Overview of the DBS3900 WCDMA Installation Scenarios(V200_02)

8/12/2019 Overview of the DBS3900 WCDMA Installation Scenarios(V200_02)

http://slidepdf.com/reader/full/overview-of-the-dbs3900-wcdma-installation-scenariosv20002 1/39

DBS3900 WCDMA

V200

Overview of the Installation

Scenarios

Issue 02

Date 2010-11-10

HUAWEI TECHNOLOGIES CO., LTD.









About This Document

PurposeThis document provides an overview of the installation scenarios of the DBS3900 WCDMA. It

describes the features of the application scenarios, associated auxiliary devices, power supply

devices, transmission equipment, installation procedures, and reference documents.

Product VersionThe following table lists the product version related to this document.

Product Name Product Name

DBS3900 WCDMA (hereinafter referred to

as DBS3900)

V200R010

V200R011

V200R012

V200R011

Intended AudienceThis document is intended for:

l Field engineers

Organization1 Scenario: BBU+APM+RRU

When 220 V AC input power or +24 V DC input power is available in a new DBS3900 site and

a new power supply system is required, the BBU+APM+RRU configurations can be used.

2 Scenario: BBU+TMC+RRU

When -48 V DC input power is available in a new DBS3900 outdoor site and a power supplysystem is required, the BBU+TMC+RRU configurations can be used.

DBS3900 WCDMA

Overview of the Installation Scenarios About This Document

Issue 02 (2010-11-10) Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

iii



3 Scenario: BBU+19-Inch Cabinet/Rack+RRU

For a DBS3900 indoor site, the BBU can be installed in a standard 19-inch-wide and 2 U-high

room. This is referred to as the BBU+19-inch cabinet/rack+RRU embedded configurations.

4 Scenario: BBU on the Indoor Wall+RRU

When the -48 V DC power is available at a DBS3900 indoor site, the BBU can be installed on

the indoor wall. This is referred to as the BBU on the indoor wall+RRU embedded

configurations.

5 Scenario: BBU+PS4890+RRU

When 220 V AC input power is available in a DBS3900 indoor site and a power backup system

is required, the BBU+PS4890+RRU configurations can be used.

6 Scenario: BBU+RRU3004 Rack+RRU

When -48 V DC input power is available in a new DBS3900 GSM indoor site, a power supply

system is required, and the BBU is installed in a small space indoors, the BBU+RRU3004 rack

+RRU configurations can be used.

7 Scenario: BBU+OMB+RRU

When -48 V DC or 220 V AC input power is available in a new DBS3900 outdoor site, a power

supply system is required, and the BBU is installed in a small space outdoors, the BBU+OMB


8 Scenario: BBU+ICR+RRU


baseband frame, the RRU can be installed in a RF support. This is referred to as the BBU+ICR

+RRU embedded configurations.

9 Scenario: BBU+IMB03+RRU

When 220 V AC input power or -48 V DC input power is available in a new DBS3900 site, the

BBU can be installed in a 19-inch-high and 3 U-wide IMB03, This is referred to as the BBU

+IMB03+RR U embedded configurations.

Conventions

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Indicates a hazard with a high level of risk, which if not

avoided,will result in death or serious injury.

Indicates a hazard with a medium or low level of risk, which

if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation, which if not

avoided,could result in equipment damage, data loss,

performance degradation, or unexpected results.

About This Document

DBS3900 WCDMA

Overview of the Installation Scenarios

iv Huawei Proprietary and Confidential


Issue 02 (2010-11-10)



Symbol Description

Indicates a tip that may help you solve a problem or save

time.

Provides additional information to emphasize or supplementimportant points of the main text.

General Conventions

The general conventions that may be found in this document are defined as follows.

Convention Description

Times New Roman Normal paragraphs are in Times New Roman.

Boldface Names of files, directories, folders, and users are in

boldface. For example, log in as user root.

Italic Book titles are in italics.

Courier New Examples of information displayed on the screen are in

Courier New.

Command Conventions

The command conventions that may be found in this document are defined as follows.


Boldface The keywords of a command line are in boldface.

Italic Command arguments are in italics.

[ ] Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... } Optional items are grouped in braces and separated by

vertical bars. One item is selected.

[ x | y | ... ] Optional items are grouped in brackets and separated by

vertical bars. One item is selected or no item is selected.

{ x | y | ... }* Optional items are grouped in braces and separated by

vertical bars. A minimum of one item or a maximum of all

items can be selected.

[ x | y | ... ]* Optional items are grouped in brackets and separated by

vertical bars. Several items or no item can be selected.

GUI Conventions

The GUI conventions that may be found in this document are defined as follows.

