ONLINE ONLY AUCTION - Koster Industrieskosterindustries.com/wp-content/uploads/2017/11/brochure-GE-Light… · 551-A2P-3038 Buehler Mdl. Euromet-IV Grinder AIR COOLERS (2) Haskris

Surplus to the Ongoing Needs of:

GE LIGHTINGEuclid, Ohio – Dover, Ohio – Bridgeville, Pennsylvania

To Register For This Auction,

Please Visit

www.kosterindustries.com

GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]

Under Management of:ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERSCorporate Office:40 Daniel Street, Ste 2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779

Sale Presented By:

www.kosterindustries.com • e-mail: [email protected]

ONLINE ONLYAUCTION

ONLINE BIDDING ENDS: Wednesday, October 18th at 12:00 p.m. & Thursday, October 19th at 1:00 p.m. EDTONSITE INSPECTIONS: Monday, October 16th & Tuesday, October 17th from 8:00 a.m. to 4:00 p.m.

ONLINE BIDDING ENDS: Thursday, November 9th, 2017 at 1:00 p.m. ESTONSITE INSPECTION: Wednesday, November 8th from 8:00 a.m. to 4:00 p.m.

(3) LOCATIONS – (3) DAY SALE OVER 2,000 LOTS!

FEATURING: • LAB

EQUIPMENT• TOOLROOM• WIRE

DRAWING & FORMING

• PRESSES• FURNACES

& OVENS• BLENDERS• ROLLING

MILLS• PLUS MORE!

Online Bidding Through

gewarehouse.com

Rigaku Mdl. ZSX Primus II Spectrometer

Torin Mdl. T3S Fourslide Machine

Instron Mdl. 1125 Tensile Tester 100-Ton Schuler 1000KN C-Frame Eccentric Press

1OF 2

2008

2012

2

Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office: 978-474-4442 • Fax:978-474-4673www.kosterindustries.com • e-mail: [email protected]

ITEMS LOCATED IN EUCLID, OHIO 21800 Tungsten Road, Euclid, Ohio 44117

ONLINE BIDDING ENDS: Items on this page,

Wednesday, October 18th at 12:00 p.m. EDT

LAB EQUIPMENT

TENSILE TESTERS(2) Instron Mdl. 1125 Tensile Testers, with accessories, S/N’s: 6240; 6190

SPECTROMETERSRigaku Mdl. ZSX Primus II X-Ray Fluorescent Spectrometer, 35A, 60Hz, S/N: ER06110 (2008)

Eagle III EDAX XRF Micro Probe Spectrometer, with PC controls, S/N: 7322001

Perkin Elmer Optima 4300 DV Optical Emissions Spectrometer, with Poly Science regulator, S/N: 077N0101902 (Part N0770443)

Perkin Elmer Mdl. A-Analyst 200 Atomic Absorption Spectrometer, S/N: 20052090501 (Part B3150070)

Perkin Elmer Mdl. Optima 3000 Spectrometer, S/N: 069N5100301 (Part N069-0001)

Perkin Elmer Mdl. Optima 5300 DV Optical Emissions Spectrometer, S/N: 077N4086301 (Part N0770493)

Perkin Elmer Mdl. Lambda 20 UV/Vis Spectrometer, S/N: 101N9111621 (2003) (Part BUV20200)

Perkin Elmer Sciex Elan 5000 Mass Spectrometer, with Poly Science regulator, S/N: 258946380

X-RAY UNITScintag Inc. Mdl. 2000 XRD, XGEN 4000 X-Ray System, with 12-position sample chamber, Peltier detection system

ANALYZERLeeds & Northrup Mdl. Microtrac X100 Particle Analyzer, with 2 signal units

ELECTRON MICROSCOPEAmray Mdl. 1600 Turbo Scanning Electron Microscope

DIFFRACTION UNITX-Pert Pro Panalytical X-Ray Diffraction System, S/N: 12NC94300304601 (2006)

FURNACES & OVENSCentorr Mdl. LF-22-3000 Vacuum Furnace, 21.7kW S/N: 20869

Lindberg/Blue M Mdl. MO1490A-1 Oven, with 260°C max. temperature, S/N: T15P-506222

Leco Mdl. EF-400 Electrode Furnace, 777-800-500, with TC-436 Leco nitrogen/oxygen determinator, S/N: 3757

Leco Mdl. CS-444 Carbon/Sulfer Determinator, with Leco HF400 electrode furnace, S/N: 3790

Lab-Line Mdl. 8300P Oven, S/N: 0468

ALSO AVAILABLE: Large Quantity of Assorted Bench and Lab Ovens

TEST CHAMBEREspec Mdl. LHU-112 Humidity Cabinet Digital Controls, S/N: 1011002943

CUT-OFF SAWSAllied Mdl. 5-3000 TechCut 5 Abrasive Cut-Off Saw, 5,000 max. speed, S/N: T5-207A-J13 (2013)

Allied Mdl. 5-4000 PowerCut 10TM Abrasive Cut-Off Saw, 3,450 max. speed, S/N: PC10-081A-I13 (2013)

Struers Discotom-5 10" Lab Saw, 2,850–3,420 RPM spindle speeds, with coolant

Struers Discotom-5 5" Lab Saw, 2,850–3,420 RPM spindle speeds, with coolant system, cabinet base

(2) Buehler Mdl. Isomet Low Speed Saws, 11–1,180 RPM, 5" capacity

PRESSESApplied Research Lab Press, 160,000-lb. capacity, mold size 1/4" D 8,000–160,000; 1/2" D 40,000–200,000; 1" D 80,000–100,000, S/N: 6058

Spex 3630 X-Press Hydraulic Press

(5) Buehler Mounting Presses

LAPPERS & GRINDERS(2) Buehler Ecomet 6 Variable Speed Grinder/Polishers, with Ecomet 2 power head, S/N’s: 583ARP-03472; 551-A2P-3038

Buehler Mdl. Euromet-IV Grinder

AIR COOLERS(2) Haskris Mdl. R100 Air Cooler Water Chillers, S/N’s: HB16424; 23444

3

TOOLROOM

LATHES – Incl. Turret-TypeWarner & Swasey No. 3A Style M3500 Saddle-Type Turret Lathe, with 6-station turret, tool post, individual turret/saddle feeds, 3-jaw chuck, 6-1/4" H.T.S, 22–856 RPM, S/N: 2868811

Monarch 27" x 84" Geared Head Engine Lathe, 30-1/2" max. swing, complete with 3-jaw chuck, steady rest, threading dial, taper attachment, chip conveyor, tool post, 6–303 RPM

Cincinnati 19" x 114" Geared Head Engine Lathe, with 3- and 4-jaw chucks, face plate, steady rest, hydrashift, taper attachment, 17–653 RPM

