Embed Size (px)
DESCRIPTION
ovf file
Citation preview
System Setup
• Assign the target machine with:• 2 GB of RAM (for nested virtualization use 8 GB RAM)
• 300 GB harddrive (for the “C:” drive)
• 2 CPU Cores (for nested virtualization us 8 CPU Cores)
• Create Data Drives (requires at least one). For:• RAID 0 1 drive required
• RAID 5 3 drives required
• RAID 6 4 drives required
• NOTE: DO NOT start your machine until you followed the directions on the last page.
www.replibit.com [email protected] 888.978.3610
Download Replibit’s OVF
• Download link is:• http://replibit.net/isodownload/Replibit.zip
• Username is: replibit
• Password is: RepIs0#321
www.replibit.com [email protected] 888.978.3610
Installing
• Follow the screen shots in the following pages to install
• For technical support• Email: [email protected]
• Website with knowledge base: http://replibit.kayako.com
• Phone 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
www.replibit.com [email protected] 888.978.3610
Configuring Vmware ESXi 5.1 Settings
Step 1: import OVF
Step 2: add the four below values
NOTE: Please add the four values below to the Virtual
Machine configuration parameters before starting it.
The values can be added from Edit Settings >
Advanced > General > Configuration Parameters
vcpu.hotadd = "FALSE"
featMask.vm.hv.capable = "Min:1"
vhv.enable = "TRUE"
disk.EnableUUID = "true"
www.replibit.com [email protected] 888.978.3610
