave infrared absorber formed by gold checkerboard on silicon dioxideJanardan Nath, Douglas Maukonen, Evan Smith, Pedro Figueiredo, Guy Zummo, Deep Panjwani, Robert E. Peale and Glenn Boreman

11:30 - 11:45 AM_17 Microstructural Evolution and High Temperature Mechanical properties of Hot Rolled Al-5% B4C CompositeSrinu Gangolu, A. Gourav Rao, N.Prabhu, B.P. Kashyap and V.P. Deshmukh

11:45 - 12:00 AM_21 Microstructural aspects of machinability of titanium alloysAsim Tewari, Pravin Pawar, Shashikant Joshi and Suhas Joshi

12:00 - 12:15 AM_22 Effect of Tantalum Substitution for Niobium on the Crystal Structure, Dielectric Properties of (K0.5Na0.5) NbO3 Single Crystal Grown by Flux MethodR. Saravanan, D.Rajesh, S.V. Rajasekaran, R. Perumal, M.Chitra, R.Jayavel

11 Dec 2012 Session 3B (10.30-12.30) Biomaterialsand Bio-composites & Failure Analysis

Session Chair: Prof. Massaki Nakai

Hall 2

10:30 - 10:45 BC_14 Effect of Processing Parameters in Grit Blasting of Machined Titanium Surface for Roughness GenerationAanchal Satija, Vijay Tiwari, Neelanchali Asija, Abhinav Sood and Naresh Bhatnagar

10:45 - 11:00 BC_18 Direct Laser Microgrooving of Ti6Al4V as a Surface Modification Method for Biological ImplantsPartha Saha, Sumanta Mukherjee and Santanu Dhara

11:00 - 11:15 BC_19 Core-Shell type nanoparticles for controlled release of hydrophobic drug and characterizationAkhtar Jahan Siddiqa, Koel Chaudhury and Basudam Adhikari

11:15 - 11:30 BC_22 Nano Hybrid Cationic Cellulose-Graphene Oxide Scaffolds for Tissue Engineering Applications Sangram Keshari Samal, Mamoni Dash and Peter Dubruel

11:30 - 11:45 BC_23 Biomineralization Study of Chitosan Based Polyelectrolyte ComplexesMamoni Dash, Sangram Keshari Samal and Peter Dubruel

11:45 - 12:00 BC_27 Biomilling technique for the size reduction of iron oxide particlesPankaj Poddar and Chandrashekhar Sharan

12:00 - 12:15 FA_04 Development of Cutting tool condition monitoring system using virtual instrumentationChelladurai H, Sahu Kr. Neelesh and K.K.S. Pandian

12:15 : 12:30 FA_10 A Square Cup Test to Establish Parameters for Diagnosing Failure in Formed Sheet Metal ComponentsParag Marathe and P. P. Date

11 Dec 2012 Session 3C (10.30-12.30) Composite materialsSession Chair: Prof. Joong Hee Lee Hall 3

10:30 - 10:45 CM_46 Infiltration Assisted Processing of Oxide Bonded Porous Sic CeramicsAtanu Dey, Nijhuma Kayal and Omprakash Chakrabarti

10:45 - 11:00 CM_48 Retention of Optical Clarity Of Polycarbonate In Polycarbonate/Clay NanocompositesB B Khatua and Supratim Suin

11:00 - 11:15 CM_53 Generic method to prepare ultra-small transition metal nanoparticles Jhumur Seth and B. L.V. Prasad

11:15 - 11:30 CM_54 Copper Chloride Doped Polyaniline/ Multi-Walled Carbon Nanotubes Nanocomposites for Supercapacitor ApplicationsSaptarshi Dhibar, Sumanta Sahoo, C. K. Das

11:30 - 11:45 CM_55 Gas Separation by Inorganic Composite MembraneBishnupada Mandal and Sanjib Barma

11:45 - 12:00 CM_59 Autocatalytic Processing and Characterization of B4C and Al2O3 Co-deposited Ni-B Composite Coating for Wear and Corrosion Resistance ApplicationsT.P.D. Rajan, Deepa J.P., M. Bencela, C. Pavithran and B.C. Pai

12:00 - 12:15 CM_94 New development of Potato Starch/PMMA green composites & Essential work of fractureS. Mahammad Ali and G.Unnikrishnan

12:15 : 12:30 CM_95 Fabrication and Characterisation of Aligned and Functionalised Nanotube Polymer CompositesSmrutisikha Bal, Snigdha Bhattacharjee and Sunirmal Saha