Nardini Mdl. ND1740E 17"/24" x 40" Gap Bed Lathe, micrometer stop, threading dial, 25–2,000 RPM, 3-jaw chuck

Reiden 14"/28" x 60" Gap Bed Lathe, 36–1,780 RPM, complete with 3-jaw chuck, tool post, taper attachment, steady rest, follow rest, collet chuck, face plate

Monarch Mdl. 1610-16 16" x 54" Geared Head Engine Lathe, 12–1,500 RPM, complete with taper attachment, micrometer stop, threading dial, load meter, 3- and 4-jaw chucks, steady rest, follow rest, spindle speeds: 12–1,500 RPM, S/N: S2144

Monarch 10" x 20" Toolroom Lathe, 12-1/2" swing, 0–4,000 RPM, complete with collet chuck, 3- and 4-jaw chucks, face plate, steady rest, threading dial, taper attachment, S/N: 4162111-2020

Hardinge Mdl. HLV-H Toolroom Lathe, 6-1/2" x 20" with tool post, power feed to carriage, 125–3,000 RPM, 3-jaw chuck, draw bar, collets

Warner & Swasey No. 3A Turret Lathe

Kent Surface Grinder

Blanchard Rotary Surface Grinder

Nardini Mdl. ND1740E Gap Bed LatheHardinge HLV-H Lathe

VERTICAL TURRET LATHE

Webster Bennet 36" Vertical Turret Lathe, with 4-jaw chuck, 45" swing, 5-position turret, tilting head, torque indicator, 3-axis digital readout, S/N: 5656T2

GRINDERS – All Types

Blanchard Mdl. 11-20 20" Rotary Surface Grinder, solid wheel type load indicator, coolant neutrofier chuck control, S/N: B39-18-557

Blanchard Mdl. 11 Rotary Surface Grinder, 16" neutrofier chuck control, coolant, S/N: 9218

Kent Mdl. KG6-250AH Hydraulic Feed Surface Grinder, with (2) vise chucks, wheel dresser, and controls, S/N: 92075211 (1992)

Landis Mdl. 824 Hydraulic Power Feed Surface Grinder, 8" x 24" permanent magnetic chuck, coolant, S/N: 155-1

Armstrong Blum Mdl. 9 Series 9 Radial Hack Saw Machine, 9" x 16" work area, S/N: 98988

Boyar Schultz Mdl. HR818 Hand-Feed Surface Grinder, 8" x 18" permanent magnetic chuck, S/N: 18-10170-HR

Landis 12" x 36" Type CH Hydraulic Universal Grinder, power head stock, internal grinder spindle lube, S/N: 543-18




AIR CLEANERS(6) IQAir Swiss Made High Performance Hepa Air Cleaning Systems

ALSO AVAILABLE: (8) Boxes of Iqair H12/13C Hepa Filters; (10) Boxes of Iqair H12/13C Hepa Filters

LAB HOODS(2) TFI-Inline Lab Hood Plastic Construction Airflow Monitors, 60" wide x 5' long x 32" deep overall size, S/N’S: 456; 455

MISCELLANEOUS LAB PIECESMilestone Mdl. DMA-80 Microwave Laboratory System, with Direct Mercury analyzer, lab terminal, S/N: 01050031

Emitech Mdl. K450X Automatic Carbon Coater

Emitech Mdl. K350S Density Meter, S/N: 3505-071

Leco Mdl. DM-400 Microscope Hardness Tester, with camera system, Kashi meter, Takema printer

Zeiss Mdl. ICM405 Inverted Camera Microscope

Buehler Ecomet 250 Pro Grinder Polisher, 8" dia., and supplies

(2) Spex Industries Mill Mixers

(2) Spex Industries Mdl. 8511 Shatter Boxes

CEM Mdl. Mars 6 One Touch Tech Microwave Unit, 230/61, S/N: MJ1477

SCP Science Digi Prep-HP Digestion Block and Digital Controls

ALSO AVAILABLE: Large Quantities of Microscores, Hot Plates, Balance Scales, Techmet LaserMike Mdl. 183, Rockwell Hardness Testers, Sieves, Flame Proof Cabinets, Sanding Discs, Ultrasonic Cleaners, Much, Much More

Under Management of:GE Capital Jim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]

4





TOOLROOM – Continued

MILLING MACHINESCincinnati Mdl. 4-625-20-VHP Vertical Milling Machine, 25–2,500 RPM, 20" x 97" T-slotted table, power feed, S/N: 4J6V5T-1

Cincinnati Mdl. 4 Vertical Milling Machine, 18" x 80" T-slotted table, 16–1,600 RPM, 50 taper spindle, S/N: 4J4VIY-49

Clausing Kondia Mdl. FV-300 Vertical Milling Machine, with 11" x 59" power feel table, 60–4,000 RPM spindle, Acu-Rite III 2-axis digital readout, riser block, S/N: X-274

Bridgeport Series I Vertical Milling Machine, with 9" x 42" table, 60–4,800 RPM spindle speeds, S/N: 12BR-103537

Bridgeport Series J Vertical Milling Machine, with 9" x 42" power feed table, 80–2,720 RPM spindle speeds, Mitutoyo 2-axis digital read out, S/N: 71591

Bridgeport Series J Vertical Milling Machine, with 9" x 42" power feed table, 80–2,720 RPM spindle speeds, Mitutoyo 2-axis digital read out, S/N: 148440

(2) Bridgeport Series I Vertical Milling Machines, with 9" x 42" power feed table, 60–4,200 RPM spindle speeds, R-8 spindle, Acu-Rite 2-axis digital readout, 6" swivel base vise, S/N’s: 12BR-14869, 12BR-179994

KEYSEATERMorrison Keyseater Machine, S/N: K803721

SAWSDoAll Mdl. 2613-2 26" Vertical Bandsaw, with 30" x 30" tilting table, butt weld and grinding attachment, load indicator, variable speed drive, S/N: 127-66263

Rockwell Mdl. 28-3X5 20" Vertical Bandsaw, 24" x 24" tilting table, butt weld and grinding attachment, S/N: 1524099

Marvel 9/M6 Saw, 16" x 10" work area, S/N: 98635

Armstrong Blum Mdl. 9S/1 Series 9 Horizontal 9" x 16" Reciprocating Hack Saw, S/N: 99256-I

RADIAL DRILLArboga Type RLM3508 Approximately 8-3/4" x 33" Radial Arm Drill, 8-speed geared head, 70–1,350 RPM, with box table, S/N: 205992

Walker Turner 30" Radial Arm Drill

FABRICATING

SHEARSStamco 11Ga. x 8' Mechanical Sheet, hold downs, foot pedal controls, S/N: 1097

