Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
|TABLE OF CONTENTS
TABLE OF CONTENTS
FLEXIBLE BOARDCONNECTIONS
FLEXIBLE MODULES
PRODUCT PORTFOLIO SUMIDA FLEXIBLE CONNECTIONS GMBH
FLEXIBLE FLATCABLES
PANTA FIX JUMPER
PANTA SMD PANTA FLL
PANTA FIX JUMPER
MCT – MATEABLE CONNECTION TECHNOLOGY
PANTA ZIF JUMPER
THT – THROUGH HOLE TECHNOLOGY
SMT – SURFACE MOUNT TECHNOLOGY
REFLOW
PANTA FIX CRIMP
HOTBAR
PANTA FFC PANTA MODULES
FIX JUMPER
PANTA FIX JUMPERS are highly flexible flat conductor connectors to circuit boards (PCBs). Solid
round conductors ensure a fast and safe assembly. The PANTA round-flat-round technology
combines both. The copper conductors are rolled flat to a defined geometry in the insulating area.
Ensuring the highest standards of vibration and bending resistance. The smooth notch-free transition
from round to flat guarantees fracture-safe connection points. The following materials can be used
for the insulation: Polyester, Aramid fiber, PEN (Polyethylenaphthalat) or Polyimide (Kapton®).
TECHNOLOGY
CHARACTERISTICS
| 1PANTA FIX JUMPER
Through Hole Technology (THT)
High vibration and bending resistance
Reliable and fracture-safe connection
Very easy handling
Immediately ready for installation
Economizes working time and assembly costs
Minimum space required
Wiring errors are avoided
Choice of various termination styles
Allows combination with male connectors
High-quality insulation materials (-40°C to +125°C)
Different pitches within one jumper available (MIX)
Short insulation lengths also available as wire jumpers
(without the flat rolled copper section)
BENEFITS
Please do not hesitate to ask for our
processing instructions for PANTA FIX Jumper.
1 | Transition
2 | optimized distribution
of stress
High vibration and bending resistance
Smooth notch-free transition from
flat to round
Fracture-safe connection point
Compensation of intrinsic vibrations
Reduction of tension in the soldering area
Avoidance of vibration resonances
ORDER CODE
A 05 - N 051 - A -
Pitch
e.g.
A=2,54 mm
See pitch code
Number of
pins
Insulation material
e.g.
P = Polyester
N = Aramid fiber
E = PEN
K = Polyimide
Insulation length
from 15-5000 mm
Special lengths
on request
Termination Style
e.g.
A = identical ends
AN = different
(see chart, combinations
on request)
Special designs
on request,
drawing required
A
PIN 1
B
PIN 1
C
PIN 1
Z
PIN 1
G
PIN 1
F
PIN 1
E
PIN 1
D
PIN 1
H
PIN 1
J
PIN 1
K
PIN 1
L
PIN 1
A
N
PIN 1
| 2PANTA FIX JUMPER
FIX JUMPER
The respective termination styles can be chosen separately for
each side and can also be combined with PANTA FLL-, PANTA
FIX CRIMP and PANTA ZIF-terminations.
TERMINATION STYLES (D-L ) starting with 1 mm pitcstarting with 1 mm pitch
TECHNICAL DATA
Order Code
Pitch
Max. number of pins
Length
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
U
0,8
32
0,3
0,254
30
0,5
80
0,5
100
200
2-3 µm tin-plated
15-5000
Cu acc. to DIN 40500; min. 1,5 µm tin-plated
E
1,00
32
0,3
0,32
28
0,7
80
1,0
200
700
G
1,25
32
0,3
0,32
28
0,75
90
1,5
200
700
B
1,27
32
0,3
0,32
28
0,75
90
1,5
200
700
L
1,90
32
0,3
0,40
26
1,35
110
2,0
200
1500
D
2,00
32
0,3
0,40
26
1,35
110
2,0
200
1500
F
2,50
32
0,3
0,51
24
1,5
110
3,5
300
1500
A
2,54
32
0,3
0,51
24
1,5
110
3,5
300
1500
Z
3,18
25
0,3
0,51
24
1,5
110
3,5
300
1500
P
3,5
23
0,3
0,51
24
1,5
110
3,5
300
1500
R
3,81
20
0,5
0,51
24
1,5
110
3,5
300
1500
C
5,08
16
0,5
0,51
24
1,5
110
3,5
300
1500
mm
mm
mm
mm
AWG
mm
µm
A
VDC
VDC/min
Insulation
With Pitch
American Wire Gauge
Insulation resistance
(grd-sig-grd)
Operation temperature
Soldering temperature
Polyester
-40 ... +105
250/4
Aramid fiber
-40 ... +125
260/5
2,54
24
10>10
PEN
-40 ... +125
260/5
Polyimide
-40 ... +125
260/5
mm
AWG
°C
°C/sec
D
A
B
C
G
D
A
B
C
G
G
| 3PANTA FIX JUMPER
FIX JUMPER
Ω
PANTA ZIF JUMPERS (FFC-Cable) are used for connecting printed circuit boards (PCBs)
Compatible with ZIF (Zero Insertion Force) or LIF (Low Insertion Force) connectors
Defined stripping of insulation and application of stiffener in the contact area provides secure
connection to all conventional connection systems (e.g. Iriso, FCI, Molex, Tyco, JST etc.)
