Upload
sergio-vazquez
View
227
Download
2
Tags:
Embed Size (px)
DESCRIPTION
Diseno y Analisis de una pieza en SolidWorks utilizando la herramienta de SolidWorks Simulation realizando un analisis de elemento finito.
Citation preview
Instituto Tecnologico de Nuevo Laredo
Simulation of problema 41 sergioDate: miércoles, 10 de diciembre de 2014Designer: Sergio Alberto Vazquez RamirezStudy name: Static 1Analysis type: Static
Table of ContentsDescription...............................................1
Assumptions.............................................2
Model Information.....................................2
Study Properties.......................................3
Units.........................................................4
Material Properties...................................4
Loads and Fixtures...................................5
Connector Definitions...............................6
Contact Information..................................6
Mesh Information......................................7
Sensor Details..........................................7
Resultant Forces.......................................8
Beams......................................................8
Study Results............................................9
Conclusion..............................................23
DescriptionNo Data
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 1
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Assumptions
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 2
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Model Information
Study PropertiesStudy name Static 1
Analysis type Static
Mesh type Beam Mesh
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Result folder SolidWorks document (C:\Users\mi pc\Documents\diseño 2)
UnitsUnit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 3
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Material PropertiesModel Reference Properties Components
Name: Acero EndurecidoModel type: Linear Elastic
IsotropicDefault failure
criterion:Max von Mises Stress
Yield strength: 8.96e+008 N/m^2Tensile strength: 1.069e+009 N/m^2Elastic modulus: 2e+011 N/m^2Poisson's ratio: 0.29
Mass density: 7900 kg/m^3Shear modulus: 7.7e+010 N/m^2
Thermal expansion
coefficient:
1.5e-005 /Kelvin
SolidBody 1(Boss-Extrude2)(Part1),SolidBody 2(Boss-Extrude1)(Part1),SolidBody 3(Boss-Extrude3)(Part1)
Curve Data:N/A
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 4
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Loads and FixturesFixture name
Fixture Image Fixture Details
Immovable-1
Entities: 1 Joint(s)Type: Immovable (No
translation)
Immovable-2
Entities: 1 Joint(s)Type: Immovable (No
translation)
Load name Load Image Load Details
Force-1
Entities: 1 plane(s), 1 Joint(s)Reference: Front Plane
Type: Apply forceValues: ---, ---, -503.475 N
Moments: ---, ---, --- N.m
Force-2
Entities: 1 plane(s), 1 Joint(s)Reference: Top Plane
Type: Apply forceValues: ---, ---, 1370 N
Moments: ---, ---, --- N.m
Force-3
Entities: 1 plane(s), 1 Joint(s)Reference: Right Plane
Type: Apply forceValues: ---, ---, -359.625 N
Moments: ---, ---, --- N.m
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 5
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Load name Load Image Load Details
Force-4
Entities: 1 plane(s), 1 Joint(s)Reference: Top Plane
Type: Apply forceValues: ---, ---, -1370 N
Moments: ---, ---, --- N.m
Force-5
Entities: 1 plane(s), 1 Joint(s)Reference: Front Plane
Type: Apply forceValues: ---, ---, 5330 N
Moments: ---, ---, --- N.m
Force-6
Entities: 1 plane(s), 1 Joint(s)Reference: Right Plane
Type: Apply forceValues: ---, ---, -1370 N
Moments: ---, ---, --- N.m
Connector DefinitionsNo Data
Contact InformationNo Data
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 6
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Mesh InformationMesh type Beam Mesh
Mesh Information - DetailsTotal Nodes 77
Total Elements 73
Time to complete mesh(hh;mm;ss): 00:00:00
Computer name: MIPC-PC
Sensor DetailsNo Data
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 7
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Resultant Forces
Reaction ForcesSelection set
Units Sum XSum Y Sum Z Resultant
Entire Model N 1729.62 0 -4826.53 5127.08
Reaction MomentsSelection set
Units Sum XSum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-033
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 8
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Beams
Beam ForcesBeam Name
Joints
Axial(N)
Shear1(N)
Shear2(N)
Moment1(N.m)
Moment2(N.m)
Torque(N.m)
Beam-1(Boss-
Extrude2)
1 197.794
1855.09 205.5 640.475 1297.21 -3.68282e-024
2-
197.794
-1855.09 -205.5 -548 -21322.20018e-
023
Beam-2(Boss-
Extrude1)
1 -161.83 2358.56 -1164.5 5.24515e-007 1.05206e-006 -7.88903e-024
2 161.831
-2358.56 1164.5 -640.475 -1297.21 1.11634e-023
Beam-3(Boss-
Extrude3)
1 1370 5330 -1370 -4.99131e-009 2.37706e-008 -2.21036e-024
2 -1370 -5330 1370 548 2132 -5.15253e-024
Beam Stresses
Beam Name
Joints
Axial(N/m^2)
Bending Dir1(N/m^2)
Bending Dir2(N/m^2)
Torsional (N/m^2)
Worst Case(N/m^2
)
Beam-1(Boss-
Extrude2)
1 39349.8 1.27418e+007 -2.58072e+007 -3.66337e-020
2.88207e+007
2 39349.8 1.09021e+007 -4.24148e+007 2.18856e-019
4.38328e+007
Beam-2(Boss-
Extrude1)
1 -32195.1 0.0104349 -0.0209301 -7.84736e-020
32195.2
2 -32195.3 1.27418e+007 -2.58072e+007 1.11044e-019
2.88135e+007
Beam-3(Boss-
Extrude3)
1 -272553 9.92989e-005 0.0004729 -2.19868e-020
272553
2 -272553 1.09021e+007 -4.24148e+007 -5.12532e-020
4.4066e+007
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 9
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Study Results
Name Type Min MaxStress1 TXY: Shear in Y Dir. on YZ
Plane1.02465e+006 N/m^2Element: 52
4.4066e+007 N/m^2Element: 73
problema 41 sergio-Static 1-Stress-Stress1
Name Type Min MaxDisplacement1 URES: Resultant Displacement 0 mm
Node: 11.08653 mmNode: 54
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 10
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type Min Max
problema 41 sergio-Static 1-Displacement-Displacement1
Name TypeShear-Moment Plot1 Shear Force in Dir1
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 11
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type
problema 41 sergio-Static 1-Shear-Moment Plot-Shear-Moment Plot1
Name TypeShear-Moment Plot2 Shear Force in Dir2
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 12
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type
problema 41 sergio-Static 1-Shear-Moment Plot-Shear-Moment Plot2
Name TypeShear-Moment Plot3 Moment in Dir1
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 13
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type
problema 41 sergio-Static 1-Shear-Moment Plot-Shear-Moment Plot3
Name TypeShear-Moment Plot4 Moment in Dir2
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 14
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type
problema 41 sergio-Static 1-Shear-Moment Plot-Shear-Moment Plot4
Name Type Min MaxFactor of Safety1 Automatic 20.3331
Node: 1874.441Node: 53
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 15
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Name Type Min Max
problema 41 sergio-Static 1-Factor of Safety-Factor of Safety1
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 16
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-1
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 17
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-2
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 18
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-3
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 19
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-4
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 20
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-5
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 21
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-6
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 22
Instituto Tecnologico de Nuevo Laredo Sergio Alberto Vazquez Ramirez
10/12/2014
Image-7
Analyzed with SolidWorks Simulation Simulation of problema 41 sergio 23