Embed Size (px)
Citation preview
mkgV dc
- subject
2005-07-04
Composed of 5 pages of test report and 75 of attachment
BFT S.p.A.Via Lago di Vico, 44
- model
- constructorVia Lago di Vico, 44 - 36015 Schio (VI)BFT S.p.A.
--------
Page 1 of 5RDP 13.01 Rev. 4 del 2005-03-12
The reproduction of this document is only permitted in complete copy.
Alessandro CibinMatteo DazzanLaboratory Technician Laboratory Technical Manager
- registration n°
---
2005-05-25
- date of arrival
- date of tests
151/05
Motor power
Width and height
2005-04-21
CERT 0117/05
Refers to
230
3,960X1,150- main characteristics
Not presentSensing edge
Weight gate 200
36015 - Schio (VI)
Test report n°
- date
- date
117- request
Gate with VIRGO motor
ORGANISMO NOTIFICATOPER LA CPD N° 1600
Sede Legale:
Sede Principale:
Unità Operativa:
c/o Camera di Commercio Industria Artigianato AgricolturaP.zza Borsa, 3/B 31100 Treviso (TV)Cod. Fisc. 80009550262P. IVA 00484170261Tel. 0422/5951www.tv.camcom.it
Centro Cristallo, Via Roma 431020 Lancenigo di Villorba (TV)Tel. 0422/608858 - Fax 0422/608866Videoconferenza 0422/[email protected]
CERT Centro di Certificazione e Test di Treviso TecnologiaVia Pezza Alta, 34 31046 Rustignè di Oderzo (TV)Tel. 0422/852016 - Fax 0422/852058Videoconferenza 0422/[email protected]
30,033,0
80 %80 %50 %50 %
- Description of the test:
- Notes: The test was carried out on a specimen prepared and installedby the firm BFT S.p.A. via Lago di Vico 44 - 36015 Schio (VI).
The test was carried out according to the UNI EN 12445(2002)regulation Point 5 and UNI EN 13241-1(2004) regulation Point4.3.3.
Opening slow-down torque:Closing slow-down torque:
12
123
Test n° Dynamic force [N]Point 1
Average
12 11
11,7
12 14 123
278 368
363,0Test n° Static force [N]
Point 1 Point 2 Point3
Point 2 Point3
- Machines / equipment used:
- Date of test:
- Set-up of test sample:
The average forces found are within the limits defined in the UNI EN 12453(2002) reg.
Test n° Dynamic force [N]Point 4
Page 2 of 5
The reproduction of this document is permitted only in complete copy.
FRD.PFP 13.32 Rev. 0 del 2005-04-06
2005-05-25
Average 13,3
112
Opening of the wing 50 mm, between the primary edge and the opposite edge
Test report n° 151/05
- Environmental conditions of test: Temperature:Humidity:
°C
3
% U.R.
Measurement of force - UNI EN 12453(2002) point 5
Opening of the wing 50 mm, between the primary edge and the opposite edgeThe average forces found are within the limits defined in the UNI EN 12453(2002) reg.
12 10 8
Test n°
1 0 32
Average
194
12,0 10,7
219188
200,3
258
255,7
368231 353
12
Point 5 Point 6
Final force [N]Point 1 Point 2 Point3
0
112
Test n° Static force [N]Point 4 Point 5 Point 6
159 206Average 106,3
155 2222 95 168 2041
160,7 210,7
1 18 1 62 8 3 7
1,7 11,03 14 1 20
Force tester Microtronics BlueForce.
Test n° Final force [N]
1 2 23 0 0 0
Average 0,3 0,7 1,7Test n° Dynamic time [s]
Point 1 Point 2 Point31 0,13 0,10 0,092 0,14 0,11 0,083 0,12 0,12 0,08
Average 0,13 0,11 0,08
Point 4 Point 5 Point 61 4 1 02 0 3 03 0 1 6
Point 4 Point 5 Point 6
Average 1,3 1,7 2,0
0,041 0,00 0,00 0,04
0,043 0,00 0,01 0,04
Opening torque:Closing torque:
Average 0,00 0,01
2 0,00 0,01
Test n° Dynamic time [s]
1
2
6
4
5
3
30,033,0
80 %80 %50 %50 %
- Description of the test:
- Notes: The test was carried out on a specimen prepared and installedby the firm BFT S.p.A. via Lago di Vico 44 - 36015 Schio (VI).
The test was carried out according to the UNI EN 12445(2002)regulation Point 5 and UNI EN 13241-1(2004) regulation Point4.3.3.
3
Static force [N]
12
10 23 15Point 10 Point 11 Point 12
12
AverageTest n°
3
Average
Force tester Microtronics BlueForce.
Test n° Final force [N]
12
The average forces found are within the limits defined in the UNI EN 12453(2002) reg.
01,7
3
Point 7 Point 8 Point 9
Opening slow-down torque:Closing slow-down torque:
Test n° Dynamic force [N]
8,7 6,3
267370350
328369
333,0
Point 9
Measurement of force - UNI EN 12453(2002) point 5
- Set-up of test sample:
°C% U.R.
Opening torque:
302
9,0
329,0
Opening of the wing 300 mm, between the primary edge and the opposite edgeThe average forces found are within the limits defined in the UNI EN 12453(2002) reg.
11 6 6
Test n° Final force [N]Point 7 Point 8
Average
2005-05-25
Opening of the wing 300 mm, between the primary edge and the opposite edge
Test report n° 151/05
- Environmental conditions of test: Temperature:Humidity:
382
- Machines / equipment used:
- Date of test:
Page 3 of 5
The reproduction of this document is permitted only in complete copy.