Minimum dimensions through thin foils and small pitches
Fast assembly by simple insertion
High flexibility and bending resistance
Special versions available, e.g. LIF/ZIF pins can be combined with round solder pins
(PANTA FIX) or SMD solderable flat conductors (PANTA FLL)
Optional custom design of jumper mating area allows the use of specific connectors with
additiona l features. Specific punch at jumper ends provides a strain relief functionality and
connector position assurance (e.g. Iriso I-Lock or similar)
PRODUCT DESCRIPTION
ORDER CODE
ZIF - E 10 - P 100 - N -
Pitch
e.g.
E=1,00 mm
See pitch code
Number of pins
Insulation material
e.g.
P = Polyester
E = PEN
K = Polyimide
Insulation length
from 20-5000 mm
Special lengths
on request
Termination Style
e.g.
N = identical ends
NW = different
Special designs
on request,
drawing required
ZIF JUMPER
| 4PANTA ZIF JUMPER
| 5PANTA ZIF JUMPER
Low contact resistance
Increased number of mating cycles
Low current voltages
Prevention of whisker effect for small centerlines
Connection with Au-plated connectors
BENEFITS OF THE GOLD PLATING
CHARACTERISTICS
Available pitches 0,5; 0,8; 1,0; 1,25 and 2,54 mm
Temperature range -40°C … 105°C
Copper wire can be chosen for a customer-specific coating with nickel and gold (conductor material Ni: e.g. min. 0.3 µm, conductor material AuCo: 0.1 µm))
Customer-specific application of isolation material
Custom manufacturing of surgical exploration and reinforcements
CD-Player
Printer
Laptop
LC-Displays
Car-Radio
Satellite Receiver
Telephone ...
FIELD OF APPLICATION
ZIF JUMPER
TECHNICAL DATA
* customer specials on request
H
D
E
N
A
G
B
W
K
DE
E
AN1 N2
G
BW
H H
K K
20-5000
3-5 (5)
6-10 (10)
Tin-plated Cu - optional Ni/AuCo
Polyester, PEN, Polyimide
Polyester
(number of pins + 1) x pitch
(number of pins - 1) x pitch
0,3
10>10
-40 ... +105
I
0,5
70
0,5
3-5(4)
6-10(8)
0,30 x 0,10/0,05
0,5
30
E
1,00
30
1,0
*0,70 x 0,10/0,05
1,0
200
G
1,25
26
1,25
0,80 x 0,10
1,5
200
A
2,54
24
3,0
300
ZIF JUMPER
Order code
Pitch
Max. number of pins
Insulation length
Length of stripped insulationNominal size (standard)
Length of reinforcementNominal (standard)
Conductor material
Wire material*
Insulation
Reinforcing insulation
Total width
Pitch width
Total thicknessof contact area
Insulation resistance(grd-sig-grd)
Current rating at 20°C
Voltage rating
Operating temperature
Margin 2,54
1,50 x 0,10
| 6PANTA ZIF JUMPER
Ω
| 7PANTA SMD
SMD
The PANTA SMD System allows a flexible connection of PCBs.
These products can be automatically placed with standard equipment.
An additional mounting and soldering process of the components is not necessary.