11 Dec 2012 Session 3D (10.30-12.30) Thin films and CoatingsSession Chair: Prof A Srinivasan Hall 4

10:30 - 10:45 FC_05 Parametric Optimization and Prediction of Surface Roughnessof Electroless Ni-P Coating Using Differential Evolution AlgorithmJhumpa De, Sagnik Biswas, Pratyusha Rakshit and Rajat Subhra Sen

10:45 - 11:00 FC_07 Soft and hard multilayers of silicon carbon nitride using single target for hard and tough coatings by magnetron sputtering: a novel approachRicha Mishra and Suman Kumari Mishra

11:00 - 11:15 FC_09 Systematic comparison of surface coatings for protein microarraysSaravana Sundar T, Aghilesh K and Meka Shyam Sundar L

11:15 - 11:30 FC_10 Transport properties of Al|MoO3|P-CdTe|Al sandwich structuresA.C. Sarmah

11:30 - 11:45 FC_12 Study of sol-gel thin film based tin oxide sensor for combustible gas detectionS. Kundu, A. Sarkar, Md. Mursalin, M. Narginary and A. Sen

11:45 - 12:00 FC_14 Liquid Polycarbosilane derived hard coatings of SiC on silicon(111) wafer at different temperaturesJonaki Mukherjee, Probal Kumar Das, Rajat Banerjee, Ashoke Ranjan and A.K. Saxena

11 Dec 2012 Session 4A (14.00-15.30) Composite materialsSession Chair: Prof. Debes Bhattacharya Hall 1

14:00 - 14:15 CM_61 Prediction of surface roughness in drilling of Metal Matrix Composites using ‘ANFIS’Sarbjit Singh, Inderdeep Singh and Akshay Dvivedi

14:15 - 14:30 CM_65 Effect of Iron metal particles on the magnetic properties of Ni 0.4 Zn 0.6 e2O4-Fe-PVDF compositesSadhana Katlakunta

14:30 - 14:45 CM_67 Effect of carbon nanotube (CNT) diameter on the dispersion by ball milling and mechanical properties of Al-CNT compositesDr. Srinivasa Rao Bakshi, Prathap Chandran, Shyam Kumar, Niraj Chawake, N. Karthiselva, Niraj Nayan and SVS Narayana Murty

14:45 - 15:00 CM_68 Microstructure and Optical properties of CeO2/ZrO2 Nano multilayer Thin films Prepared by Pulsed Laser DepositionG.Balakrishnan

15:00 - 15:15 CM_69 An attempt on synthesis of Fe-Cementite nanocomposites from Fe-CNT powders by powder metallurgy techniquesSrinivasa Rao Bakshi, Prathap Chandran, Sunita Patra, Niraj Chawake, Shyam Kumar, N. Karthiselva, S. L. Pramod and Niraj Nayan

15:15 - 15:30 CM_71 Process Optimization of FRP Composite Sandwich StructureVijay Kumar, Sanjay Choudhry, Satya Ranjan Das

11 Dec 2012 Session 4B (14.00-15.30) Advanced Manufacturing ProcessesSession Chair: Prof. Suhas Joshi Hall 2

14:00 - 14:15 MP_12 Prediction of flow stresses in adiabatic shear band in machining of titanium alloysSuhas S. Joshi, Shashikant Joshi, Pravin Pawar and Asim Tewari

14:15 - 14:30 MP_17 Study on Erosion Wear Behavior of Laser Rapid Manufactured Tungsten Carbide Reinforced Nickel Matrix on 316L Stainless SteelC.P.Paul, S K Mishra, C H Premsingh, P Bhargava and L M Kukreja

14:30 - 14:45 MP_20 Correction of bending angle of mechanically bent stainless steel samples using fibre laser

Shitanshu S. Chakraborty, Prasanth K, Pushkar Singh, Yuvraj K. Madhukar and Ashish K. Nath

14:45 - 15:00 MP_24 Ultrasonic vibration assisted hole making in glass-epoxy laminatesKishore Debnath, Inderdeep Singh and Akshay Dvivedi

15:00 - 15:15 MP_27 Multi-response optimization for quality features in ED-drilling on hybrid metal matrix compositeAbhishek Singh, Pradeep Kumar and Inderdeep Singh

15:15 - 15:30 MP_28 Prediction of Material Removal Rate in Rotary Tool Electrical Discharge Machining of Al6063 SiCp metal matrix composite Using Fuzzy LogicsU. K. Vishwakarma, A. Dvivedi and P. Kumar

