PRODUCT OVERVIEW

Advanced System AutomationOne-touch antenna location and syncronizationDual axis motors realign for link acquisition

System AgnosticEnclosed and open-air optionsFully customizable setup allows for near universal list of antenna/radio con�gurations

Seamless InstallationTwo cables provide both motor control, and data connectivity

Rapid WWAN ProvisioningBATS uses an industry-�rst wireless search algorithm that scans the horizon for a compatible signal. Once targeting has occurred, the system scans the wireless lobes to locate the center point, providing quick network links at the highest throughput possible.

Dynamic System Tracking & StabilizationWith GPS Lobe Optimization, the system routinely checks connection health to detect and immediately counteract any drops or weaknesses in the wireless signal caused by interference, environmental changes, or sudden platform movement. As platform movement occurs, as seen during a mobile deployment, the system will recalibrate and adjust its position in real-time to compensate for directional changes of the base platform in both axis, azimuth and elevation.

Enhanced Control UnitRuggedized and rack mount con�gurationsSNMP Monitoring & Dynamic Service Level ValidationWWAN link management with available Link ManagerHTTPS/SSH/Telnet Management

BTS - 500

© 2012 Broadband Antenna Tracking Systems, Inc. All rights reserved. BATS Wireless and the BATS logo are pending trademarks of BATS, Inc. in the U.S. and/or various countries. All other trademarks are the property of their respective owners. Information in this document is subject to change without notice.

8902 Vincennes CircleIndianapolis, IN 46268

+1-888-955-8228Toll Free +1-317-500-4507Sales+1-317-500-4506Supportinfo@batswireless.comEmail

www.batswireless.com

BTS - 500PRODUCT SPECIFICATIONS

*Additional Components Required

PHYSICAL DIMENSIONS 17.47" (H) x 17.8" (W) x 12.28" (D)

WEIGHT 122 lb.

ENVIRONMENTAL Standardized to IP-67

OPERATING TEMP* -30°C to 55°C

PAN/TILT-AXIS RANGE* ±217.5° or 360° (slip ring) / 180° (±90°)

PAN/TILT-AXIS SPEED 0.001° - 20°/sec (PAN) 0.001° - 4°/sec (TILT)

LOAD TORQUE 500 lb-ft (680 Nm)

STATIC LOAD MAX 1260 lb. (571 kg)

STATIC TORQUE MAX 1500 lb-ft (2040 Nm)

PHYSICAL DIMENSIONS 3.5" (H) x 19" (W) x 13" (D)

WEIGHT 16 lb.

OPERATING TEMP* 0°C - 65°C (-40°C Option)

AC: 90 - 265 VAC; 47 - 63 Hz

DC: 10 - 36 VDC w/Auto

NETWORK PORTS (10/100/1000 Mbps)

GPS TARGETING STABILIZER GPS-Based Signal Targeting & Stabilization

FLEET CONTROLLER Control Appliance for Multiple Control Units

POSITIONING UNIT CABLING PU Power Cables, Available up to 330 ft.

MIL-SPEC CABLING Insulated Cat 5e Cabling, Available up to 330 ft.

MOUNTING HARDWARE Universal Pole Mount Kits, Radio Mount Kits

Speci�cationsPU 500 - Open-Air Positioning Unit - (500 lb. Payload)

RMCU 500 - Rack Mount Control Unit - for PU 500

OPERATING VOLTAGE

Components & Accessories

BTS - 500SYSTEM LAYOUT

ETHERNETPORTS

COOLINGFANS

POWERPORT

POWER CONTROLPORT

POWERSWITCH

BROADBANDRADIO

MOUNTINGBRACKET

PANELANTENNA

RMCU (2U Chassis)

Radio/Antenna Mount

POWER/CONTROLCABLE

ETHERNET

BROADBANDANTENNA

RMCU(2U Chassis)

PEDESTALPOLE MOUNT

POLE

ANTENNA/RADIOMOUNT

ETHERNET &POWER CONTROL

CABLES

PRODUCT OVERVIEW CONTROL UNITS

J1 J2J4

J5J3

TO NETWORK TO RADIO

GNDTO POSITIONING

UNIT

AC IN100 - 250 VAC

50-60HZ

DC IN10.5 - 34.5 VDC

POWER

ON

OFF

Rackmount Control Unit (2U) Hardened Control Unit

3.508.89

13.0033.02

16.7542.55

19.0048.26

11.1328.27

5.513.97

11.2528.58