DBS3900 WCDMA

Overview of the Installation Scenarios About This Document



v




Boldface Buttons, menus, parameters, tabs, window, and dialog titles

are in boldface. For example, click OK .

> Multi-level menus are in boldface and separated by the ">"signs. For example, choose File > Create > Folder.

Keyboard Operations

The keyboard operations that may be found in this document are defined as follows.

Format Description

Key Press the key. For example, press Enter and press Tab.

Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt

+A means the three keys should be pressed concurrently.

Key 1, Key 2 Press the keys in turn. For example, pressing Alt, A means

the two keys should be pressed in turn.

Mouse Operations

The mouse operations that may be found in this document are defined as follows.

Action Description

Click Select and release the primary mouse button without moving

the pointer.

Double-click Press the primary mouse button twice continuously and

quickly without moving the pointer.

Drag Press and hold the primary mouse button and move the

pointer to a certain position.

About This Document

DBS3900 WCDMA


vi Huawei Proprietary and Confidential


Issue 02 (2010-11-10)



Contents

About This Document...................................................................................................................iii

1 Scenario: BBU+APM+RRU......................................................................................................1-1

2 Scenario: BBU+TMC+RRU......................................................................................................2-1

3 Scenario: BBU+19-Inch Cabinet/Rack+RRU.........................................................................3-1

4 Scenario: BBU on the Indoor Wall+RRU...............................................................................4-1

5 Scenario: BBU+PS4890+RRU...................................................................................................5-1

6 Scenario: BBU+RRU3004 Rack+RRU.....................................................................................6-1

7 Scenario: BBU+OMB+RRU......................................................................................................7-1

8 Scenario: BBU+ICR+RRU.........................................................................................................8-1

9 Scenario: BBU+IMB03+RRU....................................................................................................9-1

DBS3900 WCDMA

Overview of the Installation Scenarios Contents



vii





Figures

Figure 1-1 BBU+APM+RRU scenario................................................................................................................ 1-1

Figure 1-2 Installation procedure in the BBU+APM+RRU scenario.................................................................. 1-3

Figure 2-1 BBU+TMC+RRU scenario................................................................................................................ 2-1

Figure 2-2 Installation procedure in the BBU+TMC+RRU scenario.................................................................. 2-3

Figure 3-1 BBU+19-inch cabinet/rack+RRU scenario........................................................................................3-1

Figure 3-2 Installation procedure in the BBU+19-inch cabinet/rack+RRU scenario..........................................3-2

Figure 4-1 BBU on the indoor wall+RRU........................................................................................................... 4-1

Figure 4-2 Installation procedure in the BBU on the indoor wall+RRU scenario...............................................4-2

Figure 5-1 BBU+PS4890+RRU scenario.............................................................................................................5-2

Figure 5-2 Installation procedure in the BBU+PS4890+RRU scenario...............................................................5-3

Figure 6-1 BBU+RRU3004 rack+RRU scenario.................................................................................................6-2

Figure 6-2 Installation procedure in the BBU+RRU3004 rack+RRU scenario...................................................6-3

Figure 7-1 BBU+OMB+RRU scenario................................................................................................................7-1

Figure 7-2 Installation procedure in the BBU+OMB+RRU scenario..................................................................7-2Figure 8-1 BBU+ICR+RRU scenario.................................................................................................................. 8-1

Figure 8-2 Installation procedure in the BBU+ICR+RRU scenario.................................................................... 8-2

Figure 9-1 BBU+IMB03+RRU scenario............................................................................................................. 9-1

Figure 9-2 Installation procedure in the BBU+IMB03+RRU scenario ............................................................. 9-2

DBS3900 WCDMA

Overview of the Installation Scenarios Figures



ix





1 Scenario: BBU+APM+RRU

When 220 V AC input power or +24 V DC input power is available in a new DBS3900 site and

a new power supply system is required, the BBU+APM+RRU configurations can be used.

Overview of the Scenario

In this scenario, the BBU and transmission equipment are installed in the APM power cabinet

which provides outdoor protection for the BBU. The RRU can be installed flexibly. Diverse

combinations of the BBU, RRU, and auxiliary devices can meet different requirements, such as

power distribution, power backup, and large space for installing transmission devices.

Figure 1-1 shows the BBU+APM+RRU scenario.

Figure 1-1 BBU+APM+RRU scenario

The scenario has the following features:

DBS3900 WCDMA

Overview of the Installation Scenarios 1 Scenario: BBU+APM+RRU



1-1



l The APM power cabinet is classified into the APM30 (with the breathable film) and the

APM30H (with the heat exchanger). The APM power cabinet supplies -48 V DC power to

the BBU and RRU. In addition, the APM power cabinet performs battery management and

also monitoring and surge protection.

lThe APM30 (with the breathable film) can house 12 Ah or 24 Ah batteries, which supply power to the distributed NodeB for a short period of time. The Battery Backup Cabinet

(BBC), if required, can be configured to implement long-time power backup.

l The APM power cabinet can provide a maximum of 7 U space for installing transmission

equipment.

l The RRU supports flexible installation options. It can be installed on the wall, pole, and

tower.