11 Dec 2012 Session 4C (14.00-15.30) Nano-structured MaterialsSession Chair: Dr. Mrinal Pal Hall 3

14:00 - 14:15 NS_10 Hydrothermally Prepared Tm2o3 Nanoparticles For Total Cholesterol EstimationAppan Roychoudhury and Bharati Rudrapaul

14:15 - 14:30 NS_24 Impedance spectroscopy analysis of Cr doped BiFeO3 nanoceramicsShrabanee Sen, P.Sahu, M.D Mursalin and A.Sen

14:30 - 14:45 NS_40 In situ electrochemical organization of CdSe nanoclusters on graphene during unzipping of carbon nanotubes Vijayamohanan K Pillai, Joyashish Debgupta and Dhanraj B Shinde

14:45 - 15:00 NS_43 Development of doped luminescent nanoparticles for solar spectrum modificationSanta Chawla, Vineet Kumar Duhan, Parvaz, Atif Khan

15:00 - 15:15 NS_45 Quantification of metallic nanoparticle morphologies with tilt-series imaging by transmission electron microscopyAniruddha Dutta and Helge Heinrich

15:15 - 15:30 NS_47 Room Temperature Ferromagnetic Ordering In Co Doped ZnO Nanorods prepared by A Solvothermal RouteBappaditya Pal, P. K. Giri and Deepali Sarkar

11 Dec 2012 Session 4D (14.00-15.30) Materials CharacterizationSession Chair: Prof. R.C. Prasad Hall 4

14:00 - 14:15 MC_05 Reduction of Extra Phasesin BiFeO3 By Simultaneous Doping in Bi And Fe Sites Manoranjan Kar, Chandrakanta Panda and Pawan Kumar

14:15 - 14:30 MC_06 Chemical Synthesis of Grain like ZnO Nanostructure Bhaskarjyoti Bodo, Binapani Goswami, and Ranjit Singha

14:30 - 14:45 MC_09 Structural and Luminescence Properties of Chemically Synthesized CdS Nanoparticles ClusterDavid Pegu, Bhaskarjyoti Bodo, Sidananda Sarma and Utpal Sarkar

14:45 - 15:00 MC_11 Modification of Ferroelectric Properties on PZT near MPB by Nd Doping in Place of PbManoranjan Kar, Paramjit Kour, S. K. Sinha and Pawan Kumar

15:00 - 15:15 MC_12 Dielectric and magnetic studies of Ni substituted lithium ferrites prepared by citrate precursor methodIbetombi Soibam, N Neelima and Sumitra Phanjoubam

15:15 - 15:30 OS_11 Performance Studies on a Double-Stage Metal Hydride based Hydrogen Compressor

B. Satya Sekhar and P. Muthukumar


09:00-09:40 KY-NC-02 Prof.Joong Hee LeeSurface Modification of Graphene for Composite ApplicationsTapas Kuila and Joong Hee Lee

09:40 -10:10 IN-NS-01 Dr. Mrinal PalImproved multiferroic properties of nanocrystalline BFOMrinal Pal


09:00-09:40 KY-FC-01 Prof. Debes BhattacharyyaSynthesis, Reduction and Characterization of Graphene Oxide FilmsVelram Balaji Mohan, Dongyan Liu and Debes Bhattacharyya


09:00-09:40 KY-AM-02 Prof. Masaki NakaiImprovement of Mechanical Strength of Titanium Alloys by Microstructural Refinement Down to Nano-Size through High Pressure TorsionMitsuo Niinomi, Masaki Nakai, Junko Hieda and Ken Cho

09:40 -10:10 IN-BC-02 Dr. H K VarmaDevelopment of Bio-Active Materials for Clinical Applications: A Sri Chitra ExperienceH.K. Varma


09:00-09:40 KY-FA-01 Prof. R C PrasadInfluence of Hydrogen-Deformation Interaction on Fracture Toughness and Fracture Behavior of SteelsR.C. Prasad

09:40 -10:10 IN-NS-02 Dr. M KakatiA Supersonic Plasma Jet Assisted Experimental Reactor Configuration for Rapid Synthesis of Some High Temperature NanomaterialsM. Kakati and N Aomoa

12 Dec 2012 Session 6A (10.30-12.00) Composite MaterialsSession Chair: Session Chair: Dr. G.P. Kothiyal Hall 1

10:30 - 10:45 CM_10 Particle dispersion studies in a polymer composite using copolymer grafted nanoparticles: A study using Molecular Dynamics simulationsSuchitra Sen