FRD.PFP 13.33 Rev. 0 del 2005-04-06
3
12
Test n° Static force [N]Point 7 Point 8 Point 9
384
365,7
331
9 58 11 881
23
Average
1 0 0 02 0 4 13 2 0 0
Average 0,7 1,3 0,3Test n° Dynamic time [s]
Punto 7 Punto 8 Punto 91 0,06 0,09 0,062 0,06 0,09 0,063 0,06 0,09 0,24
Average0 2
0,12
Test n° Dynamic force [N]Point 10 Point 11 Point 12
Average 0,06 0,09
0,00
137 139
12 25
12,0 23,3
0,040,00
Test n° Dynamic time [s]
1 0,00 0,00 0,04
0,00Average
23
0,08
185297 149 176139 146
215191,0 144,7 192,0
1114 22 16
14,0
Point 10 Point 11 Point 120 3 15 1 0
Closing torque:
0,050,03 0,00 0,04
0,3
Point 10 Point 11 Point 12
2,0
7
8
10
9
11
12
30,033,0
80 %80 %50 %50 %
- Description of the test:
- Notes: The test was carried out on a specimen prepared and installedby the firm BFT S.p.A. via Lago di Vico 44 - 36015 Schio (VI).
The test was carried out according to the UNI EN 12445(2002)regulation Point 5 and UNI EN 13241-1(2004) regulation Point4.3.3.
0,050,03 0,04 0,05
0,3
Point 16 Point 17 Point 18
0,0
0 0 00 0 0
9,7 7,3 8,3
Point 16 Point 17 Point 18
11 8 68 7 7
191 199 293192,7 208,3 288,7
278188 237 295199 189
Average
23
0,08 0,04 0,050,01
Test n° Dynamic time [s]
1 0,01 0,03 0,04
0,04
0,05
Test n° Dynamic force [N]Point 16 Point 17 Point 18
Average 0,09 0,08
3Average
0 00,0
3 0,09 0,09 0,052 0,09 0,07 0,051 0,10 0,09 0,05
Test n° Dynamic time [s]Point 13 Point 14 Point 15
1 1 2Average 0,3 0,3 1,0
123
Average
7 68 6 67
Test n° Static force [N]Point 13 Point 14 Point 15
Average 200,0
280
267,0
231290
12
- Machines / equipment used:
- Date of test:
Page 4 of 5
The reproduction of this document is permitted only in complete copy.
FRD.PFP 13.33 Rev. 0 del 2005-04-06
Point 14 Point 15
Opening of the wing 500 mm, between the primary edge and the opposite edge
Test report n° 151/05
- Environmental conditions of test: Temperature:Humidity:
3
Point 13
2005-05-25
1 0 0 12 0
2
AverageTest n°
Opening of the wing 500 mm, between the primary edge and the opposite edgeThe average forces found are within the limits defined in the UNI EN 12453(2002) reg.
8 8 9
Test n° Final force [N]
0 03
399,7
Measurement of force - UNI EN 12453(2002) point 5
- Set-up of test sample:
°C% U.R.
Opening slow-down torque:
Opening torque:Closing torque:
249170181
380426
1
Point 13 Point 14 Point 15Test n° Dynamic force [N]
393
7,7 7,0 7,0
Point 17
Closing slow-down torque:
Average
Force tester Microtronics BlueForce.
Test n° Final force [N]
12
The average forces found are within the limits defined in the UNI EN 12453(2002) reg.
1
Point 18
3
3
Static force [N]
12
10 7 12Point 16
13
14
16
15
17
18
30,033,0
80 %80 %50 %50 %
Average 0,08The average forces found are within the limits defined in the UNI EN 12453(2002) reg.
Opening torque:Closing torque:
2 0,083 0,09
Test n° Dynamic time [s]Point 20
1 0,08
3 0Average 0,0
1 02 0
Average 7,3Test n° Final force [N]
Point 20
2 63 8
Test n° Static force [N]Point 20
1 8
3 251Average 248,3
1 2672 227
Opening of the wing 500 mm, between the primary edge and the opposite edgePoint chosen by the laboratory
Test n° Dynamic force [N]Point 20
Average 0,22
2 0,003 0,00
Test n° Dynamic time [s]Point 19
1 0,66
9
1 62 33 1
Average 3,3
Point 19
Point 19
164140138
147,3
Force tester Microtronics BlueForce.
The average forces found are within the limits defined in the UNI EN 12453(2002) reg.
23
Average25
20,7Test n° Final force [N]
Point 19
Opening of the wing 500 mm, between the back edge and the adjacent sides
Test report n° 151/05
- Environmental conditions of test: Temperature:Humidity:
Test n° Dynamic force [N]
Static force [N]
281
Measurement of force - UNI EN 12453(2002) point 5
% U.R.- Set-up of test sample:
Opening slow-down torque:Closing slow-down torque:
Page 5 of 5
The reproduction of this document is permitted only in complete copy.
FRD.PFP 13.34 Rev. 0 del 2005-04-06
2005-05-25
- Machines / equipment used:
- Date of test:
123
AverageTest n°
°C
- Description of the test:
- Notes:
The test was carried out according to the UNI EN 12445(2002)regulation Point 5 and UNI EN 13241-1(2004) regulation Point4.3.3.The test was carried out on a specimen prepared and installedby the firm BFT S.p.A. via Lago di Vico 44 - 36015 Schio (VI).
19
20