Installation Procedure

Figure 1-2 shows the installation procedure in the BBU+APM+RRU scenario.

1 Scenario: BBU+APM+RRU

DBS3900 WCDMA


1-2 Huawei Proprietary and Confidential


Issue 02 (2010-11-10)



Figure 1-2 Installation procedure in the BBU+APM+RRU scenario

DBS3900 WCDMA

Overview of the Installation Scenarios 1 Scenario: BBU+APM+RRU



1-3






When -48 V DC input power is available in a new DBS3900 outdoor site and a power supply

system is required, the BBU+TMC+RRU configurations can be used.


In this scenario, the BBU and transmission equipment are installed in the transmission cabinet

(TMC) which provides outdoor protection for the BBU. The RRU can be installed flexibly.

Diverse combinations of the BBU, RRU, and auxiliary devices can meet different requirements,

such as power distribution, power backup, and large space for installing transmission equipment.

Figure 2-1 shows the BBU+TMC+RRU scenario.

Figure 2-1 BBU+TMC+RRU scenario


DBS3900 WCDMA

Overview of the Installation Scenarios 2 Scenario: BBU+TMC+RRU



2-1



l The TMC is classified into the TMC with the breathable film and TMC with the heat

exchanger (referred to as TMC11H). The TMC supplies the -48 V DC power to the BBU

and RRU.

l The TMC can provide a maximum of 7 U space for installing transmission equipment.

l The TMC can be configured with the heater.


tower.


Figure 2-2 shows the installation procedure in the BBU+TMC+RRU scenario.


DBS3900 WCDMA




Issue 02 (2010-11-10)



Figure 2-2 Installation procedure in the BBU+TMC+RRU scenario

DBS3900 WCDMA

Overview of the Installation Scenarios 2 Scenario: BBU+TMC+RRU



2-3







room. This is referred to as the BBU+19-inch cabinet/rack+RRU embedded configurations.


Figure 3-1 shows the BBU+19-inch cabinet/rack+RRU scenario.

Figure 3-1 BBU+19-inch cabinet/rack+RRU scenario


DBS3900 WCDMA

Overview of the Installation Scenarios 3 Scenario: BBU+19-Inch Cabinet/Rack+RRU



3-1



l The BBU can be installed in an existing 19-inch rack or cabinet. In this way, the power

supply system and the transmission system in the existing network can be shared.


Figure 3-2 shows the installation procedure in the BBU+19-inch cabinet/rack+RRU scenario.

Figure 3-2 Installation procedure in the BBU+19-inch cabinet/rack+RRU scenario


DBS3900 WCDMA




Issue 02 (2010-11-10)




When the -48 V DC power is available at a DBS3900 indoor site, the BBU can be installed on

the indoor wall. This is referred to as the BBU on the indoor wall+RRU embedded

configurations.


Figure 4-1 shows the BBU on the indoor wall+RRU scenario.

Figure 4-1 BBU on the indoor wall+RRU


l The BBU is installed on the indoor wall. Thus, the BBU occupies a small space and can

use the existing power supply system and transmission system.


Figure 4-2 shows the installation procedure in the BBU on the indoor wall+RRU scenario.

DBS3900 WCDMA

Overview of the Installation Scenarios 4 Scenario: BBU on the Indoor Wall+RRU



4-1



Figure 4-2 Installation procedure in the BBU on the indoor wall+RRU scenario


DBS3900 WCDMA




Issue 02 (2010-11-10)




When 220 V AC input power is available in a DBS3900 indoor site and a power backup system

is required, the BBU+PS4890+RRU configurations can be used.


In this scenario, the BBU and transmission equipment are installed in the PS4890. The RRU can

be installed flexibly. Diverse combinations of the BBU, RRU, and auxiliary devices can meet

different requirements, such as power distribution, power backup, and large space for installing

transmission equipment.

Figure 5-1 shows the BBU+PS4890+RRU scenario.

DBS3900 WCDMA

Overview of the Installation Scenarios 5 Scenario: BBU+PS4890+RRU



5-1



Figure 5-1 BBU+PS4890+RRU scenario


l The PS4890 supplies -48 V DC power to the distributed NodeB and provides a space of 7

U to 13 U for installing customer equipment.

l With the help of batteries, a maximum of 48 V 184 Ah backup power is supported.


