Remove Caps (#132058 and #132081). Change O-rings (#132059).
Remove Valves (#132080) and change O-rings
(#132076) – 2 pcs and O-rings (#132077) – 2 pcs.
#132055
#132054 #132072
#132073
#132074
#132085 #132056
#132075 #132057
#132083
#132080 #132077
#132076
#132081 #132058
#132059
#132084 #132082
Remove Stopper (#132060), unscrew Screws (#132028) with Washers
(#127014) and remove
Lock Washer (#132063).
Remove Pressure Flow Valve Hub (#132064) and change O-ring
(#132065) and O-ring (#132066).
Spout disassembling
Unscrew Decorative Screw Plug (#132068), remove Gasket (#132069)
and unscrew Spout (#132070). After that, you can find second Gasket
(#132069) and change these both gaskets.
#132060
#132028
#127014
#132063
#132064
#132065
#132066
#132068
#132069
#132070
#132069
Filling head disassembling
Remove Gasket (#132053). Unscrew Hub (#132052) and change Gasket
(#132051) and O-ring (#132050).
Unscrew Beer Flow Screw (#132049) and change O-ring
(#132048).
Unscrew Nut M35 (#132046) using Special Wrench (#132142) – not
included in the
package.
Remove Screws M4 (#127022) with Washers (#127014) and Shank
(#132087). After that, you
can change Gasket (#132086).
#132053 #132050
#132051
#132052
#132048
#132049 #132046
#132086
#127014
#127022
#132087
Unscrew Screw (#132011) and remove Left Cover (#132017), Right
Cover (#132014) and CrafTap Label (#132013). Remove Back Cover
assembly,
Clamping Bracket (#132034) and Outer Block (#132035)
Remove tubes with Tube Cover (#132033) from the Filling
Mechanizm.
Remove Screws M4 (#132094) with Washers (#132062) and Washer
(#132093). After that, you
can remove O-rings (#132092) – 3 pcs.
After Shank (#132091) unscrewing, you can change Gasket
(#132090).