Automatic placement by SMD assembly machines (Pick&Place capability)
Can be re-flow soldered
The SMD connection can be bended up to 180° after the soldering process (fig. 2)
Use on single and multilayer printed circuit boards
Operating temperature up to 125°C
No additional assembly and soldering process necessary
Cost effective alternative to e.g. flex-rigid printed circuit boards
Higher flexibility and break resistance compared to step milled PCBs
PRODUCT DESCRIPTION
CHARACTERISTICS
ADVANTAGES
1 | Jumper placement for reflow process
2 | Possible post bending options after reflow x
up to 180° c
Pitch: 0.93 mm
Bridge length: 11.2 mm
Total length: 15.2 mm
Number of pins: 4-25 of 0,93mm pitch
Packaging unit: 1500 pcs. on returnable reel
Special pitches and other pin counts on request
Customized SMD solutions available.
ORDER CODE
SMD - 22 - 093 - K - 083 -
Pitch
e.g. 0,93 mm
Number of pins
Insulation material
Insulation length
e.g. 8,3 mm
Special designs
on request,
drawing required
TECHNICAL DATA
Pitch
Number of pins
Insulation restistance
Complanarity
Min. bending radius
Max. bending cycle
Conductor material
Current rating at 20°C
Resistance against soldering heat:
Recommended reflow profile
Operation temperature
0,93
4 - 25
8 10
0,15
2,0
5 x 135°
Cu 150 µm Sn
2* (DIN EN 60512-5-2)
IPC / JEDEC J-STD 020 D
DIN EN 61760
-40°C to +125°C
mm
mm
mm
A
°C
| 8PANTA SMD
K = Polyimide
N = Aramid
fiber
SMD
±2
0,1
±4
0,1
±1,75 0,1
±14,2 0,1
±B 0,1
±C 0,3
0,3
±2,
1 0,
2A
33,0
380
(350
)
Feeding direction
(13,0 dia)
packaging examples
Ω
Compatible with PANTA FIX with round solder pins
Compatible with PANTA ZIF connections
Special versions of insulation foil (punching of holes or trenches)
Insulation material (e.g. Aramid fiber) suitable for thermode soldering/hot bar soldering
Immediately ready for installation
High vibration and bending resistance
Suitable for SMT (e.g. thermode soldering / hot bar soldering)
High-quality insulation materials (-40°C to +125°C)
Minimum dimensions through thin foils and small pitches
Standard contact zone 2.5 mm
Short bridging lengths available
PRODUCT DESCRIPTION
CHARACTERISTICS
ORDER CODE
FLL - A 05 - N 051 - 001
Pitch
e.g.
A=2,54 mm
See pitch code
Number ofpins
Insulation material
e.g.
P = Polyester
N = Aramid fiber
E = PEN
K = Polyimide
Insulation length
from 15-999 mm
Special lengths on
request
Special
Drawing required
| 9PANTA FLL
FLL
TECHNICAL DATA
Insulation
With pitch
American Wire Gauge
Insultion resistance
(grd-sig-grd)
Operating temperature
Soldering temperature
Polyester
-40 ... +105
250/4
Aramid fiber
-40 ... +125
260/5
0,5 - 2,54
24
10>10
PEN
-40 ... +125
260/5
Polyimide
-40 ... +125
260/5
mm
AWG
°C
°C/sec
Order code
Pitch
Number of pins
Length
Total width
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
I
0,5
6-50
0,3
100
0,5
30
100
U
0,8
4-30
0,5
100
1,0
100
300
E
1,00
4-30
0,7
100
1,0
200
700
G
1,25
2-30
0,8
100
1,5
200
1100
B
1,27
2-30
0,7
100
1,5
200
1100
D
2,00
2-16
1,35
100
2,0
200
1500
F
2,50
2-16
1,5
127
3,0
300
1500
A
2,54
2-16
1,5
127
3,0
300
1500
12 - 999; special lengths up to 5000
Cu acc. to DIN 40500; min. 1.0 µm tin-plated
mm
mm
mm
mm
µm
A
VDC
VDC/min
D
A
B
G
A
D
B
G
| 10PANTA FLL
(number of pins +1) x pitch
FLL
Ω
PANTA Crimp with TYCO contacts
• TYCO pin contacts
- 88117-x (gold-plated or tin-plated) on request
- 88976-x (gold-plated or tin-plated) on request
• TYCO socket contacts
- 2-487406-4 (tin-plated) PREFERRED TYPE
- 487406-X (gold-plated or tin-plated) on request
• TYCO solder pin
- 88997-2 (tin-plated) on request
Diverse HOUSINGS are available on request.
