PhD Qualifying New Pattern

7/30/2019 PhD Qualifying New Pattern

1/7

Mechanical Engineering: PhD qualifying sub-areas (modified May 2012)

Design Engineering

Basic equations of theory of elasticity; elementary elasticity problems in two and threedimensions; theories of plastic flow; problems in plastic flow of ideally plastic and strain

hardening materials; theory of metal forming processes

Steady and transient Vibration of single and multi degree freedom systems. Systems withdistributed mass and elasticity. Non-linear and self excited vibrations, structural damping,

Random vibrations, vibration analysis, vibration control - reduction, isolation and vibrationabsorbers.

Introduction to creative design; user research and requirements analysis, product specifications,

Computer Aided Design; Standardization, variety reduction, preferred numbers and othertechniques; modular design; design economics, cost analysis, cost reduction and value analysis

techniques, design for production; human factors in design: anthropometric, ergonomic,

psychological, physiological considerations in design decision making; legal factors, engineering

ethics and society.

Reference Book(s)Timoshenko S. P. & Goodier J. N., Theory of Elasticity, 3rd Edition, Mc-Graw Hill, 1982.

J. Chakrabarty, Theory of Plasticity, Mc-Graw Hill Book Company, Singapore, 1987.Leonard Meirovith, "Elements of Vibration analysis", McGraw-Hill, Singapore, 1986Kevin Otto and Kristin Wood, Product Design: Techniques in Reverse Engineering and New Product

Development, 2004, Pearson Education, New Delhi

Thermal Engineering

Introduction and generalized governing equations, steady and unsteady heat conduction,

numerical modeling, melting and solidification problems, micro-scale heat conduction, internal

and external convective heat transfer, natural convection and scale analysis, natural convection inenclosures, multi-dimensional and unsteady conduction, , condensation, evaporation and boiling,

heat transfer by thermal radiation, analysis and design of heat exchangers.

Refrigeration cycle, refrigerants, compressors, oil in refrigerant circuits, condensers and cooling

towers, evaporators, expansion valves, controls and other circuit components, component

selection and balancing, installation and construction, distributed cooling and thermal storage,packaged units, food refrigeration and freezing, cold storage, refrigerated transport, handling and

distribution, refrigeration load estimate, industrial uses of refrigeration, air and water vapour

mixtures, air treatment, air-conditioning load estimation, air-conditioning methods, dehumidifiersand air drying, heat pumps and heat recovery, efficiency, running and carbon footprint.

Introduction of renewable energy, advantages, potential, status of development, broad details of

different renewable energy systems such as solar, wind, biomass, microhydel, geothermal etc;

Renewable energy development policy, Renewable energy industries, international co-operation,HRD and career growth opportunities, consultancy areas and future thrust areas in renewable

energy development.

Reference Book(s)A.Faghri, Y. Zhang and J. Howell, Advanced Heat and Mass Transfer, Global Digital Press, 2010.A. Mills, Heat Transfer, Prentice Hall, 2

ndEdition, 1998.


2/7

G. F. Hundy, A. R. Trott and T. C. Welch, Refrigeration and Air-conditioning, 4th Edition, Butterworth

and Heinemann (Elsevier), 2008.J. Twidell and T. Weir, Renewable Energy Resources, Taylor and Francis, 2nd Edition, 2006.

Fluid Engineering

Review of elementary viscous flow equations and classical aerofoil theory, Blasius's theorem,

Kutta-Joukowski theorem, Vortex motion, Kelvin's theorem, Helholtz vortex theorems,

instabilities of vortex patterns, very viscous flow, flow in a Hele-Shaw cell, Boundary Layer

theory, flow separation, Instabilities in fluid flow, Kelvin-Helmholtz instability, Rayleigh-BenardInstability, introduction to chaos and turbulence.