Peck & Stow Mdl. 14-U 6Ga. Mechanical Shear, 14-6A x 6' long, S/N: 651208

PIPE THREADERSOster Mdl. 784 Pipe Threader, 1/2" wall x 4" dia. pipe, 3/8" rod x 3" bolt, complete with dies and controls, S/N: 397811

Ridgid Mdl. 535 Pipe Threader, with dies, S/N: 397811

Williams Tool Pipe Threader, 6" capacity

BRAKESChicago Mdl. BP-414-6 4' x 14Ga. Finger Brake, S/N: 302860

Chicago Mdl. BPO-414-6 4' x 14Ga. Finger Brake, S/N: 305466

Mdl. BP1648 48" x 16Ga. Finger Brake, S/N: 7980

IRONWORKERT.R. Ryerson Mechanical Ironworker, with 1/2" plate, 5/8 x 6" flat bar, 1-1/2" square, 1-3/4" round, 4 x 4 x 3/8" angle, punch 13/16 throw 3/4" plate

PUNCHPullmax Single-Feed Punch, 42" throat

BLENDERS & MIXERS

Semco 100 Cubic Foot Blender, with ABB ACS 500 drive control, S/N: B52009

Semco Blender, 100 cubic feet capacity, 40HP motor, roller conveyor and scale, S/N: 54509

Patterson Kelley Twin Shell-V-Dry Blender, 350-lb. capacity, 1 cubic foot, S/N: 175371

Patterson Blender, approximately 100 cubic feet capacity, with roller conveyor and scale system

(2) Littleford Mdl. FKM 300-D Doper Mixers, S/N: 4992

(2) Rotary V-Benders

Littleford Doper Mixer with Fill Station Tank and Controls

Scrap Blender, approximately 60 cubic feet capacity with digital floor scale system

FURNACE TUBES

(10) Log Furnace Tubes, 294" long, 3-1/2" wide x 5" high ID

(9) Log Furnace Tubes, 3-1/2" interior dimension, 244" long

(9) Approximately 20' Long x 3-1/2" Internal Dimension Dia. Furnace Tubes

(50) Approximately 24' Long x 5-1/2 High x 3-1/2" Wide Internal Dimension Furnace Tubes

Cincinnati Mdl. 4 Vertical Mill

Semco Blender

Oster Mdl. 784 Pipe Threader

View Furnace Tubes

HAMMER MILL

Raymond Mdl. VHS05 Hammer Mill, with mill baghouse, stainless steel hopper and controls, S/N: 56258

Raymond Hammer Mill, with dust collector and stainless steel fill station hammer

(3) LOCATIONS(3) DAY SALE

OVER 2,000 LOTS!

To Register For This Auction, Please Visit


5


FURNACES

Pillar Induction Furnace, with load and unload tables, ADS controls and meters

#10 Log Furnace, approximately 12" x 12" opening, 4-zone, atmospheric with auto feed, chart recorder, Honeywell digital controls, Hearty roller load and unload chamber, 1,850°C max. temp, hydrogen fueled

“O” Furnace, 4-zone atmospheric, approximately 20' long x 8" high with (10) log tubes, 244" long x 5" high x 3-1/2" internal dimension, with turbo drum dumper, scale, discharge system blower, GE Quick Panel II Controls

General Electric Rotary Furnace, approximately 12" dia. x 40' long internal dimension, with hopper feed, stainless steel hopper, Cleveland blower, Crystal feed screw, baghouse discharge, digital scale and controls

Lettor Furnace, 62" wide x 9" high x 18' long furnace with controls system, power pack, 4-zones temperature gauge

No. 3 Vacuum Furnace, 28" dia. x 52" high ID, with load plate form, vacuum pump, electrics, control panel, S/N: 00-412011X8

No. 2 Vacuum Furnace, 28" dia. x 52" high ID, with load platform, stokes vacuum pump, electrics, control panel

ALSO AVAILABLE: Assorted Furnaces, good for parts

ALSO AVAILABLE: (2) Sections Navy Gun – to be used as an autoclave, 24' x 50" dia., taken off USS Colorado

WIRE DRAWING

Kocks Mdl. N500, 8-wire drawing head capacity induction heater, with General Electric SP-200 special purpose drive, Falk gear drive, Inductoheat induction furnace, parts picker, Kocks comparator, Kocks spare gear drawing heads, Kocks head rotator, control panel, warming box and spare parts, S/N: 34201

Kocks Mdl. N500 Machine




SIFTER SYSTEMS/UNITS/RELATED

7-Station Auto Sieve Fill Machine, with (5) VORD-SI portable sieves, (6) stainless steel hoppers, tubular hydraulic drum system, touch screen controls

Cleveland Mdl. FA-4848RE34-6 Vibrator Table, 48" x 48" size, new – never installed

5 Stage Hi-Vi Eriez Feeder System, with platform and drum roller

New Vibrating Sifter System, (4) skids, stainless steel, feeder vibrating table, sifter dump station, Rice Lake stainless steel hopper, optimized processing control with GE quick panelview unit

JVI Mdl. DTF-100X850 Vibrating Feed Unit, with drum hold station, and hopper, S/N: 2544

COMPRESSORS

(3) Cooper Gas Hydrogen Compressors, Class 3ATPCP, size 14-1/2 x 11, S/N’s: 10303C; 10303B; 10303A

PRESSES

(2) 600-Ton K.R. Wilson Hydraulic Angle Molding Presses,side rams, top ram, 12" height x 40" dia. work area, S/N’s: 2871

15-Ton Schuler Hydraulic C-Frame Press, top plate 15-1/2" long x 9" wide, S/N: 56040

AUTOCLAVE

Autoclave Engineers Isoframe Vertical Type, 6' deep x 27" dia. chamber, auto. part loader, digital display controls

HYDROGEN GENERATION PLANT

Hydrogen Generation Plant, consisting of capacity 450mm cubic feet, natural gas compressor, hydrogen recycle compressor, hydrogenerator, zinc oxide units (desulfurization), reformer, high temp shift, waste boiler, steam preheat coil, deaerator feed water exchanger, process gas cooler, process gas purification system, vent gas recovery tank, condensation drum, quench pumps and boil feed pumps, deaerator and water treatment with fisher valves, Jamesbury valves Warner W-UB manifold, Pennsylvania gas compressor, S/N: 10743, (1) parts only, S/N: 10726A and control room

Hydrogen Generation Plant

Autoclave Engineers Isoframe

Sifter Cat 7-Station Auto Sieve Fill Unit

6


ONLINE ONLYAUCTION




Hyster 5,000-Lb. Capacity Forklift

Genie Electric Portable Manlifts

Hyster 6,000-Lb. Capacity Forklift

AIR SCRUBBERS/DUST COLLECTORS/RELATED

(2) New Advance Air Tech Air Pollution Control System Scrubbers (Unit A), never installed, Hach digital controller, Walchem metering pump, toners and piping

(4) Torit Mdl. DFT 2-24 Cartridge-Type Dust Collectors, with blower and controls, S/N’s: IGO74215; IGO96085

Torit Donaldson Cartridge-Type Dust Collector, with Delta P digital controls

Torit Donaldson Mdl. DWS4 Portable Cartridge-Type Dust Collector, S/N: 2640261

Spencer Tubular Bag Separator System, S/N: 302023

MATERIAL HANDLING – Incl. Forklifts, Cranes, Manlifts, Etc.