PANTA Crimp with Nicomatic contacts
• Nicomatic socket contacts series 14106
- 14106-12 (tin-plated) PREFERRED TYPE
- 14106-3210 (partially gold-plated) on request
• Nicomatic Rectangular terminal series 12410
• - 12410-12 (tin-plated) PREFERRED TYPE
- 12410-32 (partially gold-plated) on request
Diverse HOUSINGS are available on request.
We will be pleased to advise you.
Solution to connect flat cable to round cable applications or header devices
Assembly of foil crimp contacts from different manufacturers (e.g. Tyco,
Nicomatic) with PANTA FIX JUMPER or PANTA FLEX cables
Available pitches: 1.27 and 2.54 mm
Secure connection (e.g. housings with locking mechanism and coding)
Mate / unmateable space-saving connection
Socket, pin and solder pin contact versions are available
Available with tin- or gold-plated surfaces.
PRODUCT DESCRIPTION
CHARATERISTICS
TYCO Female Terminal 2-487406-4
CRIMPFLEX® system patented by NICOMATIC
| 11PANTA FIX CRIMP
FIX CRIMP
ORDER CODE
CRP - A 05 - P 051 - 001
Pitch
e.g.
A=2,54 mm
See pitch code
Number ofpins
Insulation material
e.g.
P = Polyester
N = Aramid fiber
E = PEN
K = Polyimide
Insulation length
from 30-999 mm
Special lengths on
request
Special
Drawing required
| 12PANTA FIX CRIMP
FIX CRIMP
TECHNICAL DATA
mm
.
mm
mm
mm
AWG
mm
µm
µm
.
A
VDC
VDC/min
Order code
Pitch
Compatible crimp contacts
Preferred type
Max. number of pins
Length
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
B
1,27
Tyco
1-487547-1(gold-plated)
32
0,32
28
0,75
100
Cu acc. to DIN 40500;tin-plated, 2 µm
0,5
80
200
A
2,54
Tyco MQS
929387-1(tin-plated)
32
0,40
26
1,27
110
Cu acc. to DIN 40500;tin-plated 3 µm
2,0
300
1500
Tyco
2-487406-4(tin-plated)
20
0,40
26
1,27
110
Cu nach DIN ;verzinnt,
2,0
Nicomatic
14106-12
(tin-plated)
32
0,51
24
1,5
120
Cu nach;verzinnt,
3,0
30 - 999 in steps of 1; special length up to 5000
0,8
PANTA FIX POWER assembled with PANCON connectors
MASCON series, Type CEH
• Pitch 3.96 mm, high power
• Number of pins: 2-8
• IDC termination (insulation displacement contact)
• Wire gauge AWG 19
• Solid wires
• Built-in polarization
• Coding with coding pin
• Current rating 6.0 A
• Operating voltage acc. to VDE 0110-1/04.97
• Operating temperature -55°C to 105°C
MASCON series, Type CEP (terminating connector)
• Pitch 2.54mm
• Number of pins: 2-15
• IDC termination (insulation displacement contact)
• Wire gauge AWG 21
• Solid wires
• Coding with coding pin
• Current rating 4.0 A
• Operating voltage acc. to VDE 0110-1/04.97
• Operating temperature -55°C to 105°C
High vibration and bending resistance
Reliable and fracture-safe connection
Ready for installation
Economizes working time and assembly costs
High productivity by simultaneous soldering of all connection points in the solder bath
Up to 12 amperes (soldered power jumper)
PRODUCT DESCRIPTION
CHARACTERISTICS
PANTA FIX POWER | 13
FIX POWER
A
PIN 1
B
PIN 1
C
PIN 1
ORDER CODE
POW- A 0 5 - N 051 - A - 001
Pitch
e.g.
A=2,54 mm
See pitch code
Number of pins
Insulation material
e.g.
P = Polyester
N = Aramid fiber
E = PEN
K = Polyimide
Insulation length
from 15-999 mm
Special lengths
on request
Termination style
e.g.
