Embed Size (px)
Citation preview
PRODUCT DATA SHEETSika AnchorFix®-1FAST CURING ANCHORAGE ADHESIVE
DESCRIPTIONSolvent and styrene free based, two-component poly-ester anchoring adhesive.Suitable for use in hot and tropical climatic conditions.
USESAs a fast curing anchoring adhesive for all grades of:
Rebars / reinforcing steel▪Threaded rods▪Bolts and special fastening systems▪Concrete▪Hollow and solid masonry▪Hard natural stone*▪Solid rock*▪
*These substrates may vary greatly, in particular withregard to the strength, composition and porosity.Thereforefor each application the suitability of SikaAnchorFix® -1 adhesive must be tested by applying asample area. Checking particular bond strength, sur-face staining and discoloration.
CHARACTERISTICS / ADVANTAGESFast curing▪Standard guns can be used▪Can be used at low temperatures▪High load capacity▪ETA Approval available▪Non-sag, even overhead▪Styrene-free▪Low odour▪Low wastage▪
APPROVALS / CERTIFICATESInjection system for use in masonry according toETAG 029, ETA-12/0227, Declaration of Performance020403010010000001 5034408, certified by notifiedproduct certification body 0679, certificate of con-stancy of performance 0679-DPD-0777, and providedwith the CE marking
▪
Bonded injection type anchor for non cracked con-crete according to ETAG 001 annex 1 and 5, ETA-13/0720, Declaration of Performance020403010010000001 5034408, certified by notifiedproduct certification body 1020, certificate of con-stancy of performance 1020-CPD-090-029816, andprovided with the CE marking.
▪
PRODUCT INFORMATIONPackaging 300 mL standard cartridge 12 cartridges per box
pallet: 75 boxes
Colour Component A: whiteComponent B: blackComponent A+B mixed: light grey
Stone colour:Component A: whiteComponent B: salmonComponent A+B mixed: beige
Product Data SheetSika AnchorFix®-1June 2017, Version 01.01020205010010000001
1 / 5
Shelf life 12 months from date of productionAll Sika AnchorFix®-1 cartridges have the expiry date printed on the label.
Storage conditions Stored properly in original, unopened, sealed and undamaged packaging indry conditions at temperatures between +5 °C and +25 °C. Protect from dir-ect sunlight.
Density ~1.63 kg/l (component A+B mixed)
TECHNICAL INFORMATIONCompressive Strength ~60 N/mm2 (7 days, +20 °C) (ASTM D 695)
Modulus of Elasticity in Compression ~3 500 N/mm2 (7 days, +20 °C) (ASTM D 695)
Tensile Strength in Flexure ~28 N/mm2 (7 days, +20 °C) (ASTM D 790)
Tensile Strength ~12 N/mm2 (7 days, +20 °C) (ASTM D 638)
Modulus of Elasticity in Tension ~4 500 N/mm2 (7 days, +20 °C) (ASTM D 638)
Temperature Resistance Long term +50 °CShort term (1-2 hours) +80 °C
Glass Transition Temperature +60 °C (DIN EN ISO 6721-1)
SYSTEMSSystem Structure For details about adhesive anchoring design refer to the separate docu-
mentation provided: “Technical Documentation Sika AnchorFix®-1”
APPLICATION INFORMATIONMixing Ratio Component A : component B = 10 : 1 by volume
Layer Thickness 3 mm max.
Sag Flow Non-sag, even overhead
Product Temperature Sika AnchorFix®-1 must be at a temperature of between +5 °C and +40 °Cfor application.
Ambient Air Temperature –10 °C min. / +40 °C max.
Dew Point Beware of condensation.Substrate temperature during application must be at least 3 °C above dewpoint.
Substrate Temperature –10 °C min. / +40 °C max.
Curing Time Temperature Open time - Tgel Curing time - Tcur
+30 °C 4 minutes 35 minutes+25 °C – +30 °C 4 minutes 40 minutes+20 °C – +25 °C 5 minutes 50 minutes+10 °C – +20 °C 6 minutes 85 minutes+5 °C – +10 °C 10 minutes 145 minutes+5 °C 18 minutes 145 minutes–10 °C 1 2 30 minutes 24 hours1 Minimum cartridge temperature +5 °C2 This application is not covered by the scope of the product ETA or any other approval.
Product Data SheetSika AnchorFix®-1June 2017, Version 01.01020205010010000001
2 / 5
APPLICATION INSTRUCTIONSSUBSTRATE QUALITY
Mortar and concrete must be at the required strength.No need to be 28 days old.Substrate strength (concrete, masonry, natural stone)must be verified.Pull-out tests must be carried out if the substratestrength is unknown.The anchor hole must always be clean, dry, free fromoil and grease etc.Loose particles must be removed from the holes.Threaded rods and rebars have to be cleaned thor-oughly from any oil, grease or any other substancesand particles such as dirt etc.
MIXING
Getting the cartridge ready: 300 mL / 550 mL
1. Unscrew the cap
2. Cut the film
3. Screw on the staticmixer
4. Place the cartridge in-to the gun and start ap-plication. When the workis interrupted the staticmixer can remain on thecartridge after the gunpressure has been re-lieved. If the resin hashardened in the nozzlewhen work is resumed, anew nozzle must be at-tached.