10:45 - 11:00 CM_24 Effect of Temperature and Mixing Ratio on the Processing Behavior of Fumed Nano Silica DispersionsNeelanchali Asija, Abhishek Gandhi, S.J.A. Rizvi and Naresh Bhatnagar

11:00 - 11:15 CM_25 Development of a novel Al-Zn-Mg-Cu Alloy Hybrid Metal Matrix Composites: A StudyS Gopalakannan and T Senthilvelan

11:15 - 11:30 CM_29 Manufacturing of Cf-CNT- Reinforced, Epoxy-Matrix Hybrid Composite by Hand Lay Up TechniqueK. Chandrasekhar, M. Sai Priya, M. Naveen Kumar, N. Krishna Kanth, Anil Kumar and B. Anjaneya Prasad and N. Eswara Prasad

11:30 - 11:45 CM_37 Optimization of Process Parameters for Shear Thickening Behavior - Study of the Effect of Specific Surface Area of Fumed Silica on its Rheological ResponseNeelanchali Asija, Abhishek Gandhi, S.J.A. Rizvi, Naresh Bhatnagar

11:45 - 12:00 CM_38 Tribo-Sustainable Performance of Bio-Shell and Bio-Fibre Embedded in Polymeric CompositesR. Md. Nasir, N. Husna, N. A. Ghazali, J.Chan, H.S.Wong and C.W. Lye

12 Dec 2012 Session 6B (10.30-12.00) Thin films and CoatingsSession Chair: Prof. Alika Khare

Hall 2

10:30 - 10:45 FC_17 Area dependent capacitive type moisture sensor for trace moisture detectionL. Kumar, T. Islam and S. A. Khan

10:45 - 11:00 FC_20 Indentation-creep study of multilayer hydrogenated DLC:N /DLC coating deposited by RF-PCVD methodS.K. Pradhan, Shubhra Bajpai, Sambita Sahoo and B.K.Mishra

11:00 - 11:15 FC_21 CVD diamond based windows: microstructure and optical propertiesSushmita Dey, Sambita Sahoo, Shubhra Bajpai, S.K Pradhan

11:15 - 11:30 FC_23 Electrically conducting covalently functionalized reduced graphene oxide black coatings on glassSourav Pramanik, Samar Kumar Medda, Goutam De

11:30 - 11:45 FC_24 Cathodically electrodepositable surface coating materials for the preparation of polymeric films based on multifunctional polyepoxidesPramod Kumar and Arun Maithani

11:45 - 12:00 FC_25 Sol-Gel Based ZnO-SnO2 Thin Films: Tailoring Properties by Varying Precursor Sol pHMoumita Pal, Susanta Bera and Sunirmal Jana

12 Dec 2012 Session 6C (10.30-12.00) Advanced Manufacturing ProcessesSession Chair: Prof. V.K. Jain Hall 3

10:30 - 10:45 MP_21 Analysis and optimization of Residual stress of AISI D2 by Non-destructive test after Electro-discharge machining(EDM) processDebasis Nayak and Suhrit Mula

10:45 - 11:00 MP_22 Neural Network integrated Genetic Algorithm for MOO of EDM Process on D2 steelShiba Narayan Sahu and Chandan Kumar Biswas

11:00 - 11:15 MP_25 Experimental investigations and parametric optimization in ultrasonic assisted turning of carbon steel: using Taguchi based Grey relational analysisBikash Chandra Behera, S.K.Sahoo and Arpan Kumar Mondal

11:15 - 11:30 MP_29 Surface Modification of Aluminium Using Tungsten-Copper Powder Metallurgical Compact Electrodes in EDMP.K. Patowari, Shubhajit Das and M. Eswara Krishna

11:30 - 11:45 MP_33 Investigation into the machinability characteristics of AISI 304 austenitic stainless steels using AlCrN coated cemented carbide insertsAtul P. Kulkarni, Sandeep Huddedar and Vikas G. Sargade

11:45 - 12:00 MP_35 Prediction of Heat Affected Zone Characteristics using Double Pulse (Pulse on Pulse) Gas Metal Arc WeldingManish Kokane, B. Basu and W.S. Rathod

12 Dec 2012 Session 6D (10.30-12.00) Modeling and Simulation,Nano-Structured Materials & Semi-Conductor materials

Session Chair: Prof T S Srivastan

Hall 4

10:30 - 10:45 MS_03 Effect of chelating agents on the physical properties of DyCrO3Pankaj Poddar, Richa Bhargava and Preeti Gupta