A = identical ends
AB = different
(see chart)
Special designs
on request,
drawing required
TERMINATION STYLES
| 14PANTA FIX POWER
FIX POWER
TECHNICAL DATA
Order code
Pitch
Max. number of pins
Length
Max. margin
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
PANTA FIX POWER JUMPER
F
2,5
15
1,0
0,72
21
2,0
200
8
A
2,54
15
1,0
0,72
21
2,0
200
8
P
3,5
8
1,0
0,91
19
3,2
200
12
N
3,96
8
1,0
0,91
19
3,2
200
12
M
5,0
8
1,0
0,91
19
3,2
200
12
C
5,08
8
1,0
0,91
19
3,2
200
12
K
7,0
8
1,0
0,91
19
3,2
200
12
J
7,5
8
1,0
0,91
19
3,2
200
12
25-999 in 0,1 steps; special lengths up to 5000
selectable up to 10
200
2-3 µm tin-plated
300
1500
mm
mm
mm
mm
mm
AWG
mm
µm
A
VDC
VDC/min
B
B
B
G
G
A
A
D
D
C
C
E2E1
| 15PANTA FIX POWER
FIX POWER
Insulation
With pitch
American Wire Gauge
Insulation resistance
(grd-sig-grd)
Operation temperature
Soldering temperature
Polyester
-40 ... +105
250/4
Aramid fiber
-40 ... +125
260/5
3,96
19
10>10
PEN
-40 ... +125
260/5
Polyimide
-40 ... +125
260/5
mm
AWG
°C
°C/sec
TECHNICAL DATA
Pitch
Number of pins
Length
Pin length
Termination styles
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
Pitch
Number of pins
Type of connection
Wire gauge
Conductor type
Polarization
Coding
Current rating
Operation voltage
Operation temperature
PANTA FIX POWER SYSTEMwith insulation displacement connector (IDC)
The POWER Jumper The HIGH POWER Connector
2,54
2-15
1,0
0,72
21
4
25 - 999
2,5 - 10
A,B or C
2,0/3,2
200
tin-plated 2-3 µm
300
1500
3,96 HI-POWER
2-8
IDC
19
solid
integrated
by pins
6
VDE 0110 b / 2,79 Table 4
-55 to 105
3,96
2-8
1,0
0,912
19
6
mm
mm
mm
mm
mm
AWG
mm
µm
A
VDC
VDC/min
mm
AWG
A
°C
The POWER Jumper - Insulation materials
E
B
G
A
D
C
| 16PANTA FIX POWER
FIX POWER
Ω
Flexibility through flat copper conductors
Highly vibration resistant
Reliable and fracture-safe connection
Minimum space required
Weight reduction
Suitable for signal and power distribution
High thermal resistance
High chemical resistance (meets automotive requirements)
Wiring errors are avoided
Hydrolyse resistance
Highest flexibility
Suitable for safety applications (e.g. air bags)
Savings of cost and time during the process by simple and fast assembly
PANTA FFCs are flat copper conductors of various dimensions laminated with high-quality insulation
foils. They combine minimum dimensions with the precisely - defined, constant electrical values.
PRODUCT DESCRIPTION
We offer customized FFCs for automotive, industry and customer applications. Based on the customer requirements we develop specific solutions for all areas of applications.
High-quality insulation foils in various thicknesses
Flat copper conductor in thicknesses of 35μm and above
Customer selection of copper width
Use of ZZZIP® copper strip technology from Wieland
Assurance of very tight tolerances by advanced manufacturing technologies
Marking of the FFCs according to your specifications
Highly precise window technologies
Selective stripping of copper conductors by laser processing
Punching technology for exposure of terminations Matrix connections available
Assembly services (resistance welding, crimping, soldering, overmolding, potting)
On request, we can produce the whole assembly for you.
CHARACTERISTICS
BENEFITS
| 17PANTA FFC
FFC
ORDER CODE
FFC - A 05 - P 1500 - 001
Pitch
e.g.
A=2,54 mm
See pitch code
Number ofpins
Insulation material
e.g.
