Philips Occu Family‘A smart move’

Internal use only 1

Philips Occu Family‘A smart move’

An Introduction

• Product Overview

– Basic Functionality

– Installation

• OccuFamily Savings

• OccuSwitch Advanced

Presentation Overview

Internal use only 2

• OccuSwitch Advanced

• OccuSwitch Wireless

– Basic Functionality

– Installation

• OccuFamily USP’s

• Product/Pricing info

Motion-detection

• Detection Range- 6x8m, core 4x5m

– Retractable shield inbuilt

• Height- between 2.5 and 3.5m

• Adjustable time-out (1-30mins)

Product Overview- Basic Functionality

Internal use only 3

• Adjustable time-out (1-30mins)

• Smart-timer (+10mins)

Daylight Sensing

• Daylight Override (inc PD)

• Optional Daylight Switching

• Surface or recessed

• Load (Up to 6A)

Product Overview- Installation

LRH 1070: Sensor surface box

Internal use only 4

• Conventional or Wieland

• Compatible with any lamp/luminaire type

• Sensor Orientation

– Short side parallel to ‘Philips’ brand

LCC1070: Wieland Cable

Energy

• Up to 30% motion-detection

• Up to 40% with motion-detection and daylight sensing

Cost

OccuFamily Savings

Internal use only 5

Cost

• Typical 2/3 year payback

• Savings on:

– Installation

– Lamp Maintenance/Renewal

• Parallel Operation

– Max. 10 devices

– Separate bus signal

• Local Override

OccuSwitch Advanced (LRM 1080)

Internal use only 6

• Local Override

– Wall & hand-held

– Commissioning tool

• Absence Mode

– Disable automated switch on

– Remote Control

IRT 8010 (Wall) IRT 8050 (Hand-held)IRT 8099

(Commissioning tool)

• Same energy saving/payback story as rest of range

• ‘Quick installation for a long lasting system’

– Suited for retrofit/existing applications

– No sensor wiring- easy to install

– 10 year battery life

• Capacity (up to 6A)

OccuSwitch Wireless- Functionality

Internal use only 7

• Capacity (up to 6A)

– Up to 10 units (sensors/actuator) (up to 160m²)

– 3:1 (sensor : actuator) ratio for most applications

• LED indicators

– Feedback, configuration and operational status

• Battery life, sensor and actuator

• Walk (sensor location) & Wink (network) Test

• Components

– Wireless sensor (LRM 1763)

– Actuator (LRA 1750)

• Install

– Sensor

• Surface-mounted- adhesive

OccuSwitch RF/Wireless- Installation

(if present)

Internal use only 8

• Surface-mounted- adhesive

• Equipped with battery, no electrical installation

• Battery life- 10 years, AA

– Actuator

• Connected to mains at convenient point (230v)

• Wieland (LCC1720) or conventional (screwpoint)

Occu Range USP’s

Basic (LRM 1070) Advanced (LRM 1080) RF/Wireless (LRM 1763)

Detection-Core and Periphery-Square range

Parallel Operation Installation Flexibility-Few limitations on sensor/actuator positioning-No sensor wiring required-Adhesive mounted sensor for variable positioning

Retractable Shield Local Override & Absence Testing Capability

Internal use only 9

Retractable Shield Local Override & Absence Mode-IRT 8050 (wall), IRT 8010(hand)

Testing Capability-Walk-test- to find the best sensor location using illumination of LED-Wink-test- to test for connection between devices.

Smart-timer- Extend delay time by 10 mins if movement detected shortly afterswitched off.

Commissioning ToolIRT 8099-Set light level-Power-up behaviour etc

LED indicator-Feedback for sensor, actuator and battery life.

Core Product

Product Name Ordering Data

Basic OccuSwitch LRM 1070

Advanced OccuSwitch LRM 1080

Internal use only 10

Wireless Universal Actuator LRA 1750

Wireless Sensor LRM 1763

Product Name Ordering Data

Wieland Cable (Basic & Advanced) LCC 1070

Ceiling Mount Box LRH 1070

Advanced Commissioning Tool IRT 8099

Range Accessories

Internal use only 11

Local Control (Hand-held) IRT 8010

Local Control (Wall) IRT 8050

Wieland Cable (RF) LCC 1720