APPLICATION METHOD / TOOLS
Anchors in solid masonry/concrete:Drilling of hole with anelectric drill to the dia-meter and depth re-quired. Drill hole diamet-er must be in accordancewith anchor size.The drill hole must becleaned with a blowpump or by compressedair, starting from the bot-tom of the hole. (at least2x)Important: use oil-freecompressors.The drill hole must bethoroughly cleaned withthe special steel brush(brush at least 2x). Thediameter of the brushmust be larger than thediameter of the drill hole.The drill hole must becleaned with a blowpump or by compressedair, starting from the bot-tom of the hole. (at least2x)Important: use oil-freecompressors.The drill hole must bethoroughly cleaned withthe special steel brush(brush at least 2x). Thediameter of the brushmust be larger than thediameter of the drill hole.The drill hole must becleaned with a blowpump or by compressedair, starting from the bot-tom of the hole. (at least2x)Important: use oil-freecompressors.Pump approximatelytwice until both partscome out uniformly. Donot use this material. Re-lease the gun pressureand clean the cartridgeopening with a cloth.Inject the adhesive intothe hole, starting fromthe bottom, while slowlydrawing back the staticmixer. In any case avoidentrapping air. For deepholes extension tubingcan be used.
Product Data SheetSika AnchorFix®-1June 2017, Version 01.01020205010010000001
3 / 5
Insert the anchor with arotary motion into thefilled drill hole. Some ad-hesive must come out ofthe hole.Important: the anchormust be placed within theopen time.During the resin harden-ing time the anchor mustnot be moved or loaded.Wash tools immediatelywith Sika® Colma Cleaner.Wash hands and skinthoroughly with warmsoap water.
Anchors in hollow blocks:Drilling of hole with anelectric drill to the dia-meter and depth re-quired. Drill hole diamet-er must be in accordancewith anchor-and perfor-ated sleeve size.Note: with hollow materi-al do not use rotary ham-mer drills.The drill hole must bethoroughly cleaned with around brush (brush atleast 1x). The diameter ofthe brush must be largerthan the diameter of thedrill hole.The drill hole must becleaned after each clean-ing step with a blowpump or by compressedair, starting from the bot-tom of the hole (pump atleast 1x).Important: use oil-freecompressors.Insert perforated sleevecompletely into the drillhole.
Pump approximatelytwice until both partscome out uniformly. Donot use this material. Re-lease the gun pressureand clean the cartridgeopening with a cloth.Inject the adhesive intothe perforated sleeve,starting from the bottom,while slowly drawing backthe static mixer. In anycase avoid entrapping air.Close the cap from theperforated sleeve to
avoid some escape of theresin during entering thesteel rod.
Insert the anchor with arotary motion into thefilled perforated sleeve.Use the adequate steelrod size.Important: the anchormust be placed within theopen time.During the resin harden-ing time the anchor mustnot be moved or loaded.Wash tools immediatelywith Sika® Colma Cleaner.Wash hands and skinthoroughly with warmsoap water.
CLEANING OF EQUIPMENT
Clean tools and application equipment with Sika®Colma Cleaner immediately after use. Hardened /cured material can only be mechanically removed.
FURTHER INFORMATIONFor design details, please refer to the separate docu-mentation provided:Technical Documentation Sika AnchorFix®-1
BASIS OF PRODUCT DATAAll technical data stated in this Data Sheet are basedon laboratory tests. Actual measured data may varydue to circumstances beyond our control.
LOCAL RESTRICTIONSNote that as a result of specific local regulations thedeclared data and recommended uses for this productmay vary from country to country. Consult the localProduct Data Sheet for the exact product data anduses.
Product Data SheetSika AnchorFix®-1June 2017, Version 01.01020205010010000001
4 / 5
ECOLOGY, HEALTH AND SAFETYFor information and advice on the safe handling, stor-age and disposal of chemical products, users shall referto the most recent Safety Data Sheet (SDS) containingphysical, ecological, toxicological and other safety-re-lated data.
LEGAL NOTESThe information, and, in particular, the recommenda-tions relating to the application and end-use of Sikaproducts, are given in good faith based on Sika's cur-rent knowledge and experience of the products whenproperly stored, handled and applied under normalconditions in accordance with Sika's recommenda-tions. In practice, the differences in materials, sub-strates and actual site conditions are such that no war-ranty in respect of merchantability or of fitness for aparticular purpose, nor any liability arising out of anylegal relationship whatsoever, can be inferred eitherfrom this information, or from any written recom-mendations, or from any other advice offered. Theuser of the product must test the product’s suitabilityfor the intended application and purpose. Sika re-serves the right to change the properties of itsproducts. The proprietary rights of third parties mustbe observed. All orders are accepted subject to ourcurrent terms of sale and delivery. Users must alwaysrefer to the most recent issue of the local Product DataSheet for the product concerned, copies of which willbe supplied on request.
SikaAnchorFix-1-en-AE-(06-2017)-1-1.pdf
SIKA NORTHERN GULFBahrain / Qatar / KuwaitTel: +973 177 [email protected]
SIKA SOUTHERN GULFUAE / Oman / SICTel: +971 4 439 [email protected]
SIKA SAUDI ARABIARiyadh / Jeddah / DammamTel: +966 11 217 [email protected]
Product Data SheetSika AnchorFix®-1June 2017, Version 01.01020205010010000001
5 / 5