Caterpillar Mdl. V50C 5,000-Lb. Capacity Forklift Truck, with yard tires, triple-mast, S/N: 38401807

Hyster Mdl. S50XM 5,000-Lb. Capacity Forklift Truck, with 3-stage mast, side shift, propane, S/N: D187V20126X

Hyster Mdl. HP60XM 6,000-Lb. Capacity Forklift Truck, with yard tires, 3-stage mast, side shift, propane, S/N: H177B07091V

Yale Mdl. GlC060TONUAR082 6,000-Lb. Capacity Forklift Truck with 3-stage mast, side shift, solid tire, propane, S/N: FC187V14542X

Yale Mdl. GTP050ZGNGAL084 4,000-Lb. Capacity Forklift Truck, with 3-stage mast, side shift, rotary forks, yard tires, propane, S/N: A875B10738X

Hyster E50XM-27 4,950-Lb. Capacity Electric Forklift Truck with 3-stage mast, side shift, solid tires, charger, S/N: F108V02148

Towmotor 4,000-Lb. Capacity Forklift Truck, propane, S/N: 46250825

Caterpillar Mdl. T40 4,000-Lb. Capacity Forklift Truck

(2) Hyster Mdl. N50XMAS 5,000-Lb. Capacity Electric Stand-and-Ride Forklift Trucks, with barrel attachment fork, and charger, S/N’s: C471N01533B; C471N01533B

Raymond Mdl. 20R30TT 3,000-Lb. Capacity Stand-and-Ride Forklift Truck, comes with charger, S/N: 020-82-21113

Hyster Mdl. N50XMA3 Electric Forklift Truck, no battery, S/N: C471N01534B

Gorbel Easy Arm 360° Free-Standing Jib Crane, 165-lb. capacity

Payloader Font-End Loader Diesel Engine, 8' bucket

(2) Genie Mdl. IPW24 350 Degree Electric Portable Manlifts

Torit DFT 2-24 Dust Collector

1OF 4

7





WELDERS & RELATED

Miller Syncrowave Mdl. 250 DX Tig Welder, 250-AMP, digital display and cables, S/N: LF4602751

Lincoln Mdl. Pro-Cut 60 Plasma Cutter, S/N: 01931216146

Lincoln Mdl. Ideal Arc 250-AMP Arc Welder

Lincoln Generator Mdl. Lincwelder 225 V.V.-D.C. Welding Power Source, with AC auxiliary power, Onan motor

BLAST CABINETS

Large Quantity of Assorted Reach-In Type and Self-Contained Shot Blast Units

PALLET WRAP & PACKAGING

Lantech Q Series Stretch Wrap Machine, 65" dia. turn table, approximately 80" high wrap

INSPECTION

Miscellaneous Inspection Items, Incl.: Micrometers, Gages, Gage Block Sets, Adjustable Micrometers, Indicator Stands, Bore Gage Sets, Profile Projectors

Nikon Mdl. Mdh-14B 14" Optical Comparator, 2-axis Quadra Chek 2000 digital readout, S/N: 10025

Rockwell Mdl. 4Gur Hardness Tester, S/N: 1942-880

XLO 809 14" Optical Comparator, S/N: 08090812

COMPRESSED AIR STORAGE TANKS

(6) Approximately 10-1/2' Dia. x 20' Long Compressed Gas Steel Storage Tanks

BEARINGS

LARGE QUANTITY OF ASSORTED BEARINGS

Compressed Air Storage Tanks

GENERATOR

Cummins Mdl. 680FDR5058FFW Generator Set, 625kVA, diesel powered with transfer switch, Redco Mdl. KR7FF/FFM standby generator control base, S/N: FK-90056-8/23-1

TRANSFORMER

Sunbelt Transformer, 2300V, dry-type, 1,000kVA, with 5-brake switch panel on loft, S/N: Sto714A35710-1-1

Online Bidding Through

gewarehouse.com

TREMENDOUS QUANTITIES OF SHOP SUPPORT ITEMS

Incl.: (More Than 50) Balance Scales, Optical Pyrometers, Drills, Taps, Reamers, End Mills, Counterbores, Tap and Die Sets, Machinery Skates, Milling Cutters, Broaches, C-Clamps, Tool Holders, Hand Tools, Machine Vises, Dividing Heads, Aloris Tool Posts, Collets, Swivel Vises, Boring Heads, Right Angle Heads, Electric/Pneumatic Hand Tools, Pedestal Fans, Heaters, Kurt Milling Vises, Storage Cabinets, Magnetic Base Drill, Shop Vacuums, Water Coolers, Box Staplers, Pumps, Valves, Heavy-Duty Material Handling Carts, Electrical Supplies, Motors, Cables, Hoists, Blowers, Hydraulic Pallet Jacks, Die Lift Trucks, Lifting Magnets, Generators,

Engine Hoists, Barrel Clamps, Transformers, Heavy-Duty Pallet Racks, Flame Proof Storage Cabinets, Vidmar Parts Cabinets, Etc.

To Register For This AuctionPlease Visit


ONLINE BIDDING ENDS: Wednesday, October 18th at 12:00 p.m. & Thursday, October 19th at 1:00 p.m. EDTONSITE INSPECTIONS: Monday, October 16th & Tuesday, October 17th from 8:00 a.m. to 4:00 p.m.

ONLINE BIDDING ENDS: Thursday, November 9th, 2017 at 1:00 p.m. ESTONSITE INSPECTION: Wednesday, November 8th from 8:00 a.m. to 4:00 p.m.