Figure 5-2 shows the installation procedure in the BBU+PS4890+RRU scenario.


DBS3900 WCDMA




Issue 02 (2010-11-10)



Figure 5-2 Installation procedure in the BBU+PS4890+RRU scenario

DBS3900 WCDMA

Overview of the Installation Scenarios 5 Scenario: BBU+PS4890+RRU



5-3






When -48 V DC input power is available in a new DBS3900 GSM indoor site, a power supply

system is required, and the BBU is installed in a small space indoors, the BBU+RRU3004 rack



In this scenario, the BBU is installed in the RRU3004 rack which provides indoor protection for

the BBU. The RRU can be installed flexibly.

Figure 6-1 shows the BBU+RRU3004 rack+RRU scenario.

DBS3900 WCDMA

Overview of the Installation Scenarios 6 Scenario: BBU+RRU3004 Rack+RRU



6-1



Figure 6-1 BBU+RRU3004 rack+RRU scenario


l The RRU3004 rack can be installed on the wall, pole, and stand.

l The RRU supports flexible installation options. It can be installed on the wall, pole, andtower.


Figure 6-2 shows the installation procedure in the BBU+RRU3004 rack+RRU scenario.


DBS3900 WCDMA




Issue 02 (2010-11-10)



Figure 6-2 Installation procedure in the BBU+RRU3004 rack+RRU scenario

DBS3900 WCDMA

Overview of the Installation Scenarios 6 Scenario: BBU+RRU3004 Rack+RRU



6-3






When -48 V DC or 220 V AC input power is available in a new DBS3900 outdoor site, a power

supply system is required, and the BBU is installed in a small space outdoors, the BBU+OMB



In this scenario, the BBU is installed in the Outdoor mini Box (OMB) which provides outdoor

protection for the BBU. The RRU can be installed flexibly.

Figure 7-1 shows the BBU+OMB+RRU scenario.

Figure 7-1 BBU+OMB+RRU scenario


l The OMB supplies -48 V DC or 220 V AC power to the BBU and RRU.

l The OMB can be installed on the wall, pole, and stand.

DBS3900 WCDMA

Overview of the Installation Scenarios 7 Scenario: BBU+OMB+RRU



7-1




tower.


Figure 7-2 shows the installation procedure in the BBU+OMB+RRU scenario.

Figure 7-2 Installation procedure in the BBU+OMB+RRU scenario


DBS3900 WCDMA




Issue 02 (2010-11-10)





baseband frame, the RRU can be installed in a RF support. This is referred to as the BBU+ICR

+RRU embedded configurations.


Figure 8-1 shows the BBU+ICR+RRU scenario.

Figure 8-1 BBU+ICR+RRU scenario


l

The BBU can be installed in an existing ICR. In this way, the power supply system and thetransmission system in the existing network can be shared.

DBS3900 WCDMA

Overview of the Installation Scenarios 8 Scenario: BBU+ICR+RRU



8-1



l It supports installation of six RRUs in a centralized manner.


Figure 8-2 shows the installation procedure in the BBU+ICR+RRU scenario.

Figure 8-2 Installation procedure in the BBU+ICR+RRU scenario


DBS3900 WCDMA




Issue 02 (2010-11-10)




When 220 V AC input power or -48 V DC input power is available in a new DBS3900 site, the

BBU can be installed in a 19-inch-high and 3 U-wide IMB03, This is referred to as the BBU

+IMB03+RRU embedded configurations.


In this scenario, the BBU and power equipment are installed in the IMB03, and the RRUs are

installed in a flexible manner. The IMB03 provides protection for the BBU and power equipment

installed indoors.

Figure 9-1 shows the BBU+IMB03+RRU scenario.

Figure 9-1 BBU+IMB03+RRU scenario


DBS3900 WCDMA

Overview of the Installation Scenarios 9 Scenario: BBU+IMB03+RRU



9-1



l In the 220 V AC power supply scenario, the BBU and power equipment (AC/DC) are

installed in the IMB03. In the -48 V DC power supply scenario, the BBU and power

equipment (DC/DC) are installed in the IMB03.

l The IMB03 can be installed on the wall and stand.

l The RRU supports flexible installation options. It can be installed on the wall, pole, andtower.


Figure 9-2 shows the installation procedure in the BBU+IMB03+RRU scenario.

Figure 9-2 Installation procedure in the BBU+IMB03+RRU scenario


DBS3900 WCDMA




Issue 02 (2010-11-10)



DBS3900 WCDMA

Overview of the Installation Scenarios 9 Scenario: BBU+IMB03+RRU

Documents

Overview of the DBS3900 WCDMA Installation Scenarios(V200_02)