10:45 - 11:00 MS_09 Phase-formation and Superconductivity of the Y-Ba-Cu-O system with nano-size dopantsNikita Khokher, Swati Kumari, Swati Sharma and P L Upadhyay

11:00 - 11:15 NS_62 Fabrication of Porous Composite Nanostructures for Drug-Delivery ApplicationsS. I. Uribe Madrid, U. Pal, C.L. Gómez Muñoz

11:15 - 11:30 NS_66 Preparation and characterization of polystyrene sodium sulfate functionalized thermal exfoliated graphemeYan Yinan, Tapas Kuila, Ganesh Chandra Nayak and Joong Hee Lee

11:30 - 11:45 NS_68 Short chain alkyl amine-induced simultaneous functionalization and reduction of graphene oxideNam Hoon Kim, Tapas Kuila, Chunfei Zhang, Joong Hee Lee

11:45 - 12:00 SC_07 Graphene oxide based nonvolatile memory devices on SiO2/Si S. Mahaboob Jilani and P. Banerji

12:00 - 12:15 SC_10 Thermally deposited Ag-doped CdS TFTs with high – k rare-earth oxide Nd2O3 as gate dielectricParagjyoti Gogoi


09:00-09:40 KY-CM_03 Prof. Naresh BhatnagarSize Effect In the Transition of Micromechanics to Nanomechanics of Polymer CompositesNaresh Bhatnagar, Mohd. Hossein Alaei, Puneet Mahajan, Mathias Brieu and Djimendo Kondo

09:40 -10:10 IN-AM-01 Dr. R Tewari.Development of Nb–1%Zr–0.1%C alloy as structural components for hightemperature reactorsR. Tewari


09:00-09:40 KY-MP-01 Prof. Satish V KailasFriction Stir Welding/Processing and its intricaciesSatish V. Kailas


09:00-09:40 KY-MP-04 Prof. V K JainSome investigations into nano finishing of free form surfacesV K Jain

09:40 -10:10 IN-BC-03 Dr. Inderdeep SinghModeling and analysis of drilling behaviour of bio-composites Pramendra Kumar Bajpai, Inderdeep Singh and Jitendra Madaan


09:00 -09:30 IN-BC-01 Dr. G P KothiyalStructural, magnetic and antibacterial properties of some Zn and Fe containing silico-phosphate nano-crystalline bio-glass/glass-ceramics

G P Kothiyal

13 Dec 2012 Session 8A (10.30-12.30) Composite materialsSession Chair: Dr. B.C. Pai Hall 1

10:30 - 10:45 CM_76 Preferential Synthesis of Antibiotic Stabilized Au8 or Au10 NanoclustersPankaj poddar and Puneet khandelwal

10:45 - 11:00 CM_77 Electrical Resistance Change Method for Self Sensing of Damage in a CFRP BeamSajal Roy, Avinash Hood, N.G. Singh and Makarand Joshi

11:00 - 11:15 CM_83 Low Velocity Impact Behaviour of ThermoplasticsKumresh Kumar Gaur, Vijay Tiwari, Abhishek Gandhi, Mayank Dwivedi, Naresh Bhatnagar

11:15 - 11:30 CM_88 Synthesis and Characterization of Two Component Microcapsules and Evaluation of Their Self- healing Efficiency with EpoxyQi Li, Siddaramaiah, Nam Hoon Kim, Partha Khanra, Joong Hee Lee

11:30 - 11:45 CM_91 Design and Manufacturing of advanced textile structural composites B.K Behera and S.P Singh

11:45 - 12:00 CM_92 Analysis of solid particle Erosion wear response of BFS reinforced Epoxy composites using Artificial Neural NetworkPrasanta kumar Padhi and Alok Satapathy

12:00 : 12:15 AM_30 Experimental investigation of free vibration response of a Magneto rheological elastomer based sandwich beam with magnetic field at elevated temperatureS.S.K. Dwivedy, J. B. Sashtri and P.S. Robi

13 Dec 2012 Session 8B (10.30-12.30) Thin films and Coatings &Modeling and Simulation

Session Chair: Prof. Satish V. KailasHall 2

10:30 - 10:45 FC_27 Thermal gradient of glass-ceramic bonded thermal barrier coating systemSumana Ghosh, Kalyan Sundar Pal, Someswar Datta, Debabrata Basu and Gopes Chandra Das