8


(3) Sleeper & Hartley Wire Forming/Cutoff Machines(3) Shuster Wire Straightening/Forming Machines

Torrington Mdl. V80 Verti-Slide Machines

WIRE DRAWING & RELATED

Draw Bench, approximately 65' long, 15HP, with vari-speed drive, Torrington 211 swager, small furnace 1/2" dia. opening, 800°C

Large Quantity of Dual and Multi-Station Fine Wire Drawing Machines, with furnaces and controls

(2) Wire Drawing Lines, Consisting of Torrington Mdl. 211 Swager Hot Drawing Box, Single Drum Winder

GTE Sylvania Mdl. 1389A16B1 8-Pass Wire Drawer Machine, S/N: 88

(8) Dual Wire Hot Box-Type Fine Wire Draw Benches

(3) Rice Lake Mdl. IQ710-2A Digital Bench Scales, with desk

(2) Winsmith Single-Station Hot Box-Type Fine Wire Drawing Machines, with de-spooler

(2) Mini-Morgan Stine 3-Drum Multi-Die Hot Box-Type Wire Drawing Machines, with digital controls

Mini-Morganstine Arboga Water Cooled 4-Drum Multi-Die Hot Box-Type Draw Bench, with Torrington 211 swager and controls

G.C. Patterson Mdl. 1A-COM-6 Wire Draw Bench

Continental Hydraulics Dual Pass Wire Drawing Machine, with guide and rapid air feed unit

(2) Nilson Mdl. 1B Wire Drawers, .050 capacity

Assorted Die Sizing Machines

Wire Cleaning Lines with Rectifiers

MULTI-SLIDE, 4-SLIDE MACHINES & WIRE FORMING

(2) Torin Mdl. T3S Fourslide Machines, 3/16" max. dia., (.187) 2.00" max. strip width, .062 max. strip thickness, 40–60 PPM, S/N’s: 177038FS; 189723FS

Bihler Mdl. MAC-1 Multi-Slide Machine, with coil reel, S/N: 22611

(2) Torrington Mdl. V80 Verti-Slide Machines, with .750 max. strip width, .032 max. strip thickness, .082 max. wire size, 200/500 SPM, coil stock stand, S/N’s: 129733FS; 1211693FS

(More Than 25) Assorted 4-Slide Machines, Incl. (7) No. 1 Bairds, Mdl. 00 Bairds, Nilson Mdls. S-0, S-00, Etc.

CNC Wire Forming Machine, with 8-slide

(3) Sleeper & Hartley Wire Forming/Cutoff Machines, with .050 max. wire capacity

(3) Shuster Wire Straightening/Forming Machines, with Power Flex vari-speed drive

Torrington Mdl. W-3001 Torsion Spring Winder, with 20–120 springs per minute, 1" dia. max. spring, S/N: 76087 (Asset #716)

ITEMS LOCATED IN DOVER, OHIO 200 West Broadway, Dover, Ohio 44622


Thursday, October 19th at 1:00 p.m. EDT

Large Quantity of Assorted Draw Dies

(3) Torrington Mdl. 433 Water Jacketed Compact Swagers

SWAGERS & SWAGING LINES

(3) Torrington Mdl. 433 Water Jacketed Compact Swagers, 2-die, with 5-1/8" capacity

Torrington Mdl. 312W Swager

Torrington Mdl. 312W Swager, with furnace and wire drum

(3) Torrington Mdl. 211 Swagers

PRESSES

100-Ton Schuler 1000KN C-Frame Eccentric Press, S/N: M01150/100/11/350/11 (new 2012) 30–90 SPM, stroke adj. 10–130mm (.394"–5.1") max. slide adj. 100M (3.93"), table dimension 950mm x 660mm (37.4" x 25.98"), digital controls, transfer unit, bowl feeds, etc.

ALSO: Quantity of RMT Presses, Rapid-Air Feed Units, Havin 5-Ton Press

9


BLOCKS

GE Bull Block, 20HP, with 18" dia. head, Fenner digital controls, Williamson temperature control device, 9' box

Vaughn Mdl. 13Sl Bull Block, with 18" dia. head, Williamson temperature control device, 9' box




Foerster Mdl. ECM Defectomat Eddy Current Testing Machine

ECM Defectomat Mdl. 2.841 Eddy Current Machine

Waterbury Farrell 3-High Rolling Mill

Waterbury Farrell 2-High Rolling Mill

2-High Rolling Mill

Quantity of Spare Rolls

20HP GE Bull Block

ROLLING MILLS

Waterbury Farrell 3-High Rolling Mill, with 36" wide x 14" dia. rolls, 150HP motor drive

(2) Farrell 2-High Rolling Mills, with approximately 4" wide x 6" dia. rolls, drive unit

2-High Rolling Mill, 5" wide x 4" dia. rolls, with unwind and rewind spool, rotary table

Waterbury Farrell 2-High Rolling Mill, approximately 1" wide x 4" dia.

ALSO: Quantity of Spare Rolls

EDDY CURRENT TESTER UNITS

Foerster Mdl. ECM Defectomat Eddy Current Testing Machine, 2.841, with Textronix Tos 1002B-2Channel digital storage oscilloscope with spooling bench

Foerster Mdl. 2.842 Eddy Current Testing Machine Defectomat CP, with digital oscilloscope wave with bench

ECM Defectomat Mdl. 2.841 Eddy Current Machine

Foerster Mdl. Defectomat E.Z. 2.828 Eddy Current Testing Unit, with test stand

INSPECTION/LAB/RELATED

Electronic Gauging Machines Mdl. CMS420 Balance Scales, Micrometers, Admet Mdl. SM-1000 Testing Units, Test Meters, Microscopes, Viscometers, Micrometers, Height Gages, ID and OD Gages, Admet Tensile Testers

Smart Scope 200 Zip Optical Gaging System, with PC controls

Retina Liner 101 Array and Inspection Unit, with Moorfeed vibratory bowl feeder

Gage Master Mdl. 29/GMXIE55 Series 20 13" Optical Comparator, with Gage Master GMX 2-axis digital readout

Jones & Lamson Mdl. Vertac-14 14" Optical Comparator

Gage Master Mdl. 29/GMXIE55 Series 20 13" Optical Comparator

Smart Scope 200 Zip Optical Gaging System

10





LATHES

Willis Machinery & Tools Mdl. SE2860 Gap-Type Geared Head Engine Lathe

Gemini Mdl. GE-5-680-S Geared Head Engine Lathe

Hardinge Mdl. HLVH Toolroom Lathes

Cincinnati No. 20M Centerless Grinder

Belmont CNC Sinker EDM

EDMs

Belmont Mdl. MX256 CNC Sinker EDM, with CVM output 100-AMP, tub size 59" x 60" x 24", Belmont CNC controls, S/N: HB11256343

Belmont Mdl. MX256 CNC Sinker EDM, tub size 44" x 26" x 18", PS output 100kVA, Belmont CNC controls, S/N: CB05246236

Belmont Mdl. MX256 CNC Sinker EDM

To Register For This Auction, Please Visit www.kosterindustries.com Online Bidding Through gewarehouse.com

American Pacemaker Hydraulic Duplicating Lathe, approximately 32" x 110", with spindle speeds 7–600 RPM, 24" dia. 4-jaw chuck, 2-1/2" hole thru spindle, S/N: 74076-54

Gemini Mdl. GE-680S 26" x 86" Geared Head Engine Lathe, with 18" 4-jaw chuck, 2-axis digital readout, spindle speeds 8–1,250 RPM, S/N: N5128-HV-480-F