P = Polyester
N = Aramid fiber
E = PEN
K = Polyimide
Insulation length
selectable above 15 mm
Special
Drawing required
A D
B B
G
TECHNICAL DATA*
Order Code
Pitch
Number of pins
Length
Max. margin
Min. margin
American Wire Gauge
Special wire gauges
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
E
1,00
0,3
30
-
1,0
200
700
G
1,25
0,3
30
-
1,5
200
700
B
1,27
0,3
28
30
1,5
200
700
D
2,00
0,3
26
24
2,0
200
1000
F
2,50
0,3
24
26
3,0
300
1500
A
2,54
0,3
24
26
3,0
300
1500
S
2,70
0,3
24
26
3,0
300
1500
Z
3,18
0,3
24
22
3,0
300
1500
P
3,50
0,3
24
22
3,0
300
1500
mm
mm
mm
mm
AWG
AWG
A
VDC
VDC/min
R
3,81
0,3
24
22
3,0
300
1500
N
3,96
0,3
24
22
3,0
300
1500
M
5,00
0,3
24
22
3,0
300
1500
C
5,08
0,3
24
22
3,5
300
1500
K
7,00
0,3
22
-
3,5
300
1500
J
7,50
0,3
22
-
3,5
300
1500
on request
selectable above 15 mm
selectable up to 10
Cu acc. to DIN 40500; min 1,5 µm tin-plated
Insulation
With pitch
American Wire Gauge
Insulation resistance
(grd-sig-grd)
Operating temperature
Soldering temperature
Polyester
-40 ... +105
250/4
Aramid fiber
-40 ... +125
260/5
2,54
24
10>10
PEN
-40 ... +125
260/5
Polyimide
-40 ... +125
260/5
mm
AWG
°C
°C/sec
A
D
B
B
G
G
| 18PANTA FFC
FFC
* customer specials on request
Ω
PANTA FLEXIBLE MODULES are customized applications.
PRODUCT DESCRIPTION
BENEFITS
Customized design
Meets customer requirements
Know-how of flexible connection technologies
Combinations of technologies (e.g. lamination and molding process)
| 19PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA FLEXIBLE FLAT CABLES or PANTA FLEXIBLE BOARD CONNECTIONS are assembled
with electronic components into a PANTA FLEXIBLE MODULE in our manufacturing process.
PANTA - TECHNICAL EQUIPMENT
LAMINATION
Laminating is the process used to embed the copper conductor in insulating foil by using pressure and heat. The foils are coated with adhesive on one side. The copper conductors are parallel to each other. Different pitches can be combined.
CUTTERS
The laminated rolls are slit to the final cable width. The lengths of the cables are produced by the cross cutting afterwards.
STRIPPING
The cable terminations are made in a stripping
process. The insulation is stripped off the copper
wires using a special cutter. The conductor ends
can then be processed further to the required
termination style with specific bending tools. (For
further information see PANTA FIX JUMPER on
page 2)
CRIMP-TECHNOLOGY
Crimp connections to flat conductors of 1.27 mm and 2.54 mm pitch are possible with the crimping technology from Tyco and Nicomatic. (For further information see PANTA FIX Crimp on page 11)
OVERMOLDING
Fully hydraulic injection molding machines can be used to overmold the cable ends of FFCs or to assemble FLEXIBLE MODULES. The maximum in-jection volume is 15 cm³ with a projected area of max. 75 cm².
| 20PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA - TECHNICAL EQUIPMENT
®POTTING WITH MACROMELT®Macromelt allows clean processability and does not
contain any solvents or other harmful substances. ®Macromelt is particularly suitable for applications
that require good adhesion to conductor or housing ®materials at low processing pressure. Macromelt is
injected with low pressure into the cavities. It spreads gently around even the tiniest components, seals and protects the components.
STIFFENERS
Special equipment places adhesive tapes and reinforcements onto our FFCs and ZIF jumpers.
LASER PROCESSING
A highly precise, powerful 300 W CO laser im-² plements fast and very flexible stripping modes.
SOLDERING
Selective soldering systems ensure optimum soldering while minimizing the heat stress for components. A reflow soldering system and place-ment systems are available for the assembly of SMD components.
| 21PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA - TECHNICAL EQUIPMENT
RESISTANCE WELDING
The contact between the components and PANTA cables by means of resistance welding ensures a safe interface of very high quality. Welded flexible modules are later potted or overmolded in order to secure the weld.
ASSEMBLY LINES
FAS - Flexible assembly systems ensure high quality modules even for lower volumes.
AAS - Automatic assembly systems produce high volumes of customized modules in fully auto-matic operation.
The optimal assembly line is selected after a technical and qualitative assessment of the customized module according to cost and pro-ductivity.
SUMIDA flexible connections GmbH
is ISO TS 16949 and ISO 14001 certified.
If you like to get further information we could provide a presentation about the topics PPAP, IMDS, ROHS/REACH, UL to you.
FLEXIBLEMODULES
The sale and delivery of the above mentioned products is always subject to our General Terms and Business Conditions. Please refer to the recent version of these terms under www.sumida-flexcon.com.
| 22PANTA FLEXIBLE MODULES
Version 08/2015