10:45 - 11:00 FC_28 Electrical and photoelectrical properties of a-Ge20Te80-xBix (x = 0, 1.5, 2.5, 5.0) thin filmsAmbika Sharma and Anshu Kumari

11:00 - 11:15 FC_29 Effect of RF power on Growth, Micro-structural and Electrochemical properties of LiMn2O4 thin film cathodes Jayanth Babu

11:15 - 11:30 FC_30 Microstructure and Mechanical Properties of AlTiCrN, AlCrN Coatings Deposited by Cathodic Arc Eveporation (PVD) TechniqueSandeep Huddedar, Atul P. Kulkarni, Girish Joshi and Vikas Sargade

11:30 - 11:45 FC_31 Trace level H2S detection characteristics of rf sputtered SnO2 thin films with nanoscale thick CuO clustersArijit Chowdhuri, Vinay Gupta and Amit Garg

11:45 - 12:00 MO_33 Three-dimensional finite element analysis of staggered flow forming process Pushkar Mahajan, Hemant Shinde, Ramesh Singh, K.Narasimhan and K. Ramesh Kumar

13 Dec 2012 Session 8C (10.30-12.30) Metals and Alloys &Advanced Manufacturing Processes

Session Chair: Prof P S Robi

Hall 3

10:30 - 10:45 MA_15 The Extrinsic Influence of Welding Parameters on Microstructural Development and Mechanical Properties of Friction Stir Spot Welds of Aluminum Alloy 5052S. Soumya, S. Diviya and G. Thara, P. Jayachandra Reddy and Satish V. Kailas and T. S. Srivatsan

10:45 - 11:00 MA_16 Mechanism for the formation of defect free joints in Aluminum-copper by friction stir weldingR. Anbukkarasi and P. G. Venkata Krishnan, Satish V Kailas and T.S. Srivatsan

11:00 - 11:15 MA_20 Investment Casting of Al Alloy A356.0 Aircraft ComponentsB. Saha, P. Rambabu, Ch. V. A. Narsayya, N. Eswara Prasad and P. Tamboli

11:15 - 11:30 MA_21 Spin Glass Behaviour In MN2-XFEXNI2-Xcox Heusler AlloyManoranjan Kar and Pawan Kumar

11:30 - 11:45 MP_41 Effect of Cutting Environment on Surface Integrity in High-speed Ball End Milling of Inconel 718Bhopale Nandkumar N and Raju S. Pawade

11:45 - 12:00 MP_43 Growth of few layers graphene via Pulsed laser deposition technique using graphite targetIndrajeet Kumar and Alika Khare

13 Dec 2012 Session 8D (10.30-12.30) Modeling and SimulationSession Chair: Prof U S Dixit Hall 4

10:30 - 10:45 MO_04 Finite Element Analysis of weld induced residual stress of double sided fillet welded jointPankaj Biswas, Arpan Kumar Mondal, Rajesh Ranjan and Swarup Bag

10:45 - 11:00 MO_14 Compaction characteristics of the preform during the radial and linear infusion schemes during vacuum enhanced resin infusion technology (VERITy)Ajay Kumar and Mukul Shukla

11:00 - 11:15 MO_15 Numerical simulation of temperature and thermal stress distributions during laser Rapid manufacturing of multilayer Ti-SS transition jointA S Padiyar, Atul kumar, G Mundra and L M Kukreja

11:15 - 11:30 MO_17 Comparative numerical study on thick deposition process by Plasma and LaserSoumen Mandal and Subrata Kumar

11:30 - 11:45 MO_19 Growth dynamics of submonolayer Ag on Si(111) 7x7 surfaceArindam Pal, Samiran Pramanik and D. K. Goswami

11:45 - 12:00 MO_21 Dynamic Simulation and Optimizationof Extrusion Process for 2024 Aluminium AlloyKanhu Charan Nayak and Susanta Kumar Sahoo

10:30 - 10:45 MO_09 Artificial Neural Network Modeling to Predict High Temperature Flow Stress as a Function of Composition in Microalloyed Al-Cu-Mg Alloys Sanjib Banerjee, Aniket Chakraborty, Juthika Konwar, Lily Gogoi and Piush Agarwal

Documents

Program at a Glance - Indian Institute of Technology GuwahatiJonaki Mukherjee, Probal Kumar Das, Rajat Banerjee, Ashoke Ranjan and A.K. Saxena 11 Dec 2012 Session 4A (14.00-15.30)