Review of the basic equations of fluid Dynamics, review of the analytical aspects of PDEs

(boundary conditions, maximum principles, boundary layer theory), Finite volume and finite

difference discretization, the numerical analysis of the stationary and nonstationary convectiondiffusion equation, the numerical analysis of the incompressible Navier Stokes equation, the

Gudonov and high resolution schemes to capture discontinuous solutions to the nonlinear scalar

conservation laws.

Introduction to Fluid power, advantages of fluid power, applications, Introduction to Pneumatics,

Air preparation and Components, Pneumatics Circuits and Applications, Electro pneumatics,

Electrical Controls for fluid power circuits, , Physical properties of hydraulic fluids, Energy andPower in Hydraulic Systems, Frictional Losses in Hydraulic Pipelines, Hydraulic Pumps,

Hydraulic Cylinders and Cushioning Devices, Hydraulic Motors, Hydraulic Valves, HydraulicCircuit Design and Analysis, Ancillary Hydraulic Devices, Hydraulic Conductions and Fittings,

Maintenance of Hydraulic Systems, Use of PLC programming for interfacing pneumatics and

Hydraulic Circuits.

Reference Book(s)D.J. Acheson, Elementary Fluid Dynamics, Oxford Applied Mathematics and Computing Science Series,2005.

Pijush K. Kundu, Ira M. Cohen, David R Dowling, Fluid Mechanics, 5th edition, Academic Press, 2011.

Pieter Wesseling, Principles of Computational Fluid dynamics, Springer, 2001.Randall J. Leveque, Finite-Volume methods for Hyperbolic Problems, Cambridge University Press, 2004.Esposito Anthony, Fluid Power with Applications, Prentice Hall of India

Manufacturing Engineering

Manufacturing properties of materials, Casting: pattern and mould, melting, gating design,cooling and solidification, defects in casting, miscellaneous casting operations, inspection of

castings. Forming: plastic deformation and yield criteria, tensile and shear yield stresses,

mechanics and process parameters of different bulk and sheet metal forming processes, hot andcold forming, friction and lubrication in metal forming, defects in metal forming. Welding &joining: princiles of solid phase and liquid phase welding, principles of solid/liquid state joining,

various joining operations, weld defects and inspection.

Generating motions of the machine tools, machines using single-point, multi-point and abrasivetools, mechanics of metal cutting, chip formation, machining forces and their measurement,

specific cutting energy, friction in metal cutting, plowing force and size effect, chip thickness,

analytical modeling of machining operations, analysis and measurement of temperatures in metalcutting, tool wear and tool life, effect of work material, tool material and tool geometry on tool

wear, high speed machining, hard machining, cutting fluids and surface roughness in machining,

economics of metal cutting operations, nomenclature of cutting tools, chip control, machine toolvibrations, grinding, design for machining, non-traditional machining processes and their

comparative performance.


3/7

Tool design methods, toolmaking processes, tooling materials and heat treatment, design of

cutting tools, gages and gage design, locating and clamping methods, design of drill jigs, design

of fixtures, design of sheet metal blanking and piercing dies, design of sheet metal bending,forming, drawing dies, using plastics as tooling materials, tool design for numerically controlled

machine tools, automatic screw machines.

Reference Book(s)

A. Ghosh and A. K. Mallik, Manufacturing Science, Affiliated East West Press, 2nd Edition, 2010.W. A. Knight and J. Boothroyd, Fundamentals of Machining and Machine Tools, Taylor & Francis(Special Indian Edition), 3rd edition, 2006.C. Donaldson, G. H. LeCain and V. C. Goold, Tool Design, Tata McGraw-Hill, 3rd Edition, 2008.

Materials, including Nano-materials and composites

Study of characteristics and technology of metals, plastics, rubbers, ceramics, polymers,composites, optical fibres and other modern engineering materials and their application with

particular reference to Railways. Destructive and non-destructive testing techniques.