Willis Machinery & Tools Mdl. SE2860 Approximately 28" x 60" Gap-Type Geared Head Engine Lathe, with spindle speeds 15–1,000 RPM, 20HP, 7" gap, 24" dia. 4-jaw chuck, 4" hole thru spindle, Acu-Rite 2-axis digital readout, inch/metric threading, S/N: 16014

Gemini Mdl. GE-5-680-S Approximately 26" x 68" Geared Head Engine Lathe, with inch/metric threading, 24" dia. 4-jaw chuck, spindle speeds 8–2,000 RPM, Acu-Rite 2-axis digital readout, 3" hole thru spindle

Monarch Mdl. 2516 24" x 72" Geared Head Engine Lathe, with 24" dia. 4-jaw chuck, 3" hole thru spindle, S/N: 47757 (1966)

Monarch Mdl. 2013X78 Geared Head Engine Lathe, with Easson ES-10 2-axis digital readout, spindle speeds 12–1,500 RPM, S/N: 45416 (1962)

Leblond Regal 19" x 80" Servo Shift Geared Head Engine Lathe, with inch/metric threading, 3" hole thru spindle, S/N: 13E-210

(2) Hardinge Mdl. HLVH Toolroom Lathes, with power carriage feed

American Pacemaker 14" x 30" Geared Head Engine Lathe, with spindle speeds 25–1,500 RPM, 16" dia. 4-jaw chuck, S/N: 74535-55

Sheldon Mdl. ES-56-10 8" x 32" Engine Lathe, with 3-jaw chuck, tool post, 50–1,600 RPM spindle speeds, S/N: ES-31974

11



ONLINE BIDDING ENDS:

Items on this page, Thursday,

October 19th at 1:00 p.m. EDT

GE Wire Butt Welder System

Crest Ultrasonic Cleaning System

Grav-i-Flo Mdl. C-4-806 Tumbling Barrel

C.I. Hayes Mdl. Lab Oven

Hem Mdl. V100HM-8 Vertical Bandsaw

MILLING MACHINES

Bridgeport Series I 2HP Vertical Milling Machine, with 9" x 48" power feed table, Mitutoyo 2-axis digital readout, spindle speeds 60–4,200 RPM, S/N: 236773

Bridgeport Series I 2HP Vertical Milling Machine, with 9" x 42" power feed table, Trak 2-axis digital readout, spindle speeds 60–4,200 RPM, vise and collets, S/N: 214032

Bridgeport 2J Vertical Milling Machine, with 9" x 42" power feed table, Anilam Wizard 900 digital readout, spindle speeds 60–4,200 RPM, S/N: 139351

Bridgeport 2J Vertical Milling Machine, with 9" x 48" table, power feed to table, Mitutoyo 2-axis digital readout, 67–2,720 RPM, S/N: 253577

GRINDERS – All Types

Cincinnati Mdl. Cinco 15 Centerless Grinder, S/N: 35028H5T-0133

(2) Cincinnati No. 20M Centerless Grinders

Blanchard No. 11 16" Rotary Surface Grinder, with solid wheel, S/N: 10201

Okamoto Mdl. 820N Hydraulic Power Feed Surface Grinder, with 8" x 20" magnetic chuck, neutrofier, S/N: 2511

Chevalier Mdl. FSG-618M Hand-Feed Surface Grinder, with 6" x 18" Walker permanent magnetic chuck, Sony 2-axis digital readout, S/N: A393B007

Brown & Sharpe Mdl. Micromast ER618 Power Feed Surface Grinder, with 6" x 18" magnetic chuck and rectifier

Harig Mdl. Super 612 Hand-Feed Surface Grinder, with 6" x 12" permanent magnetic chuck, S/N: 12278

Harig Mdl. Super 612 6" x 12" Hand-Feed Surface Grinder, with 6" x 12" Walker chuck, neutrofier, 2-axis digital readout, S/N: B13834

SAWS

Hem Mdl. V100HM-8 Vertical Bandsaw, with spare blades, S/N: 887206

DoAll Mdl. 1620-0 Vertical Bandsaw, with 16" cut, butt welding and grinding attachment, S/N: 277-70794

DoAll Mdl. 1812-0 18" Vertical Band Saw, with butt weld and grinding attachment, 24" x 24" table, S/N: 209-661232

Dake Johnson Mdl. V-16 Vertical Bandsaw, with welding and grinding attachment, S/N: 2541

Jet 7" x 10" Portable Horizontal Bandsaw

CLEANING & FINISHING

Grav-i-Flo Mdl. C-4-806 Tumbling Barrel, with (4) barrels, S/N: 162

Crest Ultrasonic Cleaning System, 10' overall x 16" wide, with ultrasonic tank and rinse tank, EZ Durapanel SE Series controls, (3) Crest Rigibot robots, Lanly electric oven, 5,000°F max. temperature, 460V, 3Ph, 60Hz, 89-AMPS, 14" x 14" opening, exit conveyor, S/N: 7178

Metal Wash Mdl. Mft25X12 Washing Machine, with 240-gal. wash/240-gal. rinse, roll feed and exit conveyor, S/N: 5429

FURNACES & OVEN

G.E. Furnace 2-Bay Ingot Heating Furnace, with (6) Watlow SCR heat controllers, 480V, hydraulic atmosphere, water cooled, control panel for purging gas, 6" high x 18" wide x 6' each bay, 1,500°C max. temperature, Honeywell readout

Rod Heating Furnace, premix, 3-zone and over temp, with Honeywell chart recorder, approximately 8" wide x 6" high x 19' long opening

C.I. Hayes Mdl. Lab Oven, 480V, .35kW, 6" wide wire mesh belt x 4" high, digital readout, S/N: 15941

WELDING & RELATED

GE Wire Butt Welder System, with controls, hydraulics, Inertia friction welder, .345 capacity

Special 3-Head Welder, with Unitek 250 power supply, digital readout

Miller Millermatic 211 Wire Feed Welder, 110V, S/N: MG141412N

Lincoln Electric 225 Precision Tig Welder, digital, S/N: U1141004990

Lincoln Idealarc R3S 250-AMP DC Power Source Stick Welder

Bridgeport Series I 2HP Vertical Milling Machine

Chevalier Mdl. FSG-618M Hand-Feed Surface Grinder

12


AIR COMPRESSORS

Ingersoll Rand Mdl. R37NEA-Nirvana-USD Premium Efficiency 50HP Rotary Screw Type Air Compressor, 145-PSIG, S/N: Nl1659U16073 (2016)

Ingersoll Rand Mdl. SSR Approximately 50HP Rotary Screw Type Air Compressor, S/N: F3964U91

