PRODUCT DATASHEET Mirella series › datasheets › 1765529.pdf · CN12483_MIRELLA-50-S-DL Mirella-BXRA LS Metal 49.9 mm 23.9 mm Round PC - Glue Ready FWHM Efficiency cd/lm Gerber

PRODUCT DATASHEETMirella serieslast update 3/8/2012

Ordering number

FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus

C12476_MIRELLA-50-S

MirellaReflectorBXRA LSMetal49.9 mm23.9 mmRound PC - Glue Ready

FWHMEfficiencycd/lmGerber File

13 degrees 89 % 8.600 Available

Not compatible if PCB board fixed down by using screws.

Ordering number


CN13517_MIRELLA-50-S-CL

Mirella-BXRA LSMetal49.9 mm23.9 mmRound PC - - Ready




Ordering number


CN12483_MIRELLA-50-S-DL

Mirella-BXRA LSMetal49.9 mm23.9 mmRound PC - Glue Ready




Ordering number


C12477_MIRELLA-50-M





October 31st 2013 6:09 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3

Ledil Oy Salorankatu 10 24240 SALOFinland

http://www.ledil.com email: [email protected] FAX: +358-2-733 8001


Ordering number


C12478_MIRELLA-50-W





Ordering number


CN12484_MIRELLA-50-M-DL

Mirella-BXRA LSMetal49.9 mm24 mmRound PC - Glue Ready




Ordering number


CN12485_MIRELLA-50-W-DL

Mirella-BXRA LSMetal49.9 mm23.9 mmRound PC - Glue Ready




NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.





GENERAL INFORMATION

- Product series especially designed & optimized for BXRA LS series of LEDs. - Special care taken to make light distribution as uniform as possible.- Lens material optical grade PC with high UV and temperature resistance (120 degrees of Celcius / 248degrees of Fahrenheit). Allows use of high current and temperature conditions.

Please find more information about used materials from below:http://ledil.fi/sites/default/files/Documents/Technical/Material/PC%20Makrolon%202400_2407_2456_2458-UL.pdf- Reflector is made of aluminium coated PC (120 degrees of Celcius / 248 degrees of Fahrenheit) withprotective lacquer (110 degrees of Celcius / 230 degrees of Fahrenheit).

- Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glueoptions.http://www.ledil.com/datasheets/DataSheet_GLUES.pdf

NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the endproduct. For example, mechanical stress, vibration and holes on the surface of the circuit boarweaken the strength of the glue.

NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. Ifcleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LEDmanufacturer -this is important as cleaning shall under no circumstances damage LEDs or otherelectronics components on the PCB.

Further note that optical components shall not be cleaned with any chemicals - only micro fibercloth may be used to remove fingerprints or other traces from handling.




0%

25%

50%

75%

100%

-30-25-20-15-10-5051015202530

Relative intensity of CN13517_MIRELLA-50-S-CL-(LS)

AD

BC AD

32

3

2

41

4

1

DESIGNED BYpl

DATE25.11.2011

CHECKED BY DATE

DRAWN BYpl

DATE25.11.2011

This drawing is our property.It can't be reproducedor communicated withoutour written agreement.

SCALE 1:1 WEIGHT(g) SHEET 1/1

SIZE

A4DRAWING NUMBER REV

1

DRAWING TITLE

Ledil OySalorankatu 10FIN-24240 SALOFinland

Datasheet Mirella reflector

Material: PC, metal plated

49.9

23.9

3 9

20.7

1 4

1.5

6.3