Definition of composite materials; classification; particulates and dispersion hardened

composites, continuous and discontinuous fibre reinforced composites, metal-matrix composites,carboncarbon composites, molecular composites, micro and multilayer composites, theory of

reinforcement; reinforcement by continuous and discontinuous fibres, concept of microfibril;

effect of orientation and adhesion; mechanical behaviour of composites, stress-strainrelationship, strength, fracture thoughness and fatigue; properties of fibre reinforcement and

production technology of composites

Structural and stimuli dependent response of Materials, Property specific activities of Smart

material, Mechanical, Magnetic, optical, thermal smart material, Potential Application of Smart

material, Morphology and behavior of material at nanoscale, Fullerenes, Carbon nanotubes,

nanoparticles, Self-assembled monolayers, Supramolecules, Synthesis and characterization of

nanomaterials, Application of nanomaterial.

Reference Book(s)William F. Smith, Javal Hashemi, Foundations of Material Science & Engineering, Fourth edition,McGrawHill international edition, 2006

William D. Callister, Jr. Materials Science and Engineering: An Introduction, Sixth EditionAgarwal B.D. Analaysis and Performance of FibreComposites, John Wiley & Sons


4/7

Industrial Engineering and Optimization

Optimization of functions of one and many variables with and without constraints; Kuhn-Tucker

conditions; gradient methods; linear programming; simplex based and integer programmingmethods; duality theory; transportation and assignment problems; dynamic programming; branch

and bound methods; models of linear production systems, sequencing and scheduling, PERT,

CPM.

Introduction, operations and manufacturing strategy for competitive advantage, product designand planning, forecasting product demand, facilities location, process selection and design,

capacity planning, layout of facilities, job design and work measurement, aggregate planning,master manufacturing schedules, material requirements planning for dependent demand, short-

term schedules and shop floor control, independent demand inventory systems, logistics and

supply chain management, just-in-time systems, maintenance and reliability, qualitymanagement, managing projects, strategies for manufacturing excellence.

Introduction, maintenance systems, methods and tools of maintenance analysis, Reliability and

safety, maintainability, supportability, design for maintenance, maintenance integration,

computerized maintenance management systems, TPM, world-class maintenance systems, andmaintenance effectiveness and performance evaluation.

Reference Book(s)Hamdy A Taha, Operations Research: An Introduction, Pearson Education, Eighth Edition.

Rao S S, Engineering Optimization: Theory and Practice, John Wiley 2009Chase R.B, Jacobs F.R., Aquilano N.J. and Agarwal, N.K., Operations Management for CompetitiveAdvantage, 11th Edition, Tata McGraw-Hill Edition, 2006.Lindley R. Higgins and R. Keith Mobley: Maintenance Engineering Handbook,6th ed. Mcgraw-Hill, 2002.K.C. Kapur, and L.R. Lambersion: Reliability in Engineering Design, John Wiley & Sons, New York,

1977


5/7

Robotics and Mechatronics

Classification of robots and manipulators, fields of application, synthesis of planer and spatial

mechanisms, methods of function and path generation, coupler curve synthesis, linkages with

open loop, actuators and drive elements, microprocessor application and control of robots.

Concepts of measurement of electrical and non electrical parameters; displacement, force, pressure,

etc and related signal conditioning techniques, drives and actuators, concepts ofmicroprocessors/micro controllers architecture and programming, memory and I/O interfacing,

system design concepts.

Basic Concepts of MEMS, Design and Fabrication, Scaling Laws, Microsensors & Microactuatars,

Microfabrication, Micromanufacturing, Modeling in MEMS, Meterology in MEMS, Electronics in

MEMS, computer interfacing, Microfluidics, Microsystem design, MEMS Packaging.

Reference Book(s)R K Mittal and I J Nagrath, Robotics and Control, John Wiley 2008

J J Uicker, G R Pennock and J E Shigley, Theory of mechanisms and machines, OUP, 2011HMT, Mechatronics, Tata Mc-Graw Hill, New Delhi, 2008

Ananthasuresh, G K et al, Micro and smart systems, WSE, 2010Tai Ran Hsu, MEMS & Microsystems Design and Manufacture, Tata McGraw-Hill, 2006, Delhi.