Ingersoll Rand Mdl. CBV169719 30HP Air Compressor, 125-PSIG max., with Ingersoll Rand Intellisys controls

Speedaire Mdl. 1WD71 10HP Tank-Mounted Air Compressor, 2-stage, S/N: R0008748

Speedaire 10HP Vertical Tank-Mounted Air Compressor, S/N: R0014778

Speedaire Mdl. 1WD71 10HP 2-Stage Tank-Mounted Air Compressor, S/N: R0020944

QUANTITY OF SHOP SUPPORT

Incl.: Electric and Pneumatic Hand Tools, C-Clamps, Steel Stamps, Balance Scales, Lab Ovens, GE Fanuc Boards, Magnetic Base Drill, Gages, Knock Out Sets, Die Lift Tables, Payoff Reels, Die Lift Trucks, Transformers, Barrel Carts, Electrical Supplies, Fuses, Carbide Inserts, Diamond Grinding Wheels, Pumps, Hand Tools, Car Jack, Vidmar Tool Cabinets, Tool Chests, Tuggers, Drill Point Grinders, 2-Door Steel Storage Cabinets, Heavy-Duty Adjustable Steel Pallet Racks, Poly Storage Tanks, Cardboard Boxes, Self-Dumping Hoppers, Spoolers, Wire, Welding Wire, Flame Proof Storage Cabinets, Machine Belts, Work Benches and Vises, Assorted Hardware, Insulators, Rectifiers, Motors, Spare Parts, Scales, Spools, Hoists and Boom Lifts, Acorn Welding Tables, Pedestal Fans, Drill Presses, Sump Pumps, Roller Conveyor, Grinding Wheels, Aloris Tool Posts, Kurt Milling Vises, Collets, Rotary Tables, Chucks, Burning Gage and Torch Sets, Banding Carts, Shop Vacuums, and Much More

MISCELLANEOUS

Wysong 8' Shear, with back gage

Aim P270-5 Slug Cutter Payoff Reel

Plating Line Consisting of Spool Stand, (2) dip tanks, 10-station rewind stand (no rectifiers)

Intra Rack Stretch Wrap Machine 72" Rotary Table

Advanced Air Tech Air Scrubber System, complete with controls and blower unit, S/N: 151315

(10) Zebra Mdl. 110 x 111 Plus Label Printers

Aimco 500-lb. Capacity Pneumatic Lifting Unit

Large Quantity of Assorted Ircon Modline Two-Color Pyrometers, with Webcams infrared units

LIFT TRUCKS & RELATED

Toyota Mdl. 7FBCU20 2,000-Lb. Capacity Electric Fork Lift Truck, complete with battery charger, S/N: 70470

RC Series 3,000-Lb. Capacity Electric Stand-Up Riding Type Forklift Truck, with charger, S/N: 1A195983

Hyster Mdl. W40Z 4,000-Lb. Electric Pallet Jack Truck, with built-in charger, S/N: B218N27245L

Yale 3,000-Lb. Capacity Electric Walk-Behind Forklift Truck, S/N: N375926, no charger, bad battery

Lift-A-Loft Manlift Unit, with charger

Caldwell Approximately 4,000-Lb. Forklift Jib Crane Unit

ALSO AVAILABLE: Large Quantity of Overhead Cranes and Hoists

Large Quantity of Assorted Bearings

GAS STORAGE TANKS

(84) Gas Storage Tanks

Gas Storage Tanks

DUST COLLECTORS

Large Amount of Assorted Large Capacity Dust Collectors

WASTE TREATMENT

Kinetico Waste Treatment System, Consisting of CIX System, Carbon Filtration Skid, Cl17 Chlorine Analyzer, (4) Poly Tanks, (2) with agitators, Repressurization Pump Skid, Samsco SWE-11 600 Series Waste Water Evaporation Unit, with Allen Bradley Panelview 300 micro controls




50HP Ingersoll Rand Mdl. SSR Rotary Screw Type Air Compressor

50HP Ingersoll Rand Mdl. R37NEA Rotary Screw Type Air Compressor

30HP Ingersoll Rand Mdl. CBV169719 Air Compressor

13


Lincoln “Square Wave” Tig 255 Welder

Roper Whitney Pexto Mdl. 416E Sheet Metal Roller

52" Tennsmith Mdl. A52 Shear

15" x 42" Cincinnati Tray Top Lathe

15" x 40" Logan Powermatic Mdl. 1140010-D4H Lathe

Bridgeport 1HP Vertical Mill

ITEMS LOCATED IN BRIDGEVILLE, PENNSYLVANIA 540 Mayer Street, Bridgeville, Pennsylvania 15017


Thursday, November 9th at 1:00 p.m. EST

SHEET METAL EQUIPMENT

Chicago Dreis & Krump Mdl. BPO.414.6 48" x 14Ga. Finger Brake, S/N: 321158

Tennsmith Mdl. A52 Foot Shear, with manual back gauge, 52" wide, S/N: 14748

Roper Whitney Pexto Mdl. 416E 36" Hand Roller, S/N: 274-8-84

SAWS

DoAll Mdl. ML 16" Vertical Bandsaw, with blade welding attachment, 24" x 24" tilting table

Marvel Mdl. 9/E1/E10 Power Hacksaw, with manual clamping, coolant, S/N: 96321

WELDERS – All Types/ Plasma

Lincoln “Square Wave” Tig 255 Welder

Lincoln 225 Ranger Generator, 225-AMP, gas powered welder, S/N: K2857-1, 11597, U1100604958

Lincoln Idealarc 250 AC/DC 250-AMP Welder

Lincoln Invertec V300 Pro 300-AMP Welder, with Lincoln LN-10 wire feeder

Lincoln Power Mig 200 Portable Welder

Lincoln Pro-Cut 60 Plasma Cutting System, S/N: U951206680

Miller Millermatic 35S Portable 150-AMP Welder

Miller 2.5-kVA Spot Welder

GRINDING – All Types

Norton 6" x 18" Surface Grinder, with 6" x 18" permanent magnetic chuck

Harig 618 Hydraulic Surface Grinder

Black Diamond 10" Double-End Pedestal Grinder

Quantity Assorted Double-End Grinders

LATHES

Lodge & Shipley Approximately 40" x 72" Geared Head Engine Lathe, with 4-jaw chuck, spindle speeds 14–1,160 RPM

Cincinnati Tray Top 15" x 42" Geared Head Engine Lathe, with 3- and 4-jaw chucks, taper attachment, spindle speeds 37–1,470 RPM

Logan Powermatic Mdl. 1140010-D4H Approximately 15" x 40" Geared Head Engine Lathe, with 3-jaw chuck, S/N: 90129

Hendey 14" x 42" Lathe, with taper attachment, 3-jaw chuck, steady rest

MILLING MACHINES

(2) Bridgeport Vertical Milling Machines, with 9" x 42" power feed table, spindle speeds 80–2,720 RPM, S/N’s: 12BR179975; 12BR109372