6/7

Manufacturing Management

Fundamentals of continuous improvement, waste identification and elimination, small lot

production, setup time reduction, pull production, focused factories, cellular manufacturing,

quality of design, scheduling for smooth flow, performance measurement, green manufacturing

design, life cycle management and assessment, end of life strategies, sustainable business

models, sustainable practices and measurement.

Customer driven strategies in production and distribution systems; Integrated production &

distribution networks; SCM in the context of JIT and MRP-II; Distribution Resource Planning;Management of dealer networks; Total Quality Control & product innovation across the supplychain; Incoming logistics & supplier relationships; Value addition analysis; Metrics for

management of supply chain performance; Mathematical models and computer assisted decision

support for SCM; mathematical programming for SCM.

Basic concepts of probability and probability distributions, standard probability distribution,

sampling and sampling distributions, confidence intervals, testing significance, statistical

tolerance, various types of control charts, statistical process control techniques, value analysis,

defect diagnosis and prevention, basic concepts of reliability, reliability design evaluation andcontrol, methods of applying total quality management, production process, traditional quality

management, emerging quality standards, ISO 9000, Malcom Baldridge Award, Topmanagement commitment and involvement, customer involvement, quality function deployment,designing and controlling production processes and improving process capability, reliability

concepts, developing supplier partnerships, building teams of empowered employees, quality

circles, benchmarking and continuous improvement,

Reference Book(s)Pascal D., Lean Production Simplified, Productivity Press, 2007.Seliger G., Sustainability in manufacturing, Springer-Verlag, Berlin, 2007Sunil Chopra, Peter Meindl and D V Kalra, Supply Chain Management, Pearson Education, India, 2007

Mitra A., Fundamentals of Quality Control and Improvement, Pearson Education, 2nd Edition, 2001.

D H Besterfield et al, Total Quality Management, Pearson Education, 2008


7/7

CAD/CIM/CAE

CAD hardware and software, CAD tools, parametric curve, surface and solid modeling,

geometric transformations, CAD/CAM data exchange formats, collaborative design, static and

dynamics analysis of mechanical systems, and design of experiments.

Introduction to automation in manufacturing, manufacturing models and metrics, industrial

control systems, hardware components for automation and process control, numerical control of

machine tools and CNC part programming, industrial robotics, discrete control using PLC andcomputers, material transport systems, storage systems, automatic identification and data capture,

introduction to manufacturing systems, single-station manufacturing cells, manual assembly

lines, automated production lines, automatic assembly systems, cellular manufacturing,

inspection principles and technologies, machine vision, computer aided process planning.

Overview, discretization and interpolation, higher order and iso-parametric elements, element

and global matrices, assembly and numerical solution of system finite element equations.Application to solid mechanics problems, basic equations, analysis of trusses, beams, frames,

plates, three-dimensional and dynamics problems. Application heat transfer problems,

formulation and analysis of one-dimensional, two-dimensional and three-dimensional heat

transfer problems. Application to fluid-mechanics problems, basic equations, inviscid, viscousand non-Newtonian fluids.

Reference Book(s)Zeid I., Mastering CAD/CAM, Tata McGraw-Hill, 2006

V. R. Dukkipati and R. Bhat, Computer Aided Analysis and Design of Machine Elements, NAIL, 2002.D. Montgomery, Design of Experiments, Wiley India, 2005.Grover M. P., Automation, Production Systems, and Computer Integrated Manufacturing, Prentice Hall(Pearson), 3rd Edition, 2008.Rao S. S., The Finite Element Method in Engineering, Elsevier Butterworth Heinemann (Indian Edition),

4th Edition, 2005.

Documents

PhD Qualifying New Pattern