Cincinnati Mdl. 2ML Vertical/Horizontal Milling Machine, with 9-1/2" x 54" table, power feed in all directions, spindle speeds to 1,500 RPM, S/N: 5J2P50-20

Milwaukee 1-1/2B Horizontal Milling Machine

ALSO AVAILABLE: Bridgeport Shaping Attachment

LAB

Perkin Elmer Lambda 12 UV/VIS Spectrometer

Buehler 2-Spindle Polishing Machine, with 8" wide wheel

Lindberg/Blue M Box-Type Lab Oven, with 1,200°C max. temperature, 4.5kW watts

Double Mounted Lindberg Type 51442 Electric Lab Oven, with 1,200°C max. temperature, 4,880 watts

(2) Lindberg Type 51442-S Electric Lab Ovens, with 1,200°C max. temperature, 4,880 watts

Dresser Mdl. 11-BR 12" Cut-Off Saw

Aminco 10" Diamond Saw

Chatillon Mdl. TCM200 Force Gage

Franklin Industries Ice Maker

Anter Corp. Manual Dilatometer

(3) Assorted Bausch & Lomb Microscopes

Manitowac Mdl. QPA310 Ice Maker, S/N: 041062579

Portable Dilatometer

O’Haus Brainweigh B3000D Electronic Scale

(5) Wood Top Work Benches

MATERIAL HANDLING/CRANES/HOISTS

3-Ton Capacity Overhead Bridge Crane, with 3-ton capacity electric hoist, top running, pendant controls, approximately 15' span

2-Ton Capacity Pittsburgh Design Monorail Crane, with 2-ton capacity electric hoist

(2) 1-Ton Capacity Contrax Cranes Jib Arms, with 1-ton capacity electric hoist

Nissan Mdl. WSN-40-TH 800-Lb. Capacity Battery Operated Walk-Behind Lift

(13) 3,000-Lb. Capacity Ergo-Lift Battery Operated Pallet Jacks

(2) Eagle 500 Series Electric Automatic Banding Machines, portable

2-Ton Capacity Hercules Free-Standing Gantry Crane, with C-M 2-ton capacity electric hoist

(2) Approximately 2,000-Lb. Capacity Scissor Lifts

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

AUCTIONEERS • APPRAISERS • LIQUIDATORS40 Daniel Street, Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779

IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 17% Buyer’s Premium will apply on all purchases. Payment must be made by certified funds or wire transfer. Company or personal checks will be accepted only if accompanied by a letter from the payor’s bank guaranteeing unqualified payment to Koster Industries Inc. All checks must be made payable to the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster Industries Inc. on balances due will be accepted with prior arrangement. No lot may be removed until complete settlement is made.

IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should available themselves of the opportunity to make inspection prior to the sale.

IMPORTANT NOTICE: Nothing herein shall be construed as (i) constituting the creation of an agency, partnership, joint venture, fiduciary or similar relationship between GE and any person; (ii) an approval or commitment to sale by GE to any person; and all transactions are subject to final investment/compliance approval by GE and the execution of mutually satisfactory definitive documentation; (iii) any guarantee or promise of pricing terms or availability thereof which may fluctuate or cease to be available depending on any change in the relevant market. All sales of available equipment will be “as is”, “where is”, with all faults, without recourse or warranty of any kind or nature, express or implied; and subject to detailed terms and conditions of sale of the equipment owner/seller.

Surplus to the Ongoing Needs of: GE LIGHTING – (3) LOCATIONS – (3) DAY SALE – OVER 2,000 LOTS! Euclid, Ohio; Dover, Ohio; Bridgeville, Pennsylvania

Koster Industries Inc., OH License 2016000075 • Randall G. Koster, OH License 2016000073

Koster Industries Inc., PA License AY000096L • Randall G. Koster, PA License AU002649L

QS-0039691

Online Bidding Through gewarehouse.com

ITEMS LOCATED IN BRIDGEVILLE, PENNSYLVANIA 540 Mayer Street, Bridgeville, Pennsylvania 15017


Thursday, November 9th at 1:00 p.m. EST

View of Bearings and Sprockets

Partial View of Motors

75HP Kaeser Mdl. CSD-75 Rotary Screw Type Air Compressor

75HP Kaeser Mdl. CS91 Rotary Screw Type Air Compressor

AIR COMPRESSORS & DRYER

Kaeser Mdl. CSD-75 75HP Rotary Screw Type Air Compressor, 125-PSIG, with Kaeser Sigma control, S/N: 1097

Kaeser Mdl. CS91 75HP Rotary Screw Type Air Compressor, 110-PSI, with Kaeser control

Hankinson Mdl. PR700 Compressed Air Dryer, 700-SCFM @ 100-PSIG capacity, S/N: 0366-5T-9412-0010

MISC. MACHINERY & EQUIP.

Greenlee Mdl. 800 Hydraulic Bender

H-Frame Hydraulic Press, with Blackhawk approximately 5-ton hydraulic unit, Enerpac jack, 34" distance between uprights

(2) Donaldson Power Core Dust Collectors

Torit Donaldson Box-Type Dust Collector

North American Gas Train

Allen 17" Floor-Type Drill Press

Cincinnati 24" Floor-Type Drill Press, with 22" dia. table

(6) Sections Accordion-Type Portable Conveyors

MISC. SHOP ITEMS

Incl.: Bearings, Assorted Steel Work Tables, Air Hose Reels, Assorted Drill Bits, Electric Hand Tools, Steel Storage Cabinets, Bench Vises, Milling Vises, Cabinet with Hardware, Assorted Pulleys and Couplings, Assorted Gears, Assorted Grinding Wheels, Quantity of Boston Gear Motors, Assorted V-Belts, Miscellaneous Screws and Hardware, Steel Shelving, Quantity of Electrical Wire, Large Quantity of Assorted Bearings, Quantity of Assorted Motors, Gold Medal Mdl. 2186 Deluxe Servalot Nacho Machine, Gold Metal Popcorn Machine, Assorted Water Containers, (12) Rolling Cage Carts, (2) Hertner 24-Volt Battery Chargers, Saf-T-Cart Tank Cart, Assorted Electrical Boxes, Quantity of Electrical Contacts, Electrical Control Centers, Transformers, Assorted Motor Driven Pumps, (20) 6' x 6' Jersey Barriers, Etc.

<X-pert Pro X-Ray Diffraction System

Documents

ONLINE ONLY AUCTION - Koster Industrieskosterindustries.com/wp-content/uploads/2017/11/brochure-GE-Light… · 551-A2P-3038 Buehler Mdl. Euromet-IV Grinder AIR COOLERS (2) Haskris